- 30 May, 2018 33 commits
-
-
Dmitry Torokhov authored
[ Upstream commit 2bc4298f ] When Synaptics protocol is disabled, we still need to try and detect the hardware, so we can switch to SMBus device if SMbus is detected, or we know that it is Synaptics device and reset it properly for the bare PS/2 protocol. Fixes: c378b511 ("Input: psmouse - factor out common protocol probing code") Reported-by:
Matteo Croce <mcroce@redhat.com> Tested-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alex Williamson authored
[ Upstream commit aa008206 ] The Marvell 9128 is the original device generating bug 42679, from which many other Marvell DMA alias quirks have been sourced, but we didn't have positive confirmation of the fix on 9128 until now. Link: https://bugzilla.kernel.org/show_bug.cgi?id=42679 Link: https://www.spinics.net/lists/kvm/msg161459.htmlReported-by:
Binarus <lists@binarus.de> Tested-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Anna-Maria Gleixner authored
[ Upstream commit 91633eed ] So far only CLOCK_MONOTONIC and CLOCK_REALTIME were taken into account as well as HRTIMER_MODE_ABS/REL in the hrtimer_init tracepoint. The query for detecting the ABS or REL timer modes is not valid anymore, it got broken by the introduction of HRTIMER_MODE_PINNED. HRTIMER_MODE_PINNED is not evaluated in the hrtimer_init() call, but for the sake of completeness print all given modes. Signed-off-by:
Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: Christoph Hellwig <hch@lst.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: keescook@chromium.org Link: http://lkml.kernel.org/r/20171221104205.7269-9-anna-maria@linutronix.deSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Subash Abhinov Kasiviswanathan authored
[ Upstream commit 83f1999c ] ipv6_defrag pulls network headers before fragment header. In case of an error, the netfilter layer is currently dropping these packets. This results in failure of some IPv6 standards tests which passed on older kernels due to the netfilter framework using cloning. The test case run here is a check for ICMPv6 error message replies when some invalid IPv6 fragments are sent. This specific test case is listed in https://www.ipv6ready.org/docs/Core_Conformance_Latest.pdf in the Extension Header Processing Order section. A packet with unrecognized option Type 11 is sent and the test expects an ICMP error in line with RFC2460 section 4.2 - 11 - discard the packet and, only if the packet's Destination Address was not a multicast address, send an ICMP Parameter Problem, Code 2, message to the packet's Source Address, pointing to the unrecognized Option Type. Since netfilter layer now drops all invalid IPv6 frag packets, we no longer see the ICMP error message and fail the test case. To fix this, save the transport header. If defrag is unable to process the packet due to RFC2460, restore the transport header and allow packet to be processed by stack. There is no change for other packet processing paths. Tested by confirming that stack sends an ICMP error when it receives these packets. Also tested that fragmented ICMP pings succeed. v1->v2: Instead of cloning always, save the transport_header and restore it in case of this specific error. Update the title and commit message accordingly. Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Paolo Bonzini authored
[ Upstream commit 51776043 ] This ioctl is obsolete (it was used by Xenner as far as I know) but still let's not break it gratuitously... Its handler is copying directly into struct kvm. Go through a bounce buffer instead, with the added benefit that we can actually do something useful with the flags argument---the previous code was exiting with -EINVAL but still doing the copy. This technically is a userspace ABI breakage, but since no one should be using the ioctl, it's a good occasion to see if someone actually complains. Cc: kernel-hardening@lists.openwall.com Cc: Kees Cook <keescook@chromium.org> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Takashi Iwai authored
[ Upstream commit c469652b ] The commit ffcd28d8 ("ALSA: hda - Select INPUT for Realtek HD-audio codec") introduced the reverse-selection of CONFIG_INPUT for Realtek codec in order to avoid the mess with dependency between built-in and modules. Later on, we obtained IS_REACHABLE() macro exactly for this kind of problems, and now we can remove th INPUT selection in Kconfig and put IS_REACHABLE(INPUT) to the appropriate places in the code, so that the driver doesn't need to select other subsystem forcibly. Fixes: ffcd28d8 ("ALSA: hda - Select INPUT for Realtek HD-audio codec") Reported-by:
Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # and build-tested Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
NeilBrown authored
[ Upstream commit dce2630c ] There are 2 comments in the NFSv4 code which suggest that SIGLOST should possibly be sent to a process. In these cases a lock has been lost. The current practice is to set NFS_LOCK_LOST so that read/write returns EIO when a lock is lost. So change these comments to code when sets NFS_LOCK_LOST. One case is when lock recovery after apparent server restart fails with NFS4ERR_DENIED, NFS4ERR_RECLAIM_BAD, or NFS4ERRO_RECLAIM_CONFLICT. The other case is when a lock attempt as part of lease recovery fails with NFS4ERR_DENIED. In an ideal world, these should not happen. However I have a packet trace showing an NFSv4.1 session getting NFS4ERR_BADSESSION after an extended network parition. The NFSv4.1 client treats this like server reboot until/unless it get NFS4ERR_NO_GRACE, in which case it switches over to "nograce" recovery mode. In this network trace, the client attempts to recover a lock and the server (incorrectly) reports NFS4ERR_DENIED rather than NFS4ERR_NO_GRACE. This leads to the ineffective comment and the client then continues to write using the OPEN stateid. Signed-off-by:
NeilBrown <neilb@suse.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Peter Zijlstra authored
[ Upstream commit 30c7e5b1 ] Zhang Rui reported that a Surface Pro 4 will fail to boot with lapic=notscdeadline. Part of the problem is that that machine doesn't have a PIT. If, for some reason, the TSC init has to fall back to TSC calibration, it relies on the PIT to be present. Allow TSC calibration to reliably fall back to HPET. The below results in an accurate TSC measurement when forced on a IVB: tsc: Unable to calibrate against PIT tsc: No reference (HPET/PMTIMER) available tsc: Unable to calibrate against PIT tsc: using HPET reference calibration tsc: Detected 2792.451 MHz processor Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: len.brown@intel.com Cc: rui.zhang@intel.com Link: https://lkml.kernel.org/r/20171222092243.333145937@infradead.orgSigned-off-by:
-
Hector Martin authored
[ Upstream commit 18877518 ] At least some JMicron controllers issue buggy oversized DMA reads when fetching context descriptors, always fetching 0x20 bytes at once for descriptors which are only 0x10 bytes long. This is often harmless, but can cause page faults on modern systems with IOMMUs: DMAR: [DMA Read] Request device [05:00.0] fault addr fff56000 [fault reason 06] PTE Read access is not set firewire_ohci 0000:05:00.0: DMA context IT0 has stopped, error code: evt_descriptor_read This works around the problem by always leaving 0x10 padding bytes at the end of descriptor buffer pages, which should be harmless to do unconditionally for controllers in case others have the same behavior. Signed-off-by:
Hector Martin <marcan@marcan.st> Reviewed-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
Jim Mattson authored
commit 1eaafe91 upstream. If there is a possibility that a VM may migrate to a Skylake host, then the hypervisor should report IA32_ARCH_CAPABILITIES.RSBA[bit 2] as being set (future work, of course). This implies that CPUID.(EAX=7,ECX=0):EDX.ARCH_CAPABILITIES[bit 29] should be set. Therefore, kvm should report this CPUID bit as being supported whether or not the host supports it. Userspace is still free to clear the bit if it chooses. For more information on RSBA, see Intel's white paper, "Retpoline: A Branch Target Injection Mitigation" (Document Number 337131-001), currently available at https://bugzilla.kernel.org/show_bug.cgi?id=199511. Since the IA32_ARCH_CAPABILITIES MSR is emulated in kvm, there is no dependency on hardware support for this feature. Signed-off-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Fixes: 28c1c9fa ("KVM/VMX: Emulate MSR_IA32_ARCH_CAPABILITIES") Cc: stable@vger.kernel.org Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Wei Huang authored
