Merge tag 'qcom-drivers-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers

Qualcomm driver updates for v6.10

The Qualcomm SCM driver initialization order is improved, to avoid any
potential for a client to find a half-initialized SCM instance.
The handling of download mode bits is updated to not attempt
QCOM_SCM_BOOT_SET_DLOAD_MODE if a io-address for the update is
specified, and that path is changed to perform a read-modify-write to
avoid updating unrelated bits.  Error handling is corrected in the
peripheral authentication service (PAS) functions, to release
interconnect bandwidth votes in the case of an error. An unwanted error
print on allocation error is also removed from this code path.

The QSEECOM allow list is marked __maybe_unused to avoid build warnings
when built with !OF. The error handling related to the interconnect API
is cleaned up to avoid handling the impossible IS_ERR() condition.

initcall level is bumped to "core" for cmd-db and rpmh-rsc, as dependent
drivers like regulators, interconnects and clocks are registered at this
level.

Another attempt is made to remove the strncpy() usage in cmd-db, this
time with strtomem_pad() which has the correct characteristics.

The bwmon regmap cache is changed to maple tree.

After an attempt to add missing MODULE_DEVICE_TABLEs to debug drivers,
the intention of not having them automatically load is documented.

Operations on the pmic_glink client list is put under mutual exclusion,
to avoid races when clients are being registered. pmic_glink client
registered after the firmware notification arrived was not informed that
the firmware was up, this is resolved.

More DSPs and the apss subsystem is added to the Qualcomm sleep stats driver.

Checks for in-flight regulator requests in the RPMh RSC driver is
improved to deal with the fact that these occupy multiple registers, so
it's insufficient to just to direct address comparison.

The socinfo drivers learns about X1 Elite and SMB2360 PMIC.

The maintainers entry is split between the linux-arm-msm list and
subset that is maintained in the qcom-soc tree, to avoid some confusion
about maintainership.

* tag 'qcom-drivers-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (21 commits)
  soc: qcom: cmd-db: replace deprecated strncpy with strtomem
  soc: qcom: rpmh-rsc: Enhance check for VRM in-flight request
  firmware: qcom: scm: Modify only the download bits in TCSR register
  firmware: qcom: scm: Fix __scm and waitq completion variable initialization
  firmware: qcom: scm: Rework dload mode availability check
  firmware: qcom: scm: Remove redundant scm argument from qcom_scm_waitq_wakeup()
  firmware: qcom: scm: Remove log reporting memory allocation failure
  soc: qcom: pmic_glink: notify clients about the current state
  soc: qcom: pmic_glink: don't traverse clients list without a lock
  soc: qcom: mention intentionally broken module autoloading
  firmware: qcom: qcm: fix unused qcom_scm_qseecom_allowlist
  MAINTAINERS: Split Qualcomm SoC and linux-arm-msm entries
  soc: qcom: qcom_stats: Add DSPs and apss subsystem stats
  dt-bindings: soc: qcom: qcom,pmic-glink: document QCM6490 compatible
  soc: qcom: socinfo: Add SMB2360 PMIC
  soc: qcom: socinfo: Add X1E80100 SoC ID table entry
  dt-bindings: arm: qcom,ids: Add SoC ID for X1E80100
  soc: qcom: Update init level to core_initcall() for cmd-db and rpmh-rsc
  soc: qcom: icc-bwmon: Convert to use maple tree register cache
  firmware: qcom_scm: remove IS_ERR() checks from qcom_scm_bw_{en,dis}able()
  ...

Link: https://lore.kernel.org/r/20240427160917.1431354-1-andersson@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-6.10-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers

soc/tegra: Changes for v6.10-rc1

This contains a single commit that adds a wake event for Ethernet for
some devices.

* tag 'tegra-for-6.10-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234

Link: https://lore.kernel.org/r/20240426180519.3972626-1-thierry.reding@gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'stm32-bus-firewall-for-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/drivers

STM32 Firewall bus for v6.10, round 1

Highlights:
---------

Introduce STM32 Firewall framework for STM32MP1x and STM32MP2x
platforms. STM32MP1x(ETZPC) and STM32MP2x(RIFSC) Firewall controllers
register to the framework to offer firewall services such as access
granting.

