Pull x86 build cleanup from Thomas Gleixner:
 "Remove a stale quirk for a no longer supported GCC version"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/build: Remove old -funit-at-a-time GCC quirk

Pull x86 asm updates from Thomas Gleixner:
 "The lowlevel and ASM code updates for x86:

   - Make stack trace unwinding more reliable

   - ASM instruction updates for better code generation

   - Various cleanups"

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/entry/64: Add two more instruction suffixes
  x86/asm/64: Use 32-bit XOR to zero registers
  x86/build/vdso: Simplify 'cmd_vdso2c'
  x86/build/vdso: Remove unused vdso-syms.lds
  x86/stacktrace: Enable HAVE_RELIABLE_STACKTRACE for the ORC unwinder
  x86/unwind/orc: Detect the end of the stack
  x86/stacktrace: Do not fail for ORC with regs on stack
  x86/stacktrace: Clarify the reliable success paths
  x86/stacktrace: Remove STACKTRACE_DUMP_ONCE
  x86/stacktrace: Do not unwind after user regs
  x86/asm: Use CC_SET/CC_OUT in percpu_cmpxchg8b_double() to micro-optimize code generation

Pull x86 boot updates from Thomas Gleixner:
 "Boot code updates for x86:

   - Allow to skip a given amount of huge pages for address layout
     randomization on the kernel command line to prevent regressions in
     the huge page allocation with small memory sizes

   - Various cleanups"

* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Use CC_SET()/CC_OUT() instead of open coding it
  x86/boot/KASLR: Make local variable mem_limit static
  x86/boot/KASLR: Skip specified number of 1GB huge pages when doing physical randomization (KASLR)
  x86/boot/KASLR: Add two new functions for 1GB huge pages handling

Pull x86 apic update from Thomas Gleixner:
 "Trivial cleanups of the APIC related code"

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Trivial coding style fixes
  x86/vector: Merge allocate_vector() into assign_vector_locked()

Pull timer updates from Thomas Gleixner:
 "The timers departement more or less proudly presents:

   - More Y2038 timekeeping work mostly in the core code. The work is
     slowly, but steadily targeting the actuall syscalls.

   - Enhanced timekeeping suspend/resume support by utilizing
     clocksources which do not stop during suspend, but are otherwise
     not the main timekeeping clocksources.

   - Make NTP adjustmets more accurate and immediate when the frequency
     is set directly and not incrementally.

   - Sanitize the overrung handing of posix timers

   - A new timer driver for Mediatek SoCs

   - The usual pile of fixes and updates all over the place"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
  clockevents: Warn if cpu_all_mask is used as cpumask
  tick/broadcast-hrtimer: Use cpu_possible_mask for ce_broadcast_hrtimer
  clocksource/drivers/arm_arch_timer: Fix bogus cpu_all_mask usage
  clocksource: ti-32k: Remove CLOCK_SOURCE_SUSPEND_NONSTOP flag
  timers: Clear timer_base::must_forward_clk with timer_base::lock held
  clocksource/drivers/sprd: Register one always-on timer to compensate suspend time
  clocksource/drivers/timer-mediatek: Add support for system timer
  clocksource/drivers/timer-mediatek: Convert the driver to timer-of
  clocksource/drivers/timer-mediatek: Use specific prefix for GPT
  clocksource/drivers/timer-mediatek: Rename mtk_timer to timer-mediatek
  clocksource/drivers/timer-mediatek: Add system timer bindings
  clocksource/drivers: Set clockevent device cpumask to cpu_possible_mask
  time: Introduce one suspend clocksource to compensate the suspend time
  time: Fix extra sleeptime injection when suspend fails
  timekeeping/ntp: Constify some function arguments
  ntp: Use kstrtos64 for s64 variable
  ntp: Remove redundant arguments
  timer: Fix coding style
  ktime: Provide typesafe ktime_to_ns()
  hrtimer: Improve kernel message printing
  ...

