- 27 May, 2010 40 commits
-
-
Linus Torvalds authored
Commit e9fb7631 ("cpu-hotplug: introduce cpu_notify(), __cpu_notify(), cpu_notify_nofail()") also introduced this annoying warning: kernel/cpu.c:157: warning: 'cpu_notify_nofail' defined but not used when CONFIG_HOTPLUG_CPU wasn't set. So move that helper inside the #ifdef CONFIG_HOTPLUG_CPU region, and simplify it while at it. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: [SCSI] fix race in scsi_target_reap [SCSI] aacraid: Eliminate use after free [SCSI] arcmsr: Support HW reset for EH and polling scheme for scsi device [SCSI] bfa: fix system crash when reading sysfs fc_host statistics [SCSI] iscsi_tcp: remove sk_sleep check [SCSI] ipr: improve interrupt service routine performance [SCSI] ipr: set the data list length in the request control block [SCSI] ipr: fix a register read to use the correct address for 64 bit adapters [SCSI] ipr: include the resource path in the IOA status area structure [SCSI] ipr: implement fixes for 64 bit adapter support [SCSI] be2iscsi: correct return value in mgmt_invalidate_icds()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits) ext4: Make fsync sync new parent directories in no-journal mode ext4: Drop whitespace at end of lines ext4: Fix compat EXT4_IOC_ADD_GROUP ext4: Conditionally define compat ioctl numbers tracing: Convert more ext4 events to DEFINE_EVENT ext4: Add new tracepoints to track mballoc's buddy bitmap loads ext4: Add a missing trace hook ext4: restart ext4_ext_remove_space() after transaction restart ext4: Clear the EXT4_EOFBLOCKS_FL flag only when warranted ext4: Avoid crashing on NULL ptr dereference on a filesystem error ext4: Use bitops to read/modify i_flags in struct ext4_inode_info ext4: Convert calls of ext4_error() to EXT4_ERROR_INODE() ext4: Convert callers of ext4_get_blocks() to use ext4_map_blocks() ext4: Add new abstraction ext4_map_blocks() underneath ext4_get_blocks() ext4: Use our own write_cache_pages() ext4: Show journal_checksum option ext4: Fix for ext4_mb_collect_stats() ext4: check for a good block group before loading buddy pages ext4: Prevent creation of files larger than RLIMIT_FSIZE using fallocate ext4: Remove extraneous newlines in ext4_msg() calls ... Fixed up trivial conflict in fs/ext4/fsync.c
-
git://git.fluff.org/bjdooks/linuxLinus Torvalds authored
* 'for-linus/2634-git-updates' of git://git.fluff.org/bjdooks/linux: ARM: S5PC100: Fixup cross tree merge problems ARM: S5P: Fix the platform external interrupt issues. ARM: s5pv210_defconfig: Update s5pv210_defconfig to v2.6.34-git ARM: s5pc110_defconfig: Update s5pc110_defconfig to v2.6.34-git ARM: s5pc100_defconfig: Update s5pc100_defconfig to v2.6.34-git ARM: s5p6442_defconfig: Update s5p6442_defconfig to v2.6.34-git ARM: s5p6440_defconfig: Update s5p6440_defconfig to v2.6.34-git ARM: s3c6400_defconfig: Update s3c6400_defconfig to v2.6.34-git ARM: s3c2410_defconfig: Update s3c2410_defconfig to v2.6.34-git
-
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: schedule for removal firewire: core: use separate timeout for each transaction firewire: core: Fix tlabel exhaustion problem firewire: core: make transaction label allocation more robust firewire: core: clean up config ROM related defined constants ieee1394: mark char device files as not seekable firewire: cdev: mark char device files as not seekable firewire: ohci: cleanups and fix for nonstandard build without debug facility firewire: ohci: wait for PHY register accesses to complete firewire: ohci: fix up configuration of TI chips firewire: ohci: enable 1394a enhancements firewire: ohci: do not clear PHY interrupt status inadvertently firewire: ohci: add a function for reading PHY registers Trivial conflicts in Documentation/feature-removal-schedule.txt