This series of patches is a new approach on the previous STM32 system
bus, history is available here:
https://lore.kernel.org/lkml/20230127164040.1047583/

The need for such framework arises from the fact that there are now
multiple hardware firewalls implemented across multiple products.
Drivers are shared between different products, using the same code.
When it comes to firewalls, the purpose mostly stays the same: Protect
hardware resources. But the implementation differs, and there are
multiple types of firewalls: peripheral, memory, ...

Some hardware firewall controllers such as the RIFSC implemented on
STM32MP2x platforms may require to take ownership of a resource before
being able to use it, hence the requirement for firewall services to
take/release the ownership of such resources.

On the other hand, hardware firewall configurations are becoming
more and more complex. These mecanisms prevent platform crashes
or other firewall-related incoveniences by denying access to some
resources.

The stm32 firewall framework offers an API that is defined in
firewall controllers drivers to best fit the specificity of each
firewall.

For every peripherals protected by either the ETZPC or the RIFSC, the
firewall framework checks the firewall controlelr registers to see if
the peripheral's access is granted to the Linux kernel. If not, the
peripheral is configured as secure, the node is marked populated,
so that the driver is not probed for that device.

The firewall framework relies on the access-controller device tree
binding. It is used by peripherals to reference a domain access
controller. In this case a firewall controller. The bus uses the ID
referenced by the access-controller property to know where to look
in the firewall to get the security configuration for the peripheral.
This allows a device tree description rather than a hardcoded peripheral
table in the bus driver.

The STM32 ETZPC device is responsible for filtering accesses based on
security level, or co-processor isolation for any resource connected
to it.

The RIFSC is responsible for filtering accesses based on Compartment
ID / security level / privilege level for any resource connected to
it.

* tag 'stm32-bus-firewall-for-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
  bus: etzpc: introduce ETZPC firewall controller driver
  bus: rifsc: introduce RIFSC firewall controller driver
  of: property: fw_devlink: Add support for "access-controller"
  firewall: introduce stm32_firewall framework
  dt-bindings: bus: document ETZPC
  dt-bindings: bus: document RIFSC
  dt-bindings: treewide: add access-controllers description
  dt-bindings: document generic access controllers

Link: https://lore.kernel.org/r/7dc64226-5429-4ab7-a8c8-6053b12e3cf5@foss.st.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

HiSilicon driver updates for v6.10

- Add the check for obtaining complete port attribute in the HCCS driver
- Replace MAILBOX dependency with PCC for the HCCS driver

* tag 'hisi-drivers-for-6.10' of https://github.com/hisilicon/linux-hisi:
  soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC
  soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute

Link: https://lore.kernel.org/r/662A3EDE.5070708@hisilicon.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-drivers-for-v6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/drivers

Renesas driver updates for v6.10

  - Identify the new RZ/V2H (R9A09G057) SoC,
  - Enable support for the TMU (Timer Unit) on R-Car Gen2 SoCs.

* tag 'renesas-drivers-for-v6.10-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  soc: renesas: Enable TMU support on R-Car Gen2
  soc: renesas: Add identification support for RZ/V2H SoC

Link: https://lore.kernel.org/r/cover.1712915532.git.geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Add the wake event for the EQOS ethernet controller on Tegra194 and
Tegra234 devices, so that system can be woken up by an event from this
ethernet controller.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

The "nb_firewall" variable is the number of elements in the firewall[]
array, which is allocated in stm32_firewall_populate_bus().  So change
this > comparison to >= to prevent an out of bound access.