Pull perf update from Thomas Gleixner:
 "The perf crowd presents:

  Kernel updates:

   - Removal of jprobes

   - Cleanup and consolidatation the handling of kprobes

   - Cleanup and consolidation of hardware breakpoints

   - The usual pile of fixes and updates to PMUs and event descriptors

  Tooling updates:

   - Updates and improvements all over the place. Nothing outstanding,
     just the (good) boring incremental grump work"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
  perf trace: Do not require --no-syscalls to suppress strace like output
  perf bpf: Include uapi/linux/bpf.h from the 'perf trace' script's bpf.h
  perf tools: Allow overriding MAX_NR_CPUS at compile time
  perf bpf: Show better message when failing to load an object
  perf list: Unify metric group description format with PMU event description
  perf vendor events arm64: Update ThunderX2 implementation defined pmu core events
  perf cs-etm: Generate branch sample for CS_ETM_TRACE_ON packet
  perf cs-etm: Generate branch sample when receiving a CS_ETM_TRACE_ON packet
  perf cs-etm: Support dummy address value for CS_ETM_TRACE_ON packet
  perf cs-etm: Fix start tracing packet handling
  perf build: Fix installation directory for eBPF
  perf c2c report: Fix crash for empty browser
  perf tests: Fix indexing when invoking subtests
  perf trace: Beautify the AF_INET & AF_INET6 'socket' syscall 'protocol' args
  perf trace beauty: Add beautifiers for 'socket''s 'protocol' arg
  perf trace beauty: Do not print NULL strarray entries
  perf beauty: Add a generator for IPPROTO_ socket's protocol constants
  tools include uapi: Grab a copy of linux/in.h
  perf tests: Fix complex event name parsing
  perf evlist: Fix error out while applying initial delay and LBR
  ...

Pull locking/atomics update from Thomas Gleixner:
 "The locking, atomics and memory model brains delivered:

   - A larger update to the atomics code which reworks the ordering
     barriers, consolidates the atomic primitives, provides the new
     atomic64_fetch_add_unless() primitive and cleans up the include
     hell.

   - Simplify cmpxchg() instrumentation and add instrumentation for
     xchg() and cmpxchg_double().

   - Updates to the memory model and documentation"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (48 commits)
  locking/atomics: Rework ordering barriers
  locking/atomics: Instrument cmpxchg_double*()
  locking/atomics: Instrument xchg()
  locking/atomics: Simplify cmpxchg() instrumentation
  locking/atomics/x86: Reduce arch_cmpxchg64*() instrumentation
  tools/memory-model: Rename litmus tests to comply to norm7
  tools/memory-model/Documentation: Fix typo, smb->smp
  sched/Documentation: Update wake_up() & co. memory-barrier guarantees
  locking/spinlock, sched/core: Clarify requirements for smp_mb__after_spinlock()
  sched/core: Use smp_mb() in wake_woken_function()
  tools/memory-model: Add informal LKMM documentation to MAINTAINERS
  locking/atomics/Documentation: Describe atomic_set() as a write operation
  tools/memory-model: Make scripts executable
  tools/memory-model: Remove ACCESS_ONCE() from model
  tools/memory-model: Remove ACCESS_ONCE() from recipes
  locking/memory-barriers.txt/kokr: Update Korean translation to fix broken DMA vs. MMIO ordering example
  MAINTAINERS: Add Daniel Lustig as an LKMM reviewer
  tools/memory-model: Fix ISA2+pooncelock+pooncelock+pombonce name
  tools/memory-model: Add litmus test for full multicopy atomicity
  locking/refcount: Always allow checked forms
  ...

Pull CPU hotplug update from Thomas Gleixner:
 "A trivial name fix for the hotplug state machine"

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Clarify CPU hotplug step name for timers

Pull scheduler updates from Thomas Gleixner:

 - Cleanup and improvement of NUMA balancing

 - Refactoring and improvements to the PELT (Per Entity Load Tracking)
   code

 - Watchdog simplification and related cleanups

 - The usual pile of small incremental fixes and improvements

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
  watchdog: Reduce message verbosity
  stop_machine: Reflow cpu_stop_queue_two_works()
  sched/numa: Move task_numa_placement() closer to numa_migrate_preferred()
  sched/numa: Use group_weights to identify if migration degrades locality
  sched/numa: Update the scan period without holding the numa_group lock
  sched/numa: Remove numa_has_capacity()
  sched/numa: Modify migrate_swap() to accept additional parameters
  sched/numa: Remove unused task_capacity from 'struct numa_stats'
  sched/numa: Skip nodes that are at 'hoplimit'
  sched/debug: Reverse the order of printing faults
  sched/numa: Use task faults only if numa_group is not yet set up
  sched/numa: Set preferred_node based on best_cpu
  sched/numa: Simplify load_too_imbalanced()
  sched/numa: Evaluate move once per node
  sched/numa: Remove redundant field
  sched/debug: Show the sum wait time of a task group
  sched/fair: Remove #ifdefs from scale_rt_capacity()
  sched/core: Remove get_cpu() from sched_fork()
  sched/cpufreq: Clarify sugov_get_util()
  sched/sysctl: Remove unused sched_time_avg_ms sysctl
  ...

