- 03 Jan, 2017 40 commits
-
-
Tobias Wolf authored
This patch adds fw_passed_dtb to arch/mips/ralink to support CONFIG_MIPS_RAW_APPENDED_DTB. Furthermore it adds a check that __dtb_start is not the same address as __dtb_end. Signed-off-by:
Tobias Wolf <dev-NTEO@vplace.de> Acked-by:
John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14662/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Yang Ling authored
The patch adds watchdog support for Loongson1 board. Signed-off-by:
Yang Ling <gnaygnil@gmail.com> Cc: keguang.zhang@gmail.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14644/Signed-off-by:
-
Yang Ling authored
Move the RTC-related macros to regs-rtc.h. Signed-off-by:
-
Paul Burton authored
The RESTORE_ALL_AND_RET macro is never used. Remove the dead code. Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14411/Signed-off-by:
-
Paul Burton authored
There's no reason for the pre-r6 instruction emulation code to be limited to uniprocessor kernels. We already emulate atomic memory access instructions in a way that works for SMP systems, and nothing else should be affected. Remove the artificial limitation, allowing pre-r6 instruction emulation to be used with SMP kernels. Signed-off-by:
-
Paul Burton authored
Commit 7c151d3d ("MIPS: Make use of the ERETNC instruction on MIPS R6") began clearing LLBit during context switches, but did so on all systems where it is writable for unclear reasons & did so from a macro with "software_ll_bit" in its name, which is intended to operate on the ll_bit variable used by ll/sc emulation for old CPUs. We do now need to clear LLBit on MIPSr6 systems where we'll use eretnc to return to userland, but we don't need to do so on MIPSr5 systems with a writable LLBit. Move the clear to its own appropriately named macro, do it only for MIPSr6 systems & comment about why. Signed-off-by:
-
Paul Burton authored
The r2_emul_return field in struct thread_info was used in order to take an alternate codepath when returning to userland, which (besides not implementing certain features) effectively used the eretnc instruction in place of eret. The difference is that eretnc doesn't clear LLBit, and therefore doesn't cause a linked load & store sequence to fail due to emulation like eret would. The reason eret would usually be used to clear LLBit is so that after context switching we ensure that a load performed by one task doesn't influence another task. However commit 7c151d3d ("MIPS: Make use of the ERETNC instruction on MIPS R6") which introduced the r2_emul_return field and conditional use of eretnc also for some reason began explicitly clearing LLBit during context switches - despite retaining the use of eret for everything but returns from the pre-r6 instruction emulation code. As LLBit is cleared upon context switches anyway, simplify this by using eretnc unconditionally for MIPSr6 kernels. This allows us to remove the 4 byte r2_emul_return boolean from struct thread_info, simplify the return to user code in entry.S and avoid the overhead of tracking & checking state which we don't need. Signed-off-by:
-
Rahul Bedarkar authored
Add support for Imagination Technologies' Marduk board which is based on Pistachio SoC. It is also known as Creator Ci40. Marduk is legacy name and will be there for decades. Documentation for this board can be found on https://docs.creatordev.io/ci40/ This patch adds initial support for board with following peripherals: * PWM based heartbeat LED * GPIO based buttons * SPI NOR flash on SPI1 * UART0 and UART1 * SD card * Ethernet * USB * PWM * ADC * I2C Signed-off-by:
Rahul Bedarkar <rahul.bedarkar@imgtec.com> Acked-by:
Rob Herring <robh@kernel.org> Acked-by:
James Hartley <james.hartley@imgtec.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14394/Signed-off-by:
-
Rahul Bedarkar authored
Add support for the base Device Tree for Imagination Technologies' Pistachio SoC. This commit supports the following peripherals: * Clocks * Pinctrl and GPIO * UART * SPI * I2C * PWM * ADC * Watchdog * Ethernet * MMC * DMA engine * Crypto * I2S * SPDIF * Internal DAC * Timer * USB * IR * Interrupt Controller Signed-off-by:
-
Paul Burton authored
On systems with CM3, we must ensure that the L1 & L2 ECC enables are set to the same value. This is presumed by the hardware & cache corruption can occur when it is not the case. Support enabling & disabling the L2 ECC checking on CM3 systems where this is controlled via a GCR, and ensure that it matches the state of L1 ECC checking. Remove I6400 from the switch statement it will no longer hit, and which was incorrect since the L2 ECC enable bit isn't in the CP0 ErrCtl register. Signed-off-by:
-
Leonid Yegoshin authored
MIPS instructions MULTU, MADDU and MSUBU emulation requires registers HI/LO to be converted to signed 32bits before 64bit sign extension on MIPS64. Bug was found on running MIPS32 R2 test application on MIPS64 R6 kernel. Fixes: b0a668fb ("MIPS: kernel: mips-r2-to-r6-emul: Add R2 emulator for MIPS R6") Signed-off-by:
Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Reported-by: Nikola.Veljkovic@imgtec.com Cc: paul.burton@imgtec.com Cc: yamada.masahiro@socionext.com Cc: akpm@linux-foundation.org Cc: andrea.gelmini@gelma.net Cc: macro@imgtec.com Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14043/Signed-off-by:
-
Kelvin Cheung authored
This patch changes DEFAULT_MEMSIZE to 64MB which is the memory size of latest EVB. Signed-off-by:
Kelvin Cheung <keguang.zhang@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13856/Signed-off-by:
-
Kelvin Cheung authored
This patch removes ARCH_WANT_OPTIONAL_GPIOLIB due to upstream changes. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Yang Ling <gnaygnil@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13855/Signed-off-by:
-
Florian Fainelli authored
While we properly disabled the per-CPU timer interrupt, we also need to make sure that all interrupts that can possibly have this CPU in their smp_affinity mask also have a chance to see this interrupt migrated to a CPU not being taken offline. [ralf@linux-mips.org: Fix merge conflict.] Fixes: 230b6ff5 ("MIPS: BMIPS: Mask off timer IRQs when hot-unplugging a CPU") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Cc: cernekee@gmail.com Cc: jaedon.shin@gmail.com Cc: justinpopo6@gmail.com Cc: tglx@linutronix.de Cc: marc.zyngier@arm.com Cc: jason@lakedaemon.net Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14488/Signed-off-by:
-
Zubair Lutfullah Kakakhel authored
Update defconfig to enable emaclite, i2c and temp sensor on the xilfpga platform Signed-off-by:
Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14595/Signed-off-by:
-
Zubair Lutfullah Kakakhel authored
The xilfpga platform has a Xilinx AXI emaclite block. Add the DT node to use it. Signed-off-by:
-
Zubair Lutfullah Kakakhel authored
The xilfpga platform has an AXI I2C Bus master with a temperature sensor connected to it. Add the device tree node to use them. Signed-off-by:
-
Zubair Lutfullah Kakakhel authored
Update the DT node with the UART irq Signed-off-by:
-
Zubair Lutfullah Kakakhel authored
IRQs from peripherals such as i2c/uart/ethernet come via the AXI Interrupt controller. Select it in Kconfig for xilfpga and add the DT node Signed-off-by:
-
Zubair Lutfullah Kakakhel authored
This prepares the code to use the Xilinx Interrupt Controller driver in drivers/irqchip/irq-xilinx-intc.c Signed-off-by:
-
Christophe JAILLET authored
'clk_register_fixed_rate()' returns an error pointer in case of error, not NULL. So test it with IS_ERR. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by:
Aban Bedel <albeu@free.fr> Cc: antonynpavlov@gmail.com Cc: hackpascal@gmail.com Cc: amitoj1606@gmail.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: kernel-janitors@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14464/Signed-off-by:
-
Matt Redfearn authored
If there is no online CPU within a core which could receive the IPI to start another VP in that core, a BUG() is triggered. Instead print a warning and gracefully handle the failure such that the system remains usable, albeit without the requested secondary CPU. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Qais Yousef <qsyousef@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14504/Signed-off-by:
-
Matt Redfearn authored
The previous commit made cpu_callin_map redundant, since it is no longer used to signal secondary CPUs starting, or going offline. Remove it now. Signed-off-by:
-
Matt Redfearn authored
If a secondary CPU failed to start, for any reason, the CPU requesting the secondary to start would get stuck in the loop waiting for the secondary to be present in the cpu_callin_map. Rather than that, use a completion event to signal that the secondary CPU has started and is waiting to synchronise counters. Since the CPU presence will no longer be marked in cpu_callin_map, remove the redundant test from arch_cpu_idle_dead(). Signed-off-by:
-
Paul Burton authored