Fixes: 5c9668cf ("firewall: introduce stm32_firewall framework")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

ETZPC is a peripheral and memory firewall controller that filter accesses
based on Arm TrustZone secure state and Arm CPU privilege execution level.
It handles MCU isolation as well.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

The kunpeng_hccs driver depends on the Platform Communication Channel
Driver. If the PCC driver is not enabled, this driver will be failed
to probe. And since the PCC driver depends on the MAILBOX, replace
the MAILBOX dependency with the PCC.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

The hccs_get_all_port_attr() is used to obtain the attribute of all the
ports on a specified DIE from the firmware. However this interface doesn't
ensure whether the firmware reports the complete attribute of all the ports
or not. So this patch adds the check for this.
Signed-off-by: Huisong Li <lihuisong@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

RIFSC is a peripheral firewall controller that filter accesses based on
Arm TrustZone secure state, Arm CPU privilege execution level and
Compartment IDentification of the STM32 SoC subsystems.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

Allows tracking dependencies between devices and their access
controller.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

strncpy() is an ambiguous and potentially dangerous interface [1]. We
should prefer more robust and less ambiguous alternatives.

@query is marked as __nonstring and doesn't need to be NUL-terminated.

Since we are doing a string to memory copy, we can use the aptly named
"strtomem" -- specifically, the "pad" variant to also ensure NUL-padding
throughout the destination buffer.

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240319-strncpy-drivers-soc-qcom-cmd-db-c-v3-1-aeb5c5180c32@google.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Each RPMh VRM accelerator resource has 3 or 4 contiguous 4-byte aligned
addresses associated with it. These control voltage, enable state, mode,
and in legacy targets, voltage headroom. The current in-flight request
checking logic looks for exact address matches. Requests for different
addresses of the same RPMh resource as thus not detected as in-flight.

Add new cmd-db API cmd_db_match_resource_addr() to enhance the in-flight
request check for VRM requests by ignoring the address offset.

This ensures that only one request is allowed to be in-flight for a given
VRM resource. This is needed to avoid scenarios where request commands are
carried out by RPMh hardware out-of-order leading to LDO regulator
over-current protection triggering.

Fixes: 658628e7 ("drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs")
Cc: stable@vger.kernel.org
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Elliot Berman <quic_eberman@quicinc.com> # sm8650-qrd
Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Link: https://lore.kernel.org/r/20240215-rpmh-rsc-fixes-v4-1-9cbddfcba05b@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Crashdump collection is done based on DLOAD bits of TCSR register.
To retain other bits, scm driver need to read the register and
modify only the DLOAD bits, as other bits in TCSR may have their
own significance.
Co-developed-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
Signed-off-by: Poovendhan Selvaraj <quic_poovendh@quicinc.com>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Tested-by: Kathiravan Thirumoorthy <quic_kathirav@quicinc.com> # IPQ9574 and IPQ5332
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/1711042655-31948-1-git-send-email-quic_mojha@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

It is possible qcom_scm_is_available() gives wrong indication that
if __scm is initialized while __scm->dev is not and similar issue
is also possible with __scm->waitq_comp.

Fix this appropriately by the use of release barrier and read barrier
that will make sure if __scm is initialized so, is all of its field
variable.

Fixes: d0f6fa7b ("firmware: qcom: scm: Convert SCM to platform driver")
Fixes: 6bf32599 ("firmware: qcom: scm: Add wait-queue handling logic")
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Link: https://lore.kernel.org/r/1711034642-22860-4-git-send-email-quic_mojha@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

QCOM_SCM_BOOT_SET_DLOAD_MODE scm command is applicable for very
older SoCs where this command is supported from firmware and
for newer SoCs, dload mode tcsr registers is used for setting
the download mode.

Currently, qcom_scm_set_download_mode() checks for availability
of QCOM_SCM_BOOT_SET_DLOAD_MODE command even for SoCs where this
is not used. Fix this by switching the condition to keep the
command availability check only if dload mode registers are not
available.
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/1711034642-22860-3-git-send-email-quic_mojha@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Remove redundant scm argument from qcom_scm_waitq_wakeup().
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/1711034642-22860-2-git-send-email-quic_mojha@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Remove redundant memory allocation failure.

WARNING: Possible unnecessary 'out of memory' message
+       if (!mdata_buf) {
+               dev_err(__scm->dev, "Allocation of metadata buffer failed.\n");
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/1711034642-22860-1-git-send-email-quic_mojha@quicinc.comSigned-off-by: Bjorn Andersson <andersson@kernel.org>

In case the client is registered after the pmic-glink recived a response
from the Protection Domain mapper, it is going to miss the notification
about the state. Notify clients about the current state upon
registration.

