Add pinctrl data for ExynosAuto v9 SoC.

- GPA0, GPA1: 10, External wake up interrupt
- GPQ0: 2, XbootLDO, Speedy PMIC I/F
- GPB0, GPB1, GPB2, GPB3: 29, I2S 7 CH
- GPF0, GPF1, GPF2, GPF3,GPF4, GPF5, GPF6, GPF8: 52, FSYS
- GPG0, GPG1, GPG2, GPG3: 25, GPIO x 24, SMPL_INT
- GPP0, GPP1, GPP2, GPP3, GPP4, GPP5: 48, USI 12 CH
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Link: https://lore.kernel.org/r/20211008091443.44625-2-chanho61.park@samsung.comSigned-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211017171912.5044-1-krzysztof.kozlowski@canonical.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Convert rockchip,pinctrl.txt to YAML
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20211007144019.7461-1-jbx6244@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'renesas-pinctrl-for-v5.16-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel

pinctrl: renesas: Updates for v5.16 (take two)

  - Add MediaLB pins on R-Car H3, M3-W/W+, and M3-N.
  - Miscellaneous fixes and improvements.

Add a "sh_pfc: " prefix to common checker output that is not yet
prefixed by a subdriver-specific prefix ("<SoC-part-number>_pfc: "), for
easier grepping.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/9cf1dc9f895dc5fa74125dabddfe46fecf438b4f.1633615652.git.geert+renesas@glider.be

If some bits in a pin Pull-Up control register (PUPR) control pin
pull-down instead of pin pull-up, there are two pinmux_bias_reg entries:
a first one with the puen field filled in, listing pins with pull-up
functionality, and a second one with the pud field filled in, listing
pins with pull-down functionality.  On encountering the second entry,
where puen is NULL, the for-loop terminates early, causing the remaining
bias registers not to be checked.  In addition, sh_pfc_check_bias_reg()
does not handle such entries.

Fix this by treating pinmux_bias_reg.puen and pinmux_bias_reg.pud the
same.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/29526d06fa223cffd785cdb264b756a202b11cea.1633615652.git.geert+renesas@glider.be

Move the check for overlapping drive register fields from
sh_pfc_check_drive_reg() to sh_pfc_check_reg(), so it can be used for
other register types, too.  This requires passing the covered register
bits to sh_pfc_check_reg().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/9d75057200890bbf31e226ffcc4514ecc5bc2c34.1633615652.git.geert+renesas@glider.be

The GENMASK(h, l) macro creates a contiguous bitmask starting at bit
position @l and ending at position @h, inclusive.

This did not trigger any error checks, as the individual register fields
cover at most 3 of the 4 available bits.

Fixes: 08df16e0 ("pinctrl: sh-pfc: checker: Add drive strength register checks")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/8f82d6147fbe3367d4c83962480e97f58d9c96a2.1633615652.git.geert+renesas@glider.be

If some bits in a pin Pull-Up control register (PUPR) control pin
pull-down instead of pin pull-up, there are two pinmux_bias_reg entries:
a first one with the puen field filled in, listing pins with pull-up
functionality, and a second one with the pud field filled in, listing
pins with pull-down functionality.  On encountering the second entry,
where puen is NULL, the for-loop terminates early, causing the remaining
bias registers not to be saved/restored during PSCI system suspend.
Fortunately this does not trigger on any supported system yet, as PSCI
is only used on R-Car Gen3 and RZ/G2 systems, which all have separate
pin Pull-Enable (PUEN) and pin Pull-Up/Down control (PUD) registers.

Avoid this ever becoming a problem by treating pinmux_bias_reg.puen and
pinmux_bias_reg.pud the same.  Note that a register controlling both
pull-up and pull-down pins would be saved and restored twice, which is
harmless.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/59d2fbddff685b6a7a82ff17d2b37633e30e8860.1633615652.git.geert+renesas@glider.be

