Skip to content

L
linux
Switch branch/tag
  1. 17 Sep, 2011 2 commits
  3. 16 Sep, 2011 10 commits
    • Nicholas Bellinger's avatar
      iscsi-target: Fix sendpage breakage with proper padding+DataDigest iovec offsets · 40b05497
      Nicholas Bellinger authored 
      This patch fixes a bug in the iscsit_fe_sendpage_sg() transmit codepath that
was originally introduced with the v3.1 iscsi-target merge that incorrectly
uses hardcoded cmd->iov_data_count values to determine cmd->iov_data[] offsets
for extra outgoing padding and DataDigest payload vectors.

This code is obviously incorrect for the DataDigest enabled case with sendpage
offload, and this fix ensures correct operation for padding + DataDigest,
padding only, and DataDigest only cases.  The bug was introduced during a
pre-merge change in iscsit_fe_sendpage_sg() to natively use struct scatterlist
instead of the legacy v3.0 struct se_mem logic.

Cc: Andy Grover <agrover@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      40b05497
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://github.com/dtor/input · 279b1e0f
      Linus Torvalds authored 
      * 'for-linus' of git://github.com/dtor/input:
  Input: wacom - fix touch parsing on newer Bamboos
  Input: bcm5974 - add MacBookAir4,1 trackpad support
  Input: wacom - add POINTER and DIRECT device properties
  Input: adp5588-keys - remove incorrect modalias
  Input: cm109 - fix checking return value of usb_control_msg
  Input: wacom - advertise BTN_TOOL_PEN and BTN_STYLUS for PenPartner
  Input: wacom - remove pressure for touch devices
      279b1e0f
    • Ming Lei's avatar
      firewire: ohci: add no MSI quirk for O2Micro controller · f39aa30d
      Ming Lei authored 
      This fixes https://bugs.launchpad.net/ubuntu/+source/linux/+bug/801719 .

An O2Micro PCI Express FireWire controller,
"FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Device [1217:11f7] (rev 05)"
which is a combination device together with an SDHCI controller and some
sort of storage controller, misses SBP-2 status writes from an attached
FireWire HDD.  This problem goes away if MSI is disabled for this
FireWire controller.

The device reportedly does not require QUIRK_CYCLE_TIMER.
Signed-off-by: default avatarMing Lei <ming.lei@canonical.com>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (amended changelog)
Cc: <stable@kernel.org>
      f39aa30d
    • Nicholas Bellinger's avatar
      iscsi-target: Disable markers + remove dangerous local scope array usage · 2ff017f5
      Nicholas Bellinger authored 
      This patch makes iscsi-target explictly disable OFMarker=Yes and IFMarker=yes
parameter key usage during iscsi login by setting IFMarkInt_Reject and
OFMarkInt_Reject values in iscsi_enforce_integrity_rules() to effectively
disable iscsi marker usage.  With this patch, an initiator proposer asking
to enable either marker parameter keys will be issued a 'No' response, and
the target sets OFMarkInt + IFMarkInt parameter key response to 'Irrelevant'.

With markers disabled during iscsi login, this patch removes the problematic
on-stack local-scope array for marker intervals in iscsit_do_rx_data() +
iscsit_do_tx_data(), and other related marker code in iscsi_target_util.c.
This fixes a potentional stack smashing scenario with small range markers
enabled and a large MRDSL as reported by DanC here:

[bug report] target: stack can be smashed
http://www.spinics.net/lists/target-devel/msg00453.htmlReported-by: default avatarDan Carpenter <error27@gmail.com>
Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      2ff017f5
    • Nicholas Bellinger's avatar
      target: Skip non hex characters for VPD=0x83 NAA IEEE Registered Extended · 784eb99e
      Nicholas Bellinger authored 
      This patch adds target_parse_naa_6h_vendor_specific() to address a bug where the
conversion of PRODUCT SERIAL NUMBER to use hex2bin() in target_emulate_evpd_83()
was not doing proper isxdigit() checking.  This conversion of the vpd_unit_serial
configifs attribute is done while generating a VPD=0x83 NAA IEEE Registered
Extended DESIGNATOR format's 100 bits of unique VENDOR SPECIFIC IDENTIFIER +
VENDOR SPECIFIC IDENTIFIER EXTENSION area.

