Pull CXL updates from Dan Williams:
 "CXL has mechanisms to enumerate the performance characteristics of
  memory devices. Those mechanisms allow Linux to build the equivalent
  of ACPI SRAT, SLIT, and HMAT tables dynamically at runtime. That
  capability is necessary because static ACPI can not represent dynamic
  CXL configurations (and reconfigurations).

  So, building on the v6.8 work to add "Quality of Service" enumeration,
  this update plumbs CXL "access coordinates" (read/write access latency
  and bandwidth) in all the same places that ACPI HMAT feeds similar
  data. Follow-on patches from the -mm side can then use that data to
  feed mechanisms like mm/memory-tiers.c. Greg has acked the touch to
  drivers/base/.

  The other feature update this cycle is support for CXL error injection
  via the ACPI EINJ module. That facility enables injection of bus
  protocol errors provided the user knows the magic address values to
  insert in the interface. To hide that magic, and make this easier to
  use, new error injection attributes were added to CXL debugfs. That
  interface injects the errors relative to a CXL object rather than
  require user tooling to know how to lookup and inject RCRB (Root
  Complex Register Block) addresses into the raw EINJ debugfs interface.
  It received some helpful review comments from Tony, but no explicit
  acks from the ACPI side. The primary user visible change for existing
  EINJ users is that they may find that einj.ko was already loaded by
  cxl_core.ko. Previously, einj.ko was only loaded on demand.

  The usual collection of miscellaneous cleanups are also present this
  cycle.

  Summary:

   - Supplement ACPI HMAT reported memory performance with native CXL
     memory performance enumeration

   - Add support for CXL error injection via the ACPI EINJ mechanism

   - Cleanup CXL DOE and CDAT integration

   - Miscellaneous cleanups and fixes"

* tag 'cxl-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (21 commits)
  Documentation/ABI/testing/debugfs-cxl: Fix "Unexpected indentation"
  lib/firmware_table: Provide buffer length argument to cdat_table_parse()
  cxl/pci: Get rid of pointer arithmetic reading CDAT table
  cxl/pci: Rename DOE mailbox handle to doe_mb
  cxl: Fix the incorrect assignment of SSLBIS entry pointer initial location
  cxl/core: Add CXL EINJ debugfs files
  EINJ, Documentation: Update EINJ kernel doc
  EINJ: Add CXL error type support
  EINJ: Migrate to a platform driver
  cxl/region: Deal with numa nodes not enumerated by SRAT
  cxl/region: Add memory hotplug notifier for cxl region
  cxl/region: Add sysfs attribute for locality attributes of CXL regions
  cxl/region: Calculate performance data for a region
  cxl: Set cxlmd->endpoint before adding port device
  cxl: Move QoS class to be calculated from the nearest CPU
  cxl: Split out host bridge access coordinates
  cxl: Split out combine_coordinates() for common shared usage
  ACPI: HMAT / cxl: Add retrieval of generic port coordinates for both access classes
  ACPI: HMAT: Introduce 2 levels of generic port access class
  base/node / ACPI: Enumerate node access class for 'struct access_coordinate'
  ...

Update them to the correct revision numbers.

Fixes: 522b1d69 ("x86/cpu/amd: Add a Zenbleed fix")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull powerpc updates from Michael Ellerman:

 - Add AT_HWCAP3 and AT_HWCAP4 aux vector entries for future use
   by glibc

 - Add support for recognising the Power11 architected and raw PVRs

 - Add support for nr_cpus=n on the command line where the
   boot CPU is >= n

 - Add ppcxx_allmodconfig targets for all 32-bit sub-arches

 - Other small features, cleanups and fixes

Thanks to Akanksha J N, Brian King, Christophe Leroy, Dawei Li, Geoff
Levand, Greg Kroah-Hartman, Jan-Benedict Glaw, Kajol Jain, Kunwu Chan,
Li zeming, Madhavan Srinivasan, Masahiro Yamada, Nathan Chancellor,
Nicholas Piggin, Peter Bergner, Qiheng Lin, Randy Dunlap, Ricardo B.
Marliere, Rob Herring, Sathvika Vasireddy, Shrikanth Hegde, Uwe
Kleine-König, Vaibhav Jain, and Wen Xiong.

* tag 'powerpc-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (71 commits)
  powerpc/macio: Make remove callback of macio driver void returned
  powerpc/83xx: Fix build failure with FPU=n
  powerpc/64s: Fix get_hugepd_cache_index() build failure
  powerpc/4xx: Fix warp_gpio_leds build failure
  powerpc/amigaone: Make several functions static
  powerpc/embedded6xx: Fix no previous prototype for avr_uart_send() etc.
  macintosh/adb: make adb_dev_class constant
  powerpc: xor_vmx: Add '-mhard-float' to CFLAGS
  powerpc/fsl: Fix mfpmr() asm constraint error
  powerpc: Remove cpu-as-y completely
  powerpc/fsl: Modernise mt/mfpmr
  powerpc/fsl: Fix mfpmr build errors with newer binutils
  powerpc/64s: Use .machine power4 around dcbt
  powerpc/64s: Move dcbt/dcbtst sequence into a macro
  powerpc/mm: Code cleanup for __hash_page_thp
  powerpc/hv-gpci: Fix the H_GET_PERF_COUNTER_INFO hcall return value checks
  powerpc/irq: Allow softirq to hardirq stack transition
  powerpc: Stop using of_root
  powerpc/machdep: Define 'compatibles' property in ppc_md and use it
  of: Reimplement of_machine_is_compatible() using of_machine_compatible_match()
  ...

This reverts commits 99101dda and
b80b701d.

Linus reports that the sysreg reserved bit checks in KVM have led to
build failures, arising from commit fdd867fe ("arm64/sysreg: Add
register fields for ID_AA64DFR1_EL1") giving meaning to fields that were
previously RES0.

Of course, this is a genuine issue, since KVM's sysreg emulation depends
heavily on the definition of reserved fields. But at this point the
build breakage is far more offensive, and the right course of action is
to revert and retry later.

All of these build-time assertions were on by default before
commit 99101dda ("KVM: arm64: Make build-time check of RES0/RES1
bits optional"), so deliberately revert it all atomically to avoid
introducing further breakage of bisection.

Link: https://lore.kernel.org/all/CAHk-=whCvkhc8BbFOUf1ddOsgSGgEjwoKv77=HEY1UiVCydGqw@mail.gmail.com/Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull block fixes from Jens Axboe:

 - Revert of a change for mq-deadline that went into the 6.8 release,
   causing a performance regression for some (Bart)

 - Revert of the interruptible discard handling. This needs more work
   since the ioctl and fs path aren't properly split, and will happen
   for the 6.10 kernel release. For 6.9, do the minimal revert
   (Christoph)

 - Fix for an issue with the timestamp caching code (me)

 - kerneldoc fix (Jiapeng)

* tag 'block-6.9-20240315' of git://git.kernel.dk/linux:
  block: fix mismatched kerneldoc function name
  Revert "blk-lib: check for kill signal"
  Revert "block/mq-deadline: use correct way to throttling write requests"
  block: limit block time caching to in_task() context

Pull crypto updates from Herbert Xu:
 "API:

   - Avoid unnecessary copying in scomp for trivial SG lists

  Algorithms:

   - Optimise NEON CCM implementation on ARM64

  Drivers:

   - Add queue stop/query debugfs support in hisilicon/qm

   - Intel qat updates and cleanups"

* tag 'v6.9-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (79 commits)
  Revert "crypto: remove CONFIG_CRYPTO_STATS"
  crypto: scomp - remove memcpy if sg_nents is 1 and pages are lowmem
  crypto: tcrypt - add ffdhe2048(dh) test
  crypto: iaa - fix the missing CRYPTO_ALG_ASYNC in cra_flags
  crypto: hisilicon/zip - fix the missing CRYPTO_ALG_ASYNC in cra_flags
  hwrng: hisi - use dev_err_probe
  MAINTAINERS: Remove T Ambarus from few mchp entries
  crypto: iaa - Fix comp/decomp delay statistics
  crypto: iaa - Fix async_disable descriptor leak
  dt-bindings: rng: atmel,at91-trng: add sam9x7 TRNG
  dt-bindings: crypto: add sam9x7 in Atmel TDES
  dt-bindings: crypto: add sam9x7 in Atmel SHA
  dt-bindings: crypto: add sam9x7 in Atmel AES
  crypto: remove CONFIG_CRYPTO_STATS
  crypto: dh - Make public key test FIPS-only
  crypto: rockchip - fix to check return value
  crypto: jitter - fix CRYPTO_JITTERENTROPY help text
  crypto: qat - make ring to service map common for QAT GEN4
  crypto: qat - fix ring to service map for dcc in 420xx
  crypto: qat - fix ring to service map for dcc in 4xxx
  ...