Pull scheduler fix from Thomas Gleixner:
 "A single bugfix to prevent a pinned thread which queues stomp machine
  work to be preempted by the stopper thread on its CPU which causes a
  live lock as it is unable to wake the second CPUs stopper thread"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  stop_machine: Atomically queue and wake stopper threads

Pull x86 RAS updates from Thomas Gleixner:
 "A small set of changes to the RAS core:

   - Rework of the MCE bank scanning code

   - Y2038 converion"

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Cleanup __mc_scan_banks()
  x86/mce: Carve out bank scanning code
  x86/mce: Remove !banks check
  x86/mce: Carve out the crashing_cpu check
  x86/mce: Always use 64-bit timestamps

Pull RCU updates from Thomas Gleixner:
 "A large update to RCU:

  Preparatory work for consolidating the RCU flavors:

   - Introduce grace-period sequence numbers to the RCU-bh, RCU-preempt,
     and RCU-sched flavors, replacing the old ->gpnum and ->completed
     pair of fields.

     This change allows lockless code to obtain the complete
     grace-period state with a single READ_ONCE(), which is needed to
     maintain tolerable lock contention during the upcoming
     consolidation of the three RCU flavors.

     Note that grace-period sequence numbers are already used by
     rcu_barrier(), expedited RCU grace periods, and SRCU, and are thus
     already heavily used and well-tested. Joel Fernandes contributed a
     number of excellent fixes and improvements.

   - Clean up some grace-period-reporting loose ends, including
     improving the handling of quiescent states from offline CPUs and
     fixing some false-positive WARN_ON_ONCE() invocations.

     (Strictly speaking, the WARN_ON_ONCE() invocations were quite
     correct, but their invariants were (harmlessly) violated by the
     earlier sloppy handling of quiescent states from offline CPUs.)

     In addition, improve grace-period forward-progress guarantees so as
     to allow removal of fail-safe checks that required otherwise
     needless lock acquisitions. Finally, add more diagnostics to help
     debug the upcoming consolidation of the RCU-bh, RCU-preempt, and
     RCU-sched flavors.

  The rest:

   - SRCU updates

   - Updates to rcutorture and associated scripting.

   - The usual pile of miscellaneous fixes"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (118 commits)
  rcutorture: Fix rcu_barrier successes counter
  rcutorture: Add support to detect if boost kthread prio is too low
  rcutorture: Use monotonic timestamp for stall detection
  rcutorture: Make boost test more robust
  rcutorture: Disable RT throttling for boost tests
  rcutorture: Emphasize testing of single reader protection type
  rcutorture: Handle extended read-side critical sections
  rcutorture: Make rcu_torture_timer() use rcu_torture_one_read()
  rcutorture: Use per-CPU random state for rcu_torture_timer()
  rcutorture: Use atomic increment for n_rcu_torture_timers
  rcutorture: Extract common code from rcu_torture_reader()
  rcuperf: Remove unused torturing_tasks() function
  rcu: Remove rcutorture test version and sequence number
  rcutorture: Change units of onoff_interval to jiffies
  rcu: Assign higher prio to RCU threads if rcutorture is built-in
  rculist: Improve documentation for list_for_each_entry_from_rcu()
  srcu: Add grace-period number to rcutorture statistics printout
  rcu: Print stall-warning NMI dyntick state in hexadecimal
  MAINTAINERS: Update RCU, SRCU, and TORTURE-TEST entries
  rcu: Make rcu_seq_diff() more exact
  ...

Pull genirq updates from Thomas Gleixner:
 "The irq departement provides:

   - A synchronization fix for free_irq() to synchronize just the
     removed interrupt thread on shared interrupt lines.

   - Consolidate the multi low level interrupt entry handling and mvoe
     it to the generic code instead of adding yet another copy for
     RISC-V

   - Refactoring of the ARM LPI allocator and LPI exposure to the
     hypervisor

   - Yet another interrupt chip driver for the JZ4725B SoC

   - Speed up for /proc/interrupts as people seem to love reading this
     file with high frequency