Code in arch/mips/netlogic/common/irq.c which handles the XLP PIC fails to build in XLR configurations due to cpu_is_xlp9xx not being defined, leading to the following build failure: arch/mips/netlogic/common/irq.c: In function ‘xlp_of_pic_init’: arch/mips/netlogic/common/irq.c:298:2: error: implicit declaration of function ‘cpu_is_xlp9xx’ [-Werror=implicit-function-declaration] if (cpu_is_xlp9xx()) { ^ Although the code was conditional upon CONFIG_OF which is indirectly selected by CONFIG_NLM_XLP_BOARD but not CONFIG_NLM_XLR_BOARD, the failing XLR with CONFIG_OF configuration can be configured manually or by randconfig. Fix the build failure by making the affected XLP PIC code conditional upon CONFIG_CPU_XLP which is used to guard the inclusion of asm/netlogic/xlp-hal/xlp.h that provides the required cpu_is_xlp9xx function. [ralf@linux-mips.org: Fixed up as per Jayachandran's suggestion.] Signed-off-by: -
Paul Burton authored
We have a HIGHMEM_DEBUG macro defined in asm/highmem.h with a comment stating that it should be removed for production, and no users... Kill it. Signed-off-by:
-
Matt Redfearn authored
When relocatable support for MIPS was merged, there was no support for an architecture to add a postlink step for vmlinux. This meant that only invoking a target within the boot directory, such as uImage, caused the relocations to be inserted into vmlinux. Building just the vmlinux target would result in a relocatable kernel with no relocation information present. Commit fbe6e37d ("kbuild: add arch specific post-link Makefile") recified this situation, so MIPS can now define a postlink step to add relocation information into vmlinux, and remove the additional steps tacked onto boot targets. Signed-off-by:
Steven J. Hill <steven.hill@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14554/Signed-off-by:
-
Paul Burton authored
is_jump_ins() checks for plain jump ("j") instructions since commit e7438c4b ("MIPS: Fix sibling call handling in get_frame_info") but that commit didn't make the same change to the microMIPS code, leaving it inconsistent with the MIPS32/MIPS64 code. Handle the microMIPS encoding of the jump instruction too such that it behaves consistently. Signed-off-by: -
Paul Burton authored
get_frame_info() calculates the offset of the return address within a stack frame simply by dividing a the bottom 16 bits of the instruction, treated as a signed integer, by the size of a long. Whilst this works for MIPS32 & MIPS64 ISAs where the sw or sd instructions are used, it's incorrect for microMIPS where encodings differ. The result is that we typically completely fail to unwind the stack on microMIPS. Fix this by adjusting is_ra_save_ins() to calculate the return address offset, and take into account the various different encodings there in the same place as we consider whether an instruction is storing the ra/$31 register. With this we are now able to unwind the stack for kernels targetting the microMIPS ISA, for example we can produce: Call Trace: [<80109e1f>] show_stack+0x63/0x7c [<8011ea17>] __warn+0x9b/0xac [<8011ea45>] warn_slowpath_fmt+0x1d/0x20 [<8013fe53>] register_console+0x43/0x314 [<8067c58d>] of_setup_earlycon+0x1dd/0x1ec [<8067f63f>] early_init_dt_scan_chosen_stdout+0xe7/0xf8 [<8066c115>] do_early_param+0x75/0xac [<801302f9>] parse_args+0x1dd/0x308 [<8066c459>] parse_early_options+0x25/0x28 [<8066c48b>] parse_early_param+0x2f/0x38 [<8066e8cf>] setup_arch+0x113/0x488 [<8066c4f3>] start_kernel+0x57/0x328 ---[ end trace 0000000000000000 ]--- Whereas previously we only produced: Call Trace: [<80109e1f>] show_stack+0x63/0x7c ---[ end trace 0000000000000000 ]--- Signed-off-by: -
Paul Burton authored
is_jump_ins() checks 16b instruction fields without verifying that the instruction is indeed 16b, as is done by is_ra_save_ins() & is_sp_move_ins(). Add the appropriate check. Signed-off-by:
-
Paul Burton authored
get_frame_info() is meant to iterate over up to the first 128 instructions within a function, but for microMIPS kernels it will not reach that many instructions unless the function is 512 bytes long since we calculate the maximum number of instructions to check by dividing the function length by the 4 byte size of a union mips_instruction. In microMIPS kernels this won't do since instructions are variable length. Fix this by instead checking whether the pointer to the current instruction has reached the end of the function, and use max_insns as a simple constant to check the number of iterations against. Signed-off-by:
-
Paul Burton authored
