- 10 Nov, 2017 13 commits
-
-
oulijun authored
The calculation of hem index are different between hns_roce_table_get and hns_roce_table_find. When the table chunk size of TRRL is not divisible by object size, it will faile to find the trrl table. This patch is to update the calculation of the hem index in the hns_roce_table_find to the same as which in the hns_roce_table_get. Signed-off-by:
Shaobo Xu <xushaobo2@huawei.com> Signed-off-by:
Lijun Ou <oulijun@huawei.com> Signed-off-by:
Doug Ledford <dledford@redhat.com>
-
oulijun authored
the owner need to be set when posting sqwqe in hip08 RoCE. The owner be used according to the below algorithm: The value of owner should be 1 in the first lap, it should be 0 in the second lap and in turn. Signed-off-by:
Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by:
Yixian Liu <liuyixian@huawei.com> Signed-off-by:
-
oulijun authored
In hip08 RoCE, it need to add the sq_invld_flg field in QP context for RoCE hardware. Signed-off-by:
-
oulijun authored
The ack timeout's value in qp context shall be a 5-bit value and be assgined by users. When at of qpc is set zero, the timer is disabled. When attr_mask set for IB_QP_TIMEOUT, The ack timeout field is effective. Signed-off-by:
-
oulijun authored
If the extend sges exist, the sq_cur_sge_blk_addr field in QPC (qp context) should be configured. Signed-off-by:
-
oulijun authored
When sig_type of qpc is non-selectable, all sq's wqes will produce cqe and not depend on the cqe attribute of wqe. When sig_type of qpc is selectable, The cqe attribute of wqe will decide whether to produce the cqe. Signed-off-by:
-
oulijun authored
When send flags is IB_SEND_SOLICITED, the se(solicated event) field of sqwqe will be set. Signed-off-by:
-
oulijun authored
When post wr for mixed rdma operation, we need to use fence mechanism to keep the correct execute order. Signed-off-by:
-
oulijun authored
The TRRL(Target RDMA Read/aTOMIC List) record the information of receiving RDMA READ or ATOMIC operation in hip08. It will be used the hardware. The driver need to assign a continuous physical address for trrl_ba field of qp context. Signed-off-by:
-
oulijun authored
The irrl(initiator RDMA Read/Atomic list) base address of qp context is assigned for addr[63:6]. This patch mainly fixed it. Signed-off-by:
-
Wei Hu(Xavier) authored
The hardware vendors need to generate RoCEv1 or RoCEv2 packet according to the sgid type configured. Besides, update the gid table size for hip08 RoCE device. Signed-off-by:
-
Wei Hu(Xavier) authored
HNS_ROCE_CAP_FALG_ROCE_V1_V2 is added for selecting capability of RoCE in hns driver. When HNS_ROCE_CAP_FALG_ROCE_V1_V2 is set, driver will inform ib core that the related hns device can support RoCEv2, and ib core can generate the gid of the related type. Signed-off-by:
-
Wei Hu(Xavier) authored
This patch adds rereg mr support for hip08. Signed-off-by:
-
- 01 Nov, 2017 1 commit
-
-
Doug Ledford authored
Pick up the missing netlink oops fix Signed-off-by:
-
- 30 Oct, 2017 7 commits
-
-
Mike Marciniszyn authored
The code that allocates the tx ring in the sdma code fails to take advantage of kvzalloc variations. Fix by converting to use kvzalloc_node. Reported-by:
Leon Romanovsky <leon@kernel.org> Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Kamenee Arumugam authored
The driver parameter num_user_contexts controls global behavior and should not be modified by the driver. This patch eliminates modification of num_user_contexts by using a local variable to keep track of the value. Reviewed-by:
Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Kamenee Arumugam <kamenee.arumugam@intel.com> Signed-off-by:
-
Mike Marciniszyn authored
The only use for the urg interrupt is for priority PSM packets. There is no reason for this interrupt to be enabled for kernel contexts. Reviewed-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
-
Mike Marciniszyn authored
This patch adds tx_opcode_stats to parallel the (rx)opcode_stats in the debugfs. Reviewed-by:
-
Sebastian Sanchez authored