Pull VFIO updates from Alex Williamson:

 - Add warning in unlikely case that device is not captured with
   driver_override (Kunwu Chan)

 - Error handling improvements in mlx5-vfio-pci to detect firmware
   tracking object error states, logging of firmware error syndrom, and
   releasing of firmware resources in aborted migration sequence (Yishai
   Hadas)

 - Correct an un-alphabetized VFIO MAINTAINERS entry (Alex Williamson)

 - Make the mdev_bus_type const and also make the class struct const for
   a couple of the vfio-mdev sample drivers (Ricardo B. Marliere)

 - Addition of a new vfio-pci variant driver for the GPU of NVIDIA's
   Grace-Hopper superchip. During initialization of the chip-to-chip
   interconnect in this hardware module, the PCI BARs of the device
   become unused in favor of a faster, coherent mechanism for exposing
   device memory. This driver primarily changes the VFIO representation
   of the device to masquerade this coherent aperture to replace the
   physical PCI BARs for userspace drivers. This also incorporates use
   of a new vma flag allowing KVM to use write combining attributes for
   uncached device memory (Ankit Agrawal)

 - Reset fixes and cleanups for the pds-vfio-pci driver. Save and
   restore files were previously leaked if the device didn't pass
   through an error state, this is resolved and later re-fixed to
   prevent access to the now freed files. Reset handling is also
   refactored to remove the complicated deferred reset mechanism (Brett
   Creeley)

 - Remove some references to pl330 in the vfio-platform amba driver
   (Geert Uytterhoeven)

 - Remove twice redundant and ugly code to unpin incidental pins of the
   zero-page (Alex Williamson)

 - Deferred reset logic is also removed from the hisi-acc-vfio-pci
   driver as a simplification (Shameer Kolothum)

 - Enforce that mlx5-vfio-pci devices must support PRE_COPY and remove
   resulting unnecessary code. There is no device firmware that has been
   available publicly without this support (Yishai Hadas)

 - Switch over to using the .remove_new callback for vfio-platform in
   support of the broader transition for a void remove function (Uwe
   Kleine-König)

 - Resolve multiple issues in interrupt code for VFIO bus drivers that
   allow calling eventfd_signal() on a NULL context. This also remove a
   potential race in INTx setup on certain hardware for vfio-pci, races
   with various mechanisms to mask INTx, and leaked virqfds in
   vfio-platform (Alex Williamson)

* tag 'vfio-v6.9-rc1' of https://github.com/awilliam/linux-vfio: (29 commits)
  vfio/fsl-mc: Block calling interrupt handler without trigger
  vfio/platform: Create persistent IRQ handlers
  vfio/platform: Disable virqfds on cleanup
  vfio/pci: Create persistent INTx handler
  vfio: Introduce interface to flush virqfd inject workqueue
  vfio/pci: Lock external INTx masking ops
  vfio/pci: Disable auto-enable of exclusive INTx IRQ
  vfio/pds: Refactor/simplify reset logic
  vfio/pds: Make sure migration file isn't accessed after reset
  vfio/platform: Convert to platform remove callback returning void
  vfio/mlx5: Enforce PRE_COPY support
  vfio/mbochs: make mbochs_class constant
  vfio/mdpy: make mdpy_class constant
  hisi_acc_vfio_pci: Remove the deferred_reset logic
  Revert "vfio/type1: Unpin zero pages"
  vfio/nvgrace-gpu: Convey kvm to map device memory region as noncached
  vfio: amba: Rename pl330_ids[] to vfio_amba_ids[]
  vfio/pds: Always clear the save/restore FDs on reset
  vfio/nvgrace-gpu: Add vfio pci variant module for grace hopper
  vfio/pci: rename and export range_intersect_range
  ...

Pull kvm updates from Paolo Bonzini:
 "S390:

   - Changes to FPU handling came in via the main s390 pull request

   - Only deliver to the guest the SCLP events that userspace has
     requested

   - More virtual vs physical address fixes (only a cleanup since
     virtual and physical address spaces are currently the same)

   - Fix selftests undefined behavior

  x86:

   - Fix a restriction that the guest can't program a PMU event whose
     encoding matches an architectural event that isn't included in the
     guest CPUID. The enumeration of an architectural event only says
     that if a CPU supports an architectural event, then the event can
     be programmed *using the architectural encoding*. The enumeration
     does NOT say anything about the encoding when the CPU doesn't
     report support the event *in general*. It might support it, and it
     might support it using the same encoding that made it into the
     architectural PMU spec

   - Fix a variety of bugs in KVM's emulation of RDPMC (more details on
     individual commits) and add a selftest to verify KVM correctly
     emulates RDMPC, counter availability, and a variety of other
     PMC-related behaviors that depend on guest CPUID and therefore are
     easier to validate with selftests than with custom guests (aka
     kvm-unit-tests)

   - Zero out PMU state on AMD if the virtual PMU is disabled, it does
     not cause any bug but it wastes time in various cases where KVM
     would check if a PMC event needs to be synthesized

   - Optimize triggering of emulated events, with a nice ~10%
     performance improvement in VM-Exit microbenchmarks when a vPMU is
     exposed to the guest

   - Tighten the check for "PMI in guest" to reduce false positives if
     an NMI arrives in the host while KVM is handling an IRQ VM-Exit

   - Fix a bug where KVM would report stale/bogus exit qualification
     information when exiting to userspace with an internal error exit
     code

   - Add a VMX flag in /proc/cpuinfo to report 5-level EPT support

   - Rework TDP MMU root unload, free, and alloc to run with mmu_lock
     held for read, e.g. to avoid serializing vCPUs when userspace
     deletes a memslot

   - Tear down TDP MMU page tables at 4KiB granularity (used to be
     1GiB). KVM doesn't support yielding in the middle of processing a
     zap, and 1GiB granularity resulted in multi-millisecond lags that
     are quite impolite for CONFIG_PREEMPT kernels

   - Allocate write-tracking metadata on-demand to avoid the memory
     overhead when a kernel is built with i915 virtualization support
     but the workloads use neither shadow paging nor i915 virtualization

   - Explicitly initialize a variety of on-stack variables in the
     emulator that triggered KMSAN false positives

   - Fix the debugregs ABI for 32-bit KVM

   - Rework the "force immediate exit" code so that vendor code
     ultimately decides how and when to force the exit, which allowed
     some optimization for both Intel and AMD

   - Fix a long-standing bug where kvm_has_noapic_vcpu could be left
     elevated if vCPU creation ultimately failed, causing extra
     unnecessary work

   - Cleanup the logic for checking if the currently loaded vCPU is
     in-kernel

   - Harden against underflowing the active mmu_notifier invalidation
     count, so that "bad" invalidations (usually due to bugs elsehwere
     in the kernel) are detected earlier and are less likely to hang the
     kernel

  x86 Xen emulation:

   - Overlay pages can now be cached based on host virtual address,
     instead of guest physical addresses. This removes the need to
     reconfigure and invalidate the cache if the guest changes the gpa
     but the underlying host virtual address remains the same

   - When possible, use a single host TSC value when computing the
     deadline for Xen timers in order to improve the accuracy of the
     timer emulation

   - Inject pending upcall events when the vCPU software-enables its
     APIC to fix a bug where an upcall can be lost (and to follow Xen's
     behavior)

   - Fall back to the slow path instead of warning if "fast" IRQ
     delivery of Xen events fails, e.g. if the guest has aliased xAPIC
     IDs

  RISC-V:

   - Support exception and interrupt handling in selftests

   - New self test for RISC-V architectural timer (Sstc extension)

   - New extension support (Ztso, Zacas)

   - Support userspace emulation of random number seed CSRs

  ARM:

   - Infrastructure for building KVM's trap configuration based on the
     architectural features (or lack thereof) advertised in the VM's ID
     registers

   - Support for mapping vfio-pci BARs as Normal-NC (vaguely similar to
     x86's WC) at stage-2, improving the performance of interacting with
     assigned devices that can tolerate it

   - Conversion of KVM's representation of LPIs to an xarray, utilized
     to address serialization some of the serialization on the LPI
     injection path

   - Support for _architectural_ VHE-only systems, advertised through
     the absence of FEAT_E2H0 in the CPU's ID register

   - Miscellaneous cleanups, fixes, and spelling corrections to KVM and
     selftests

  LoongArch:

   - Set reserved bits as zero in CPUCFG

   - Start SW timer only when vcpu is blocking

   - Do not restart SW timer when it is expired

   - Remove unnecessary CSR register saving during enter guest

   - Misc cleanups and fixes as usual

  Generic:

   - Clean up Kconfig by removing CONFIG_HAVE_KVM, which was basically
     always true on all architectures except MIPS (where Kconfig
     determines the available depending on CPU capabilities). It is
     replaced either by an architecture-dependent symbol for MIPS, and
     IS_ENABLED(CONFIG_KVM) everywhere else

   - Factor common "select" statements in common code instead of
     requiring each architecture to specify it

   - Remove thoroughly obsolete APIs from the uapi headers

   - Move architecture-dependent stuff to uapi/asm/kvm.h

   - Always flush the async page fault workqueue when a work item is
     being removed, especially during vCPU destruction, to ensure that
     there are no workers running in KVM code when all references to
     KVM-the-module are gone, i.e. to prevent a very unlikely
     use-after-free if kvm.ko is unloaded

   - Grab a reference to the VM's mm_struct in the async #PF worker
     itself instead of gifting the worker a reference, so that there's
     no need to remember to *conditionally* clean up after the worker

  Selftests:

   - Reduce boilerplate especially when utilize selftest TAP
     infrastructure

   - Add basic smoke tests for SEV and SEV-ES, along with a pile of
     library support for handling private/encrypted/protected memory

   - Fix benign bugs where tests neglect to close() guest_memfd files"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (246 commits)
  selftests: kvm: remove meaningless assignments in Makefiles
  KVM: riscv: selftests: Add Zacas extension to get-reg-list test
  RISC-V: KVM: Allow Zacas extension for Guest/VM
  KVM: riscv: selftests: Add Ztso extension to get-reg-list test
  RISC-V: KVM: Allow Ztso extension for Guest/VM
  RISC-V: KVM: Forward SEED CSR access to user space
  KVM: riscv: selftests: Add sstc timer test
  KVM: riscv: selftests: Change vcpu_has_ext to a common function
  KVM: riscv: selftests: Add guest helper to get vcpu id
  KVM: riscv: selftests: Add exception handling support
  LoongArch: KVM: Remove unnecessary CSR register saving during enter guest
  LoongArch: KVM: Do not restart SW timer when it is expired
  LoongArch: KVM: Start SW timer only when vcpu is blocking
  LoongArch: KVM: Set reserved bits as zero in CPUCFG
  KVM: selftests: Explicitly close guest_memfd files in some gmem tests
  KVM: x86/xen: fix recursive deadlock in timer injection
  KVM: pfncache: simplify locking and make more self-contained
  KVM: x86/xen: remove WARN_ON_ONCE() with false positives in evtchn delivery
  KVM: x86/xen: inject vCPU upcall vector when local APIC is enabled
  KVM: x86/xen: improve accuracy of Xen timers
  ...

Merge tag 'sparc-for-6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc

Pull sparc updates from Andreas Larsson:

 - Fix missing prototype warnings in various places, including switching
   to using generic cmpdi2/ucmpdi2 and parport.h and stop selecting
   unneeded GENERIC_ISA_DMA.

 - Reduce duplicate code by using shared font data, with dependency
   fixup in separate commit touching lib/fonts.

 - Convert sbus drives to use remove callbacks returning void

 - Fix return values of __setup handlers

 - Section mismatch fix for grpci pci drivers

 - Make the vio bus type constant

 - Kconfig cleanups and fixes

 - Typo fixes

* tag 'sparc-for-6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
  lib/fonts: Allow Sparc console 8x16 font for sparc64 early boot text console
  sbus: uctrl: Convert to platform remove callback returning void
  sbus: flash: Convert to platform remove callback returning void
  sbus: envctrl: Convert to platform remove callback returning void
  sbus: display7seg: Convert to platform remove callback returning void
  sbus: bbc_i2c: Convert to platform remove callback returning void
  sbus: Add prototype for bbc_envctrl_init and bbc_envctrl_cleanup to header
  sparc32: Fix section mismatch in leon_pci_grpci
  sparc32: Fix parport build with sparc32
  sparc32: Do not select GENERIC_ISA_DMA
  mtd: maps: sun_uflash: Declare uflash_devinit static
  sparc32: Fix build with trapbase
  sparc32: Use generic cmpdi2/ucmpdi2 variants
  sparc: select FRAME_POINTER instead of redefining it
  sparc: vDSO: fix return value of __setup handler
  sparc64: NMI watchdog: fix return value of __setup handler
  sparc: vio: make vio_bus_type const
  sparc: Fix typos
  sparc: Use shared font data
  sparc: remove obsolete config ARCH_ATU

Pull MIPS updates from Thomas Bogendoerfer:

 - added support for Mobileye SoCs

 - unified GPR/CP0 regs handling for uasm

 - cleanups and fixes

* tag 'mips_6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (56 commits)
  mips: cm: Convert __mips_cm_phys_base() to weak function
  mips: cm: Convert __mips_cm_l2sync_phys_base() to weak function
  mips: dts: ralink: mt7621: add cell count properties to usb
  mips: dts: ralink: mt7621: add serial1 and serial2 nodes
  mips: dts: ralink: mt7621: reorder serial0 properties
  mips: dts: ralink: mt7621: associate uart1_pins with serial0
  MIPS: ralink: Don't use "proxy" headers
  mips: sibyte: make tb_class constant
  mips: mt: make mt_class constant
  MIPS: ralink: Remove unused of_gpio.h
  bus: bt1-apb: Remove duplicate include
  MAINTAINERS: remove entry to non-existing file in MOBILEYE MIPS SOCS
  MIPS: mipsregs: Parse fp and sp register by name in parse_r
  tty: mips_ejtag_fdc: Fix passing incompatible pointer type warning
  mips: zboot: Fix "no previous prototype" build warning
  MIPS: mipsregs: Set proper ISA level for virt extensions
  MIPS: Implement microMIPS MT ASE helpers
  MIPS: Limit MIPS_MT_SMP support by ISA reversion
  MIPS: Loongson64: test for -march=loongson3a cflag
  MIPS: BMIPS: Drop unnecessary assembler flag
  ...

Pull devicetree updates from Rob Herring:
 "DT core:

   - Add cleanup.h based auto release of struct device_node pointers via
     __free marking and new for_each_child_of_node_scoped() iterator to
     use it.

   - Always create a base skeleton DT when CONFIG_OF is enabled. This
     supports several usecases of adding DT data on non-DT booted
     systems.

   - Move around some /reserved-memory code in preparation for further
     improvements

   - Add a stub for_each_property_of_node() for !OF

   - Adjust the printk levels on some messages

   - Fix __be32 sparse warning

   - Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
     (currently orphaned)

   - Add Saravana Kannan and drop Frank Rowand as DT maintainers

  DT bindings:

   - Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
     fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
     xlnx,sd-fec to DT schemas

   - Add existing, but undocumented fsl,imx-anatop binding

   - Add bunch of undocumented vendor prefixes used in compatible
     strings

   - Drop obsolete brcm,bcm2835-pm-wdt binding

   - Drop obsolete i2c.txt which as been replaced with schema in
     dtschema

   - Add DPS310 device and sort trivial-devices.yaml

   - Enable undocumented compatible checks on DT binding examples

   - More QCom maintainer fixes/updates

   - Updates to writing-schema.rst and DT submitting-patches.rst to
     cover some frequent review comments

   - Clean-up SPDX tags to use 'OR' rather than 'or'"

* tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
  dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators
  of: unittest: Use for_each_child_of_node_scoped()
  of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling
  of: Add cleanup.h based auto release via __free(device_node) markings
  of: Move all FDT reserved-memory handling into of_reserved_mem.c
  of: Add KUnit test to confirm DTB is loaded
  of: unittest: treat missing of_root as error instead of fixing up
  x86/of: Unconditionally call unflatten_and_copy_device_tree()
  um: Unconditionally call unflatten_device_tree()
  of: Create of_root if no dtb provided by firmware
  of: Always unflatten in unflatten_and_copy_device_tree()
  dt-bindings: timer: mediatek: Convert to json-schema
  dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support
  soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage
  dt-bindings: fsl-imx-sdma: fix HDMI audio index
  dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6
  dt-bindings: soc: imx: fsl,imx-anatop: add binding
  dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML
  dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML
  of: make for_each_property_of_node() available to to !OF
  ...

Pull MTD updates from Miquel Raynal:
 "MTD:

   - The Carillo Ranch driver has been removed

   - Top level mtd bindings have received a couple of improvements
     (references, selects)

   - The ssfdc driver received few minor adjustments

   - The usual load of misc/small improvements and fixes

  Raw NAND:

   - The main series brought is an update of the Broadcom support to
     support all BCMBCA SoCs and their specificity (ECC, write
     protection, configuration straps), plus a few misc fixes and
     changes in the main driver. Device tree updates are also part of
     this PR, initially because of a misunderstanding on my side.

   - The STM32_FMC2 controller driver is also upgraded to properly
     support MP1 and MP25 SoCs.

   - A new compatible is added for an Atmel flavor.

   - Among all these feature changes, there is as well a load of
     continuous read related fixes, avoiding more corner conditions and
     clarifying the logic. Finally a few miscellaneous fixes are made to
     the core, the lpx32xx_mlc, fsl_lbc, Meson and Atmel controller
     driver, as well as final one in the Hynix vendor driver.

  SPI-NAND:

   - The ESMT support has been extended to match 5 bytes ID to avoid
     collisions. Winbond support on its side receives support for
     W25N04KV chips.

  SPI NOR:

   - SPI NOR gets the non uniform erase code cleaned. We stopped using
     bitmasks for erase types and flags, and instead introduced
     dedicated members. We then passed the SPI NOR erase map to MTD.
     Users can now determine the erase regions and make informed
     decisions on partitions size.