Fixes: 58ef4ece ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Tested-by: Xilin Wu <wuxilin123@gmail.com> # on QCS8550 AYN Odin 2
Link: https://lore.kernel.org/r/20240403-pmic-glink-fix-clients-v2-2-aed4e02baacc@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Take the client_lock before traversing the clients list at the
pmic_glink_state_notify_clients() function. This is required to keep the
list traversal safe from concurrent modification.

Fixes: 58ef4ece ("soc: qcom: pmic_glink: Introduce base PMIC GLINK driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Tested-by: Xilin Wu <wuxilin123@gmail.com> # on QCS8550 AYN Odin 2
Link: https://lore.kernel.org/r/20240403-pmic-glink-fix-clients-v2-1-aed4e02baacc@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Qualcomm PMIC ChargerPD ULOG and RPM Master Statistics drivers are
solely for debugging purposes and should not be autoloaded as modules.
Add comments to annotate missing MODULE_DEVICE_TABLE.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240410184522.271889-1-krzk@kernel.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

Pull x86 fixes from Ingo Molnar:

 - Fix MCE timer reinit locking

 - Fix/improve CoCo guest random entropy pool init

 - Fix SEV-SNP late disable bugs

 - Fix false positive objtool build warning

 - Fix header dependency bug

 - Fix resctrl CPU offlining bug

* tag 'x86-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/retpoline: Add NOENDBR annotation to the SRSO dummy return thunk
  x86/mce: Make sure to grab mce_sysfs_mutex in set_bank()
  x86/CPU/AMD: Track SNP host status with cc_platform_*()
  x86/cc: Add cc_platform_set/_clear() helpers
  x86/kvm/Kconfig: Have KVM_AMD_SEV select ARCH_HAS_CC_PLATFORM
  x86/coco: Require seeding RNG with RDRAND on CoCo systems
  x86/numa/32: Include missing <asm/pgtable_areas.h>
  x86/resctrl: Fix uninitialized memory read when last CPU of domain goes offline

Pull timer fixes from Ingo Molnar:
 "Fix various timer bugs:

   - Fix a timer migration bug that may result in missed events

   - Fix timer migration group hierarchy event updates

   - Fix a PowerPC64 build warning

   - Fix a handful of DocBook annotation bugs"

* tag 'timers-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers/migration: Return early on deactivation
  timers/migration: Fix ignored event due to missing CPU update
  vdso: Use CONFIG_PAGE_SHIFT in vdso/datapage.h
  timers: Fix text inconsistencies and spelling
  tick/sched: Fix struct tick_sched doc warnings
  tick/sched: Fix various kernel-doc warnings
  timers: Fix kernel-doc format and add Return values
  time/timekeeping: Fix kernel-doc warnings and typos
  time/timecounter: Fix inline documentation

Pull x86 perf fix from Ingo Molnar:
 "Fix a combined PEBS events bug on x86 Intel CPUs"

* tag 'perf-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/ds: Don't clear ->pebs_data_cfg for the last PEBS event

Pull nfsd fixes from Chuck Lever:

 - Address a slow memory leak with RPC-over-TCP

 - Prevent another NFS4ERR_DELAY loop during CREATE_SESSION

* tag 'nfsd-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  nfsd: hold a lighter-weight client reference over CB_RECALL_ANY
  SUNRPC: Fix a slow server-side memory leak with RPC-over-TCP

Pull i2c fix from Wolfram Sang:
 "A host driver build fix"

* tag 'i2c-for-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: pxa: hide unused icr_bits[] variable

Pull xfs fix from Chandan Babu:

 - Allow creating new links to special files which were not associated
   with a project quota

* tag 'xfs-6.9-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: allow cross-linking special files without project quota

Pull smb client fixes from Steve French:

 - fix to retry close to avoid potential handle leaks when server
   returns EBUSY