These are the use-cases where the pkey needs to be tested to see if a packet needs to be dropped. a) Check if pkey is not FULL_MGMT_P_KEY or LIM_MGMT_P_KEY, drop the packet as it's not part of the management partition. Self-originated packets are an exception. b) If pkey index points to FULL_MGMT_P_KEY and LIM_MGMT_P_KEY is in the table, the packet is coming from a management node, and the receiving node is also a management node, so it is safe for the packet to go through. c) If pkey index points to FULL_MGMT_P_KEY and LIM_MGMT_P_KEY is NOT in the table, drop the packet as LIM_MGMT_P_KEY should always be in the pkey table. It could be a misconfiguration. d) If pkey index points to LIM_MGMT_P_KEY and FULL_MGMT_P_KEY is NOT in the table, it is safe for the packet to go through since a non-management node is talking to another non-managment node. e) If pkey index points to LIM_MGMT_P_KEY and FULL_MGMT_P_KEY is in the table, drop the packet because a non-management node is talking to a management node, and it could be an attack. For the implementation, these rules can be simplied to only checking for (a) and (e). There's no need to check for rule (b) as the packet doesn't need to be dropped. Rule (c) is not possible in the driver as LIM_MGMT_P_KEY is always in the pkey table. Reviewed-by:
Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by:
-
Patel Jay P authored
__subn_get_opa_portinfo stores value returned by hfi1_get_ib_cfg() as operational vls. hfi1_get_ib_cfg() returns vls_operational field in hfi1_pportdata. The problem with this is that the value is always equal to vls_supported field in hfi1_pportdata. The logic to calculate operational_vls is to set value passed by FM (in __subn_set_opa_portinfo routine). If no value is passed then default value is stored in operational_vls. Field actual_vls_operational is calculated on the basis of buffer control table. Hence, modifying hfi1_get_ib_cfg() to return actual_operational_vls when used with HFI1_IB_CFG_OP_VLS parameter Reviewed-by:
Patel Jay P <jay.p.patel@intel.com> Signed-off-by:
-
Michael J. Ruhl authored
The handler for link init state (HLS_UP_INIT) notifies userspace (update_statusp()) before enabling the device (RCV_CTRL_RCV_PORT_ENABLE_SMASK) or setting the device state (ppd->host_link_state). This causes a race condition where the userspace thinks the interface is in the INIT state before the driver has set that state. Rework the code path to eliminate the race. Delay setting the init state until after a HW settling period. Reviewed-by:
-
- 25 Oct, 2017 19 commits
-
-
Somnath Kotur authored
When host is shutting down, it invokes the shutdown hook of the L2 driver where it would attempt to free the MSI-X vectors, but would fail because some vectors are held by the RoCE driver. Implement the new hook in the L2 -> RoCE interface which will be invoked so that the RoCE driver can unregister the device and free up the MSI-X vectors it had claimed so that L2 can proceed with it's shutdown without failure. Signed-off-by:
Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by:
-
Leon Romanovsky authored
The scqe.stag is actually __b32, fix it. drivers/infiniband/hw/cxgb4/cq.c:754:52: warning: cast to restricted __be32 Cc: Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
-
Kees Cook authored
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Cc: Moni Shoua <monis@mellanox.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: linux-rdma@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Michael J. Ruhl authored
rdma_nl_rcv_msg() checks to see if it should use the .dump() callback or the .doit() callback. The check is done with this check: if (flags & NLM_F_DUMP) ... The NLM_F_DUMP flag is two bits (NLM_F_ROOT | NLM_F_MATCH). When an RDMA_NL_LS message (response) is received, the bit used for indicating an error is the same bit as NLM_F_ROOT. NLM_F_ROOT == (0x100) == RDMA_NL_LS_F_ERR. ibacm sends a response with the RDMA_NL_LS_F_ERR bit set if an error occurs in the service. The current code then misinterprets the NLM_F_DUMP bit and trys to call the .dump() callback. If the .dump() callback for the specified request is not available (which is true for the RDMA_NL_LS messages) the following Oops occurs: [ 4555.960256] BUG: unable to handle kernel NULL pointer dereference at (null) [ 4555.969046] IP: (null) [ 4555.972664] PGD 10543f1067 P4D 10543f1067 PUD 1033f93067 PMD 0 [ 4555.979287] Oops: 0010 [#1] SMP [ 4555.982809] Modules linked in: rpcrdma ib_isert iscsi_target_mod target_core_mod ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm dm_mirror dm_region_hash dm_log dm_mod dax sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel crypto_simd glue_helper cryptd hfi1 rdmavt iTCO_wdt iTCO_vendor_support ib_core mei_me lpc_ich pcspkr mei ioatdma sg shpchp