   - Miscellaneous fixes and updates"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  irqchip/gic-v3-its: Make its_lock a raw_spin_lock_t
  genirq/irqchip: Remove MULTI_IRQ_HANDLER as it's now obselete
  openrisc: Use the new GENERIC_IRQ_MULTI_HANDLER
  arm64: Use the new GENERIC_IRQ_MULTI_HANDLER
  ARM: Convert to GENERIC_IRQ_MULTI_HANDLER
  irqchip: Port the ARM IRQ drivers to GENERIC_IRQ_MULTI_HANDLER
  irqchip/gic-v3-its: Reduce minimum LPI allocation to 1 for PCI devices
  dt-bindings: irqchip: renesas-irqc: Document r8a77980 support
  dt-bindings: irqchip: renesas-irqc: Document r8a77470 support
  irqchip/ingenic: Add support for the JZ4725B SoC
  irqchip/stm32: Add exti0 translation for stm32mp1
  genirq: Remove redundant NULL pointer check in __free_irq()
  irqchip/gic-v3-its: Honor hypervisor enforced LPI range
  irqchip/gic-v3: Expose GICD_TYPER in the rdist structure
  irqchip/gic-v3-its: Drop chunk allocation compatibility
  irqchip/gic-v3-its: Move minimum LPI requirements to individual busses
  irqchip/gic-v3-its: Use full range of LPIs
  irqchip/gic-v3-its: Refactor LPI allocator
  genirq: Synchronize only with single thread on free_irq()
  genirq: Update code comments wrt recycled thread_mask
  ...

Pull EFI updates from Thomas Gleixner:
 "The EFI pile:

   - Make mixed mode UEFI runtime service invocations mutually
     exclusive, as mandated by the UEFI spec

   - Perform UEFI runtime services calls from a work queue so the calls
     into the firmware occur from a kernel thread

   - Honor the UEFI memory map attributes for live memory regions
     configured by UEFI as a framebuffer. This works around a coherency
     problem with KVM guests running on ARM.

   - Cleanups, improvements and fixes all over the place"

* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efivars: Call guid_parse() against guid_t type of variable
  efi/cper: Use consistent types for UUIDs
  efi/x86: Replace references to efi_early->is64 with efi_is_64bit()
  efi: Deduplicate efi_open_volume()
  efi/x86: Add missing NULL initialization in UGA draw protocol discovery
  efi/x86: Merge 32-bit and 64-bit UGA draw protocol setup routines
  efi/x86: Align efi_uga_draw_protocol typedef names to convention
  efi/x86: Merge the setup_efi_pci32() and setup_efi_pci64() routines
  efi/x86: Prevent reentrant firmware calls in mixed mode
  efi/esrt: Only call efi_mem_reserve() for boot services memory
  fbdev/efifb: Honour UEFI memory map attributes when mapping the FB
  efi: Drop type and attribute checks in efi_mem_desc_lookup()
  efi/libstub/arm: Add opt-in Kconfig option for the DTB loader
  efi: Remove the declaration of efi_late_init() as the function is unused
  efi/cper: Avoid using get_seconds()
  efi: Use a work queue to invoke EFI Runtime Services
  efi/x86: Use non-blocking SetVariable() for efi_delete_dummy_variable()
  efi/x86: Clean up the eboot code

Pull debugobjects update from Thomas Gleixner:
 "Two simple updates for the debug objects code:

   - Make the stack check warning more informative by adding the object
     and the stack page address to the printout

   - Remove a redundant NULL pointer check"

* 'core-debugobjects-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  debugobjects: Remove redundant NULL pointer check
  debugobjects: Make stack check warning more informative

Pull m68k updates from Geert Uytterhoeven:

 - Enable mac_scsi PDMA on PowerBook 500

 - Generic dma_noncoherent_ops conversion

 - Time handling improvements

 - I/O accessor improvements

 - Conversion to MEMBLOCK and NO_BOOTMEM, to bring m68k in line with
   other mainstream architectures

 - Miscellaneous fixes and cleanups

 - Defconfig updates

* tag 'm68k-for-v4.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k/defconfig: Update defconfigs for v4.18-rc6
  m68k: switch to MEMBLOCK + NO_BOOTMEM
  m68k/page_no.h: force __va argument to be unsigned long
  m68k/bitops: convert __ffs to match generic declaration
  m68k/io: Switch mmu variant to <asm-generic/io.h>
  m68k/io: Move mem*io define guards to <asm/kmap.h>
  Input: hilkbd - Add casts to HP9000/300 I/O accessors
  net: mac8390: Use standard memcpy_{from,to}io()
  m68k/io: Add missing ioremap define guards, fix typo
  m68k: Remove unused set_clock_mmss() helpers
  m68k: mac: Use time64_t in RTC handling
  m68k: Use generic dma_noncoherent_ops
  nubus: Set default dma mask for nubus_board devices
  m68k/mac: Enable PDMA for PowerBook 500 series

Pull SCSI fixes from James Bottomley:
 "Eight fixes.