This patch allows vpd_unit_serial (VPD=0x80) and the T10 Vendor ID DESIGNATOR
format (VPD=0x83) to continue to use free-form variable length ASCII values,
and now skips any non hex characters for fixed length NAA IEEE Registered Extended
DESIGNATOR format (VPD=0x83) requring the binary conversion.

This was originally reported by Martin after the v3.1-rc1 change to use hex2bin()
in commit 11650b85 where the use of non hex
characters in vpd_unit_serial generated different values than the original
v3.0 internal hex -> binary code.  This v3.1 change caused a problem with
filesystems who write a NAA DESIGNATOR onto it's ondisk metadata, and this patch
will (again) change existing values to ensure that non hex characters are not
included in the fixed length NAA DESIGNATOR.

Note this patch still expects vpd_unit_serial to be set via existing userspace
methods of uuid generation, and does not do strict formatting via configfs input.

The original bug report and thread can be found here:

NAA breakage
http://www.spinics.net/lists/target-devel/msg00477.html

The v3.1-rc1 formatting of VPD=0x83 w/o this patch:

VPD INQUIRY: Device Identification page
  Designation descriptor number 1, descriptor length: 20
    designator_type: NAA,  code_set: Binary
    associated with the addressed logical unit
      NAA 6, IEEE Company_id: 0x1405
      Vendor Specific Identifier: 0xffde35ebf
      Vendor Specific Identifier Extension: 0x3092f498ffa820f9
      [0x6001405ffde35ebf3092f498ffa820f9]
  Designation descriptor number 2, descriptor length: 56
    designator_type: T10 vendor identification,  code_set: ASCII
    associated with the addressed logical unit
      vendor id: LIO-ORG
      vendor specific: IBLOCK:ffde35ec-3092-4980-a820-917636ca54f1

The v3.1-final formatting of VPD=0x83 w/ this patch:

VPD INQUIRY: Device Identification page
  Designation descriptor number 1, descriptor length: 20
    designator_type: NAA,  code_set: Binary
    associated with the addressed logical unit
      NAA 6, IEEE Company_id: 0x1405
      Vendor Specific Identifier: 0xffde35ec3
      Vendor Specific Identifier Extension: 0x924980a82091763
      [0x6001405ffde35ec30924980a82091763]
  Designation descriptor number 2, descriptor length: 56
    designator_type: T10 vendor identification,  code_set: ASCII
    associated with the addressed logical unit
      vendor id: LIO-ORG
      vendor specific: IBLOCK:ffde35ec-3092-4980-a820-917636ca54f1

(v2: Fix parsing code to dereference + check for string terminator instead
     of null pointer to ensure a zeroed payload for vpd_unit_serial less
     than 100 bits of NAA DESIGNATOR VENDOR SPECIFIC area.  Also, remove
     the unnecessary bitwise assignment)
Reported-by: default avatarMartin Svec <martin.svec@zoner.cz>
Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      784eb99e
    • Linus Torvalds's avatar
      Merge branch 'stable/bug.fixes' of git://oss.oracle.com/git/kwilk/xen · abbe0d3c
      Linus Torvalds authored 
      * 'stable/bug.fixes' of git://oss.oracle.com/git/kwilk/xen:
  xen/i386: follow-up to "replace order-based range checking of M2P table by linear one"
  xen/irq: Alter the locking to use a mutex instead of a spinlock.
  xen/e820: if there is no dom0_mem=, don't tweak extra_pages.
  xen: disable PV spinlocks on HVM
      abbe0d3c
    • Christoph Hellwig's avatar
      tcm_fc: Work queue based approach instead of managing own thread and event based mechanism · 58fc73d1
      Christoph Hellwig authored 
      Problem: Changed from wake_up_interruptible -> wake_up_process and
wait_event_interruptible-> schedule_timeout_interruptible broke the FCoE
target.  Earlier approach of wake_up_interruptible was also looking at
'queue_cnt' which is not necessary, because it increment of 'queue_cnt'
with wake_up_inetrriptible / waker_up_process introduces race condition.

