Saeed Mahameed says:

====================
mlx5-updates-2021-03-24

mlx5e netdev driver updates:

1) Some cleanups from Colin, Tariq and Saeed.

2) Aya made some trivial refactoring to cleanup and generalize
 PTP and RQ (Receive Queue) creation and management.
 Mostly code decoupling and reducing dependencies between the different
 RX objects in the netdev driver.

 This is a preparation series for upcoming PTP special RQ creation which
 will allow coexistence of CQE compression (important performance feature,
 especially in Multihost systems) and HW TS PTP.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

There are two spelling mistakes in a mlx5_core_info message. Fix them.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Reduce scope of mlx5e_ptp_params, move to its c file. Remove unneeded
variables from mlx5e_ptp_open and state bitmap from PTP channel. In
addition, remove channel index from PTP channel since it is set to a
hard coded value, use define instead.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Following patches in the set add support for RX PTP. Rename PTP prefix
from %s/port_ptp/ptp/g to include RX PTP too.

In addition rename indication (used in statistics context) that PTP-SQ
was opened: %s/port_ptp_opened/tx_ptp_opened/g. This will simplify adding
indication that PTP-RQ was opened.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Add input parameter indicating the size of direct-TIRs/direct-RQTs array
to be created/destroyed. This allows next patches in the patch-set to
handle a single direct-TIR pointing to a direct-RQT with a single entry.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Allow different flavours of RQ to use the same close flow. Add validity
checks to support different RQ types which not necessarily initialize
all the RQ's functionality.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Support RQ activation for RQs without an ICOSQ in the main flow, like
existing trap-RQ and like PTP-RQ that will be introduced in the coming
patches in the patchset.
With this patch, remove the wrapper in traps to deactivate the trap-RQ.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Unify RQ creation for different RQ types. For each RQ type add a
separate open helper which initializes the RQ specific values and
trigger a call for generic open RQ function. Avoid passing the
mlx5e_channel pointer to the generic open RQ as a container, since the
RQ may reside under a different type of channel.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Translation method on the time-stamp is set by the capabilities. Avoid
code duplication by using a helper to set ptp_cyc2time callback on a
queue.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Change the signature of mlx5e_rq_alloc_mpwqe_info from receiving channel
pointer to receive the NUMA node. This allows creating mpwqe_info in
context of different channels types.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Do not use generic struct mlx5e_priv as a parameter to param
functions, as it is too generic. All calculations of the channel's
param should be mainly based on struct mlx5_core_dev and
struct mlx5e_params. Additional info can be explicitly passed.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Take params logic out of en_main.c, into the dedicated params.c.
Some functions are now hidden and become static.
No functional change here.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Pass q_counter idintifier, instead of reading it from mlx5e_priv
parameter.
This is a step towards removing the mlx5e_priv parameter from all
params function and logic in the next patches of the series.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The cited patch allocated the wrong size for the indirection_rqt table,
fix that.

Fixes: 2119bda6 ("net/mlx5e: allocate 'indirection_rqt' buffer dynamically")
CC: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

... cannot be used in block quote, it breaks compilation, remove it.

Fix warnings due to missing blank line such as:

net-next/Documentation/networking/nf_flowtable.rst:142: WARNING: Block quote ends without a blank line; unexpected unindent.

Fixes: 143490cd ("docs: nf_flowtable: update documentation with enhancements")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
net: use less storage for most sysctl

This patch series adds a new sysctl type, to allow using u8 instead of
"int" or "long int" types.

Then we convert mosts sysctls found in struct netns_ipv4
to shrink it by three cache lines.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Many tcp sysctls are either bools or small ints that can fit into u8.

Reducing space taken by sysctls can save few cache line misses
when sending/receiving data while cpu caches are empty,
for example after cpu idle period.

This is hard to measure with typical network performance tests,
but after this patch, struct netns_ipv4 has shrunk
by three cache lines.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For these sysctls, their dedicated helpers have
to use proc_dou8vec_minmax().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This sysctl uses ip_fwd_update_priority() helper,
so the conversion needs to change it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These sysctls that can fit in one byte instead of one int
are converted to save space and thus reduce cache line misses.