  The most important one is the mpt3sas fix which makes the driver work
  again on big endian systems. The rest are mostly minor error path or
  checker issues and the vmw_scsi one fixes a performance problem"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: vmw_pvscsi: Return DID_RESET for status SAM_STAT_COMMAND_TERMINATED
  scsi: sr: Avoid that opening a CD-ROM hangs with runtime power management enabled
  scsi: mpt3sas: Swap I/O memory read value back to cpu endianness
  scsi: fcoe: clear FC_RP_STARTED flags when receiving a LOGO
  scsi: fcoe: drop frames in ELS LOGO error path
  scsi: fcoe: fix use-after-free in fcoe_ctlr_els_send
  scsi: qedi: Fix a potential buffer overflow
  scsi: qla2xxx: Fix memory leak for allocating abort IOCB

This is purely a preparatory patch for upcoming changes during the 4.19
merge window.

We have a function called "boot_cpu_state_init()" that isn't really
about the bootup cpu state: that is done much earlier by the similarly
named "boot_cpu_init()" (note lack of "state" in name).

This function initializes some hotplug CPU state, and needs to run after
the percpu data has been properly initialized.  It even has a comment to
that effect.

Except it _doesn't_ actually run after the percpu data has been properly
initialized.  On x86 it happens to do that, but on at least arm and
arm64, the percpu base pointers are initialized by the arch-specific
'smp_prepare_boot_cpu()' hook, which ran _after_ boot_cpu_state_init().

This had some unexpected results, and in particular we have a patch
pending for the merge window that did the obvious cleanup of using
'this_cpu_write()' in the cpu hotplug init code:

  -       per_cpu_ptr(&cpuhp_state, smp_processor_id())->state = CPUHP_ONLINE;
  +       this_cpu_write(cpuhp_state.state, CPUHP_ONLINE);

which is obviously the right thing to do.  Except because of the
ordering issue, it actually failed miserably and unexpectedly on arm64.

So this just fixes the ordering, and changes the name of the function to
be 'boot_cpu_hotplug_init()' to make it obvious that it's about cpu
hotplug state, because the core CPU state was supposed to have already
been done earlier.

Marked for stable, since the (not yet merged) patch that will show this
problem is marked for stable.
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Mian Yousaf Kaukab <yousaf.kaukab@suse.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull vfs fixes from Al Viro:
 "A bunch of race fixes, mostly around lazy pathwalk.

  All of it is -stable fodder, a large part going back to 2013"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  make sure that __dentry_kill() always invalidates d_seq, unhashed or not
  fix __legitimize_mnt()/mntput() race
  fix mntput/mntput race
  root dentries need RCU-delayed freeing

Pull networking fixes from David Miller:
 "Last bit of straggler fixes...

  1) Fix btf library licensing to LGPL, from Martin KaFai lau.

  2) Fix error handling in bpf sockmap code, from Daniel Borkmann.

  3) XDP cpumap teardown handling wrt. execution contexts, from Jesper
     Dangaard Brouer.

  4) Fix loss of runtime PM on failed vlan add/del, from Ivan
     Khoronzhuk.

  5) xen-netfront caches skb_shinfo(skb) across a __pskb_pull_tail()
     call, which potentially changes the skb's data buffer, and thus
     skb_shinfo(). Fix from Juergen Gross"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  xen/netfront: don't cache skb_shinfo()
  net: ethernet: ti: cpsw: fix runtime_pm while add/kill vlan
  net: ethernet: ti: cpsw: clear all entries when delete vid
  xdp: fix bug in devmap teardown code path
  samples/bpf: xdp_redirect_cpu adjustment to reproduce teardown race easier
  xdp: fix bug in cpumap teardown code path
  bpf, sockmap: fix cork timeout for select due to epipe
  bpf, sockmap: fix leak in bpf_tcp_sendmsg wait for mem path
  bpf, sockmap: fix bpf_tcp_sendmsg sock error handling
  bpf: btf: Change tools/lib/bpf/btf to LGPL

skb_shinfo() can change when calling __pskb_pull_tail(): Don't cache
its return value.

Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Grygorii Strashko says:

====================
net: ethernet: ti: cpsw: fix runtime pm while add/del reserved vid

Here 2 not critical fixes for:
- vlan ale table leak while error if deleting vlan (simplifies next fix)
- runtime pm while try to set reserved vlan
====================
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It's exclusive with normal behaviour but if try to set vlan to one of
the reserved values is made, the cpsw runtime pm is broken.

Fixes: a6c5d14f ("drivers: net: cpsw: ndev: fix accessing to suspended device")
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

In cases if some of the entries were not found in forwarding table
while killing vlan, the rest not needed entries still left in the
table. No need to stop, as entry was deleted anyway. So fix this by
returning error only after all was cleaned. To implement this, return
-ENOENT in cpsw_ale_del_mcast() as it's supposed to be.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If zram supports writeback feature, it's no longer a
BD_CAP_SYNCHRONOUS_IO device beause zram does asynchronous IO operations
for incompressible pages.