i2c_i801 mfd_core wmi ipmi_si ipmi_devintf ipmi_msghandler acpi_power_meter acpi_pad nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables ext4 mbcache jbd2 sd_mod mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm igb ahci crc32c_intel ptp libahci pps_core drm dca libata i2c_algo_bit i2c_core [ 4556.061190] CPU: 54 PID: 9841 Comm: ibacm Tainted: G I 4.14.0-rc2+ #6 [ 4556.069667] Hardware name: Intel Corporation S2600WT2/S2600WT2, BIOS SE5C610.86B.01.01.0008.021120151325 02/11/2015 [ 4556.081339] task: ffff880855f42d00 task.stack: ffffc900246b4000 [ 4556.087967] RIP: 0010: (null) [ 4556.092166] RSP: 0018:ffffc900246b7bc8 EFLAGS: 00010246 [ 4556.098018] RAX: ffffffff81dbe9e0 RBX: ffff881058bb1000 RCX: 0000000000000000 [ 4556.105997] RDX: 0000000000001100 RSI: ffff881058bb1320 RDI: ffff881056362000 [ 4556.113984] RBP: ffffc900246b7bf8 R08: 0000000000000ec0 R09: 0000000000001100 [ 4556.121971] R10: ffff8810573a5000 R11: 0000000000000000 R12: ffff881056362000 [ 4556.129957] R13: 0000000000000ec0 R14: ffff881058bb1320 R15: 0000000000000ec0 [ 4556.137945] FS: 00007fe0ba5a38c0(0000) GS:ffff88105f080000(0000) knlGS:0000000000000000 [ 4556.147000] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4556.153433] CR2: 0000000000000000 CR3: 0000001056f5d003 CR4: 00000000001606e0 [ 4556.161419] Call Trace: [ 4556.164167] ? netlink_dump+0x12c/0x290 [ 4556.168468] __netlink_dump_start+0x186/0x1f0 [ 4556.173357] rdma_nl_rcv_msg+0x193/0x1b0 [ib_core] [ 4556.178724] rdma_nl_rcv+0xdc/0x130 [ib_core] [ 4556.183604] netlink_unicast+0x181/0x240 [ 4556.187998] netlink_sendmsg+0x2c2/0x3b0 [ 4556.192392] sock_sendmsg+0x38/0x50 [ 4556.196299] SYSC_sendto+0x102/0x190 [ 4556.200308] ? __audit_syscall_entry+0xaf/0x100 [ 4556.205387] ? syscall_trace_enter+0x1d0/0x2b0 [ 4556.210366] ? __audit_syscall_exit+0x209/0x290 [ 4556.215442] SyS_sendto+0xe/0x10 [ 4556.219060] do_syscall_64+0x67/0x1b0 [ 4556.223165] entry_SYSCALL64_slow_path+0x25/0x25 [ 4556.228328] RIP: 0033:0x7fe0b9db2a63 [ 4556.232333] RSP: 002b:00007ffc55edc260 EFLAGS: 00000293 ORIG_RAX: 000000000000002c [ 4556.240808] RAX: ffffffffffffffda RBX: 0000000000000010 RCX: 00007fe0b9db2a63 [ 4556.248796] RDX: 0000000000000010 RSI: 00007ffc55edc280 RDI: 000000000000000d [ 4556.256782] RBP: 00007ffc55edc670 R08: 00007ffc55edc270 R09: 000000000000000c [ 4556.265321] R10: 0000000000000000 R11: 0000000000000293 R12: 00007ffc55edc280 [ 4556.273846] R13: 000000000260b400 R14: 000000000000000d R15: 0000000000000001 [ 4556.282368] Code: Bad RIP value. [ 4556.286629] RIP: (null) RSP: ffffc900246b7bc8 [ 4556.293013] CR2: 0000000000000000 [ 4556.297292] ---[ end trace 8d67abcfd10ec209 ]--- [ 4556.305465] Kernel panic - not syncing: Fatal exception [ 4556.313786] Kernel Offset: disabled [ 4556.321563] ---[ end Kernel panic - not syncing: Fatal exception [ 4556.328960] ------------[ cut here ]------------ Special case RDMA_NL_LS response messages to call the appropriate callback. Additionally, make sure that the .dump() callback is not NULL before calling it. Fixes: 647c75ac ("RDMA/netlink: Convert LS to doit callback") Reviewed-by:
Alex Estrin <alex.estrin@intel.com> Signed-off-by:
Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by:
-
Parav Pandit authored
In recent code, two path record entries are alwasy cleared while allocated could be either one or two path record entries. This leads to zero out of unallocated memory. This fix initializes alternative path record only when alternative path is set. While we are at it, path record allocation doesn't check for OPA alternative path, but rest of the code checks for OPA alternative path. Path record allocation code doesn't check for OPA alternative LID. This can further lead to memory corruption when only one path record is allocated, but there is actually alternative OPA path record present in CM request. Cc: <stable@vger.kernel.org> # v4.12+ Fixes: 9fdca4da ("IB/SA: Split struct sa_path_rec based on IB and ROCE specific fields") Signed-off-by:
Parav Pandit <parav@mellanox.com> Reviewed-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
-
Maor Gottlieb authored
Some user space application would like to do RSS on the inner packet fields instead on the outer. When MLX5_RX_HASH_INNER is set with one or more of the other hash fields, then the RSS will be done using the inner packet. Signed-off-by:
Maor Gottlieb <maorg@mellanox.com> Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