During stack unwinding we call a number of functions to determine what type of instruction we're looking at. The union mips_instruction pointer provided to them may be pointing at a 2 byte, but not 4 byte, aligned address & we thus cannot directly access the 4 byte wide members of the union mips_instruction. To avoid this is_ra_save_ins() copies the required half-words of the microMIPS instruction to a correctly aligned union mips_instruction on the stack, which it can then access safely. The is_jump_ins() & is_sp_move_ins() functions do not correctly perform this temporary copy, and instead attempt to directly dereference 4 byte fields which may be misaligned and lead to an address exception. Fix this by copying the instruction halfwords to a temporary union mips_instruction in get_frame_info() such that we can provide a 4 byte aligned union mips_instruction to the is_*_ins() functions and they do not need to deal with misalignment themselves. Signed-off-by:
-
Paul Burton authored
get_frame_info() can be called in microMIPS kernels with the ISA bit already clear. For example this happens when unwind_stack_by_address() is called because we begin with a PC that has the ISA bit set & subtract the (odd) offset from the preceding symbol (which does not have the ISA bit set). Since get_frame_info() unconditionally subtracts 1 from the PC in microMIPS kernels it incorrectly misaligns the address it then attempts to access code at, leading to an address error exception. Fix this by using msk_isa16_mode() to clear the ISA bit, which allows get_frame_info() to function regardless of whether it is provided with a PC that has the ISA bit set or not. Signed-off-by:
-
Paul Burton authored
The MIPS-specific asm/unaligned.h provides nothing that the generic version doesn't - it simply uses MIPS-specific endianness macros in place of generic ones & lacks support for CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS. Remove it & switch to using the generic version to remove duplication. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14412/Signed-off-by:
-
Paul Burton authored
When clearing the .bss section in kernel_entry we do so using LONG_S instructions, and branch whilst the current write address doesn't equal the end of the .bss section minus the size of a long integer. The .bss section always begins at a long-aligned address and we always increment the write pointer by the size of a long integer - we therefore rely upon the .bss section ending at a long-aligned address. If this is not the case then the long-aligned write address can never be equal to the non-long-aligned end address & we will continue to increment past the end of the .bss section, attempting to zero the rest of memory. Despite this requirement that .bss end at a long-aligned address we pass 0 as the end alignment requirement to the BSS_SECTION macro and thus don't guarantee any particular alignment, allowing us to hit the error condition described above. Fix this by instead passing 8 bytes as the end alignment argument to the BSS_SECTION macro, ensuring that the end of the .bss section is always at least long-aligned. Signed-off-by:
-
Steven J. Hill authored
This hook provides the platform the chance to perform any required setup before the boot processor switches to the relocated kernel. The relocated kernel has been copied and fixed up ready for execution at this point. Secondary CPUs may wish to switch to it early. There is also the opportunity for the platform to abort jumping to the relocated kernel if there is anything wrong with the chosen offset. Signed-off-by:
-
Steven J. Hill authored
This patch enables KASLR for Octeon systems. The SMP startup code is such that the secondaries monitor the volatile variable 'octeon_processor_relocated_kernel_entry' for any non-zero value. The 'plat_post_relocation hook' is used to set that value to the kernel entry point of the relocated kernel. The secondary CPUs will then jusmp to the new kernel, perform their initialization again and begin waiting for the boot CPU to start them via the relocated loop 'octeon_spin_wait_boot'. Inspired by Steven's code from Cavium. Signed-off-by:
David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14669/Signed-off-by:
-
Steven J. Hill authored
Add in the function needed for Octeon platforms to support KASLR. Signed-off-by:
-
Steven J. Hill authored
Add platform-specific kernel command line processing for Octeon. Signed-off-by:
-
Matt Redfearn authored
Since do_IRQ is now invoked on a separate IRQ stack, we select HAVE_IRQ_EXIT_ON_IRQ_STACK so that softirq's may be invoked directly from irq_exit(), rather than requiring do_softirq_own_stack. Signed-off-by:
Jason A. Donenfeld <jason@zx2c4.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14744/Signed-off-by:
-