commit c4d21882 upstream. The CPUID bits of OSXSAVE (function=0x1) and OSPKE (func=0x7, leaf=0x0) allows user apps to detect if OS has set CR4.OSXSAVE or CR4.PKE. KVM is supposed to update these CPUID bits when CR4 is updated. Current KVM code doesn't handle some special cases when updates come from emulator. Here is one example: Step 1: guest boots Step 2: guest OS enables XSAVE ==> CR4.OSXSAVE=1 and CPUID.OSXSAVE=1 Step 3: guest hot reboot ==> QEMU reset CR4 to 0, but CPUID.OSXAVE==1 Step 4: guest os checks CPUID.OSXAVE, detects 1, then executes xgetbv Step 4 above will cause an #UD and guest crash because guest OS hasn't turned on OSXAVE yet. This patch solves the problem by comparing the the old_cr4 with cr4. If the related bits have been changed, kvm_update_cpuid() needs to be called. Signed-off-by:
Wei Huang <wei@redhat.com> Reviewed-by:
Bandan Das <bsd@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
David Hildenbrand authored
commit f4a551b7 upstream. By missing an "L", we might detect some addresses to be <8k, although they are not. e.g. for itdba = 100001fff !(gpa & ~0x1fffU) -> 1 !(gpa & ~0x1fffUL) -> 0 So we would report a SIE validity intercept although everything is fine. Fixes: 166ecb3d ("KVM: s390: vsie: support transactional execution") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
Janosch Frank <frankja@linux.ibm.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
David Hildenbrand <david@redhat.com> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
commit 0aa48468 upstream. The X86_FEATURE_SSBD is an synthetic CPU feature - that is it bit location has no relevance to the real CPUID 0x7.EBX[31] bit position. For that we need the new CPU feature name. Fixes: 52817587 ("x86/cpufeatures: Disentangle SSBD enumeration") Signed-off-by:
-
zhongjiang authored
commit 4ea77014 upstream. When running kill(72057458746458112, 0) in userspace I hit the following issue. UBSAN: Undefined behaviour in kernel/signal.c:1462:11 negation of -2147483648 cannot be represented in type 'int': CPU: 226 PID: 9849 Comm: test Tainted: G B ---- ------- 3.10.0-327.53.58.70.x86_64_ubsan+ #116 Hardware name: Huawei Technologies Co., Ltd. RH8100 V3/BC61PBIA, BIOS BLHSV028 11/11/2014 Call Trace: dump_stack+0x19/0x1b ubsan_epilogue+0xd/0x50 __ubsan_handle_negate_overflow+0x109/0x14e SYSC_kill+0x43e/0x4d0 SyS_kill+0xe/0x10 system_call_fastpath+0x16/0x1b Add code to avoid the UBSAN detection. [akpm@linux-foundation.org: tweak comment] Link: http://lkml.kernel.org/r/1496670008-59084-1-git-send-email-zhongjiang@huawei.comSigned-off-by:
zhongjiang <zhongjiang@huawei.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 23d6aef7 upstream. `resource' can be controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: kernel/sys.c:1474 __do_compat_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap) kernel/sys.c:1455 __do_sys_old_getrlimit() warn: potential spectre issue 'get_current()->signal->rlim' (local cap) Fix this by sanitizing *resource* before using it to index current->signal->rlim Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Link: http://lkml.kernel.org/r/20180515030038.GA11822@embeddedor.comSigned-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
-
David Hildenbrand authored
commit 3f195972 upstream. Using module_init() is wrong. E.g. ACPI adds and onlines memory before our memory notifier gets registered. This makes sure that ACPI memory detected during boot up will not result in a kernel crash. Easily reproducible with QEMU, just specify a DIMM when starting up. Link: http://lkml.kernel.org/r/20180522100756.18478-3-david@redhat.com Fixes: 786a8959 ("kasan: disable memory hotplug") Signed-off-by:
Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Davidlohr Bueso authored
commit 8f89c007 upstream. shmat()'s SHM_REMAP option forbids passing a nil address for; this is in fact the very first thing we check for. Andrea reported that for SHM_RND|SHM_REMAP cases we can end up bypassing the initial addr check, but we need to check again if the address was rounded down to nil. As of this patch, such cases will return -EINVAL. Link: http://lkml.kernel.org/r/20180503204934.kk63josdu6u53fbd@linux-n805Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Reported-by:
Andrea Arcangeli <aarcange@redhat.com> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Davidlohr Bueso authored