   - An optional interrupt property is now described in the bindings"

* tag 'mtd/for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (50 commits)
  mtd: rawnand: Ensure continuous reads are well disabled
  mtd: rawnand: Constrain even more when continuous reads are enabled
  mtd: rawnand: brcmnand: Add support for getting ecc setting from strap
  mtd: rawnand: brcmnand: fix sparse warnings
  mtd: nand: raw: atmel: Fix comment in timings preparation
  mtd: rawnand: Ensure all continuous terms are always in sync
  mtd: rawnand: Add a helper for calculating a page index
  mtd: rawnand: Fix and simplify again the continuous read derivations
  mtd: rawnand: hynix: remove @nand_technology kernel-doc description
  dt-bindings: atmel-nand: add microchip,sam9x7-pmecc
  mtd: rawnand: brcmnand: Support write protection setting from dts
  mtd: rawnand: brcmnand: Add BCMBCA read data bus interface
  mtd: rawnand: brcmnand: Rename bcm63138 nand driver
  arm64: dts: broadcom: bcmbca: Update router boards
  arm64: dts: broadcom: bcmbca: Add NAND controller node
  ARM: dts: broadcom: bcmbca: Add NAND controller node
  mtd: spi-nor: core: correct type of i
  mtd: spi-nor: core: set mtd->eraseregions for non-uniform erase map
  mtd: spi-nor: core: get rid of SNOR_OVERLAID_REGION flag
  mtd: spi-nor: core: get rid of SNOR_LAST_REGION flag
  ...

Pull dmaengine updates from Vinod Koul:
 "New hardware support:
   - Allwinner H616 dma support
   - Renesas r8a779h0 dma controller support
   - TI CSI2RX dma support

  Updates:
   - Freescale edma driver updates for TCD64csupport for i.MX95
   - constify of pointers and args
   - Yaml conversion for MediaTek High-Speed controller binding
   - TI k3 udma support for TX/RX DMA channels for thread IDs:

* tag 'dmaengine-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (25 commits)
  dmaengine: of: constify of_phandle_args in of_dma_find_controller()
  dmaengine: pl08x: constify pointer to char in filter function
  MAINTAINERS: change in AMD ptdma maintainer
  MAINTAINERS: adjust file entry in MEDIATEK DMA DRIVER
  dmaengine: idxd: constify the struct device_type usage
  dt-bindings: renesas,rcar-dmac: Add r8a779h0 support
  dt-bindings: dma: convert MediaTek High-Speed controller to the json-schema
  dmaengine: idxd: make dsa_bus_type const
  dmaengine: fsl-edma: integrate TCD64 support for i.MX95
  dt-bindings: fsl-dma: fsl-edma: add fsl,imx95-edma5 compatible string
  dmaengine: mcf-edma: utilize edma_write_tcdreg() macro for TCD Access
  dmaengine: fsl-edma: add address for channel mux register in fsl_edma_chan
  dmaengine: fsl-edma: fix spare build warning
  dmaengine: fsl-edma: involve help macro fsl_edma_set(get)_tcd()
  dt-bindings: mmp-dma: convert to YAML
  dmaengine: ti: k3-psil-j721s2: Add entry for CSI2RX
  dmaengine: ti: k3-udma-glue: Add function to request RX chan for thread ID
  dmaengine: ti: k3-udma-glue: Add function to request TX chan for thread ID
  dmaengine: ti: k3-udma-glue: Update name for remote RX channel device
  dmaengine: ti: k3-udma-glue: Add function to parse channel by ID
  ...

Pull soundwire updates from Vinod Koul:

 - Constify sdw_bus and sdw_master_type objects

 - use of rtd helper for better code

 - intel aux device remove redundant assignment

* tag 'soundwire-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: Use snd_soc_substream_to_rtd() to obtain rtd
  soundwire: constify the struct device_type usage
  soundwire: bus_type: make sdw_bus_type const
  soundwire: intel_auxdevice: remove redundant assignment to variable link_flags
  soundwire: stream: add missing const to Documentation

Pull i2c updates from Wolfram Sang:
 "Minor changes to the I2C core. Most changes are in drivers:

  The i801 and designware drivers received most of the changes,
  including refactorings and some additions.

  Recovery changes for the iMX and iMX-LPI2C are now utilizing the
  generic i2c support.

  The Cadence driver now supports system suspend and resume.

  The hisi, mpc, sh_mobile, and npcm drivers have undergone some
  cleanups and improvements. Meanwhile, Uwe continues his work on
  converting the "remove" callback to become a void function.

  The pca954x mux driver now supports additional configurations, such as
  isolating faulty channels and flushing stuck buses, among others.

  Support has been added for Renesas r8a779h0, i.MX95 LPI2C, and
  Microchip sam9x7. Meanwhile, Geert lays the groundwork for the
  upcoming R-Car Gen4"

* tag 'i2c-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits)
  i2c: sprd: Convert to platform remove callback returning void
  Documentation: i2c: Document that client auto-detection is a legacy mechanism
  i2c: remove redundant condition
  i2c: rcar: Prepare for the advent of ARCH_RCAR_GEN4
  i2c: imx-lpi2c: add generic GPIO recovery for LPI2C
  i2c: cadence: Add system suspend and resume PM support
  i2c: mpc: remove outdated macro
  i2c: mpc: use proper binding for transfer timeouts
  dt-bindings: i2c: mpc: use proper binding for transfer timeouts
  i2c: smbus: Prepare i2c_register_spd for usage on muxed segments
  i2c: constify the struct device_type usage
  i2c: designware: Implement generic polling mode code for Wangxun 10Gb NIC
  i2c: designware: Fix RX FIFO depth define on Wangxun 10Gb NIC
  i2c: designware: Move interrupt handling functions before i2c_dw_xfer()
  i2c: designware: Use accessors to DW_IC_INTR_MASK register
  i2c: designware: Do not enable interrupts shortly in polling mode
  i2c: designware: Uniform initialization flow for polling mode
  dt-bindings: i2c: at91: Add sam9x7 compatible string
  dt-bindings: i2c: imx-lpi2c: add i.MX95 LPI2C
  i2c: Remove redundant comparison in npcm_i2c_reg_slave
  ...

Pull libnvdimm updates from Dave Jiang:

 - ACPI_NFIT Kconfig documetation fix

 - Make nvdimm_bus_type const

 - Make dax_bus_type const

 - remove SLAB_MEM_SPREAD flag usage in DAX

* tag 'libnvdimm-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  dax: remove SLAB_MEM_SPREAD flag usage
  device-dax: make dax_bus_type const
  nvdimm: make nvdimm_bus_type const
  libnvdimm: Fix ACPI_NFIT in BLK_DEV_PMEM help

Pull clk updates from Stephen Boyd:
 "Not a ton of stuff happening in the clk framework. We got some more
  devm helpers and we seem to be going in the direction of "just turn
  this stuff on already and leave me alone!" with the addition of a
  devm_clk_bulk_get_all_enable() API. I'm hoping that we can make that
  into a pmdomain that drivers attach instead, but this API should help
  drivers simplify in the meantime.

  Outside of the devm wrappers, we've got the usual clk driver updates
  that are dominated by the major phone SoC vendors (Samsung and
  Qualcomm) and the non-critical driver fixes for things like incorrect
  topology descriptions and wrong registers or bit fields. More details
  are below, but I'd say that it looks pretty ordinary. The only thing
  that really jumps out at me is the Renesas clk driver that's ignoring
  clks that are assigned to remote processors in DeviceTree. That's a
  new feature that they're using to avoid marking clks as
  CLK_IGNORE_UNUSED based on the configuration of the system.

  Core:
   - Increase dev_id len for clkdev lookups
   - Add a devm_clk_bulk_get_all_enable() API to get and enable all clks
     for a device
   - Add a devm variant of clk_rate_exclusive_get()

  New Drivers:
   - Display, TCSR, GPU, and Camera clock controllers for Qualcomm's X1
     Elite SoC
   - Google GS101 PERIC0 and PERIC1 clock controllers
   - Exynos850 PDMA clocks
   - Exynos850 CPU cluster 0 and 1 (CMU_CPUCLK0/CMU_CPUCLK1) clock
     controllers

