- 03 Feb, 2018 40 commits
-
-
Greg Kroah-Hartman authored
-
Matthew Garrett authored
commit a5c03c31 upstream. Some distributions have turned on the reset attack mitigation feature, which is designed to force the platform to clear the contents of RAM if the machine is shut down uncleanly. However, in order for the platform to be able to determine whether the shutdown was clean or not, userspace has to be configured to clear the MemoryOverwriteRequest flag on shutdown - otherwise the firmware will end up clearing RAM on every reboot, which is unnecessarily time consuming. Add some additional clarity to the kconfig text to reduce the risk of systems being configured this way. Signed-off-by:
Matthew Garrett <mjg59@google.com> Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Torokhov authored
commit a1ab6902 upstream. We want to free memory reserved for interrupt mask handling only after we free functions, as function drivers might want to mask interrupts. This is needed for the followup patch to the F03 that would implement unmasking and masking interrupts from the serio pass-through port open() and close() methods. Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Dmitry Torokhov authored
commit 6abe534f upstream. Currently we register the pass-through serio port when we probe the F03 RMI function, and then, in sensor configure phase, we unmask interrupts. Unfortunately this is too late, as other drivers are free probe devices attached to the serio port as soon as it is probed. Because interrupts are masked, the IO times out, which may result in not being able to detect trackpoints on the pass-through port. To fix the issue we implement open() and close() methods for the pass-through serio port and unmask interrupts from there. We also move creation of the pass-through port form probe to configure stage, as RMI driver does not enable transport interrupt until all functions are probed (we should change this, but this is a separate topic). We also try to clear the pending data before unmasking interrupts, because some devices like to spam the system with multiple 0xaa 0x00 announcements, which may interfere with us trying to query ID of the device. Fixes: c5e8848f ("Input: synaptics-rmi4 - add support for F03") Reviewed-by:
-
Wei Yongjun authored
commit a5e19233 upstream. Add the missing unlock before return from function config_num_requests_store() in the error handling case. Fixes: c92316bf ("test_firmware: add batched firmware tests") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Narcisa Ana Maria Vasile authored
commit 8f114acd upstream. in_concentration_raw should report, according to sysfs-bus-iio documentation, a "Raw (unscaled no offset etc.) percentage reading of a substance." Modify scale to convert from ppm/ppb to percentage: 1 ppm = 0.0001% 1 ppb = 0.0000001% There is no offset needed to convert the ppm/ppb to percentage, so remove offset from IIO_CONCENTRATION (IIO_MOD_CO2) channel. Cc'd stable to reduce chance of userspace breakage in the long run as we fix this wrong bit of ABI usage. Signed-off-by:
Narcisa Ana Maria Vasile <narcisaanamaria12@gmail.com> Reviewed-by:
Matt Ranostay <matt.ranostay@konsulko.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Fabrice Gasnier authored
commit 04e491ca upstream. By default, watermark is set to '1'. Watermark is used to fine tune cyclic dma buffer period. In case watermark is left untouched (e.g. 1) and several channels are being scanned, buffer period is wrongly set (e.g. to 1 sample). As a consequence, data is never pushed to upper layer. Fix buffer period size, by taking scan channels number into account. Fixes: 2763ea05 ("iio: adc: stm32: add optional dma support") Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by:
-
Stefan Agner authored
commit d593574a upstream. Since clocks are disabled except during message transfer clocks are also disabled when spi_imx_remove gets called. Accessing registers leads to a freeeze at least on a i.MX 6ULL. Enable clocks before disabling accessing the MXC_CSPICTRL register. Fixes: 9e556dcc ("spi: spi-imx: only enable the clocks when we start to transfer a message") Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Fabio Estevam authored
commit 38b1f0fb upstream. The wakeup mechanism via RTSDEN bit relies on the system using the RTS/CTS lines, so only allow such wakeup method when the system actually has RTS/CTS support. Fixes: bc85734b ("serial: imx: allow waking up on RTSD") Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by:
Martin Kaiser <martin@kaiser.cx> Acked-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Wei Yongjun authored
commit 7defa77d upstream. Fix to return a negative error code from the port register error handling case instead of 0, as done elsewhere in this function. Fixes: 39be40ce ("serial: 8250_uniphier: fix serial port index in private data") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Masahiro Yamada authored
commit b9820a31 upstream. The error pointer from devm_reset_control_get_optional_shared() is not propagated. One of the most common problem scenarios is it returns -EPROBE_DEFER when the reset controller has not probed yet. In this case, the probe of the reset consumer should be deferred. Fixes: e2860e1f ("serial: 8250_of: Add reset support") Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Tomas Winkler authored
commit cc365dcf upstream. >From the pci power documentation: "The driver itself should not call pm_runtime_allow(), though. Instead, it should let user space or some platform-specific code do that (user space can do it via sysfs as stated above)..." However, the S0ix residency cannot be reached without MEI device getting into low power state. Hence, for mei devices that support D0i3, it's better to make runtime power management mandatory and not rely on the system integration such as udev rules. This policy cannot be applied globally as some older platforms were found to have broken power management. Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Reviewed-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
-
Ganesh Mahendran authored
commit aac6830e upstream. VM_IOREMAP is used to access hardware through a mechanism called I/O mapped memory. Android binder is a IPC machanism which will not access I/O memory. And VM_IOREMAP has alignment requiement which may not needed in binder. __get_vm_area_node() { ... if (flags & VM_IOREMAP) align = 1ul << clamp_t(int, fls_long(size), PAGE_SHIFT, IOREMAP_MAX_ORDER); ... } This patch will save some kernel vm area, especially for 32bit os. In 32bit OS, kernel vm area is only 240MB. We may got below error when launching a app: <3>[ 4482.440053] binder_alloc: binder_alloc_mmap_handler: 15728 8ce67000-8cf65000 get_vm_area failed -12 <3>[ 4483.218817] binder_alloc: binder_alloc_mmap_handler: 15745 8ce67000-8cf65000 get_vm_area failed -12 Signed-off-by:
Ganesh Mahendran <opensource.ganesh@gmail.com> Acked-by:
Martijn Coenen <maco@android.com> Acked-by:
Todd Kjos <tkjos@google.com> Signed-off-by:
-
Martijn Coenen authored
commit f5cb779b upstream. binder_poll() passes the thread->wait waitqueue that can be slept on for work. When a thread that uses epoll explicitly exits using BINDER_THREAD_EXIT, the waitqueue is freed, but it is never removed from the corresponding epoll data structure. When the process subsequently exits, the epoll cleanup code tries to access the waitlist, which results in a use-after-free. Prevent this by using POLLFREE when the thread exits. Signed-off-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
commit 11fb3799 upstream. The current code tries to test for bits that are masked out by usb_endpoint_maxp(). Instead, use the proper accessor to access the new high bandwidth bits. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Oliver Neukum authored
commit cbeef22f upstream. Quoting Hans: If we return 1 from our post_reset handler, then our disconnect handler will be called immediately afterwards. Since pre_reset blocks all scsi requests our disconnect handler will then hang in the scsi_remove_host call. This is esp. bad because our disconnect handler hanging for ever also stops the USB subsys from enumerating any new USB devices, causes commands like lsusb to hang, etc. In practice this happens when unplugging some uas devices because the hub code may see the device as needing a warm-reset and calls usb_reset_device before seeing the disconnect. In this case uas_configure_endpoints fails with -ENODEV. We do not want to print an error for this, so this commit also silences the shost_printk for -ENODEV. ENDQUOTE However, if we do that we better drop any unconditional execution and report to the SCSI subsystem that we have undergone a reset but we are not operational now. Signed-off-by:
Oliver Neukum <oneukum@suse.com> Reported-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hemant Kumar authored
commit ce5bf9a5 upstream. Upon usb composition switch there is possibility of ep0 file release happening after gadget driver bind. In case of composition switch from adb to a non-adb composition gadget will never gets bound again resulting into failure of usb device enumeration. Fix this issue by checking FFS_FL_BOUND flag and avoid extra gadget driver unbind if it is already done as part of composition switch. This fixes adb reconnection error reported on Android running v4.4 and above kernel versions. Verified on Hikey running vanilla v4.15-rc7 + few out of tree Mali patches. Reviewed-at: https://android-review.googlesource.com/#/c/582632/ Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg KH <gregkh@linux-foundation.org> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Dmitry Shmidt <dimitrysh@google.com> Cc: Badhri <badhri@google.com> Cc: Android Kernel Team <kernel-team@android.com> Signed-off-by:
Hemant Kumar <hemantk@codeaurora.org> [AmitP: Cherry-picked it from android-4.14 and updated the commit log] Signed-off-by:
Amit Pundir <amit.pundir@linaro.org> Signed-off-by:
-
Johan Hovold authored
commit 46fe895e upstream. Add new Motorola Tetra (simple) driver for Motorola Solutions TETRA PEI devices. D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0cad ProdID=9011 Rev=24.16 S: Manufacturer=Motorola Solutions Inc. S: Product=Motorola Solutions TETRA PEI interface C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) Note that these devices do not support the CDC SET_CONTROL_LINE_STATE request (for any interface). Reported-by:
Max Schulze <max.schulze@posteo.de> Tested-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Shuah Khan authored
commit ef824501 upstream. usbip host lists devices attached to vhci_hcd on the same server when user does attach over localhost or specifies the server as the remote. usbip attach -r localhost -b busid or usbip attach -r servername (or server IP) Fix it to check and not list devices that are attached to vhci_hcd. Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Shuah Khan authored
commit ef54cf0c upstream. usbip host binds to devices attached to vhci_hcd on the same server when user does attach over localhost or specifies the server as the remote. usbip attach -r localhost -b busid or usbip attach -r servername (or server IP) Unbind followed by bind works, however device is left in a bad state with accesses via the attached busid result in errors and system hangs during shutdown. Fix it to check and bail out if the device is already attached to vhci_hcd. Signed-off-by:
-
Jia-Ju Bai authored
commit c7b8f778 upstream. According to drivers/usb/serial/io_edgeport.c, the driver may sleep under a spinlock. The function call path is: edge_bulk_in_callback (acquire the spinlock) process_rcvd_data process_rcvd_status change_port_settings send_iosp_ext_cmd write_cmd_usb usb_kill_urb --> may sleep To fix it, the redundant usb_kill_urb() is removed from the error path after usb_submit_urb() fails. This possible bug is found by my static analysis tool (DSAC) and checked by my code review. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Oliver Neukum authored
commit df1cc78a upstream. This devices drops random bytes from messages if you talk to it too fast. Signed-off-by:
-
Hans de Goede authored
commit f0386c08 upstream. When disconnected sometimes the cdc-acm driver logs errors like these: [20278.039417] cdc_acm 2-2:2.1: urb 9 failed submission with -19 [20278.042924] cdc_acm 2-2:2.1: urb 10 failed submission with -19 [20278.046449] cdc_acm 2-2:2.1: urb 11 failed submission with -19 [20278.049920] cdc_acm 2-2:2.1: urb 12 failed submission with -19 [20278.053442] cdc_acm 2-2:2.1: urb 13 failed submission with -19 [20278.056915] cdc_acm 2-2:2.1: urb 14 failed submission with -19 [20278.060418] cdc_acm 2-2:2.1: urb 15 failed submission with -19 Silence these by not logging errors when the result is -ENODEV. Signed-off-by:
-
Greg Kroah-Hartman authored
commit d08dd3f3 upstream. This adds a new device id for Chilitag devices to the pl2303 driver. Reported-by:
"Chu.Mike [朱堅宜]" <Mike-Chu@prolific.com.tw> Acked-by:
-
OKAMOTO Yoshiaki authored
commit 69341bd1 upstream. FS040U modem is manufactured by omega, and sold by Fujisoft. This patch adds ID of the modem to use option1 driver. Interface 3 is used as qmi_wwan, so the interface is ignored. Signed-off-by:
Yoshiaki Okamoto <yokamoto@allied-telesis.co.jp> Signed-off-by:
Hiroyuki Yamamoto <hyamamo@allied-telesis.co.jp> Acked-by:
-
Gaurav Kohli authored
commit b027e229 upstream. There can be a race, if receive_buf call comes before tty initialization completes in n_tty_open and tty->disc_data may be NULL. CPU0 CPU1 ---- ---- 000|n_tty_receive_buf_common() n_tty_open() -001|n_tty_receive_buf2() tty_ldisc_open.isra.3() -002|tty_ldisc_receive_buf(inline) tty_ldisc_setup() Using ldisc semaphore lock in tty_init_dev till disc_data initializes completely. Signed-off-by:
Gaurav Kohli <gkohli@codeaurora.org> Reviewed-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Gilad Ben-Yossef authored
commit dc5591dc upstream. When moving from internal for kernel FIPS infrastructure the FIPS event irq handling code was left with the old ifdef by mistake. Fix it. Fixes: b7e607bf ("staging: ccree: move FIPS support to kernel infrastructure") Signed-off-by:
Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by:
-
Gilad Ben-Yossef authored
commit 46df8824 upstream. backup_info field is only allocated for decrypt code path. The field was not nullified when not used causing a kfree in an error handling path to attempt to free random addresses as uncovered in stress testing. Fixes: 737aed94 ("staging: ccree: save ciphertext for CTS IV") Signed-off-by:
-
Dmitry Eremin authored
commit 9b046013 upstream. The logic of the original commit 4d99b258 ("staging: lustre: avoid intensive reconnecting for ko2iblnd") was assumed conditional free of struct kib_conn if the second argument free_conn in function kiblnd_destroy_conn(struct kib_conn *conn, bool free_conn) is true. But this hunk of code was dropped from original commit. As result the logic works wrong and current code use struct kib_conn after free. > drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c > 3317 kiblnd_destroy_conn(conn, !peer); > ^^^^ Freed always (but should be conditionally) > 3318 > 3319 spin_lock_irqsave(lock, flags); > 3320 if (!peer) > 3321 continue; > 3322 > 3323 conn->ibc_peer = peer; > ^^^^^^^^^^^^^^ Use after free > 3324 if (peer->ibp_reconnected < KIB_RECONN_HIGH_RACE) > 3325 list_add_tail(&conn->ibc_list, > ^^^^^^^^^^^^^^ Use after free > 3326 &kiblnd_data.kib_reconn_list); > 3327 else > 3328 list_add_tail(&conn->ibc_list, > ^^^^^^^^^^^^^^ Use after free > 3329 &kiblnd_data.kib_reconn_wait); To avoid confusion this fix moved the freeing a struct kib_conn outside of the function kiblnd_destroy_conn() and free as it was intended in original commit. Fixes: 4d99b258 ("staging: lustre: avoid intensive reconnecting for ko2iblnd") Signed-off-by:
Dmitry Eremin <Dmitry.Eremin@intel.com> Reviewed-by:
Andreas Dilger <andreas.dilger@intel.com> Signed-off-by:
-
Paolo Bonzini authored
[ Upstream commit bd89525a ] This reverts commits ae1f5767 and ac9b305c. If the hardware doesn't support MOVBE, but L0 sets CPUID.01H:ECX.MOVBE in L1's emulated CPUID information, then L1 is likely to pass that CPUID bit through to L2. L2 will expect MOVBE to work, but if L1 doesn't intercept #UD, then any MOVBE instruction executed in L2 will raise #UD, and the exception will be delivered in L2. Commit ac9b305c is a better and more complete version of ae1f5767 ("KVM: nVMX: Do not emulate #UD while in guest mode"); however, neither considers the above case. Suggested-by:
Jim Mattson <jmattson@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Stefan Schake authored
[ Upstream commit ce9caf2f ] We were calling enable_irq on bind, where it was already enabled previously by the IRQ helper. Additionally, dev->irq is not set correctly until after postinstall and so was always zero here, triggering a warning in 4.15. Fix both by moving the enable to the power management resume path, where we know there was a previous disable invocation during suspend. Fixes: 253696cc ("drm/vc4: Account for interrupts in flight") Signed-off-by:
Stefan Schake <stschake@gmail.com> Signed-off-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/1514563543-32511-1-git-send-email-stschake@gmail.comTested-by:
Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by:
-
Larry Finger authored