 - icmp_echo_ignore_all, icmp_echo_ignore_broadcasts,
 - icmp_ignore_bogus_error_responses, icmp_errors_use_inbound_ifaddr
 - tcp_ecn, tcp_ecn_fallback
 - ip_default_ttl, ip_no_pmtu_disc, ip_fwd_use_pmtu
 - ip_nonlocal_bind, ip_autobind_reuse
 - ip_dynaddr, ip_early_demux, raw_l3mdev_accept
 - nexthop_compat_mode, fwmark_reflect
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Networking has many sysctls that could fit in one u8.

This patch adds proc_dou8vec_minmax() for this purpose.

Note that the .extra1 and .extra2 fields are pointing
to integers, because it makes conversions easier.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Voon Weifeng says:

====================
net: stmmac: enable multi-vector MSI

This patchset adds support for multi MSI interrupts in addition to
current single common interrupt implementation. Each MSI interrupt is tied
to a newly introduce interrupt service routine(ISR). Hence, each interrupt
will only go through the corresponding ISR.

In order to increase the efficiency, enabling multi MSI interrupt will
automatically select the interrupt mode configuration INTM=1. When INTM=1,
the TX/RX transfer complete signal will only asserted on corresponding
sbd_perch_tx_intr_o[] or sbd_perch_rx_intr_o[] without asserting signal
on the common sbd_intr_o. Hence, for each TX/RX interrupts, only the
corresponding ISR will be triggered.

Every vendor might have different MSI vector assignment. So, this patchset
only includes multi-vector MSI assignment for Intel platform.

Changes:
v1 -> v2
 patch 2/5
 -Remove defensive check for invalid dev pointer
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

For interrupt mode INTM=0, TX/RX transfer complete will trigger signal
not only on sbd_perch_[tx|rx]_intr_o (Transmit/Receive Per Channel) but
also on the sbd_intr_o (Common).

As for multi-MSI implementation, setting interrupt mode INTM=1 is more
efficient as each TX intr and RX intr (TI/RI) will be handled by TX/RX ISR
without the need of calling the common MAC ISR.

Updated the TX/RX NORMAL interrupts status checking process as the
NIS status bit is not asserted for any RI/TI events for INTM=1.
Signed-off-by: Wong, Vee Khee <vee.khee.wong@intel.com>
Co-developed-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Intel mgbe controller supports multi-vector interrupts:
msi_rx_vec	0,2,4,6,8,10,12,14
msi_tx_vec	1,3,5,7,9,11,13,15
msi_sfty_ue_vec	26
msi_sfty_ce_vec	27
msi_lpi_vec	28
msi_mac_vec	29

During probe(), the driver will starts with request allocation for
multi-vector interrupts. If it fails, then it will automatically fallback
to request allocation for single interrupts.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Co-developed-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now we introduce MSI interrupt service routines and hook these routines
up if stmmac_open() sees valid irq line being requested:-

stmmac_mac_interrupt()    :- MAC (dev->irq), WOL (wol_irq), LPI (lpi_irq)
stmmac_safety_interrupt() :- Safety Feat Correctible Error (sfty_ce_irq)
                             & Uncorrectible Error (sfty_ue_irq)
stmmac_msi_intr_rx()      :- For all RX MSI irq (rx_irq)
stmmac_msi_intr_tx()      :- For all TX MSI irq (tx_irq)

Each of IRQs will have its unique name so that we can differentiate
them easily under /proc/interrupts.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Refactor stmmac_interrupt() by introducing stmmac_common_interrupt()
so that we prepare the ISR operation to be friendly to MSI later.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation to make stmmac support multi-vector MSI, we introduce the
interrupt status masking according to RX, TX or RXTX. Default to use RXTX
inside stmmac_dma_interrupt(), so there is no run-time logic difference
now.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netdev_unregister_timeout_secs=0 can lead to printing the
"waiting for dev to become free" message every jiffy.
This is too frequent and unnecessary.
Set the min value to 1 second.

