This librarizes the perf.data file mapping and handling in various
perf tools, roughly reducing the amount of code and fixing the
places that mmap from beginning of the file whereas we want to mmap
from the beginning of the data, leading to page fault because the
mmap window is too small since the trace info are written in the
file too.

TODO:

 - convert perf timechart too
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <20091007104729.GD5043@nowhere>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

This drops the trace.info file and move its contents into the
common perf.data file.

This is done by creating a new trace_info section into this file. A
user of perf headers needs to call perf_header__set_trace_info() to
save the trace meta informations into the perf.data file.

A file created by perf after his patch is unsupported by previous
version because the size of the headers have increased.

That said, it's two new fields that have been added in the end of
the headers, and those could be ignored by previous versions if
they just handled the dynamic header size and then ignore the
unknow part. The offsets guarantee the compatibility. We'll do a
-stable fix for that.

But current previous versions handle the header size using its
static size, not dynamic, then it's not backward compatible with
trace records.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091006213643.GA5343@nowhere>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Currently, we are mapping perf.data in the beginning of the file
and use the data offset as a buffer offset.

This may exceed the mapping area if the data offset is upper than
page_size * mmap_window and result in a page fault (thing that
happen if we merge trace.info in perf.data).

Instead, let's start the mapping in the page that matches our data
offset.

v2: Drop a junk from another patch (trace_report() removal)
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <1254856886-10348-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Use auto-freq events by default in perf record and
perf top.

This allows more consistent hardware event sampling,
regardless of the intensity of the underlying event.

It also keeps us from over-sampling on larger/busier
systems.

(also make surrounding initializations more consistent)

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Needed for distinguishing string fields in event stream processing.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: rostedt@goodmis.org
Cc: lizf@cn.fujitsu.com
Cc: hch@infradead.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1254809398-8078-4-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Needed to fully qualify event names for event stream processing.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: rostedt@goodmis.org
Cc: lizf@cn.fujitsu.com
Cc: hch@infradead.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1254809398-8078-3-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The sign info used for filters in the kernel is also useful to
applications that process the trace stream.  Add it to the format
files and make it available to userspace.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: rostedt@goodmis.org
Cc: lizf@cn.fujitsu.com
Cc: hch@infradead.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1254809398-8078-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge reason: Upcoming patch is dependent on a fix in perf/urgent.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Some architectures such as Sparc, ARM and MIPS (basically
everything with flush_dcache_page()) need to deal with dcache
aliases by carefully placing pages in both kernel and user maps.

These architectures typically have to use vmalloc_user() for this.

However, on other architectures, vmalloc() is not needed and has
the downsides of being more restricted and slower than regular
allocations.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: David Miller <davem@davemloft.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1254830228.21044.272.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
LKML-Reference: <200910061138.n96BcqkJ004709@int-mx03.intmail.prod.int.phx2.redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Asm routines that end up having size equal to zero are not really
zero sized, and as now we do kernel_maps__fixup_sym_end, at least
for kernel routines this gets fixed.

A similar fixup needs to be done for the userspace bits as well,
but as this fixup started only because in /proc/kallsyms we don't
have the end address nor the function size, it appeared here first.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1254796503-27203-1-git-send-email-acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

The syscall event definitions use long for the syscall exit ret
value, but unsigned long for the same thing in the format and field
definitions.  Change them all to long.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: rostedt@goodmis.org
Cc: lizf@cn.fujitsu.com
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1254808849-7829-4-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Add missing BLOCK_IOPOLL_SOFTIRQ entry.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: rostedt@goodmis.org
Cc: lizf@cn.fujitsu.com
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1254808849-7829-3-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

And some minor whitespace cleanup.
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: rostedt@goodmis.org
Cc: lizf@cn.fujitsu.com
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <1254808849-7829-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

In resolve_symbol, as we're moving to breaking the kernel symbols
list per address ranges, i.e. kernel linking sections, so that we
don't have a big kernel_map that in its range covers what is in the
modules.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