Do not pretend to be synchronous IO device.  It makes the system very
sluggish due to waiting for IO completion from upper layers.

Furthermore, it causes a user-after-free problem because swap thinks the
opearion is done when the IO functions returns so it can free the page
(e.g., lock_page_or_retry and goto out_release in do_swap_page) but in
fact, IO is asynchronous so the driver could access a just freed page
afterward.

This patch fixes the problem.

  BUG: Bad page state in process qemu-system-x86  pfn:3dfab21
  page:ffffdfb137eac840 count:0 mapcount:0 mapping:0000000000000000 index:0x1
  flags: 0x17fffc000000008(uptodate)
  raw: 017fffc000000008 dead000000000100 dead000000000200 0000000000000000
  raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000
  page dumped because: PAGE_FLAGS_CHECK_AT_PREP flag set
  bad because of flags: 0x8(uptodate)
  CPU: 4 PID: 1039 Comm: qemu-system-x86 Tainted: G    B 4.18.0-rc5+ #1
  Hardware name: Supermicro Super Server/X10SRL-F, BIOS 2.0b 05/02/2017
  Call Trace:
    dump_stack+0x5c/0x7b
    bad_page+0xba/0x120
    get_page_from_freelist+0x1016/0x1250
    __alloc_pages_nodemask+0xfa/0x250
    alloc_pages_vma+0x7c/0x1c0
    do_swap_page+0x347/0x920
    __handle_mm_fault+0x7b4/0x1110
    handle_mm_fault+0xfc/0x1f0
    __get_user_pages+0x12f/0x690
    get_user_pages_unlocked+0x148/0x1f0
    __gfn_to_pfn_memslot+0xff/0x3c0 [kvm]
    try_async_pf+0x87/0x230 [kvm]
    tdp_page_fault+0x132/0x290 [kvm]
    kvm_mmu_page_fault+0x74/0x570 [kvm]
    kvm_arch_vcpu_ioctl_run+0x9b3/0x1990 [kvm]
    kvm_vcpu_ioctl+0x388/0x5d0 [kvm]
    do_vfs_ioctl+0xa2/0x630
    ksys_ioctl+0x70/0x80
    __x64_sys_ioctl+0x16/0x20
    do_syscall_64+0x55/0x100
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

Link: https://lore.kernel.org/lkml/0516ae2d-b0fd-92c5-aa92-112ba7bd32fc@contabo.de/
Link: http://lkml.kernel.org/r/20180802051112.86174-1-minchan@kernel.org
[minchan@kernel.org: fix changelog, add comment]
 Link: https://lore.kernel.org/lkml/0516ae2d-b0fd-92c5-aa92-112ba7bd32fc@contabo.de/
 Link: http://lkml.kernel.org/r/20180802051112.86174-1-minchan@kernel.org
 Link: http://lkml.kernel.org/r/20180805233722.217347-1-minchan@kernel.org
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reported-by: Tino Lehnig <tino.lehnig@contabo.de>
Tested-by: Tino Lehnig <tino.lehnig@contabo.de>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>	[4.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ioremap_prot() can return NULL which could lead to an oops.

Link: http://lkml.kernel.org/r/1533195441-58594-1-git-send-email-chenjie6@huawei.comSigned-off-by: chen jie <chenjie6@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: chenjie <chenjie6@huawei.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

With gcc-8 fsanitize=null become very noisy.  GCC started to complain
about things like &a->b, where 'a' is NULL pointer.  There is no NULL
dereference, we just calculate address to struct member.  It's
technically undefined behavior so UBSAN is correct to report it.  But as
long as there is no real NULL-dereference, I think, we should be fine.

-fno-delete-null-pointer-checks compiler flag should protect us from any
consequences.  So let's just no use -fsanitize=null as it's not useful
for us.  If there is a real NULL-deref we will see crash.  Even if
userspace mapped something at NULL (root can do this), with things like
SMAP should catch the issue.

Link: http://lkml.kernel.org/r/20180802153209.813-1-aryabinin@virtuozzo.comSigned-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This entry was created with my personal e-mail address.  Update this entry
to my open-source kernel.org account.

Link: http://lkml.kernel.org/r/20180806143904.4716-4-kieran.bingham@ideasonboard.comSigned-off-by: Kieran Bingham <kbingham@kernel.org>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull i2c fix from Wolfram Sang:
 "A single driver bugfix for I2C.

