- 08 Oct, 2014 33 commits
-
-
Lee, Chun-Yi authored
commit 9389f46e upstream. The value64 parameter is an u64 point that used to transfer the value for write to CMOS, or used to return the value that's read from CMOS. The value64 is an u64 point, so don't need get address again. It causes acpi_cmos_rtc_space_handler always return 0 to reader and didn't write expected value to CMOS. Signed-off-by:
Lee, Chun-Yi <jlee@suse.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Daniel Vetter authored
commit 2232f031 upstream. In commit 1f83fee0 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Thu Nov 15 17:17:22 2012 +0100 drm/i915: clear up wedged transitions I've accidentally inverted the EIO/wedged handling in the fault handler: We want to return the EIO as a SIGBUS only if it's not because of the gpu having died, to prevent userspace from unduly dying. In my defence the comment right above is completely misleading, so fix both. v2: Drop the WARN_ON, it's not actually a bug to e.g. receive an -EIO when swap-in fails. v3: Don't remove too much ... oops. Reported-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> [ kamal: backport to 3.13-stable: context ] Signed-off-by:
-
Murali Karicheri authored
commit c5edfff9 upstream. Keystone K2E EVM uses Marvel 0x9182 controller. This requires support for the ID in the ahci driver. Signed-off-by:
Murali Karicheri <m-karicheri2@ti.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by:
-
Varun Sethi authored
commit 5a9137a6 upstream. iommu_group_get_for_dev determines the iommu group for the PCI device and adds the device to the group. In the PAMU driver we were again adding the device to the same group without checking if the device already had an iommu group. This resulted in the following warning. sysfs: cannot create duplicate filename '/devices/ffe200000.pcie/pci0000:00/0000:00:00.0/iommu_group' ------------[ cut here ]------------ WARNING: at fs/sysfs/dir.c:31 Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.17.0-rc3-00002-g7505ceaf-dirty #126 task: c0000001fe0a0000 ti: c0000001fe044000 task.ti: c0000001fe044000 NIP: c00000000018879c LR: c000000000188798 CTR: c00000000001ea50 REGS: c0000001fe047040 TRAP: 0700 Not tainted (3.17.0-rc3-00002-g7505ceaf-dirty) MSR: 0000000080029000 <CE,EE,ME> CR: 24ad8e22 XER: 20000000 SOFTE: 1 GPR00: c000000000188798 c0000001fe0472c0 c0000000009a52e0 0000000000000065 GPR04: 0000000000000001 0000000000000000 3a30303a00000000 0000000027000000 GPR08: 2f696f6d00000000 c0000000008d3830 c0000000009b3938 c0000000009bb3d0 GPR12: 0000000028ad8e24 c00000000fff4000 c00000000000205c 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 c0000000008a4c70 GPR24: c0000000007e9010 c0000001fe0140a8 ffffffffffffffef 0000000000000001 GPR28: c0000001fe22ebb8 c0000000007e9010 c00000000090bf10 c0000001fe220000 NIP [c00000000018879c] .sysfs_warn_dup+0x74/0xa4 LR [c000000000188798] .sysfs_warn_dup+0x70/0xa4 Call Trace: [c0000001fe0472c0] [c000000000188798] .sysfs_warn_dup+0x70/0xa4 (unreliable) [c0000001fe047350] [c000000000188d34] .sysfs_do_create_link_sd.clone.2+0x168/0x174 [c0000001fe047400] [c0000000004b3cf8] .iommu_group_add_device+0x78/0x244 [c0000001fe0474b0] [c0000000004b6964] .fsl_pamu_add_device+0x88/0x1a8 [c0000001fe047570] [c0000000004b3960] .iommu_bus_notifier+0xdc/0x15c [c0000001fe047600] [c000000000059848] .notifier_call_chain+0x8c/0xe8 [c0000001fe0476a0] [c000000000059d04] .__blocking_notifier_call_chain+0x58/0x84 [c0000001fe047750] [c00000000036619c] .device_add+0x464/0x5c8 [c0000001fe047820] [c000000000300ebc] .pci_device_add+0x14c/0x17c [c0000001fe0478c0] [c000000000300fbc] .pci_scan_single_device+0xd0/0xf4 [c0000001fe047970] [c00000000030104c] .pci_scan_slot+0x6c/0x18c [c0000001fe047a10] [c00000000030226c] .pci_scan_child_bus+0x40/0x114 [c0000001fe047ac0] [c000000000021974] .pcibios_scan_phb+0x240/0x2c8 [c0000001fe047b70] [c00000000085a970] .pcibios_init+0x64/0xc8 [c0000001fe047c00] [c000000000001884] .do_one_initcall+0xbc/0x224 [c0000001fe047d00] [c000000000852d50] .kernel_init_freeable+0x14c/0x21c [c0000001fe047db0] [c000000000002078] .kernel_init+0x1c/0xfa4 [c0000001fe047e30] [c000000000000884] .ret_from_kernel_thread+0x58/0xd4 Instruction dump: 7c7f1b79 4182001c 7fe4fb78 7f83e378 38a01000 4bffc905 60000000 7c641b78 e87e8008 7fa5eb78 48482ff5 60000000 <0fe00000> 7fe3fb78 4bf7bd39 60000000 Signed-off-by:
Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Felipe Balbi authored
commit 81a60b7f upstream. we don't to gate clocks until our children are done with their remove path. Fixes: af310e96 (usb: dwc3: omap: use runtime API's to enable clocks) Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Felipe Balbi authored
commit dc99f16f upstream. We can't suspend the PHYs before dwc3_core_exit_mode() has been called, that's because the host and/or device sides might still need to communicate with the far end link partner. Fixes: 8ba007a9 (usb: dwc3: core: enable the USB2 and USB3 phy in probe) Suggested-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Felipe Balbi authored
commit fed33afc upstream. Currently, we disable pm_runtime before all register accesses are done, this is dangerous and might lead to abort exceptions due to the driver trying to access a register which is clocked by a clock which was long gated. Fix that by moving pm_runtime_put_sync() and pm_runtime_disable() as the last thing we do before returning from our ->remove() method. Fixes: 72246da4 (usb: Introduce DesignWare USB3 DRD Driver) Signed-off-by:
-
Keith Busch authored
commit 2da78092 upstream. Releases the dev_t minor when all references are closed to prevent another device from acquiring the same major/minor. Since the partition's release may be invoked from call_rcu's soft-irq context, the ext_dev_idr's mutex had to be replaced with a spinlock so as not so sleep. Signed-off-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Sudeep Holla authored
commit 3d8afe30 upstream. The arm64 interrupt migration code on cpu offline calls irqchip.irq_set_affinity() with the argument force=true. Originally this argument had no effect because it was not used by any interrupt chip driver and there was no semantics defined. This changed with commit 01f8fa4f ("genirq: Allow forcing cpu affinity of interrupts") which made the force argument useful to route interrupts to not yet online cpus without checking the target cpu against the cpu online mask. The following commit ffde1de6 ("irqchip: gic: Support forced affinity setting") implemented this for the GIC interrupt controller. As a consequence the cpu offline irq migration fails if CPU0 is offlined, because CPU0 is still set in the affinity mask and the validation against cpu online mask is skipped to the force argument being true. The following first_cpu(mask) selection always selects CPU0 as the target. Commit 601c9421("arm64: use cpu_online_mask when using forced irq_set_affinity") intended to fix the above mentioned issue but introduced another issue where affinity can be migrated to a wrong CPU due to unconditional copy of cpu_online_mask. As with for arm, solve the issue by calling irq_set_affinity() with force=false from the CPU offline irq migration code so the GIC driver validates the affinity mask against CPU online mask and therefore removes CPU0 from the possible target candidates. Also revert the changes done in the commit 601c9421 as it's no longer needed. Tested on Juno platform. Fixes: 601c9421("arm64: use cpu_online_mask when using forced irq_set_affinity") Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Acked-by:
Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> [ kamal: backport to 3.13-stable: only need the irq_set_affinity(false) fix ] Signed-off-by:
-