$ cut -d' ' -f1 /proc/modules|grep _|wc -l
 29
 $ cut -d' ' -f1 /proc/modules|grep _|sed 's/$/.ko'/g|while read n;do find /lib/modules/`uname -r` -name $n;done|wc -l
 12

For instance:

 $ grep ^aes_x86 /proc/modules
 aes_x86_64 9056 2 - Live 0xffffffffa0091000
 $ l /lib/modules/2.6.31-tip/kernel/arch/x86/crypto/aes-x86_64.ko
 -rw-r--r-- 1 root root 136438 2009-09-22 19:05 /lib/modules/2.6.31-tip/kernel/arch/x86/crypto/aes-x86_64.ko

Handle that by introducing a strxfrchar routine that replaces
dashes with underscores when matching file names to loaded modules.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

So that we get kallsyms processing closer to vmlinux + modules
symtabs processing.

One change in behaviour is that since when one specifies --vmlinux
-m should be used to ask for modules, so it is now for kallsyms as
well.

Also continue if one manages to load the vmlinux data but module
processing fails, so that at least some analisys can be done with
part of the needed symbols.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

If we launch the child on behalf of the user, ensure that it dies
along with ourselves when we are interrupted.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
LKML-Reference: <1254616502-4728-1-git-send-email-chris@chris-wilson.co.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

As it was not being exposed via any command line and with --dsos/--comms
we can do this and even more, like asking for just kernel + some module:

[root@doppio linux-2.6-tip]# perf report --dsos \[kernel\],\[drm\]
--vmlinux /home/acme/git/build/tip-recvmmsg/vmlinux --modules | head -15
 # Samples: 619669
 #
 # Overhead          Command  Shared Object  Symbol
 # ........  ...............  .............  ......
 #
      7.12%          swapper  [kernel]       [k] read_hpet
      6.86%             init  [kernel]       [k] read_hpet
      6.22%             init  [kernel]       [k] mwait_idle_with_hints
      5.34%          swapper  [kernel]       [k] mwait_idle_with_hints
      3.01%          firefox  [kernel]       [.] vread_hpet
      2.14%             Xorg  [drm]          [k] drm_clflush_pages
      2.09%           pidgin  [kernel]       [.] vread_hpet
      1.58%     npviewer.bin  [kernel]       [.] vread_hpet
      1.37%          swapper  [kernel]       [k] hpet_next_event
      1.23%             Xorg  [kernel]       [k] read_hpet
[root@doppio linux-2.6-tip]#
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20091003233048.GA30535@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Now perf report and annotate do the callgraph/hit processing in
their specialized hist_entry__add functions.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Representing modules as struct map entries, backed by a DSO, etc,
using /proc/modules to find where the module is loaded.

DSOs now can have a short and long name, so that in verbose mode we
can show exactly which .ko or vmlinux image was used.

As kernel modules now are a DSO separate from the kernel, we can
ask for just the hits for a particular set of kernel modules, just
like we can do with shared libraries:

[root@doppio linux-2.6-tip]# perf report -n --vmlinux
/home/acme/git/build/tip-recvmmsg/vmlinux --modules --dsos \[drm\] | head -15
    84.58%      13266             Xorg  [k] drm_clflush_pages
     4.02%        630             Xorg  [k] trace_kmalloc.clone.0
     3.95%        619             Xorg  [k] drm_ioctl
     2.07%        324             Xorg  [k] drm_addbufs
     1.68%        263             Xorg  [k] drm_gem_close_ioctl
     0.77%        120             Xorg  [k] drm_setmaster_ioctl
     0.70%        110             Xorg  [k] drm_lastclose
     0.68%        106             Xorg  [k] drm_open
     0.54%         85             Xorg  [k] drm_mm_search_free
[root@doppio linux-2.6-tip]#

Specifying --dsos /lib/modules/2.6.31-tip/kernel/drivers/gpu/drm/drm.ko
would have the same effect. Allowing specifying just 'drm.ko' is left
for another patch.

Processing kallsyms so that per kernel module struct map are
instantiated was also left for another patch. That will allow
removing the module name from each of its symbols.

struct symbol was reduced by removing the ->module backpointer and
moving it (well now the map) to struct symbol_entry in perf top,
that is its only user right now.