  The bug was found by systematically stress testing the driver, so I am
  confident to merge it that late in the cycle although it is probably
  unusually large"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: xlp9xx: Fix case where SSIF read transaction completes early

Daniel Borkmann says:

====================
pull-request: bpf 2018-08-10

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix cpumap and devmap on teardown as they're under RCU context
   and won't have same assumption as running under NAPI protection,
   from Jesper.

2) Fix various sockmap bugs in bpf_tcp_sendmsg() code, e.g. we had
   a bug where socket error was not propagated correctly, from Daniel.

3) Fix incompatible libbpf header license for BTF code and match it
   before it gets officially released with the rest of libbpf which
   is LGPL-2.1, from Martin.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

RCU pathwalk relies upon the assumption that anything that changes
->d_inode of a dentry will invalidate its ->d_seq.  That's almost
true - the one exception is that the final dput() of already unhashed
dentry does *not* touch ->d_seq at all.  Unhashing does, though,
so for anything we'd found by RCU dcache lookup we are fine.
Unfortunately, we can *start* with an unhashed dentry or jump into
it.

We could try and be careful in the (few) places where that could
happen.  Or we could just make the final dput() invalidate the damn
thing, unhashed or not.  The latter is much simpler and easier to
backport, so let's do it that way.
Reported-by: "Dae R. Jeong" <threeearcat@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

__legitimize_mnt() has two problems - one is that in case of success
the check of mount_lock is not ordered wrt preceding increment of
refcount, making it possible to have successful __legitimize_mnt()
on one CPU just before the otherwise final mntpu() on another,
with __legitimize_mnt() not seeing mntput() taking the lock and
mntput() not seeing the increment done by __legitimize_mnt().
Solved by a pair of barriers.

Another is that failure of __legitimize_mnt() on the second
read_seqretry() leaves us with reference that'll need to be
dropped by caller; however, if that races with final mntput()
we can end up with caller dropping rcu_read_lock() and doing
mntput() to release that reference - with the first mntput()
having freed the damn thing just as rcu_read_lock() had been
dropped.  Solution: in "do mntput() yourself" failure case
grab mount_lock, check if MNT_DOOMED has been set by racing
final mntput() that has missed our increment and if it has -
undo the increment and treat that as "failure, caller doesn't
need to drop anything" case.

It's not easy to hit - the final mntput() has to come right
after the first read_seqretry() in __legitimize_mnt() *and*
manage to miss the increment done by __legitimize_mnt() before
the second read_seqretry() in there.  The things that are almost
impossible to hit on bare hardware are not impossible on SMP
KVM, though...
Reported-by: Oleg Nesterov <oleg@redhat.com>
Fixes: 48a066e7 ("RCU'd vsfmounts")
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

mntput_no_expire() does the calculation of total refcount under mount_lock;
unfortunately, the decrement (as well as all increments) are done outside
of it, leading to false positives in the "are we dropping the last reference"
test.  Consider the following situation:
	* mnt is a lazy-umounted mount, kept alive by two opened files.  One
of those files gets closed.  Total refcount of mnt is 2.  On CPU 42
mntput(mnt) (called from __fput()) drops one reference, decrementing component
	* After it has looked at component #0, the process on CPU 0 does
mntget(), incrementing component #0, gets preempted and gets to run again -
on CPU 69.  There it does mntput(), which drops the reference (component #69)
and proceeds to spin on mount_lock.
	* On CPU 42 our first mntput() finishes counting.  It observes the
decrement of component #69, but not the increment of component #0.  As the
result, the total it gets is not 1 as it should've been - it's 0.  At which
point we decide that vfsmount needs to be killed and proceed to free it and
shut the filesystem down.  However, there's still another opened file
on that filesystem, with reference to (now freed) vfsmount, etc. and we are
screwed.

It's not a wide race, but it can be reproduced with artificial slowdown of
the mnt_get_count() loop, and it should be easier to hit on SMP KVM setups.

Fix consists of moving the refcount decrement under mount_lock; the tricky
part is that we want (and can) keep the fast case (i.e. mount that still
has non-NULL ->mnt_ns) entirely out of mount_lock.  All places that zero
mnt->mnt_ns are dropping some reference to mnt and they call synchronize_rcu()
before that mntput().  IOW, if mntput() observes (under rcu_read_lock())
a non-NULL ->mnt_ns, it is guaranteed that there is another reference yet to
be dropped.
Reported-by: Jann Horn <jannh@google.com>
Tested-by: Jann Horn <jannh@google.com>
Fixes: 48a066e7 ("RCU'd vsfmounts")
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Jesper Dangaard Brouer says:

====================
Removing entries from cpumap and devmap, goes through a number of
syncronization steps to make sure no new xdp_frames can be enqueued.
But there is a small chance, that xdp_frames remains which have not
been flushed/processed yet.  Flushing these during teardown, happens
from RCU context and not as usual under RX NAPI context.