commit a73ab244 upstream. Patch series "ipc/shm: shmat() fixes around nil-page". These patches fix two issues reported[1] a while back by Joe and Andrea around how shmat(2) behaves with nil-page. The first reverts a commit that it was incorrectly thought that mapping nil-page (address=0) was a no no with MAP_FIXED. This is not the case, with the exception of SHM_REMAP; which is address in the second patch. I chose two patches because it is easier to backport and it explicitly reverts bogus behaviour. Both patches ought to be in -stable and ltp testcases need updated (the added testcase around the cve can be modified to just test for SHM_RND|SHM_REMAP). [1] lkml.kernel.org/r/20180430172152.nfa564pvgpk3ut7p@linux-n805 This patch (of 2): Commit 95e91b83 ("ipc/shm: Fix shmat mmap nil-page protection") worked on the idea that we should not be mapping as root addr=0 and MAP_FIXED. However, it was reported that this scenario is in fact valid, thus making the patch both bogus and breaks userspace as well. For example X11's libint10.so relies on shmat(1, SHM_RND) for lowmem initialization[1]. [1] https://cgit.freedesktop.org/xorg/xserver/tree/hw/xfree86/os-support/linux/int10/linux.c#n347 Link: http://lkml.kernel.org/r/20180503203243.15045-2-dave@stgolabs.net Fixes: 95e91b83 ("ipc/shm: Fix shmat mmap nil-page protection") Signed-off-by:
Joe Lawrence <joe.lawrence@redhat.com> Reported-by:
-
Michael J. Ruhl authored
commit f9e76ca3 upstream. A pio send egress error can occur when the PSM library attempts to to send a bad packet. That issue is still being investigated. The pio error interrupt handler then attempts to progress the recovery of the errored pio send context. Code inspection reveals that the handling lacks the necessary locking if that recovery interleaves with a PSM close of the "context" object contains the pio send context. The lack of the locking can cause the recovery to access the already freed pio send context object and incorrectly deduce that the pio send context is actually a kernel pio send context as shown by the NULL deref stack below: [<ffffffff8143d78c>] _dev_info+0x6c/0x90 [<ffffffffc0613230>] sc_restart+0x70/0x1f0 [hfi1] [<ffffffff816ab124>] ? __schedule+0x424/0x9b0 [<ffffffffc06133c5>] sc_halted+0x15/0x20 [hfi1] [<ffffffff810aa3ba>] process_one_work+0x17a/0x440 [<ffffffff810ab086>] worker_thread+0x126/0x3c0 [<ffffffff810aaf60>] ? manage_workers.isra.24+0x2a0/0x2a0 [<ffffffff810b252f>] kthread+0xcf/0xe0 [<ffffffff810b2460>] ? insert_kthread_work+0x40/0x40 [<ffffffff816b8798>] ret_from_fork+0x58/0x90 [<ffffffff810b2460>] ? insert_kthread_work+0x40/0x40 This is the best case scenario and other scenarios can corrupt the already freed memory. Fix by adding the necessary locking in the pio send context error handler. Cc: <stable@vger.kernel.org> # 4.9.x Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Thomas Hellstrom authored
commit 938ae725 upstream. Depending on whether the kernel is compiled with frame-pointer or not, the temporary memory location used for the bp parameter in these macros is referenced relative to the stack pointer or the frame pointer. Hence we can never reference that parameter when we've modified either the stack pointer or the frame pointer, because then the compiler would generate an incorrect stack reference. Fix this by pushing the temporary memory parameter on a known location on the stack before modifying the stack- and frame pointers. Cc: <stable@vger.kernel.org> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Brian Paul <brianp@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
Joe Jin authored
commit 4855c92d upstream. When run raidconfig from Dom0 we found that the Xen DMA heap is reduced, but Dom Heap is increased by the same size. Tracing raidconfig we found that the related ioctl() in megaraid_sas will call dma_alloc_coherent() to apply memory. If the memory allocated by Dom0 is not in the DMA area, it will exchange memory with Xen to meet the requiment. Later drivers call dma_free_coherent() to free the memory, on xen_swiotlb_free_coherent() the check condition (dev_addr + size - 1 <= dma_mask) is always false, it prevents calling xen_destroy_contiguous_region() to return the memory to the Xen DMA heap. This issue introduced by commit 6810df88 "xen-swiotlb: When doing coherent alloc/dealloc check before swizzling the MFNs.". Signed-off-by:
Joe Jin <joe.jin@oracle.com> Tested-by:
John Sobecki <john.sobecki@oracle.com> Reviewed-by:
-
Sudip Mukherjee authored
commit 136d769e upstream. While whitelisting Micron M500DC drives, the tweaked blacklist entry enabled queued TRIM from M500IT variants also. But these do not support queued TRIM. And while using those SSDs with the latest kernel we have seen errors and even the partition table getting corrupted. Some part from the dmesg: [ 6.727384] ata1.00: ATA-9: Micron_M500IT_MTFDDAK060MBD, MU01, max UDMA/133 [ 6.727390] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 6.741026] ata1.00: supports DRM functions and may not be fully accessible [ 6.759887] ata1.00: configured for UDMA/133 [ 6.762256] scsi 0:0:0:0: Direct-Access ATA Micron_M500IT_MT MU01 PQ: 0 ANSI: 5 and then for the error: [ 120.860334] ata1.00: exception Emask 0x1 SAct 0x7ffc0007 SErr 0x0 action 0x6 frozen [ 120.860338] ata1.00: irq_stat 0x40000008 [ 120.860342] ata1.00: failed command: SEND FPDMA QUEUED [ 120.860351] ata1.00: cmd 64/01:00:00:00:00/00:00:00:00:00/a0 tag 0 ncq dma 512 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x5 (timeout) [ 120.860353] ata1.00: status: { DRDY } [ 120.860543] ata1: hard resetting link [ 121.166128] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 121.166376] ata1.00: supports DRM functions and may not be fully accessible [ 121.186238] ata1.00: supports DRM functions and may not be fully accessible [ 121.204445] ata1.00: configured for UDMA/133 [ 121.204454] ata1.00: device reported invalid CHS sector 0 [ 121.204541] sd 0:0:0:0: [sda] tag#18 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [ 121.204546] sd 0:0:0:0: [sda] tag#18 Sense Key : 0x5 [current] [ 121.204550] sd 0:0:0:0: [sda] tag#18 ASC=0x21 ASCQ=0x4 [ 121.204555] sd 0:0:0:0: [sda] tag#18 CDB: opcode=0x93 93 08 00 00 00 00 00 04 28 80 00 00 00 30 00 00 [ 121.204559] print_req_error: I/O error, dev sda, sector 272512 After few reboots with these errors, and the SSD is corrupted. After blacklisting it, the errors are not seen and the SSD does not get corrupted any more. Fixes: 243918be ("libata: Do not blacklist Micron M500DC") Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: stable@vger.kernel.org Signed-off-by:
Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Tejun Heo authored
commit 322579dc upstream. Sandisk SSDs SD7SN6S256G and SD8SN8U256G are regularly locking up regularly under sustained moderate load with NCQ enabled. Blacklist for now. Signed-off-by:
Dave Jones <davej@codemonkey.org.uk> Cc: stable@vger.kernel.org Signed-off-by:
-
Corneliu Doban authored
commit 5f651b87 upstream. When the host controller accepts only 32bit writes, the value of the 16bit TRANSFER_MODE register, that has the same 32bit address as the 16bit COMMAND register, needs to be saved and it will be written in a 32bit write together with the command as this will trigger the host to send the command on the SD interface. When sending the tuning command, TRANSFER_MODE is written and then sdhci_set_transfer_mode reads it back to clear AUTO_CMD12 bit and write it again resulting in wrong value to be written because the initial write value was saved in a shadow and the read-back returned a wrong value, from the register. Fix sdhci_iproc_readw to return the saved value of TRANSFER_MODE when a saved value exist. Same fix for read of BLOCK_SIZE and BLOCK_COUNT registers, that are saved for a different reason, although a scenario that will cause the mentioned problem on this registers is not probable. Fixes: b580c52d ("mmc: sdhci-iproc: add IPROC SDHCI driver") Signed-off-by:
Corneliu Doban <corneliu.doban@broadcom.com> Signed-off-by:
Scott Branden <scott.branden@broadcom.com> Cc: stable@vger.kernel.org # v4.1+ Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Srinath Mannam authored
commit 4c94238f upstream. Remove hard coded mmc cap 1.8v from platform data as it is board specific. The 1.8v DDR mmc caps can be enabled using DTS property for those boards that support it. Fixes: b17b4ab8 ("mmc: sdhci-iproc: define MMC caps in platform data") Signed-off-by:
Srinath Mannam <srinath.mannam@broadcom.com> Signed-off-by:
Ray Jui <ray.jui@broadcom.com> Cc: stable@vger.kernel.org # v4.8+ Signed-off-by:
-
Al Viro authored