  Removed Drivers:
   - Remove the unused Qualcomm sc7180 modem clk driver

  Updates:
   - Fix some static checker errors in the Hisilicon clk driver
   - Polarfire MSSPLL hardware has 4 output clocks (the driver supported
     previously only one output); each of these 4 outputs feed dividers
     and the output of each divider feed individual hardware blocks
     (e.g. CAN, Crypto, eMMC); individual hardware block drivers need to
     control their clocks thus clock driver support was added for all
     MSSPLL output clocks
   - Typo fixes in the Qualcomm IPQ5018 GCC driver
   - Add "qdss_at" clk on Qualcomm IPQ6018, needed for WiFi
   - Properly terminate frequency tables in different Qualcomm clk
     drivers
   - Add MDSS, crypto, and SDCC resets on Qualcomm MSM8953
   - Add missing UFS CLKREF clks on Qualcomm SC8180X
   - Avoid significant delays during boot by adding a softdep on rpmhpd
     to Qualcomm SDM845 gcc driver
   - Add QUPv3 RCGS w/ DFS and video resets to Qualcomm SM8150 GCC
     driver
   - Fix the custom GPU GX "do-nothing" method in the Qualcomm GDSC
     driver
   - Add an external regulator to GX GDSC on Qualcomm SC8280XP GPU clk
     driver
   - Switch display, GPU, video, and camera Qualcomm clk drivers to
     module_platform_driver()
   - Set a longer delay for Venus resets on many Qualcomm SoCs
   - Correct the GDSC wait times in the Qualcomm SDM845 display clk
     driver
   - Fix clock listing Oops on Amlogic axg
   - New pll-rate for Rockchip rk3568
   - i2s rate improvements for Rockchip rk3399
   - Rockchip rk3588 syscon clock fixes and removal of overall
     clock-number from the rk3588 binding header
   - A prerequisite for later improvements to the Rockchip rk3588 linked
     clocks
   - Minor clean-ups and error handling improvements in both
     composite-8m and SCU i.MX clock drivers
   - Fix for SAI_MCLK_SEL definition for i.MX8MP
   - Register the Samsung CMU MISC clock controller earlier, so the
     Multi Core Timer clocksource can use it on Google GS101
   - Propagate Exynos850 SPI IPCLK rate change to parents, so the SPI
     will get proper clock rates
   - Refactor the generic Samsung CPU clock controllers code, preparing
     it for supporting Exynos850 CPU clocks
   - Fix some clk kerneldoc warnings
   - Add Ethernet, SDHI, DMA, and HyperFLASH/QSPI (RPC-IF) clocks on
     Renesas R-Car V4M
   - Ignore all clocks which are assigned to a non-Linux system in the
     Renesas clk driver
   - Add watchdog clock on Renesas RZ/G3S
   - Add camera (CRU) clock and reset on Renesas RZ/G2UL
   - Add support for the Renesas R-Car V4M (R8A779H0) SoC
   - Convert some clk bindings to YAML so they can be validated"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits)
  clk: zynq: Prevent null pointer dereference caused by kmalloc failure
  clk: fractional-divider: Use bit operations consistently
  clk: fractional-divider: Move mask calculations out of lock
  clk: Fix clk_core_get NULL dereference
  clk: starfive: jh7110-vout: Convert to platform remove callback returning void
  clk: starfive: jh7110-isp: Convert to platform remove callback returning void
  clk: imx: imx8-acm: Convert to platform remove callback returning void
  clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset
  clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk'
  clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk'
  clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc
  clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays
  clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays
  clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays
  clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays
  clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays
  clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays
  clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
  clk: mediatek: clk-mt8173-apmixedsys: Use common error handling code in clk_mt8173_apmixed_probe()
  clk: Add a devm variant of clk_rate_exclusive_get()
  ...

Pull media updates from Mauro Carvalho Chehab:

 - DVB budget legacy API was finally documented. It took only 20+ years
   to get some documentation about it...

 - hantro driver has gained support for STM32MP25 VDEC/VENC

 - rkisp1 has gained support for i.MX8MP

 - atomisp got rid of two items from its todo list. Still 5 items
   pending for moving it out of staging

 - lots of driver fixes, cleanups and improvements

* tag 'media/v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (252 commits)
  media: rcar-isp: Disallow unbind of devices
  media: usbtv: Remove useless locks in usbtv_video_free()
  media: mediatek: vcodec: avoid -Wcast-function-type-strict warning
  media: ttpci: fix two memleaks in budget_av_attach
  media: go7007: fix a memleak in go7007_load_encoder
  media: dvb-frontends: avoid stack overflow warnings with clang
  media: pvrusb2: fix uaf in pvr2_context_set_notify
  media: usb: s2255: Refactor s2255_get_fx2fw
  media: ti: j721e-csi2rx: Convert to platform remove callback returning void
  media: stm32-dcmipp: Convert to platform remove callback returning void
  media: nxp: imx8-isi: Convert to platform remove callback returning void
  media: nuvoton: Convert to platform remove callback returning void
  media: chips-media: wave5: Convert to platform remove callback returning void
  media: chips-media: wave5: Remove unnecessary semicolons
  media: i2c: imx290: Fix IMX920 typo
  media: platform: replace of_graph_get_next_endpoint()
  media: i2c: replace of_graph_get_next_endpoint()
  media: ivsc: csi: Make use of sub-device state
  media: ivsc: csi: Swap SINK and SOURCE pads
  media: ipu-bridge: Serialise calls to IPU bridge init
  ...

Pull 9p updates from Eric Van Hensbergen:
 "This includes a number of patches addressing improvements in the cache
  portions of the 9p client.

  The biggest improvements have to do with fixing handling of inodes and
  eliminating duplicate structures and unnecessary allocation/release of
  inode structures and many associated unnecessary protocol traffic.
  This also dramatically reduced code complexity across the code and
  sets us up to add proper temporal cache capabilities"

* tag '9p-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  fs/9p: fix dups even in uncached mode
  fs/9p: simplify iget to remove unnecessary paths
  fs/9p: rework qid2ino logic
  fs/9p: Eliminate now unused v9fs_get_inode
  fs/9p: Eliminate redundant non-cache path in mknod
  fs/9p: remove walk and inode allocation from symlink
  fs/9p: convert mkdir to use get_new_inode
  fs/9p: switch vfsmount to use v9fs_get_new_inode

imx6q has additional regulators compared to imx6ul. Add them to the list
of allowed patterns.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240314145953.2957313-1-alexander.stein@ew.tq-group.comSigned-off-by: Rob Herring <robh@kernel.org>

Pull fuse updates from Miklos Szeredi:

 - Add passthrough mode for regular file I/O.

   This allows performing read and write (also via memory maps) on a
   backing file without incurring the overhead of roundtrips to
   userspace. For now this is only allowed to privileged servers, but
   this limitation will go away in the future (Amir Goldstein)

 - Fix interaction of direct I/O mode with memory maps (Bernd Schubert)

 - Export filesystem tags through sysfs for virtiofs (Stefan Hajnoczi)

 - Allow resending queued requests for server crash recovery (Zhao Chen)

 - Misc fixes and cleanups

* tag 'fuse-update-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (38 commits)
  fuse: get rid of ff->readdir.lock
  fuse: remove unneeded lock which protecting update of congestion_threshold
  fuse: Fix missing FOLL_PIN for direct-io
  fuse: remove an unnecessary if statement
  fuse: Track process write operations in both direct and writethrough modes
  fuse: Use the high bit of request ID for indicating resend requests
  fuse: Introduce a new notification type for resend pending requests
  fuse: add support for explicit export disabling
  fuse: __kuid_val/__kgid_val helpers in fuse_fill_attr_from_inode()
  fuse: fix typo for fuse_permission comment
  fuse: Convert fuse_writepage_locked to take a folio
  fuse: Remove fuse_writepage
  virtio_fs: remove duplicate check if queue is broken
  fuse: use FUSE_ROOT_ID in fuse_get_root_inode()
  fuse: don't unhash root
  fuse: fix root lookup with nonzero generation
  fuse: replace remaining make_bad_inode() with fuse_make_bad()
  virtiofs: drop __exit from virtio_fs_sysfs_exit()
  fuse: implement passthrough for mmap
  fuse: implement splice read/write passthrough
  ...

Pull ext4 updates from Ted Ts'o:
 "Ext4 bug fixes and cleanups, plus some additional kunit tests"

* tag 'ext4_for_linus-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (23 commits)
  ext4: initialize sbi->s_freeclusters_counter and sbi->s_dirtyclusters_counter before use in kunit test
  ext4: hold group lock in ext4 kunit test
  ext4: alloc test super block from sget
  ext4: kunit: use dynamic inode allocation
  ext4: enable meta_bg only when new desc blocks are needed
  ext4: remove unused parameter biop in ext4_issue_discard()
  ext4: remove SLAB_MEM_SPREAD flag usage
  ext4: verify s_clusters_per_group even without bigalloc
  ext4: fix corruption during on-line resize
  ext4: don't report EOPNOTSUPP errors from discard
  ext4: drop duplicate ea_inode handling in ext4_xattr_block_set()
  ext4: fold quota accounting into ext4_xattr_inode_lookup_create()
  ext4: correct best extent lstart adjustment logic
  ext4: forbid commit inconsistent quota data when errors=remount-ro
  ext4: add a hint for block bitmap corrupt state in mb_groups
  ext4: fix the comment of ext4_map_blocks()/ext4_ext_map_blocks()
  ext4: improve error msg for ext4_mb_seq_groups_show
  ext4: remove unused buddy_loaded in ext4_mb_seq_groups_show
  ext4: Add unit test for ext4_mb_mark_diskspace_used
  ext4: Add unit test for mb_free_blocks
  ...