The total linecount went down by ~500 lines.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Right now generate-cmdlist.sh is not executable, so we
should call it as an argument ".".

This fixes cases where due to different umask defaults
the generate-cmdlist.sh script is not executable in
a kernel tree checkout.
Signed-off-by: Mulyadi Santosa <mulyadi.santosa@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <f284c33d0909251201w422e9687x8cd3a784e85adf7d@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

While at it: we can traverse ctx->group_list to get all
group leader, it should be safe since we hold ctx->mutex.

Changlog v1->v2:

  - remove WARN_ON_ONCE() according to Peter Zijlstra's suggestion
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4ABC5AF9.6060808@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Paul Mackerras says:

 "Actually, looking at this more closely, it has to be a group
 leader anyway since it's at the top level of ctx->group_list.  In
 fact I see four places where we do:

  list_for_each_entry(event, &ctx->group_list, group_entry) {
	if (event == event->group_leader)
		...

 or the equivalent, three of which appear to have been introduced
 by afedadf2 ("perf_counter: Optimize sched in/out of counters")
 back in May by Peter Z.

 As far as I can see the if () is superfluous in each case (a
 singleton event will be a group of 1 and will have its
 group_leader pointing to itself)."

 [ See: http://marc.info/?l=linux-kernel&m=125361238901442&w=2 ]

And Peter Zijlstra points out this is a bugfix:

 "The intent was to call event_sched_{in,out}() for single event
  groups because that's cheaper than group_sched_{in,out}(),
  however..

  - as you noticed, I got the condition wrong, it should have read:

      list_empty(&event->sibling_list)

  - it failed to call group_can_go_on() which deals with ->exclusive.

  - it also doesn't call hw_perf_group_sched_in() which might break
    power."

 [ See: http://marc.info/?l=linux-kernel&m=125369523318583&w=2 ]

Changelog v1->v2:

 - Fix the title name according to Peter Zijlstra's suggestion

 - Remove the comments and WARN_ON_ONCE() as Peter Zijlstra's
   suggestion
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <4ABC5A55.7000208@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

For doing work on the Linux power management components, I need to
make long (30+ seconds) traces. Currently, this then results in a
HUGE svg file, with mostly process data that isn't interesting.

This patch adds a --power-only mode to perf timechart that only
outputs the CPU power section of the SVG; this significantly
reduces the size of the SVG file, making even 30+ second traces
viewable with inkscape.

As a minor tweak for the same effect, the minimum text size is
decreased; current inkscape cannot zoom in deep enough to show text
this small, but it reduces inkscape compute time.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: peterz@infradead.org
LKML-Reference: <20090924154013.0675ab71@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20090924212400.GA15321@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Several variables are not used at all, cut'n'paste leftovers.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
LKML-Reference: <20090928200818.GF3361@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Several variables are not used at all, cut'n'paste leftovers.

Also check if the sample_type is RAW earlier, to avoid needless
searches.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Threads can have many and kernel modules will be represented as a
tree of maps as well.

Ah, and for a perf.data with 146607 samples:

Before:

[root@doppio ~]# perf stat -r 5 perf report > /dev/null

 Performance counter stats for 'perf report' (5 runs):

     699.823680  task-clock-msecs         #      0.991 CPUs    ( +-   0.454% )
             74  context-switches         #      0.000 M/sec   ( +-   1.709% )
              2  CPU-migrations           #      0.000 M/sec   ( +-  17.008% )
          23114  page-faults              #      0.033 M/sec   ( +-   0.000% )
     1381257019  cycles                   #   1973.721 M/sec   ( +-   0.290% )
     1456894438  instructions             #      1.055 IPC     ( +-   0.007% )
       18779818  cache-references         #     26.835 M/sec   ( +-   0.380% )
         641799  cache-misses             #      0.917 M/sec   ( +-   1.200% )

    0.705972729  seconds time elapsed   ( +-   0.501% )