This adds pins, groups, and functions for MediaLB devices on Renesas
R-Car H3 and M3-W/N SoCs.
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com>
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Link: https://lore.kernel.org/r/20211007200250.20661-1-nikita.yoush@cogentembedded.com
[geert: Fix automotive handling]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Signed-off-by: Du Huanpeng <dhu@hodcarrier.org>
Link: https://lore.kernel.org/r/1633879405-11658-1-git-send-email-dhu@hodcarrier.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Since the 'st,package' property is optional, outputting the "No package
detected" warning-level log when the property is absent is unsuitable.
Remove that log.
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Link: https://lore.kernel.org/r/20211008122454.617556-1-fabien.dessenne@foss.st.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add pin configuration and pinmux support for UniPhier NX1 SoC.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1633518606-8298-4-git-send-email-hayashi.kunihiko@socionext.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Update pinctrl binding document for UniPhier NX1 SoC.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1633518606-8298-3-git-send-email-hayashi.kunihiko@socionext.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add extra audio I/O pinmux setting for LD11, LD20 and PXs3 SoCs.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/1633518606-8298-2-git-send-email-hayashi.kunihiko@socionext.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add support for the GPIO controller in the pm6350 PMIC.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20211007212444.328034-6-luca@z3ntu.xyzSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add pmic-gpio compatible string for pm6350 pmic.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20211007212444.328034-5-luca@z3ntu.xyzSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'renesas-pinctrl-for-v5.16-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel

pinctrl: renesas: Updates for v5.16

  - Fix duplicate port register on RZ/G2L,
  - A minor improvement.

I2C pins's resistance value can be controlled by rsel register.
This patch provides rsel (resistance selection) setting on MT8195
Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210924080632.28410-6-zhiyong.tao@mediatek.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

This patch supports rsel(resistance selection) feature for I2C pins.
It provides more resistance selection solution in different ICs.
It provides rsel define and si unit solution by identifying
"mediatek,rsel_resistance_in_si_unit" property in pio dtsi node.
Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210924080632.28410-5-zhiyong.tao@mediatek.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Fix Camel spelling coding style to avoid checkpatch
warning in a following patch.
Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210924080632.28410-4-zhiyong.tao@mediatek.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

For supporting SI units in "bias-pull-down" & "bias-pull-up",
change pull up/down description
and add "mediatek,rsel_resistance_in_si_unit" description.
Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
Link: https://lore.kernel.org/r/20210924080632.28410-3-zhiyong.tao@mediatek.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

This patch adds rsel define for mt8195.
Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210924080632.28410-2-zhiyong.tao@mediatek.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Currently, if the GPIO is configured as output in the bootloader
and user changes the mode to input in HLOS, it would end up
getting configured as input/output. Functionally, this is fine;
however, there may be some requirements where the output needs
to be disabled so that it can be used only for input.

Add support to enable/disable output mode through "output-enable"
or "output-disable" pinctrl properties.
Signed-off-by: Subbaraman Narayanamurthy <quic_subbaram@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1631588246-4811-3-git-send-email-quic_subbaram@quicinc.com
[Drop copyright change which is already upstrean in -rcN]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Remove the duplicate port register 22h and replace it with missing port
register 21h.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210922074140.22178-1-biju.das.jz@bp.renesas.com
Fixes: c4c4637e ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add support for the pinconf DT property output-enable, output-disable
so that output can be enabled/disabled.
Signed-off-by: Subbaraman Narayanamurthy <quic_subbaram@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1631588246-4811-2-git-send-email-quic_subbaram@quicinc.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

It's a porting of pinctrl-scuba driver from CAF msm-4.19 kernel.  The
egpio and wake bits are removed.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210923033224.29719-3-shawn.guo@linaro.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add device tree bindings for QCM2290 pinctrl.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210923033224.29719-2-shawn.guo@linaro.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

This adds pincontrol driver for tlmm block found in SM6350 SoC

This patch is based on downstream copyleft code.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210923161450.15278-2-konrad.dybcio@somainline.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add device tree binding Documentation details for Qualcomm SM6350
pinctrl driver.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210923161450.15278-1-konrad.dybcio@somainline.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add the functions for QUP4 (spi, uart, uim & i2c), sdc3 and audio_pcm as
derived from the downstream gpiomux configuration.

Also sort the functions alphabetically, while we're at it.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210911232707.259615-2-luca@z3ntu.xyzSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Setting this up will configure wake from suspend properly,
and wake only for the interrupts that are setup in wake_mask,
not all interrupts.

Fixes: 6cf5e9ef ("pinctrl: add pinctrl driver on mt8195")
Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20210911071046.17349-2-zhiyong.tao@mediatek.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

There is a spelling mistake in a dev_err message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210826123516.14441-1-colin.king@canonical.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

remove it because "if (ARCH_U8500 || ARCH_NOMADIK)" is already used
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210825082536.2547-1-caihuoqing@baidu.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Certain SoC are missing the middle part gpios in consecutive pins,
it's better to check if mtk_pin_desc is a valid pin for the extensibility
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Link: https://lore.kernel.org/r/20210914085137.31761-5-sam.shih@mediatek.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Global static variables don't need to be initialized to 0, because the
compiler will initialize them.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Link: https://lore.kernel.org/r/20210906134040.96642-1-wangborong@cdjrlc.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Merge tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tools updates from Arnaldo Carvalho de Melo:

 - Add missing fields and remove some duplicate fields when printing a
   perf_event_attr.