Pull bcachefs updates from Kent Overstreet:

 - Subvolume children btree; this is needed for providing a userspace
   interface for walking subvolumes, which will come later

 - Lots of improvements to directory structure checking

 - Improved journal pipelining, significantly improving performance on
   high iodepth write workloads

 - Discard path improvements: the discard path is more efficient, and no
   longer flushes the journal unnecessarily

 - Buffered write path can now avoid taking the inode lock

 - new mm helper: memalloc_flags_{save|restore}

 - mempool now does kvmalloc mempools

* tag 'bcachefs-2024-03-13' of https://evilpiepirate.org/git/bcachefs: (128 commits)
  bcachefs: time_stats: shrink time_stat_buffer for better alignment
  bcachefs: time_stats: split stats-with-quantiles into a separate structure
  bcachefs: mean_and_variance: put struct mean_and_variance_weighted on a diet
  bcachefs: time_stats: add larger units
  bcachefs: pull out time_stats.[ch]
  bcachefs: reconstruct_alloc cleanup
  bcachefs: fix bch_folio_sector padding
  bcachefs: Fix btree key cache coherency during replay
  bcachefs: Always flush write buffer in delete_dead_inodes()
  bcachefs: Fix order of gc_done passes
  bcachefs: fix deletion of indirect extents in btree_gc
  bcachefs: Prefer struct_size over open coded arithmetic
  bcachefs: Kill unused flags argument to btree_split()
  bcachefs: Check for writing superblocks with nonsense member seq fields
  bcachefs: fix bch2_journal_buf_to_text()
  lib/generic-radix-tree.c: Make nodes more reasonably sized
  bcachefs: copy_(to|from)_user_errcode()
  bcachefs: Split out bkey_types.h
  bcachefs: fix lost journal buf wakeup due to improved pipelining
  bcachefs: intercept mountoption value for bool type
  ...

Raw NAND

The main series brought is an update of the Broadcom support to support
all BCMBCA SoCs and their specificity (ECC, write protection,
configuration straps), plus a few misc fixes and changes in the main
driver. Device tree updates are also part of this PR, initially because
of a misunderstanding on my side.

The STM32_FMC2 controller driver is also upgraded to properly support
MP1 and MP25 SoCs.

A new compatible is added for an Atmel flavor.

Among all these feature changes, there is as well a load of continuous
read related fixes, avoiding more corner conditions and clarifying the
logic. Finally a few miscellaneous fixes are made to the core, the
lpx32xx_mlc, fsl_lbc, Meson and Atmel controller driver, as well as
final one in the Hynix vendor driver.

SPI-NAND

The ESMT support has been extended to match 5 bytes ID to avoid
collisions. Winbond support on its side receives support for W25N04KV
chips.

$(shell ...) expands to the output of the command. It expands to the
empty string when the command does not print anything to stdout.
Hence, $(shell mkdir ...) is sufficient and does not need any
variable assignment in front of it.

Commit c2bd08ba ("treewide: remove meaningless assignments in
Makefiles", 2024-02-23) did this to all of tools/ but ignored in-flight
changes to tools/testing/selftests/kvm/Makefile, so reapply the change.

Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pick up documentation build fix for v6.9.

Merge tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-MM updates from Andrew Morton:

 - Kuan-Wei Chiu has developed the well-named series "lib min_heap: Min
   heap optimizations".

 - Kuan-Wei Chiu has also sped up the library sorting code in the series
   "lib/sort: Optimize the number of swaps and comparisons".

 - Alexey Gladkov has added the ability for code running within an IPC
   namespace to alter its IPC and MQ limits. The series is "Allow to
   change ipc/mq sysctls inside ipc namespace".

 - Geert Uytterhoeven has contributed some dhrystone maintenance work in
   the series "lib: dhry: miscellaneous cleanups".

 - Ryusuke Konishi continues nilfs2 maintenance work in the series

	"nilfs2: eliminate kmap and kmap_atomic calls"
	"nilfs2: fix kernel bug at submit_bh_wbc()"

 - Nathan Chancellor has updated our build tools requirements in the
   series "Bump the minimum supported version of LLVM to 13.0.1".

 - Muhammad Usama Anjum continues with the selftests maintenance work in
   the series "selftests/mm: Improve run_vmtests.sh".

 - Oleg Nesterov has done some maintenance work against the signal code
   in the series "get_signal: minor cleanups and fix".

Plus the usual shower of singleton patches in various parts of the tree.
Please see the individual changelogs for details.

* tag 'mm-nonmm-stable-2024-03-14-09-36' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
  nilfs2: prevent kernel bug at submit_bh_wbc()
  nilfs2: fix failure to detect DAT corruption in btree and direct mappings
  ocfs2: enable ocfs2_listxattr for special files
  ocfs2: remove SLAB_MEM_SPREAD flag usage
  assoc_array: fix the return value in assoc_array_insert_mid_shortcut()
  buildid: use kmap_local_page()
  watchdog/core: remove sysctl handlers from public header
  nilfs2: use div64_ul() instead of do_div()
  mul_u64_u64_div_u64: increase precision by conditionally swapping a and b
  kexec: copy only happens before uchunk goes to zero
  get_signal: don't initialize ksig->info if SIGNAL_GROUP_EXIT/group_exec_task
  get_signal: hide_si_addr_tag_bits: fix the usage of uninitialized ksig
  get_signal: don't abuse ksig->info.si_signo and ksig->sig
  const_structs.checkpatch: add device_type
  Normalise "name (ad@dr)" MODULE_AUTHORs to "name <ad@dr>"
  dyndbg: replace kstrdup() + strchr() with kstrdup_and_replace()
  list: leverage list_is_head() for list_entry_is_head()
  nilfs2: MAINTAINERS: drop unreachable project mirror site
  smp: make __smp_processor_id() 0-argument macro
  fat: fix uninitialized field in nostale filehandles
  ...

Pull MM updates from Andrew Morton:

 - Sumanth Korikkar has taught s390 to allocate hotplug-time page frames
   from hotplugged memory rather than only from main memory. Series
   "implement "memmap on memory" feature on s390".

 - More folio conversions from Matthew Wilcox in the series

	"Convert memcontrol charge moving to use folios"
	"mm: convert mm counter to take a folio"

 - Chengming Zhou has optimized zswap's rbtree locking, providing
   significant reductions in system time and modest but measurable
   reductions in overall runtimes. The series is "mm/zswap: optimize the
   scalability of zswap rb-tree".

 - Chengming Zhou has also provided the series "mm/zswap: optimize zswap
   lru list" which provides measurable runtime benefits in some
   swap-intensive situations.

 - And Chengming Zhou further optimizes zswap in the series "mm/zswap:
   optimize for dynamic zswap_pools". Measured improvements are modest.

 - zswap cleanups and simplifications from Yosry Ahmed in the series
   "mm: zswap: simplify zswap_swapoff()".

 - In the series "Add DAX ABI for memmap_on_memory", Vishal Verma has
   contributed several DAX cleanups as well as adding a sysfs tunable to
   control the memmap_on_memory setting when the dax device is
   hotplugged as system memory.

 - Johannes Weiner has added the large series "mm: zswap: cleanups",
   which does that.

 - More DAMON work from SeongJae Park in the series

	"mm/damon: make DAMON debugfs interface deprecation unignorable"
	"selftests/damon: add more tests for core functionalities and corner cases"
	"Docs/mm/damon: misc readability improvements"
	"mm/damon: let DAMOS feeds and tame/auto-tune itself"

 - In the series "mm/mempolicy: weighted interleave mempolicy and sysfs
   extension" Rakie Kim has developed a new mempolicy interleaving
   policy wherein we allocate memory across nodes in a weighted fashion
   rather than uniformly. This is beneficial in heterogeneous memory
   environments appearing with CXL.

 - Christophe Leroy has contributed some cleanup and consolidation work
   against the ARM pagetable dumping code in the series "mm: ptdump:
   Refactor CONFIG_DEBUG_WX and check_wx_pages debugfs attribute".

 - Luis Chamberlain has added some additional xarray selftesting in the
   series "test_xarray: advanced API multi-index tests".

 - Muhammad Usama Anjum has reworked the selftest code to make its
   human-readable output conform to the TAP ("Test Anything Protocol")
   format. Amongst other things, this opens up the use of third-party
   tools to parse and process out selftesting results.

 - Ryan Roberts has added fork()-time PTE batching of THP ptes in the
   series "mm/memory: optimize fork() with PTE-mapped THP". Mainly
   targeted at arm64, this significantly speeds up fork() when the
   process has a large number of pte-mapped folios.

 - David Hildenbrand also gets in on the THP pte batching game in his
   series "mm/memory: optimize unmap/zap with PTE-mapped THP". It
   implements batching during munmap() and other pte teardown
   situations. The microbenchmark improvements are nice.

 - And in the series "Transparent Contiguous PTEs for User Mappings"
   Ryan Roberts further utilizes arm's pte's contiguous bit ("contpte
   mappings"). Kernel build times on arm64 improved nicely. Ryan's
   series "Address some contpte nits" provides some followup work.

 - In the series "mm/hugetlb: Restore the reservation" Breno Leitao has
   fixed an obscure hugetlb race which was causing unnecessary page
   faults. He has also added a reproducer under the selftest code.

 - In the series "selftests/mm: Output cleanups for the compaction
   test", Mark Brown did what the title claims.

 - Kinsey Ho has added the series "mm/mglru: code cleanup and
   refactoring".

 - Even more zswap material from Nhat Pham. The series "fix and extend
   zswap kselftests" does as claimed.

 - In the series "Introduce cpu_dcache_is_aliasing() to fix DAX
   regression" Mathieu Desnoyers has cleaned up and fixed rather a mess
   in our handling of DAX on archiecctures which have virtually aliasing
   data caches. The arm architecture is the main beneficiary.

 - Lokesh Gidra's series "per-vma locks in userfaultfd" provides
   dramatic improvements in worst-case mmap_lock hold times during
   certain userfaultfd operations.