commit 1e2e547a upstream. For anything NFS-exported we do _not_ want to unlock new inode before it has grown an alias; original set of fixes got the ordering right, but missed the nasty complication in case of lockdep being enabled - unlock_new_inode() does lockdep_annotate_inode_mutex_key(inode) which can only be done before anyone gets a chance to touch ->i_mutex. Unfortunately, flipping the order and doing unlock_new_inode() before d_instantiate() opens a window when mkdir can race with open-by-fhandle on a guessed fhandle, leading to multiple aliases for a directory inode and all the breakage that follows from that. Correct solution: a new primitive (d_instantiate_new()) combining these two in the right order - lockdep annotate, then d_instantiate(), then the rest of unlock_new_inode(). All combinations of d_instantiate() with unlock_new_inode() should be converted to that. Cc: stable@kernel.org # 2.6.29 and later Tested-by:
Mike Marshall <hubcap@omnibond.com> Reviewed-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Ben Hutchings authored
commit 3ae18097 upstream. Commit f65e0d29 ("ALSA: timer: Call notifier in the same spinlock") combined the start/continue and stop/pause functions, and in doing so changed the event code for the pause case to SNDRV_TIMER_EVENT_CONTINUE. Change it back to SNDRV_TIMER_EVENT_PAUSE. Fixes: f65e0d29 ("ALSA: timer: Call notifier in the same spinlock") Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: stable@vger.kernel.org Signed-off-by:
-
Al Viro authored
commit baf10564 upstream. kill_ioctx() used to have an explicit RCU delay between removing the reference from ->ioctx_table and percpu_ref_kill() dropping the refcount. At some point that delay had been removed, on the theory that percpu_ref_kill() itself contained an RCU delay. Unfortunately, that was the wrong kind of RCU delay and it didn't care about rcu_read_lock() used by lookup_ioctx(). As the result, we could get ctx freed right under lookup_ioctx(). Tejun has fixed that in a6d7cff4 ("fs/aio: Add explicit RCU grace period when freeing kioctx"); however, that fix is not enough. Suppose io_destroy() from one thread races with e.g. io_setup() from another; CPU1 removes the reference from current->mm->ioctx_table[...] just as CPU2 has picked it (under rcu_read_lock()). Then CPU1 proceeds to drop the refcount, getting it to 0 and triggering a call of free_ioctx_users(), which proceeds to drop the secondary refcount and once that reaches zero calls free_ioctx_reqs(). That does INIT_RCU_WORK(&ctx->free_rwork, free_ioctx); queue_rcu_work(system_wq, &ctx->free_rwork); and schedules freeing the whole thing after RCU delay. In the meanwhile CPU2 has gotten around to percpu_ref_get(), bumping the refcount from 0 to 1 and returned the reference to io_setup(). Tejun's fix (that queue_rcu_work() in there) guarantees that ctx won't get freed until after percpu_ref_get(). Sure, we'd increment the counter before ctx can be freed. Now we are out of rcu_read_lock() and there's nothing to stop freeing of the whole thing. Unfortunately, CPU2 assumes that since it has grabbed the reference, ctx is *NOT* going away until it gets around to dropping that reference. The fix is obvious - use percpu_ref_tryget_live() and treat failure as miss. It's not costlier than what we currently do in normal case, it's safe to call since freeing *is* delayed and it closes the race window - either lookup_ioctx() comes before percpu_ref_kill() (in which case ctx->users won't reach 0 until the caller of lookup_ioctx() drops it) or lookup_ioctx() fails, ctx->users is unaffected and caller of lookup_ioctx() doesn't see the object in question at all. Cc: stable@kernel.org Fixes: a6d7cff4 "fs/aio: Add explicit RCU grace period when freeing kioctx" Signed-off-by:
-
Al Viro authored
commit 30da870c upstream. we unlock the directory hash too early - if we are looking at secondary link and primary (in another directory) gets removed just as we unlock, we could have the old primary moved in place of the secondary, leaving us to look into freed entry (and leaving our dentry with ->d_fsdata pointing to a freed entry). Cc: stable@vger.kernel.org # 2.4.4+ Acked-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Colin Ian King authored
commit ba3696e9 upstream. Trivial fix to spelling mistake in debugfs_entries text. Fixes: 669e846e ("KVM/MIPS32: MIPS arch specific APIs for KVM") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kernel-janitors@vger.kernel.org Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by:
James Hogan <jhogan@kernel.org> Signed-off-by:
-
Maciej W. Rozycki authored
commit 9a3a92cc upstream. Check the TIF_32BIT_FPREGS task setting of the tracee rather than the tracer in determining the layout of floating-point general registers in the floating-point context, correcting access to odd-numbered registers for o32 tracees where the setting disagrees between the two processes. Fixes: 597ce172 ("MIPS: Support for 64-bit FP with O32 binaries") Signed-off-by:
Maciej W. Rozycki <macro@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.14+ Signed-off-by:
-
Maciej W. Rozycki authored
commit 71e909c0 upstream. Correct commit 7aeb753b ("MIPS: Implement task_user_regset_view.") and expose the FIR register using the unused 4 bytes at the end of the NT_PRFPREG regset. Without that register included clients cannot use the PTRACE_GETREGSET request to retrieve the complete FPU register set and have to resort to one of the older interfaces, either PTRACE_PEEKUSR or PTRACE_GETFPREGS, to retrieve the missing piece of data. Also the register is irreversibly missing from core dumps. This register is architecturally hardwired and read-only so the write path does not matter. Ignore data supplied on writes then. Fixes: 7aeb753b ("MIPS: Implement task_user_regset_view.") Signed-off-by:
-
NeilBrown authored
commit 55a2aa08 upstream. When DMA will be performed to a MIPS32 1004K CPS, the L1-cache for the range needs to be flushed and invalidated first. The code currently takes one of two approaches. 1/ If the range is less than the size of the dcache, then HIT type requests flush/invalidate cache lines for the particular addresses. HIT-type requests a globalised by the CPS so this is safe on SMP. 2/ If the range is larger than the size of dcache, then INDEX type requests flush/invalidate the whole cache. INDEX type requests affect the local cache only. CPS does not propagate them in any way. So this invalidation is not safe on SMP CPS systems. Data corruption due to '2' can quite easily be demonstrated by repeatedly "echo 3 > /proc/sys/vm/drop_caches" and then sha1sum a file that is several times the size of available memory. Dropping caches means that large contiguous extents (large than dcache) are more likely. This was not a problem before Linux-4.8 because option 2 was never used if CONFIG_MIPS_CPS was defined. The commit which removed that apparently didn't appreciate the full consequence of the change. We could, in theory, globalize the INDEX based flush by sending an IPI to other cores. These cache invalidation routines can be called with interrupts disabled and synchronous IPI require interrupts to be enabled. Asynchronous IPI may not trigger writeback soon enough. So we cannot use IPI in practice. We can already test if IPI would be needed for an INDEX operation with r4k_op_needs_ipi(R4K_INDEX). If this is true then we mustn't try the INDEX approach as we cannot use IPI. If this is false (e.g. when there is only one core and hence one L1 cache) then it is safe to use the INDEX approach without IPI. This patch avoids options 2 if r4k_op_needs_ipi(R4K_INDEX), and so eliminates the corruption. Fixes: c00ab489 ("MIPS: Remove cpu_has_safe_index_cacheops") Signed-off-by:
NeilBrown <neil@brown.name> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paul.burton@mips.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.8+ Patchwork: https://patchwork.linux-mips.org/patch/19259/Signed-off-by:
-
- 25 May, 2018 7 commits
-
-
Greg Kroah-Hartman authored
-
Colin Ian King authored
[ Upstream commit 347876ad ] The shifting of buf[5] by 24 bits to the left will be promoted to a 32 bit signed int and then sign-extended to an unsigned long. If the top bit of buf[5] is set then all then all the upper bits sec end up as also being set because of the sign-extension. Fix this by casting buf[5] to an unsigned long before the shift. Detected by CoverityScan, CID#1465292 ("Unintended sign extension") Fixes: 0e149233 ("rtc: add rtc-tx4939 driver") Signed-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Alexandre Belloni authored