 - Fix hybrid config terms list corruption.

 - Update kernel header copies, some resulted in new kernel features
   being automagically added to 'perf trace' syscall/tracepoint argument
   id->string translators.

 - Add a file generated during the documentation build to .gitignore.

 - Add an option to build without libbfd, as some distros, like Debian
   consider its ABI unstable.

 - Add support to print a textual representation of IBS raw sample data
   in 'perf report'.

 - Fix bpf 'perf test' sample mismatch reporting

 - Fix passing arguments to stackcollapse report in a 'perf script'
   python script.

 - Allow build-id with trailing zeros.

 - Look for ImageBase in PE file to compute .text offset.

* tag 'perf-tools-for-v5.15-2021-09-11' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (25 commits)
  tools headers UAPI: Update tools's copy of drm.h headers
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers UAPI: Sync linux/fs.h with the kernel sources
  tools headers UAPI: Sync linux/in.h copy with the kernel sources
  perf tools: Add an option to build without libbfd
  perf tools: Allow build-id with trailing zeros
  perf tools: Fix hybrid config terms list corruption
  perf tools: Factor out copy_config_terms() and free_config_terms()
  perf tools: Fix perf_event_attr__fprintf() missing/dupl. fields
  perf tools: Ignore Documentation dependency file
  perf bpf: Provide a weak btf__load_from_kernel_by_id() for older libbpf versions
  tools include UAPI: Update linux/mount.h copy
  perf beauty: Cover more flags in the  move_mount syscall argument beautifier
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  tools include UAPI: Sync sound/asound.h copy with the kernel sources
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
  perf report: Add support to print a textual representation of IBS raw sample data
  perf report: Add tools/arch/x86/include/asm/amd-ibs.h
  perf env: Add perf_env__cpuid, perf_env__{nr_}pmu_mappings
  ...

Pull compiler attributes updates from Miguel Ojeda:

 - Fix __has_attribute(__no_sanitize_coverage__) for GCC 4 (Marco Elver)

 - Add Nick as Reviewer for compiler_attributes.h (Nick Desaulniers)

 - Move __compiletime_{error|warning} (Nick Desaulniers)

* tag 'compiler-attributes-for-linus-v5.15-rc1-v2' of git://github.com/ojeda/linux:
  compiler_attributes.h: move __compiletime_{error|warning}
  MAINTAINERS: add Nick as Reviewer for compiler_attributes.h
  Compiler Attributes: fix __has_attribute(__no_sanitize_coverage__) for GCC 4

Pull auxdisplay updates from Miguel Ojeda:
 "An assortment of improvements for auxdisplay:

   - Replace symbolic permissions with octal permissions (Jinchao Wang)

   - ks0108: Switch to use module_parport_driver() (Andy Shevchenko)

   - charlcd: Drop unneeded initializers and switch to C99 style (Andy
     Shevchenko)

   - hd44780: Fix oops on module unloading (Lars Poeschel)

   - Add I2C gpio expander example (Ralf Schlatterbeck)"

* tag 'auxdisplay-for-linus-v5.15-rc1' of git://github.com/ojeda/linux:
  auxdisplay: Replace symbolic permissions with octal permissions
  auxdisplay: ks0108: Switch to use module_parport_driver()
  auxdisplay: charlcd: Drop unneeded initializers and switch to C99 style
  auxdisplay: hd44780: Fix oops on module unloading
  auxdisplay: Add I2C gpio expander example

Pull CPU hotplug updates from Thomas Gleixner:
 "Updates for the SMP and CPU hotplug:

   - Remove DEFINE_SMP_CALL_CACHE_FUNCTION() which is a left over of the
     original hotplug code and now causing trouble with the ARM64 cache
     topology setup due to the pointless SMP function call.

     It's not longer required as the hotplug callbacks are guaranteed to
     be invoked on the upcoming CPU.

   - Remove the deprecated and now unused CPU hotplug functions

   - Rewrite the CPU hotplug API documentation"

* tag 'smp-urgent-2021-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Documentation: core-api/cpuhotplug: Rewrite the API section
  cpu/hotplug: Remove deprecated CPU-hotplug functions.
  thermal: Replace deprecated CPU-hotplug functions.
  drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()