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (24 commits) m68k: amiga - RTC platform device conversion m68k: amiga - Parallel port platform device conversion m68k: amiga - Serial port platform device conversion m68k: amiga - Mouse platform device conversion m68k: amiga - Keyboard platform device conversion m68k: amiga - Amiga Gayle IDE platform device conversion m68k: amiga - A4000T SCSI platform device conversion m68k/scsi: a3000 - Do not use legacy Scsi_Host.base m68k: amiga - A3000 SCSI platform device conversion m68k/scsi: gvp11 - Do not use legacy Scsi_Host.base m68k: amiga - GVP Series II SCSI zorro_driver conversion m68k/scsi: a2091 - Do not use legacy Scsi_Host.base m68k: amiga - A2091/A590 SCSI zorro_driver conversion m68k/scsi: mvme147 - Kill obsolete HOSTS_C logic m68k/scsi: a3000 - Kill a3000_scsiregs typedef m68k/scsi: gvp11 - Kill gvp11_scsiregs typedef m68k/scsi: a2091 - Kill a2091_scsiregs typedef m68k/scsi: gvp11 - Extract check_wd33c93() m68k/scsi: a3000 - Kill static global a3000_host m68k/scsi: mvme147 - Kill static global mvme147_host ...
-
git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds authored
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: Fix another nfs_wb_page() deadlock NFS: Ensure that we mark the inode as dirty if we exit early from commit NFS: Fix a lock imbalance typo in nfs_access_cache_shrinker sunrpc: fix leak on error on socket xprt setup
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: usbtouchscreen - support bigger iNexio touchscreens Input: ads7846 - return error on regulator_get() failure Input: twl4030-vibra - correct the power down sequence Input: enable onkey driver of max8925 Input: use ABS_CNT rather than (ABS_MAX + 1)
-
Vasily Khoruzhick authored
Without s3c24xx ids driver doesn't attach on s3c2410 and s3c244x Signed-off-by:
Vasily Khoruzhick <anarsoul@gmail.com> Acked-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
-
Lee Schermerhorn authored
Kamezawa Hiroyuki requested documentation for the numa_mem_id() and slab related changes. He suggested Documentation/vm/numa for this documentation. Looking at this file, it seems to me to be hopelessly out of date relative to current Linux NUMA support. At the risk of going down a rathole, I have made an attempt to rewrite the doc at a slightly higher level [I think] and provide pointers to other in-tree documents and out-of-tree man pages that cover the details. Let the games begin. Signed-off-by:
Lee Schermerhorn <lee.schermerhorn@hp.com> Cc: Tejun Heo <tj@kernel.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Nick Piggin <npiggin@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Eric Whitney <eric.whitney@hp.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Lee Schermerhorn authored
In kernel profiling requires that we be able to allocate "local" memory for each cpu. Use "cpu_to_mem()" instead of "cpu_to_node()" to support memoryless nodes. Depends on the "numa_mem_id()" patch. Signed-off-by:
-
Lee Schermerhorn authored
Example usage of generic "numa_mem_id()": The mainline slab code, since ~ 2.6.19, does not handle memoryless nodes well. Specifically, the "fast path"--____cache_alloc()--will never succeed as slab doesn't cache offnode object on the per cpu queues, and for memoryless nodes, all memory will be "off node" relative to numa_node_id(). This adds significant overhead to all kmem cache allocations, incurring a significant regression relative to earlier kernels [from before slab.c was reorganized]. This patch uses the generic topology function "numa_mem_id()" to return the "effective local memory node" for the calling context. This is the first node in the local node's generic fallback zonelist-- the same node that "local" mempolicy-based allocations would use. This lets slab cache these "local" allocations and avoid fallback/refill on every allocation. N.B.: Slab will need to handle node and memory hotplug events that could change the value returned by numa_mem_id() for any given node if recent changes to address memory hotplug don't already address this. E.g., flush all per cpu slab queues before rebuilding the zonelists while