 - Some page_owner enhancements and maintenance work from Oscar Salvador
   in his series

	"page_owner: print stacks and their outstanding allocations"
	"page_owner: Fixup and cleanup"

 - Uladzislau Rezki has contributed some vmalloc scalability
   improvements in his series "Mitigate a vmap lock contention". It
   realizes a 12x improvement for a certain microbenchmark.

 - Some kexec/crash cleanup work from Baoquan He in the series "Split
   crash out from kexec and clean up related config items".

 - Some zsmalloc maintenance work from Chengming Zhou in the series

	"mm/zsmalloc: fix and optimize objects/page migration"
	"mm/zsmalloc: some cleanup for get/set_zspage_mapping()"

 - Zi Yan has taught the MM to perform compaction on folios larger than
   order=0. This a step along the path to implementaton of the merging
   of large anonymous folios. The series is named "Enable >0 order folio
   memory compaction".

 - Christoph Hellwig has done quite a lot of cleanup work in the
   pagecache writeback code in his series "convert write_cache_pages()
   to an iterator".

 - Some modest hugetlb cleanups and speedups in Vishal Moola's series
   "Handle hugetlb faults under the VMA lock".

 - Zi Yan has changed the page splitting code so we can split huge pages
   into sizes other than order-0 to better utilize large folios. The
   series is named "Split a folio to any lower order folios".

 - David Hildenbrand has contributed the series "mm: remove
   total_mapcount()", a cleanup.

 - Matthew Wilcox has sought to improve the performance of bulk memory
   freeing in his series "Rearrange batched folio freeing".

 - Gang Li's series "hugetlb: parallelize hugetlb page init on boot"
   provides large improvements in bootup times on large machines which
   are configured to use large numbers of hugetlb pages.

 - Matthew Wilcox's series "PageFlags cleanups" does that.

 - Qi Zheng's series "minor fixes and supplement for ptdesc" does that
   also. S390 is affected.

 - Cleanups to our pagemap utility functions from Peter Xu in his series
   "mm/treewide: Replace pXd_large() with pXd_leaf()".

 - Nico Pache has fixed a few things with our hugepage selftests in his
   series "selftests/mm: Improve Hugepage Test Handling in MM
   Selftests".

 - Also, of course, many singleton patches to many things. Please see
   the individual changelogs for details.

* tag 'mm-stable-2024-03-13-20-04' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (435 commits)
  mm/zswap: remove the memcpy if acomp is not sleepable
  crypto: introduce: acomp_is_async to expose if comp drivers might sleep
  memtest: use {READ,WRITE}_ONCE in memory scanning
  mm: prohibit the last subpage from reusing the entire large folio
  mm: recover pud_leaf() definitions in nopmd case
  selftests/mm: skip the hugetlb-madvise tests on unmet hugepage requirements
  selftests/mm: skip uffd hugetlb tests with insufficient hugepages
  selftests/mm: dont fail testsuite due to a lack of hugepages
  mm/huge_memory: skip invalid debugfs new_order input for folio split
  mm/huge_memory: check new folio order when split a folio
  mm, vmscan: retry kswapd's priority loop with cache_trim_mode off on failure
  mm: add an explicit smp_wmb() to UFFDIO_CONTINUE
  mm: fix list corruption in put_pages_list
  mm: remove folio from deferred split list before uncharging it
  filemap: avoid unnecessary major faults in filemap_fault()
  mm,page_owner: drop unnecessary check
  mm,page_owner: check for null stack_record before bumping its refcount
  mm: swap: fix race between free_swap_and_cache() and swapoff()
  mm/treewide: align up pXd_leaf() retval across archs
  mm/treewide: drop pXd_large()
  ...

Stephen reported that an htmldocs build hit:

   Documentation/ABI/testing/debugfs-cxl:38: ERROR: Unexpected indentation.

It turns out that line was fine but the tool was unhappy about some line
breaks in the table of values to error types.

It turns out that:

   make V=1 SPHINXDIRS="admin-guide" htmldocs

...can not be used to get more info about what is behind a documentation
build error. It was only pure luck that reflowing the text resulted in
an error message that seemed a imply a problem later on with line breaks
around the table.

Fixes: 8039804c ("cxl/core: Add CXL EINJ debugfs files")
Cc: Jonathan Corbet <corbet@lwn.net>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: http://lore.kernel.org/r/20240314141313.7ba04aff@canb.auug.org.au
Cc: Ben Cheatham <Benjamin.Cheatham@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Merge tag 'perf-tools-for-v6.9-2024-03-13' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools updates from Namhyung Kim:
 "perf stat:

   - Support new 'cluster' aggregation mode for shared resources
     depending on the hardware configuration:

        $ sudo perf stat -a --per-cluster -e cycles,instructions sleep 1

         Performance counter stats for 'system wide':

        S0-D0-CLS0    2         85,051,822      cycles
        S0-D0-CLS0    2         73,909,908      instructions      #    0.87  insn per cycle
        S0-D0-CLS2    2         93,365,918      cycles
        S0-D0-CLS2    2         83,006,158      instructions      #    0.89  insn per cycle
        S0-D0-CLS4    2        104,157,523      cycles
        S0-D0-CLS4    2         53,234,396      instructions      #    0.51  insn per cycle
        S0-D0-CLS6    2         65,891,079      cycles
        S0-D0-CLS6    2         41,478,273      instructions      #    0.63  insn per cycle

               1.002407989 seconds time elapsed

   - Various fixes and cleanups for event metrics including NaN handling

  perf script:

   - Use libcapstone if available to disassemble the instructions. This
     enables 'perf script -F disasm' and 'perf script --insn-trace=disasm'
     (for Intel-PT):

        $ perf script -F event,ip,disasm
        cycles:P:  ffffffffa988d428             wrmsr
        cycles:P:  ffffffffa9839d25             movq %rax, %r14
        cycles:P:  ffffffffa9cdcaf0             endbr64
        cycles:P:  ffffffffa988d428             wrmsr
        cycles:P:  ffffffffa988d428             wrmsr
        cycles:P:  ffffffffaa401f86             iretq
        cycles:P:  ffffffffa99c4de5             movq 0x30(%rcx), %r8
        cycles:P:  ffffffffa988d428             wrmsr
        cycles:P:  ffffffffaa401f86             iretq
        cycles:P:  ffffffffa9907983             movl 0x68(%rbx), %eax
        cycles:P:  ffffffffa988d428             wrmsr

   - Expose sample ID / stream ID to python scripts

  perf test:

   - Add more perf test cases from Redhat internal test suites. This
     time it adds the base infra and a few perf probe tests. More to
     come. :)

   - Add 'perf test -p' for parallel execution and fix some issues found
     by the parallel test

   - Support symbol test to print symbols in given (active) module:

        $ perf test -F -v Symbols --dso /lib/modules/$(uname -r)/kernel/fs/ext4/ext4.ko
        --- start ---
        Testing /lib/modules/6.5.13-1rodete2-amd64/kernel/fs/ext4/ext4.ko
        Overlapping symbols:
         7a990-7a9a0 l __pfx_ext4_exit_fs
         7a990-7a9a0 g __pfx_cleanup_module
        Overlapping symbols:
         7a9a0-7aa1c l ext4_exit_fs
         7a9a0-7aa1c g cleanup_module
        ...

  JSON metric updates:

   - A new round of Intel metric updates

   - Support Power11 PVR (compatible to Power10)

   - Fix cache latency events on Zen 4 to set SliceId properly

  Internal:

   - Fix reference counting for 'map' data structure, tireless work from
     Ian!

   - More memory optimization for struct thread and annotate histogram.
     Now, 'perf report' (TUI) and 'perf annotate' should be much
     lighter-weight in terms of memory footprint

   - Support cross-arch perf register access. Clean up the build
     configuration so that it can detect arch-register support at
     runtime. This can allow to parse register data in sample which was
     recorded in a different arch

  Others:

   - Sync task state in 'perf sched' to kernel using trace event fields.
     The task states have been changed so tools cannot assume a fixed
     encoding

   - Clean up 'perf mem' to generalize the arch-specific events

   - Add support for local and global variables to data type profiling.
     This would increase the success rate of type resolution with DWARF

   - Add short option -H for --hierarchy in 'perf report' and 'perf top'"

* tag 'perf-tools-for-v6.9-2024-03-13' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (154 commits)
  perf annotate: Add comments in the data structures
  perf annotate: Remove sym_hist.addr[] array
  perf annotate: Calculate instruction overhead using hashmap
  perf annotate: Add a hashmap for symbol histogram
  perf threads: Reduce table size from 256 to 8
  perf threads: Switch from rbtree to hashmap
  perf threads: Move threads to its own files
  perf machine: Move machine's threads into its own abstraction
  perf machine: Move fprintf to for_each loop and a callback
  perf trace: Ignore thread hashing in summary
  perf report: Sort child tasks by tid
  perf vendor events amd: Fix Zen 4 cache latency events
  perf version: Display availability of OpenCSD support
  perf vendor events intel: Add umasks/occ_sel to PCU events.
  perf map: Fix map reference count issues
  libperf evlist: Avoid out-of-bounds access
  perf lock contention: Account contending locks too
  perf metrics: Fix segv for metrics with no events
  perf metrics: Fix metric matching
  perf pmu: Fix a potential memory leak in perf_pmu__lookup()
  ...