Thierry Reding authored
commit 9ce9ec95 upstream. The PHY configuration is stored in an opaque "config" field, but when allocating the structure, its proper size needs to be known. In the case of UTMI, the proper structure is tegra_utmip_config of which a local variable already exists, so we can use that to obtain the size from. Fixes the following warning from the sparse checker: drivers/usb/phy/phy-tegra-usb.c:882:17: warning: expression using sizeof(void) Fixes: 81d5dfe6 (usb: phy: tegra: Read UTMIP parameters from device tree) Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Rasmus Villemoes authored
commit f0798d6a upstream. Clearly this was meant to be an include guard, but a trailing underscore was missing. It has been this way since the file was introduced in 0fe6f1d1 ("usb: udc: add Faraday fusb300 driver"). Fixes: 0fe6f1d1 ("usb: udc: add Faraday fusb300 driver") Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
-
Ross Lagerwall authored
commit 61a734d3 upstream. Always freeze processes when suspending and thaw processes when resuming to prevent a race noticeable with HVM guests. This prevents a deadlock where the khubd kthread (which is designed to be freezable) acquires a usb device lock and then tries to allocate memory which requires the disk which hasn't been resumed yet. Meanwhile, the xenwatch thread deadlocks waiting for the usb device lock. Freezing processes fixes this because the khubd thread is only thawed after the xenwatch thread finishes resuming all the devices. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Vladimir Murzin authored
commit 93b14135 upstream. If split page table lock for PTE tables is enabled (CONFIG_SPLIT_PTLOCK_CPUS <=NR_CPUS) pgtable_page_ctor() leads to non-atomic allocation for ptlock with a spinlock held, resulting in: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 466 at kernel/locking/lockdep.c:2742 lockdep_trace_alloc+0xd8/0xf4() DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags)) Modules linked in: CPU: 0 PID: 466 Comm: dma0chan0-copy0 Not tainted 3.16.0-3d47efb-clean-pl330-dma_test-ve-a15-a32-slr-m c-on-3+ #55 [<80014748>] (unwind_backtrace) from [<80011640>] (show_stack+0x10/0x14) [<80011640>] (show_stack) from [<802bf864>] (dump_stack+0x80/0xb4) [<802bf864>] (dump_stack) from [<8002385c>] (warn_slowpath_common+0x64/0x88) [<8002385c>] (warn_slowpath_common) from [<80023914>] (warn_slowpath_fmt+0x30/0x40) [<80023914>] (warn_slowpath_fmt) from [<8005d818>] (lockdep_trace_alloc+0xd8/0xf4) [<8005d818>] (lockdep_trace_alloc) from [<800d3d78>] (kmem_cache_alloc+0x24/0x144) [<800d3d78>] (kmem_cache_alloc) from [<800bfae4>] (ptlock_alloc+0x18/0x2c) [<800bfae4>] (ptlock_alloc) from [<802b1ec0>] (arm_smmu_handle_mapping+0x4c0/0x690) [<802b1ec0>] (arm_smmu_handle_mapping) from [<802b0cd8>] (iommu_map+0xe0/0x148) [<802b0cd8>] (iommu_map) from [<80019098>] (arm_coherent_iommu_map_page+0x160/0x278) [<80019098>] (arm_coherent_iommu_map_page) from [<801f4d78>] (dmatest_func+0x60c/0x1098) [<801f4d78>] (dmatest_func) from [<8003f8ac>] (kthread+0xcc/0xe8) [<8003f8ac>] (kthread) from [<8000e868>] (ret_from_fork+0x14/0x2c) ---[ end trace ce0d27e6f434acf8 ]-- Split page tables lock is not used in the driver. In fact, page tables are guarded with domain lock, so remove calls to pgtable_page_{c,d}tor(). Signed-off-by:
Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by:
-
Olav Haugan authored
commit 1fc870c7 upstream. Stage-1 context banks do not have the SMMU_CBn_TCR[SL0] field since it is only applicable to stage-2 context banks. This patch ensures that we don't set the reserved TCR bits for stage-1 translations. Signed-off-by:
Olav Haugan <ohaugan@codeaurora.org> Signed-off-by:
-
Bjørn Mork authored
commit 5b3da692 upstream. This VID:PID is used for some Direct IP devices behaving identical to the already supported 0F3D:68AA devices. Reported-by:
Lars Melin <larsm17@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Bjørn Mork authored
commit 049255f5 upstream. Sierra Wireless Direct IP devices using the 68A3 product ID can be configured for modes including a CDC ECM class function. The known example uses interface numbers 12 and 13 for the ECM control and data interfaces respectively, consistent with CDC MBIM function interface numbering on other Sierra devices. It seems cleaner to restrict this driver to the ff/ff/ff vendor specific interfaces rather than increasing the already long interface number blacklist. This should be more future proof if Sierra adds more class functions using interface numbers not yet in the blacklist. Signed-off-by:
-
Johan Hovold authored
commit ee444609 upstream. Add device id for NOVITUS Bono E thermal printer. Reported-by:
Emanuel Koczwara <poczta@emanuelkoczwara.pl> Signed-off-by:
-
Johan Hovold authored
commit 4df0ea41 upstream. Add back some PIDs that were mistakingly remove when reverting commit 73228a05 ("USB: option,zte_ev: move most ZTE CDMA devices to zte_ev"), which apparently did more than its commit message claimed in that it not only moved some PIDs from option to zte_ev but also added some new ones. Fixes: 63a901c0 ("Revert "USB: option,zte_ev: move most ZTE CDMA devices to zte_ev"") Reported-by:
Lei Liu <lei35151@163.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit f47f46d7 upstream. This reverts commit 43d826ca. This commit caused packet loss. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
James Ralston authored
commit 6cad1376 upstream. This patch adds the IDE mode SATA Device IDs for the Intel 9 Series PCH. Signed-off-by:
James Ralston <james.d.ralston@intel.com> Signed-off-by:
-
James Ralston authored
commit 1b071a09 upstream. This patch adds the AHCI mode SATA Device IDs for the Intel 9 Series PCH. Signed-off-by:
-
Johannes Berg authored
commit bb512ad0 upstream. This reverts commit 24aa11ab. That commit was wrong since it uses data that hasn't even been set up yet, but might be a hold-over from a previous connection. Additionally, it seems like a driver-specific workaround that shouldn't have been in mac80211 to start with. Fixes: 24aa11ab ("mac80211: disable uAPSD if all ACs are under ACM") Reviewed-by:
Luciano Coelho <luciano.coelho@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Pavel Shilovsky authored
commit 1bbe4997 upstream. The existing code uses the old MAX_NAME constant. This causes XFS test generic/013 to fail. Fix it by replacing MAX_NAME with PATH_MAX that SMB1 uses. Also remove an unused MAX_NAME constant definition. Signed-off-by:
Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Pavel Shilovsky authored
commit f736906a upstream. The existing code calls server->ops->close() that is not right. This causes XFS test generic/310 to fail. Fix this by using server->ops->closedir() function. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Larry Finger authored
commit c6651716 upstream. The Sitecom WLA-2102 adapter uses this driver. Reported-by:
Nico Baggus <nico-linux@noci.xs4all.nl> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Nico Baggus <nico-linux@noci.xs4all.nl> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Tony Lindgren authored
commit 85601b8d upstream. Commit 249751f2 ("usb: phy: twl4030-usb: poll for ID disconnect") added twl4030_id_workaround_work() to deal with lost interrupts after ID pin goes down. Looks like commit f1ddc24c ("usb: phy: twl4030-usb: remove *set_suspend* and *phy_init* ops") changed things around for the generic phy framework, and delayed work no longer got called except initially during boot. The PHY connect and disconnect interrupts for twl4030-usb are not working after disconnecting a USB-A cable from the board, and the deeper idle states for omap are blocked as the USB controller stays busy. The issue can be