the "machine" is held in the stopped state. Performance impact on "hackbench 400 process 200" 2.6.34-rc3-mmotm-100405-1609 no-patch this-patch ia64 no memoryless nodes [avg of 10]: 11.713 11.637 ~0.65 diff ia64 cpus all on memless nodes [10]: 228.259 26.484 ~8.6x speedup The slowdown of the patched kernel from ~12 sec to ~28 seconds when configured with memoryless nodes is the result of all cpus allocating from a single node's mm pagepool. The cache lines of the single node are distributed/interleaved over the memory of the real physical nodes, but the zone lock, list heads, ... of the single node with memory still each live in a single cache line that is accessed from all processors. x86_64 [8x6 AMD] [avg of 40]: 2.883 2.845 Signed-off-by:
-
Lee Schermerhorn authored
Enable 'HAVE_MEMORYLESS_NODES' by default when NUMA configured on ia64. Initialize percpu 'numa_mem' variable when starting secondary cpus. Generic initialization will handle the boot cpu. Nothing uses 'numa_mem_id()' yet. Subsequent patch with modify slab to use this. Signed-off-by:
-
Lee Schermerhorn authored
Introduce numa_mem_id(), based on generic percpu variable infrastructure to track "nearest node with memory" for archs that support memoryless nodes. Define API in <linux/topology.h> when CONFIG_HAVE_MEMORYLESS_NODES defined, else stubs. Architectures will define HAVE_MEMORYLESS_NODES if/when they support them. Archs can override definitions of: numa_mem_id() - returns node number of "local memory" node set_numa_mem() - initialize [this cpus'] per cpu variable 'numa_mem' cpu_to_mem() - return numa_mem for specified cpu; may be used as lvalue Generic initialization of 'numa_mem' occurs in __build_all_zonelists(). This will initialize the boot cpu at boot time, and all cpus on change of numa_zonelist_order, or when node or memory hot-plug requires zonelist rebuild. Archs that support memoryless nodes will need to initialize 'numa_mem' for secondary cpus as they're brought on-line. [akpm@linux-foundation.org: fix build] Signed-off-by:
Christoph Lameter <cl@linux-foundation.org> Cc: Tejun Heo <tj@kernel.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Nick Piggin <npiggin@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Eric Whitney <eric.whitney@hp.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: <linux-arch@vger.kernel.org> Signed-off-by:
-
Lee Schermerhorn authored
ia64: Use generic percpu implementation of numa_node_id() + intialize per cpu 'numa_node' + remove ia64 cpu_to_node() macro; use generic + define CONFIG_USE_PERCPU_NUMA_NODE_ID when NUMA configured Signed-off-by:
-
Lee Schermerhorn authored
x86 arch specific changes to use generic numa_node_id() based on generic percpu variable infrastructure. Back out x86's custom version of numa_node_id() Signed-off-by:
-
Lee Schermerhorn authored
Rework the generic version of the numa_node_id() function to use the new generic percpu variable infrastructure. Guard the new implementation with a new config option: CONFIG_USE_PERCPU_NUMA_NODE_ID. Archs which support this new implemention will default this option to 'y' when NUMA is configured. This config option could be removed if/when all archs switch over to the generic percpu implementation of numa_node_id(). Arch support involves: 1) converting any existing per cpu variable implementations to use this implementation. x86_64 is an instance of such an arch. 2) archs that don't use a per cpu variable for numa_node_id() will need to initialize the new per cpu variable "numa_node" as cpus are brought on-line. ia64 is an example. 3) Defining USE_PERCPU_NUMA_NODE_ID in arch dependent Kconfig--e.g., when NUMA is configured. This is required because I have retained the old implementation by default to allow archs to be modified incrementally, as desired. Subsequent patches will convert x86_64 and ia64 to use this implemenation. Signed-off-by: -
Jan Blunck authored