Fix: Instead of fixing the code which used wake_up_process and remove
'queue_cnt', using work_queue based approach is cleaner and acheives
same result. As well, work queue based approach has less programming
overhead and OS manages threads which processes work queues.

This patch is developed by Christoph Hellwig and reviwed+validated by
Kiran Patil.
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarKiran Patil <kiran.patil@intel.com>
Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      58fc73d1
    • Kiran Patil's avatar
      tcm_fc: Invalidation of DDP context for FCoE target in error conditions · 079587b4
      Kiran Patil authored 
      Problem: HW DDP context wasn;t invalidated in case of ABORTS, etc...
This leads to the problem where memory pages which are used for DDP
as user descriptor could get reused for some other purpose (such as to
satisfy new memory allocation request either by kernel or user mode threads)
and since HW DDP context was not invalidated, HW continue to write to
those pages, hence causing memory corruption.

Fix: Either on incoming ABORTS or due to exchange time out, allowed the
target to cleanup HW DDP context if it was setup for respective ft_cmd.
Added new function to perform this cleanup, furthur it can be enhanced
for other cleanup activity.

Additinal Notes: To avoid calling ddp_done from multiple places, composed
the functionality in helper function "ft_invl_hw_context" and it is being
called from multiple places. Cleaned up code in function "ft_recv_write_data"
w.r.t DDP.
Signed-off-by: default avatarKiran Patil <kiran.patil@intel.com>
Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      079587b4
    • Roland Dreier's avatar
      target: Fix race between multiple invocations of target_qf_do_work() · bcac364a
      Roland Dreier authored 
      When work is scheduled with schedule_work(), the work can end up
running on multiple CPUs at the same time -- this happens if
the work is already running on one CPU and schedule_work() is called
on another CPU.  This leads to list corruption with target_qf_do_work(),
which is roughly doing:

	spin_lock(...);
	list_for_each_entry_safe(...) {
		list_del(...);
		spin_unlock(...);

		// do stuff

		spin_lock(...);
	}

With multiple CPUs running this code, one CPU can end up deleting the
list entry that the other CPU is about to work on.

Fix this by splicing the list entries onto a local list and then
operating on that in the work function.  This way, each invocation of
target_qf_do_work() operates on its own local list and so multiple
invocations don't corrupt each other's list.  This also avoids dropping
and reacquiring the lock for each list entry.
Signed-off-by: default avatarRoland Dreier <roland@purestorage.com>
Signed-off-by: default avatarNicholas Bellinger <nab@linux-iscsi.org>
      bcac364a
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://github.com/tiwai/sound · c455ea4f
      Linus Torvalds authored 
      * 'for-linus' of git://github.com/tiwai/sound:
  ALSA: pcm - fix race condition in wait_for_avail()
  ALSA: HDA: Cirrus - fix "Surround Speaker" volume control name
  ALSA: hda - Terminate the recursive connection search properly
  ASoC: Fix trivial build regression in Kirkwood I2S
  ASoC: Blackfin: bf5xx-ad193x: Fix codec device name
  ASoC: Fix reporting of partial jack updates
  ASoC: imx: Fix build warning of unused 'card' variable
  ASoC: Fix register cache sync register_writable WARN_ONs
  ASoC: snd_soc_codec_{readable,writable}_register change default to true
  ASoC: soc-dapm: Fix parameter comment for snd_soc_dapm_free
  MAINTAINERS: Add some missed Wolfson files
  ASoC: MPC5200: replace of_device with platform_device
      c455ea4f
  5. 15 Sep, 2011 28 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7