solved by calling delayed work from twl4030_usb_irq() when ID pin is down and the PHY is not asleep like we already do in twl4030_id_workaround_work(). But as both twl4030_usb_irq() and twl4030_id_workaround_work() already do pretty much the same thing, let's call twl4030_usb_irq() from twl4030_id_workaround_work() instead of adding some more duplicate code. We also must call sysfs_notify() only when we have an interrupt and not from the delayed work as notified by Grazvydas Ignotas <notasas@gmail.com>. Fixes: f1ddc24c ("usb: phy: twl4030-usb: remove *set_suspend* and *phy_init* ops") Acked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
Pavel Shilovsky authored
commit a07d3220 upstream. CIFS servers process nlink counts differently for files and directories. In cifs_rename() if we the request fails on the existing target, we try to remove it through cifs_unlink() but this is not what we want to do for directories. As the result the following sequence of commands mkdir {1,2}; mv -T 1 2; rmdir {1,2}; mkdir {1,2}; echo foo > 2/bar and XFS test generic/023 fail with -ENOENT error. That's why the second mkdir reuses the existing inode (target inode of the mv -T command) with S_DEAD flag. Fix this by checking whether the target is directory or not and calling cifs_rmdir() rather than cifs_unlink() for directories. Signed-off-by:
-
Miklos Szeredi authored
commit 44b1d530 upstream. Add d_is_dir(dentry) helper which is analogous to S_ISDIR(). To avoid confusion, rename d_is_directory() to d_can_lookup(). Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Reviewed-by:
J. Bruce Fields <bfields@redhat.com> [ kamal: 3.13-stable prereq for a9c8259 "CIFS: Fix directory rename error" ] Signed-off-by:
-
Alban Crequy authored
commit 71b1fb5c upstream. /proc/<pid>/cgroup contains one cgroup path on each line. If cgroup names are allowed to contain "\n", applications cannot parse /proc/<pid>/cgroup safely. Signed-off-by:
Alban Crequy <alban.crequy@collabora.co.uk> Signed-off-by:
-
Honggang Li authored
commit 3189eddb upstream. Currently, only SMP system free the percpu allocation info. Uniprocessor system should free it too. For example, one x86 UML virtual machine with 256MB memory, UML kernel wastes one page memory. Signed-off-by:
Honggang Li <enjoymindful@gmail.com> Signed-off-by:
-
Tejun Heo authored
commit 849f5169 upstream. If pcpu_map_pages() fails midway, it unmaps the already mapped pages. Currently, it doesn't flush tlb after the partial unmapping. This may be okay in most cases as the established mapping hasn't been used at that point but it can go wrong and when it goes wrong it'd be extremely difficult to track down. Flush tlb after the partial unmapping. Signed-off-by:
-
Tejun Heo authored
commit f0d27965 upstream. When pcpu_alloc_pages() fails midway, pcpu_free_pages() is invoked to free what has already been allocated. The invocation is across the whole requested range and pcpu_free_pages() will try to free all non-NULL pages; unfortunately, this is incorrect as pcpu_get_pages_and_bitmap(), unlike what its comment suggests, doesn't clear the pages array and thus the array may have entries from the previous invocations making the partial failure path free incorrect pages. Fix it by open-coding the partial freeing of the already allocated pages. Signed-off-by:
-
Eliad Peller authored
commit a5fe8e76 upstream. alpha2 is defined as 2-chars array, but is used in multiple places as string (e.g. with nla_put_string calls), which might leak kernel data. Solve it by simply adding an extra char for the NULL terminator, making such operations safe. Signed-off-by:
Eliad Peller <eliadx.peller@intel.com> Signed-off-by:
-
- 03 Oct, 2014 1 commit
-
-
Kamal Mostafa authored
Signed-off-by:
-
- 01 Oct, 2014 1 commit
-
-
Greg Kroah-Hartman authored