The inode's i_size is not protected by the big kernel lock. Therefore it does not make sense to recommend taking the BKL in filesystems llseek operations. Instead it should use the inode's mutex or use just use i_size_read() instead. Add a note that this is not protecting file->f_pos. Signed-off-by:
Jan Blunck <jblunck@suse.de> Acked-by:
Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: John Kacur <jkacur@redhat.com> Signed-off-by:
-
jan Blunck authored
Do not use the fallback default_llseek() if the readdir operation of the filesystem still uses the big kernel lock. Since llseek() modifies file->f_pos of the directory directly it may need locking to not confuse readdir which usually uses file->f_pos directly as well Since the special characteristics of the BKL (unlocked on schedule) are not necessary in this case, the inode mutex can be used for locking as provided by generic_file_llseek(). This is only possible since all filesystems, except reiserfs, either use a directory as a flat file or with disk address offsets. Reiserfs on the other hand uses a 32bit hash off the filename as the offset so generic_file_llseek() can get used as well since the hash is always smaller than sb->s_maxbytes (= (512 << 32) - blocksize). Signed-off-by:
Jan Kara <jack@suse.cz> Acked-by:
Anders Larsen <al@alarsen.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by:
-
Jan Blunck authored
st_open() suggests that llseek() doesn't work: "We really want to do nonseekable_open(inode, filp); here, but some versions of tar incorrectly call lseek on tapes and bail out if that fails. So we disallow pread() and pwrite(), but permit lseeks." Instead of using the fallback default_llseek() the driver should use noop_llseek() which leaves the file->f_pos untouched but succeeds. Signed-off-by:
-
Jan Blunck authored
__os_scsi_tape_open() suggests that llseek() doesn't work: "We really want to do nonseekable_open(inode, filp); here, but some versions of tar incorrectly call lseek on tapes and bail out if that fails. So we disallow pread() and pwrite(), but permit lseeks." Instead of using the fallback default_llseek() the driver should use noop_llseek() which leaves the file->f_pos untouched but succeeds. Signed-off-by:
-
jan Blunck authored
This is an implementation of ->llseek useable for the rare special case when userspace expects the seek to succeed but the (device) file is actually not able to perform the seek. In this case you use noop_llseek() instead of falling back to the default implementation of ->llseek. Signed-off-by:
-
Jan Blunck authored
Use nonseekable_open() for this since seeking is not supported anyway. Signed-off-by:
-
Jan Blunck authored
This test is not doing anything since it is always false if the mISDN_read() is called from vfs_read(). Besides that the driver uses nonseekable_open() and is not using off or file->f_pos anywhere. Signed-off-by:
-
Jan Blunck authored
Signed-off-by:
-
Jan Blunck authored
osst_read()/osst_write() modify file->f_pos directly instead of the ppos given to them. The VFS later updates the file->f_pos and overwrites it with the value of ppos. Signed-off-by:
-
FUJITA Tomonori authored
parisc uses iova and iova_length in scatterlist structure instead of dma_address and dma_length. However, the accessor are used so we can convert parisc to use asm-generic/scatterlist.h easily. Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Helge Deller <deller@gmx.de> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by:
-
FUJITA Tomonori authored
There are more architectures that don't support ARCH_HAS_SG_CHAIN than those that support it. This removes removes ARCH_HAS_SG_CHAIN in asm-generic/scatterlist.h and lets arhictectures to define it. It's clearer than defining ARCH_HAS_SG_CHAIN asm-generic/scatterlist.h and undefing it in arhictectures that don't support it. Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
Matt Turner <mattst88@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by:
-
FUJITA Tomonori authored
Signed-off-by:
-