[root@doppio ~]#

After

 Performance counter stats for 'perf report' (5 runs):

     691.261451  task-clock-msecs         #      0.993 CPUs    ( +-   0.307% )
             72  context-switches         #      0.000 M/sec   ( +-   0.829% )
              6  CPU-migrations           #      0.000 M/sec   ( +-  18.409% )
          23127  page-faults              #      0.033 M/sec   ( +-   0.000% )
     1366395876  cycles                   #   1976.670 M/sec   ( +-   0.153% )
     1443136016  instructions             #      1.056 IPC     ( +-   0.012% )
       17956402  cache-references         #     25.976 M/sec   ( +-   0.325% )
         661924  cache-misses             #      0.958 M/sec   ( +-   1.335% )

    0.696127275  seconds time elapsed   ( +-   0.377% )

I.e. we see some speedup too.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
LKML-Reference: <20090928174846.GA3361@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Move histogram related functions into their own files (hist.c and
hist.h) and make use of them in builtin-annotate.c and
builtin-report.c.
Signed-off-by: John Kacur <jkacur@redhat.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <alpine.LFD.2.00.0909281531180.8316@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <20090925220239.GA5488@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

.. duplicated by merging the same fix twice, for details see commit
0d9df251 ("Merge
git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The following commit made console open fails while booting:

	commit b50989dc
	Author: Alan Cox <alan@linux.intel.com>
	Date:   Sat Sep 19 13:13:22 2009 -0700

	tty: make the kref destructor occur asynchronously

Due to tty release routines run in a workqueue now, error like the
following will be reported while booting:

INIT open /dev/console Input/output error

It also causes hibernation regression to appear as reported at
http://bugzilla.kernel.org/show_bug.cgi?id=14229

The reason is that now there's latency issue with closing, but when
we open a "closing not finished" tty, -EIO will be returned.

Fix it as per the following Alan's suggestion:

  Fun but it's actually not a bug and the fix is wrong in itself as
  the port may be closing but not yet being destructed, in which case
  it seems to do the wrong thing.  Opening a tty that is closing (and
  could be closing for long periods) is supposed to return -EIO.

  I suspect a better way to deal with this and keep the old console
  timing is to split tty->shutdown into two functions.

  tty->shutdown() - called synchronously just before we dump the tty
  onto the waitqueue for destruction

  tty->cleanup() - called when the destructor runs.

  We would then do the shutdown part which can occur in IRQ context
  fine, before queueing the rest of the release (from tty->magic = 0
  ...  the end) to occur asynchronously

  The USB update in -next would then need a call like

       if (tty->cleanup)
               tty->cleanup(tty);

  at the top of the async function and the USB shutdown to be split
  between shutdown and cleanup as the USB resource cleanup and final
  tidy cannot occur synchronously as it needs to sleep.

  In other words the logic becomes

       final kref put
               make object unfindable

       async
               clean it up
Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
[ rjw: Rebased on top of 2.6.31-git, reworked the changelog. ]
Signed-off-by: "Rafael J. Wysocki" <rjw@sisk.pl>
[ Changed serial naming to match new rules, dropped tty_shutdown as per
  comments from Alan Stern  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 3d5b6fb4 ("ACPI: Kill overly
verbose "power state" log messages") removed the actual use of this
variable, but didn't remove the variable itself, resulting in build
warnings like

  drivers/acpi/processor_idle.c: In function ‘acpi_processor_power_init’:
  drivers/acpi/processor_idle.c:1169: warning: unused variable ‘i’

Just get rid of the now unused variable.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code

But leave TTM code alone, something is fishy there with global vm_ops
being used.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hrtimer: Eliminate needless reprogramming of clock events device

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: IA64=y ACPI=n build fix
  ACPI: Kill overly verbose "power state" log messages
  ACPI: fix Compaq Evo N800c (Pentium 4m) boot hang regression
  ACPI: Clarify resource conflict message
  thinkpad-acpi: fix CONFIG_THINKPAD_ACPI_HOTKEY_POLL build problem

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix hwpoison code related build failure on 32-bit NUMAQ