commit a9ef803d upstream. commit bdd405d2 ("usb: hub: Prevent hub autosuspend if usbcore.autosuspend is -1") causes a build error if CONFIG_PM_RUNTIME is disabled. Fix that by doing a simple #ifdef guard around it. Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reported-by:
kbuild test robot <fengguang.wu@intel.com> Cc: Roger Quadros <rogerq@ti.com> Cc: Michael Welling <mwelling@emacinc.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
- 30 Sep, 2014 5 commits
-
-
Jiri Kosina authored
commit 6726655d upstream. There is a following AB-BA dependency between cpu_hotplug.lock and cpuidle_lock: 1) cpu_hotplug.lock -> cpuidle_lock enable_nonboot_cpus() _cpu_up() cpu_hotplug_begin() LOCK(cpu_hotplug.lock) cpu_notify() ... acpi_processor_hotplug() cpuidle_pause_and_lock() LOCK(cpuidle_lock) 2) cpuidle_lock -> cpu_hotplug.lock acpi_os_execute_deferred() workqueue ... acpi_processor_cst_has_changed() cpuidle_pause_and_lock() LOCK(cpuidle_lock) get_online_cpus() LOCK(cpu_hotplug.lock) Fix this by reversing the order acpi_processor_cst_has_changed() does thigs -- let it first execute the protection against CPU hotplug by calling get_online_cpus() and obtain the cpuidle lock only after that (and perform the symmentric change when allowing CPUs hotplug again and dropping cpuidle lock). Spotted by lockdep. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
David Howells authored
commit 27419604 upstream. An edit script should be considered inaccessible by a function once it has called assoc_array_apply_edit() or assoc_array_cancel_edit(). However, assoc_array_gc() is accessing the edit script just after the gc_complete: label. Reported-by:
Andreea-Cristina Bernat <bernat.ada@gmail.com> Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
James Morris <james.l.morris@oracle.com> Signed-off-by:
-
Jeff Moyer authored
commit 2ff396be upstream. We ran into a case on ppc64 running mariadb where io_getevents would return zeroed out I/O events. After adding instrumentation, it became clear that there was some missing synchronization between reading the tail pointer and the events themselves. This small patch fixes the problem in testing. Thanks to Zach for helping to look into this, and suggesting the fix. Signed-off-by:
Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
Benjamin LaHaise <bcrl@kvack.org> Signed-off-by:
-
Marek Roszko authored
commit 75b81f33 upstream. The driver was not bound checking the received length byte to ensure it was within the the buffer size that is allocated for SMBus blocks. This resulted in buffer overflows whenever an invalid length byte was received. It also failed to ensure the length byte was not zero. If it received zero, it would end up in an infinite loop as the at91_twi_read_next_byte function returned immediately without allowing RHR to be read to clear the RXRDY interrupt. Tested agaisnt a SMBus compliant battery. Signed-off-by:
Marek Roszko <mark.roszko@gmail.com> Acked-by:
Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Simon Lindgren authored
commit 6721f28a upstream. There is a race condition in at91_do_twi_xfer when signals arrive. If a signal is recieved while waiting for a transfer to complete wait_for_completion_interruptible_timeout() will return -ERESTARTSYS. This is not handled correctly resulting in interrupts still being enabled and a transfer being in flight when we return. Symptoms include a range of oopses and bus lockups. Oopses can happen when the transfer completes because the interrupt handler will corrupt the stack. If a new transfer is started before the interrupt fires the controller will start a new transfer in the middle of the old one, resulting in confused slaves and a locked bus. To avoid this, use wait_for_completion_io_timeout instead so that we don't have to deal with gracefully shutting down the transfer and disabling the interrupts. Signed-off-by:
Simon Lindgren <simon@aqwary.com> Acked-by:
-