[ Upstream commit b77992d2 ] When not associated with an AP, wifi device drivers should respond to the SIOCGIWESSID ioctl with a zero-length string for the SSID, which is the behavior expected by dhcpcd. Currently, this driver returns an error code (-1) from the ioctl call, which causes dhcpcd to assume that the device is not a wireless interface and therefore it fails to work correctly with it thereafter. This problem was reported and tested at https://github.com/lwfinger/rtl8188eu/issues/234. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Sasha Levin <alexander.levin@verizon.com> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit b2fc059f ] Avoid dereferencing pointer g until after g has been sanity null checked; move the assignment of cdev much later when it is required into a more local scope. Detected by CoverityScan, CID#1222135 ("Dereference before null check") Fixes: b785ea7c ("usb: gadget: composite: fix ep->maxburst initialization") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Juergen Gross authored
[ Upstream commit 42b3a4cb ] Add early interrupt handlers activated by idt_setup_early_handler() to the handlers supported by Xen pv guests. This will allow for early WARN() calls not crashing the guest. Suggested-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: xen-devel@lists.xenproject.org Cc: boris.ostrovsky@oracle.com Link: https://lkml.kernel.org/r/20171124084221.30172-1-jgross@suse.comSigned-off-by:
-
Icenowy Zheng authored
[ Upstream commit 04226916 ] A new usbid of UTV007 is found in a newly bought device. The usbid is 1f71:3301. The ID on the chip is: UTV007 A89029.1 1520L18K1 Both video and audio is tested with the modified usbtv driver. Signed-off-by:
Icenowy Zheng <icenowy@aosc.io> Acked-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 5f1aa51c ] Booting a kernel results in the kernel warning us about the following PPI interrupts configuration: [ 0.105127] smp: Bringing up secondary CPUs ... [ 0.110545] GIC: PPI11 is secure or misconfigured [ 0.110551] GIC: PPI13 is secure or misconfigured Fix this by using the appropriate edge configuration for PPI11 and PPI13, this is similar to what was fixed for Northstar (BCM5301X) in commit 0e34079c ("ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags"). Fixes: 7b2e987d ("ARM: NSP: add minimal Northstar Plus device tree") Fixes: 1a9d53ca ("ARM: dts: NSP: Add TWD Support to DT") Acked-by:
Jon Mason <jon.mason@broadcom.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 77416ab3 ] The AHCI controller is currently enabled for all of these boards: bcm958623hr and bcm958625hr would result in a hard hang on boot that we cannot get rid of. Since this does not appear to have an easy and simple fix, just disable the AHCI controller for now until this gets resolved. Fixes: 70725d6e ("ARM: dts: NSP: Enable SATA on bcm958625hr") Fixes: d454c376 ("ARM: dts: NSP: Add new DT file for bcm958623hr") Acked-by:
-
Sara Sharon authored
[ Upstream commit 0232d2cd ] When getting HW rfkill we get stop_device being called from two paths. One path is the IRQ calling stop device, and updating op mode and stack. As a result, cfg80211 is running rfkill sync work that shuts down all devices (second path). In the second path, we eventually get to iwl_mvm_stop_device which calls iwl_fw_dump_conf_clear->iwl_fw_dbg_stop_recording, that access periphery registers. The device may be stopped at this point from the first path, which will result with a failure to access those registers. Simply checking for the trans status is insufficient, since the race will still exist, only minimized. Instead, move the stop from iwl_fw_dump_conf_clear (which is getting called only from stop path) to the transport stop device function, where the access is always safe. This has the added value, of actually stopping dbgc before stopping device even when the stop is initiated from the transport. Fixes: 1efc3843 ("iwlwifi: stop dbgc recording before stopping DMA") Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
[ Upstream commit d1b275ff ] The MONITOR type is missing in the interface type switch. Add it. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit 72753590 ] _vreg_ is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after _vreg_ has been null checked. This issue was detected with the help of Coccinelle. Fixes: aa497613 ("ufs: Add regulator enable support") Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Reviewed-by:
Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