[ Upstream commit b3a5ac42 ] On 32bit platforms, time_t is still a signed 32bit long. If it is overflowed, userspace and the kernel cant agree on the current system time. This causes multiple issues, in particular with systemd: https://github.com/systemd/systemd/issues/1143 A good workaround is to simply avoid using hctosys which is something I greatly encourage as the time is better set by userspace. However, many distribution enable it and use systemd which is rendering the system unusable in case the RTC holds a date after 2038 (and more so after 2106). Many drivers have workaround for this case and they should be eliminated so there is only one place left to fix when userspace is able to cope with dates after the 31bit overflow. Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Bryan O'Donoghue authored
[ Upstream commit 1485991c ] commit 179a502f ("rtc: snvs: add Freescale rtc-snvs driver") introduces the SNVS RTC driver with a function snvs_rtc_enable(). snvs_rtc_enable() can return an error on the enable path however this driver does not currently trap that failure on the probe() path and consequently if enabling the RTC fails we encounter a later error spinning forever in rtc_write_sync_lp(). [ 36.093481] [<c010d630>] (__irq_svc) from [<c0c2e9ec>] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 36.102122] [<c0c2e9ec>] (_raw_spin_unlock_irqrestore) from [<c072e32c>] (regmap_read+0x4c/0x5c) [ 36.110938] [<c072e32c>] (regmap_read) from [<c085d0f4>] (rtc_write_sync_lp+0x6c/0x98) [ 36.118881] [<c085d0f4>] (rtc_write_sync_lp) from [<c085d160>] (snvs_rtc_alarm_irq_enable+0x40/0x4c) [ 36.128041] [<c085d160>] (snvs_rtc_alarm_irq_enable) from [<c08567b4>] (rtc_timer_do_work+0xd8/0x1a8) [ 36.137291] [<c08567b4>] (rtc_timer_do_work) from [<c01441b8>] (process_one_work+0x28c/0x76c) [ 36.145840] [<c01441b8>] (process_one_work) from [<c01446cc>] (worker_thread+0x34/0x58c) [ 36.153961] [<c01446cc>] (worker_thread) from [<c014aee4>] (kthread+0x138/0x150) [ 36.161388] [<c014aee4>] (kthread) from [<c0107e14>] (ret_from_fork+0x14/0x20) [ 36.168635] rcu_sched kthread starved for 2602 jiffies! g496 c495 f0x2 RCU_GP_WAIT_FQS(3) ->state=0x0 ->cpu=0 [ 36.178564] rcu_sched R running task 0 8 2 0x00000000 [ 36.185664] [<c0c288b0>] (__schedule) from [<c0c29134>] (schedule+0x3c/0xa0) [ 36.192739] [<c0c29134>] (schedule) from [<c0c2db80>] (schedule_timeout+0x78/0x4e0) [ 36.200422] [<c0c2db80>] (schedule_timeout) from [<c01a7ab0>] (rcu_gp_kthread+0x648/0x1864) [ 36.208800] [<c01a7ab0>] (rcu_gp_kthread) from [<c014aee4>] (kthread+0x138/0x150) [ 36.216309] [<c014aee4>] (kthread) from [<c0107e14>] (ret_from_fork+0x14/0x20) This patch fixes by parsing the result of rtc_write_sync_lp() and propagating both in the probe and elsewhere. If the RTC doesn't start we don't proceed loading the driver and don't get into this loop mess later on. Fixes: 179a502f ("rtc: snvs: add Freescale rtc-snvs driver") Signed-off-by:
Bryan O'Donoghue <pure.logic@nexus-software.ie> Acked-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Vignesh R authored
[ Upstream commit 2e9fe539 ] Currently, data in RX FIFO is read based on UART_LSR register state even if RDI and RLSI interrupts are disabled in UART_IER register. This is because when IRQ handler is called due to TX FIFO empty event, RX FIFO is serviced based on UART_LSR register status instead of UART_IIR status. This defeats the purpose of disabling UART RX FIFO interrupts during throttling(see, omap_8250_throttle()) as IRQ handler continues to drain UART RX FIFO resulting in overflow of buffer at tty layer. Fix this by making sure that driver drains UART RX FIFO only when UART_IIR_RDI is set along with UART_LSR_BI or UART_LSR_DR bits. Signed-off-by:
Vignesh R <vigneshr@ti.com> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit f9f57869 ] The arc_uart_ports[] array is indexed using a value derived from the "serialN" alias in DT, which may lead to an out-of-bounds access. Fix this by adding a range check. Note that the array size is defined by a Kconfig symbol (CONFIG_SERIAL_ARC_NR_PORTS), so this can even be triggered using a legitimate DTB. Fixes: ea28fd56 ("serial/arc-uart: switch to devicetree based probing") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Geert Uytterhoeven authored
[ Upstream commit ffab87fd ] The lpuart_ports[] array is indexed using a value derived from the "serialN" alias in DT, which may lead to an out-of-bounds access. Fix this by adding a range check. Fixes: c9e2e946 ("tty: serial: add Freescale lpuart driver support") Signed-off-by:
-