-
Maor Gottlieb authored
The device can support receive Stateless Offloads for the inner packet's fields only when the packet is processed by TIR which is enabled to support tunneling. Otherwise, the device treats the packet as an ordinary non-tunneling packet and receive offloads can be done only for the outer packet's field. In order to enable receive Stateless Offloading support for incoming tunneling traffic the TIR should be created with tunneled_offload_en. Tunneling offloads is supported only be raw ethernet QP. This patch includes: * New QP creation flag for tunneling offloads. * Reports device capabilities. Signed-off-by:
-
Maor Gottlieb authored
This patch updates the mlx5_ifc with the following: - Fix tunnel_stateless_gre typo. - max_geneve_opt_len - Maximum geneve options length. - tunnel_stateless_geneve_rx - If set, receive Stateless Offloads for Geneve tunneled (inner) packets are supported. Signed-off-by:
-
Guy Levi authored
In some benchmarks and some CPU architectures, writing the CQE on a full cache line size improves performance by saving memory access operations (read-modify-write) relative to partial cache line change. This patch lets the user to configure the device to pad the CQE up to 128B in case its content is less than 128B. Currently the driver supports only padding for a CQE size of 128B. Signed-off-by:
Guy Levi <guyle@mellanox.com> Reviewed-by:
-
Guy Levi authored
In commit 1cbe6fc8 ("IB/mlx5: Add support for CQE compressing") the concept of CQE compression was introduced and added a support for 64B CQE size. This change update the code to support 128B CQE size as well. Signed-off-by:
-
Guy Levi authored
Adding new bits in mlx5_ifc_cmd_hca_cap to get the hardware capabilities for: - compression_128: Support 128B CQE compression - cqe_128_always: Support 128B CQE padding Signed-off-by:
-
Noa Osherovich authored
Allow creation of a multi-packet receive queue. In order to create a multi-packet RQ, the following fields in the mlx5_ib_rwq should be set: - log_num_strides: Log of number of strides per WQE - single_stride_log_num_of_bytes: Log of a single stride size - two_byte_shift_en: When enabled, hardware pads 2 bytes of zeros before writing the message to memory (e.g. for the IP alignment). Signed-off-by:
Noa Osherovich <noaos@mellanox.com> Reviewed-by:
Majd Dibbiny <majd@mellanox.com> Signed-off-by:
-
Noa Osherovich authored
This patch reports the device's striding RQ capabilities to the user-space: - min/max_single_stride_log_num_of_bytes: Log of min/max number of bytes in a single stride. - min/max_single_wqe_log_num_of_strides: Log of min/max number of strides in a single WQE. - supported_qpts: A bit mask to know which QP types support multi- packet RQ, for now only Raw Packet QPs. Signed-off-by:
-
oulijun authored
It is needed to call modify cq API for modifying cq context fields for controlling event generation moderations. This patch mainly adds it. Signed-off-by:
-
Wei Hu(Xavier) authored
This patch updates the PD specification to 16M for hip08. And it updates the numbers of mtt and cqe segments for the buddy. As the CQE supports hop num 1 addressing, the CQE specification is 64k. This patch updates to set the CQE specification to 64k. Signed-off-by:
-
Wei Hu(Xavier) authored
As the increase of the IRRL specification in hip08, the IRRL table chunk size needs to be updated. This patch updates the IRRL table chunk size to 256k for hip08. Signed-off-by:
-
Wei Hu(Xavier) authored
This patch updates to support WQE, CQE and PBL page size configurable feature, which includes base address page size and buffer page size. Signed-off-by:
-
Erez Shitrit authored
NAPI budget is 64 packets, while maximum polling size for the send CQ is 16. Let's bring them in sync, so the NAPI budget will be reused completely. Cc: Kamal Heib <kamalh@mellanox.com> Signed-off-by:
Erez Shitrit <erezsh@mellanox.com> Reviewed-by:
Alex Vesker <valex@mellanox.com> Signed-off-by:
-
Erez Shitrit authored
Instead of explicit call to poll_cq of the tx ring, use the NAPI mechanism to handle the completions of each packet that has been sent to the HW. The next major changes were taken: * The driver init completion function in the creation of the send CQ, that function triggers the napi scheduling. * The driver uses CQ for RX for both modes UD and CM, and CQ for TX for CM and UD. Cc: Kamal Heib <kamalh@mellanox.com> Signed-off-by:
-