Merge tag 'trace-ring-buffer-v6.8-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing updates from Steven Rostedt:

 - Do not update shortest_full in rb_watermark_hit() if the watermark is
   hit. The shortest_full field was being updated regardless if the task
   was going to wait or not. If the watermark is hit, then the task is
   not going to wait, so do not update the shortest_full field (used by
   the waker).

 - Update shortest_full field before setting the full_waiters_pending
   flag

   In the poll logic, the full_waiters_pending flag was being set before
   the shortest_full field was set. If the full_waiters_pending flag is
   set, writers will check the shortest_full field which has the least
   percentage of data that the ring buffer needs to be filled before
   waking up. The writer will check shortest_full if
   full_waiters_pending is set, and if the ring buffer percentage filled
   is greater than shortest full, then it will call the irq_work to wake
   up the waiters.

   The problem was that the poll logic set the full_waiters_pending flag
   before updating shortest_full, which when zero will always trigger
   the writer to call the irq_work to wake up the waiters. The irq_work
   will reset the shortest_full field back to zero as the woken waiters
   is suppose to reset it.

 - There's some optimized logic in the rb_watermark_hit() that is used
   in ring_buffer_wait(). Use that helper function in the poll logic as
   well.

 - Restructure ring_buffer_wait() to use wait_event_interruptible()

   The logic to wake up pending readers when the file descriptor is
   closed is racy. Restructure ring_buffer_wait() to allow callers to
   pass in conditions besides the ring buffer having enough data in it
   by using wait_event_interruptible().

 - Update the tracing_wait_on_pipe() to call ring_buffer_wait() with its
   own conditions to exit the wait loop.

* tag 'trace-ring-buffer-v6.8-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/ring-buffer: Fix wait_on_pipe() race
  ring-buffer: Use wait_event_interruptible() in ring_buffer_wait()
  ring-buffer: Reuse rb_watermark_hit() for the poll logic
  ring-buffer: Fix full_waiters_pending in poll
  ring-buffer: Do not set shortest_full when full target is hit

Pull probes updates from Masami Hiramatsu:
 "x86 kprobes:

   - Use boolean for some function return instead of 0 and 1

   - Prohibit probing on INT/UD. This prevents user to put kprobe on
     INTn/INT1/INT3/INTO and UD0/UD1/UD2 because these are used for a
     special purpose in the kernel

   - Boost Grp instructions. Because a few percent of kernel
     instructions are Grp 2/3/4/5 and those are safe to be executed
     without ip register fixup, allow those to be boosted (direct
     execution on the trampoline buffer with a JMP)

  tracing:

   - Add function argument access from return events (kretprobe and
     fprobe). This allows user to compare how a data structure field is
     changed after executing a function. With BTF, return event also
     accepts function argument access by name.

   - Fix a wrong comment (using "Kretprobe" in fprobe)

   - Cleanup a big probe argument parser function into three parts, type
     parser, post-processing function, and main parser

   - Cleanup to set nr_args field when initializing trace_probe instead
     of counting up it while parsing

   - Cleanup a redundant #else block from tracefs/README source code

   - Update selftests to check entry argument access from return probes

   - Documentation update about entry argument access from return
     probes"

* tag 'probes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  Documentation: tracing: Add entry argument access at function exit
  selftests/ftrace: Add test cases for entry args at function exit
  tracing/probes: Support $argN in return probe (kprobe and fprobe)
  tracing: Remove redundant #else block for BTF args from README
  tracing/probes: cleanup: Set trace_probe::nr_args at trace_probe_init
  tracing/probes: Cleanup probe argument parser
  tracing/fprobe-event: cleanup: Fix a wrong comment in fprobe event
  x86/kprobes: Boost more instructions from grp2/3/4/5
  x86/kprobes: Prohibit kprobing on INT and UD
  x86/kprobes: Refactor can_{probe,boost} return type to bool

Pull lsm fixes from Paul Moore:
 "Two fixes to address issues with the LSM syscalls that we shipped in
  Linux v6.8. The first patch might be a bit controversial, but the
  second is a rather straightforward fix; more on both below.

  The first fix from Casey addresses a problem that should have been
  caught during the ~16 month (?) review cycle, but sadly was not. The
  good news is that Dmitry caught it very quickly once Linux v6.8 was
  released. The core issue is the use of size_t parameters to pass
  buffer sizes back and forth in the syscall; while we could have solved
  this with a compat syscall definition, given the newness of the
  syscalls I wanted to attempt to just redefine the size_t parameters as
  u32 types and avoid the work associated with a set of compat syscalls.

  However, this is technically a change in the syscall's signature/API
  so I can understand if you're opposed to this, even if the syscalls
  are less than a week old.

   [ Fingers crossed nobody even notices - Linus ]

  The second fix is a rather trivial fix to allow userspace to call into
  the lsm_get_self_attr() syscall with a NULL buffer to quickly
  determine a minimum required size for the buffer. We do have
  kselftests for this very case, I'm not sure why I didn't notice the
  failure; I'm going to guess stupidity, tired eyes, I dunno. My
  apologies we didn't catch this earlier"

* tag 'lsm-pr-20240314' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  lsm: handle the NULL buffer case in lsm_fill_user_ctx()
  lsm: use 32-bit compatible data types in LSM syscalls

The cont_read.ongoing flag should only be enabled at the beginning of a
read operation, and also disabled at its end, so we never end up
triggering nasty side effects outside of this scope. The mtd core being
highly serialized, we should not be bothered by parallel accesses
anyway.

In case we reach the end of a read operation and the boolean was not
properly disabled, it's a bug, but it's totally manageable. So warn, and
then fix the boolean state.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240307115315.1942678-2-miquel.raynal@bootlin.com

As a matter of fact, continuous reads require additional handling at the
operation level in order for them to work properly. The core helpers do
have this additional logic now, but any time a controller implements its
own page helper, this extra logic is "lost". This means we need another
level of per-controller driver checks to ensure they can leverage
continuous reads. This is for now unsupported, so in order to ensure
continuous reads are enabled only when fully using the core page
helpers, we need to add more initial checks.

Also, as performance is not relevant during raw accesses, we also
prevent these from enabling the feature.

This should solve the issue seen with controllers such as the STM32 FMC2
when in sequencer mode. In this case, the continuous read feature would
be enabled but not leveraged, and most importantly not disabled, leading
to further operations to fail.
Reported-by: Christophe Kerello <christophe.kerello@foss.st.com>
Fixes: 003fe4b9 ("mtd: rawnand: Support for sequential cache reads")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Christophe Kerello <christophe.kerello@foss.st.com>
Link: https://lore.kernel.org/linux-mtd/20240307115315.1942678-1-miquel.raynal@bootlin.com

BCMBCA broadband SoC based board design does not specify ecc setting in
dts but rather use the SoC NAND strap info to obtain the ecc strength
and spare area size setting. Add brcm,nand-ecc-use-strap dts propety for
this purpose and update driver to support this option. However these two
options can not be used at the same time.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: David Regan <dregan@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240301173308.226004-1-william.zhang@broadcom.com

Fix the following sparse warnings:
sparse warnings: (new ones prefixed by >>)
>> drivers/mtd/nand/raw/brcmnand/bcmbca_nand.c:79:41: sparse: sparse:
cast removes address space '__iomem' of expression
   drivers/mtd/nand/raw/brcmnand/bcmbca_nand.c:80:17: sparse: sparse:
cast removes address space '__iomem' of expression
   drivers/mtd/nand/raw/brcmnand/bcmbca_nand.c:80:17: sparse: sparse:
cast removes address space '__iomem' of expression
   drivers/mtd/nand/raw/brcmnand/bcmbca_nand.c:80:17: sparse: sparse:
cast removes address space '__iomem' of expression

Fixes: c52c16d1bee5 ("mtd: rawnand: brcmnand: Add BCMBCA read data bus interface")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402270940.gmVLVRg0-lkp@intel.com/Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240227190258.200929-1-william.zhang@broadcom.com

Looks like a copy'n'paste mistake introduced when initially adding the
dynamic timings feature with commit f9ce2edd ("mtd: nand: atmel: Add
->setup_data_interface() hooks").  The context around this and
especially the code itself suggests 'read' is meant instead of write.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240226122537.75097-1-ada@thorsis.com

While crossing a LUN boundary, it is probably safer (and clearer) to
keep all members of the continuous read structure aligned, including the
pause page (which is the last page of the lun or the last page of the
continuous read). Once these members properly in sync, we can use the
rawnand_cap_cont_reads() helper everywhere to "prepare" the next
continuous read if there is one.

Fixes: bbcd80f5 ("mtd: rawnand: Prevent crossing LUN boundaries during sequential reads")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240223115545.354541-4-miquel.raynal@bootlin.com

For LUN crossing boundaries, it is handy to know what is the index of
the last page in a LUN. This helper will soon be reused. At the same
time I rename page_per_lun to ppl in the calling function to clarify the
lines.

Cc: stable@vger.kernel.org # v6.7
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20240223115545.354541-3-miquel.raynal@bootlin.com