Also fix the merge issue introduced by
"net: make unregister netdev warning timeout configurable":
it changed "refcnt != 1" to "refcnt".
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes: 5aa3afe1 ("net: make unregister netdev warning timeout configurable")
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alex Elder says:

====================
net: ipa: update registers for other versions

This series updates IPA and GSI register definitions to permit more
versions of IPA hardware to be supported.  Most of the updates are
informational, updating comments to indicate which IPA versions
support each register and field.  But some registers are new and
others are deprecated.  In a few cases register fields are laid
out differently, and in these cases the changes are a little more
substantive.

I won't claim the result is 100% correct, but it's close, and should
allow all IPA versions 3.x through 4.x to be supported by the driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

IPA v4.5 (GSI v2.5) supports a larger set of channel protocols, and
adds an additional field to hold the most-significant bits of the
protocol identifier on a channel.

Add an inline function that encodes the protocol (including the
extra bits for newer versions of IPA), and define some additional
protocols.  At this point we still use only GPI protocol.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Each GSI channel has a CNTXT_1 register that encodes the size of its
ring buffer.  The size of the field that records that is increased
starting at IPA v4.9.  Replace the use of a fixed-size field mask
with a new inline function that encodes that size value.

Similarly, the size of GSI event rings can be larger starting with
IPA v4.9, so create a function to encode that as well.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The main purpose of this is to extend these GSI register definitions
to support additional IPA versions.

This patch makes some minor updates to "gsi_reg.h":
  - Define a DB_IN_BYTES field in the channel QOS register
  - Add some comments clarifying when certain fields are valid
  - Add the definition of GSI_CH_DB_STOP channel command
  - Add a couple of blank lines
  - Move one comment and indent another
  - Delete two unused register definitions at the end.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Starting with IPA v4.7, registers related to IPA interrupts are
located at a fixed offset 0x1000 above than the addresses used for
earlier versions.  Define and use functions to provide the offset to
use for these registers based on IPA version.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPA version 4.9 and later use a different layout of some fields
found in the COMP_CFG register.

Define arbitration_lock_disable_encoded(), and use it to encode a
value into the ATOMIC_FETCHER_ARB_LOCK_DIS field based on the IPA
version.

And define full_flush_rsc_closure_en_encoded() to encode a value
into the FULL_FLUSH_WAIT_RSC_CLOSE_EN field based on the IPA
version.

The values of these fields are neither modified nor extracted by
current code, but this patch makes this possible for all supported
versions.

Fix a mistaken comment above ipa_hardware_config_comp() intended to
describe the purpose for the register.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add and update IPA register definitions.  Extend these definitions
to incorporate a fairly small number of new symbols (register
offsets and fields) to support IPA v3.0, v3.1, v3.5, v4.0, v4.1,
v4.7, 4.9, and v4.11, and have the comments reflect when they are
valid.  None of the added symbols require changes elsewhere in the
code.

Update rsrc_grp_encoded() to support these other IPA versions.

Add kerneldoc comments for the IPA IRQ numbers and sequencer type.

Fix a few spots where the version check should be less restrictive
(missed by an earlier patch).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

GCC reports the following warning with W=1:

drivers/net/ethernet/mediatek/mtk_ppe_debugfs.c:80:9: warning:
 variable 'count' set but not used [-Wunused-but-set-variable]
   80 |  int i, count;
      |         ^~~~~

This variable is not used in function , this commit
remove it to fix the warning.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can simply use rtl_hw_start_8168c_2() also for chip version 21.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daode Huang says:

====================
net: gve: make cleanup for gve

This patch set replace deprecated strlcpy by strscpy, remove
repeat word "allowed" in gve driver.
for more details, please refer to each patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

fix the WARNING of Possible repeated word: 'allowed'
Signed-off-by: Daode Huang <huangdaode@huawei.com>
Reviewed-by: Catherine Sullivan <csully@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>