The optimization introduced in commt 389ab7f0 ("xdp: introduce
xdp_return_frame_rx_napi"), missed that the flush operation can also
be called from RCU context.  Thus, we cannot always use the
xdp_return_frame_rx_napi call, which take advantage of the protection
provided by XDP RX running under NAPI protection.

The samples/bpf xdp_redirect_cpu have a --stress-mode, that is
adjusted to easier reproduce (verified by Red Hat QA).
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Like cpumap teardown, the devmap teardown code also flush remaining
xdp_frames, via bq_xmit_all() in case map entry is removed.  The code
can call xdp_return_frame_rx_napi, from the the wrong context, in-case
ndo_xdp_xmit() fails.

Fixes: 389ab7f0 ("xdp: introduce xdp_return_frame_rx_napi")
Fixes: 735fc405 ("xdp: change ndo_xdp_xmit API to support bulking")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The teardown race in cpumap is really hard to reproduce.  These changes
makes it easier to reproduce, for QA.

The --stress-mode now have a case of a very small queue size of 8, that helps
to trigger teardown flush to encounter a full queue, which results in calling
xdp_return_frame API, in a non-NAPI protect context.

Also increase MAX_CPUS, as my QA department have larger machines than me.
Tested-by: Jean-Tsung Hsiao <jhsiao@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

When removing a cpumap entry, a number of syncronization steps happen.
Eventually the teardown code __cpu_map_entry_free is invoked from/via
call_rcu.

The teardown code __cpu_map_entry_free() flushes remaining xdp_frames,
by invoking bq_flush_to_queue, which calls xdp_return_frame_rx_napi().
The issues is that the teardown code is not running in the RX NAPI
code path.  Thus, it is not allowed to invoke the NAPI variant of
xdp_return_frame.

This bug was found and triggered by using the --stress-mode option to
the samples/bpf program xdp_redirect_cpu.  It is hard to trigger,
because the ptr_ring have to be full and cpumap bulk queue max
contains 8 packets, and a remote CPU is racing to empty the ptr_ring
queue.

Fixes: 389ab7f0 ("xdp: introduce xdp_return_frame_rx_napi")
Tested-by: Jean-Tsung Hsiao <jhsiao@redhat.com>
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Pull crypto fix from Herbert Xu:
 "This fixes a performance regression in arm64 NEON crypto as well as a
  crash in x86 aegis/morus on unsupported CPUs"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: x86/aegis,morus - Fix and simplify CPUID checks
  crypto: arm64 - revert NEON yield for fast AEAD implementations

Pull networking fixes from David Miller:

 1) The real fix for the ipv6 route metric leak Sabrina was seeing, from
    Cong Wang.

 2) Fix syzbot triggers AF_PACKET v3 ring buffer insufficient room
    conditions, from Willem de Bruijn.

 3) vsock can reinitialize active work struct, fix from Cong Wang.

 4) RXRPC keepalive generator can wedge a cpu, fix from David Howells.

 5) Fix locking in AF_SMC ioctl, from Ursula Braun.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  dsa: slave: eee: Allow ports to use phylink
  net/smc: move sock lock in smc_ioctl()
  net/smc: allow sysctl rmem and wmem defaults for servers
  net/smc: no shutdown in state SMC_LISTEN
  net: aquantia: Fix IFF_ALLMULTI flag functionality
  rxrpc: Fix the keepalive generator [ver #2]
  net/mlx5e: Cleanup of dcbnl related fields
  net/mlx5e: Properly check if hairpin is possible between two functions
  vhost: reset metadata cache when initializing new IOTLB
  llc: use refcount_inc_not_zero() for llc_sap_find()
  dccp: fix undefined behavior with 'cwnd' shift in ccid2_cwnd_restart()
  tipc: fix an interrupt unsafe locking scenario
  vsock: split dwork to avoid reinitializations
  net: thunderx: check for failed allocation lmac->dmacs
  cxgb4: mk_act_open_req() buggers ->{local, peer}_ip on big-endian hosts
  packet: refine ring v3 block size test to hold one frame
  ip6_tunnel: use the right value for ipv4 min mtu check in ip6_tnl_xmit
  ipv6: fix double refcount of fib6_metrics