 - DFS fixes including a fix for potential use after free

 - fscache fix

 - minor strncpy cleanup

 - reconnect race fix

 - deal with various possible UAF race conditions tearing sessions down

* tag '6.9-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: client: fix potential UAF in cifs_signal_cifsd_for_reconnect()
  smb: client: fix potential UAF in smb2_is_network_name_deleted()
  smb: client: fix potential UAF in is_valid_oplock_break()
  smb: client: fix potential UAF in smb2_is_valid_oplock_break()
  smb: client: fix potential UAF in smb2_is_valid_lease_break()
  smb: client: fix potential UAF in cifs_stats_proc_show()
  smb: client: fix potential UAF in cifs_stats_proc_write()
  smb: client: fix potential UAF in cifs_dump_full_key()
  smb: client: fix potential UAF in cifs_debug_files_proc_show()
  smb3: retrying on failed server close
  smb: client: serialise cifs_construct_tcon() with cifs_mount_mutex
  smb: client: handle DFS tcons in cifs_construct_tcon()
  smb: client: refresh referral without acquiring refpath_lock
  smb: client: guarantee refcounted children from parent session
  cifs: Fix caching to try to do open O_WRONLY as rdwr on server
  smb: client: fix UAF in smb2_reconnect_server()
  smb: client: replace deprecated strncpy with strscpy

srso_alias_untrain_ret() is special code, even if it is a dummy
which is called in the !SRSO case, so annotate it like its real
counterpart, to address the following objtool splat:

  vmlinux.o: warning: objtool: .export_symbol+0x2b290: data relocation to !ENDBR: srso_alias_untrain_ret+0x0

Fixes: 4535e1a4 ("x86/bugs: Fix the SRSO mitigation on Zen3/4")
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240405144637.17908-1-bp@kernel.org

We want to fix:

  0e110732 ("x86/retpoline: Do the necessary fixup to the Zen3/4 srso return thunk for !SRSO")

So merge in Linus's latest into x86/urgent to have it available.
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'i2c-host-fixes-6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

An unused const variable kind of error has been fixed by placing
the definition of icr_bits[] inside the ifdef block where it is
used.

Merge tag 'firewire-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire fixes from Takashi Sakamoto:
 "The firewire-ohci kernel module has a parameter for verbose kernel
  logging. It is well-known that it logs the spurious IRQ for bus-reset
  event due to the unmasked register for IRQ event. This update fixes
  the issue"

* tag 'firewire-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: ohci: mask bus reset interrupts between ISR and bottom half

In the FireWire OHCI interrupt handler, if a bus reset interrupt has
occurred, mask bus reset interrupts until bus_reset_work has serviced and
cleared the interrupt.

Normally, we always leave bus reset interrupts masked. We infer the bus
reset from the self-ID interrupt that happens shortly thereafter. A
scenario where we unmask bus reset interrupts was introduced in 2008 in
a007bb85: If
OHCI_PARAM_DEBUG_BUSRESETS (8) is set in the debug parameter bitmask, we
will unmask bus reset interrupts so we can log them.

irq_handler logs the bus reset interrupt. However, we can't clear the bus
reset event flag in irq_handler, because we won't service the event until
later. irq_handler exits with the event flag still set. If the
corresponding interrupt is still unmasked, the first bus reset will
usually freeze the system due to irq_handler being called again each
time it exits. This freeze can be reproduced by loading firewire_ohci
with "modprobe firewire_ohci debug=-1" (to enable all debugging output).
Apparently there are also some cases where bus_reset_work will get called
soon enough to clear the event, and operation will continue normally.

This freeze was first reported a few months after a007bb85 was committed,
but until now it was never fixed. The debug level could safely be set
to -1 through sysfs after the module was loaded, but this would be
ineffectual in logging bus reset interrupts since they were only
unmasked during initialization.

irq_handler will now leave the event flag set but mask bus reset
interrupts, so irq_handler won't be called again and there will be no
freeze. If OHCI_PARAM_DEBUG_BUSRESETS is enabled, bus_reset_work will
unmask the interrupt after servicing the event, so future interrupts
will be caught as desired.

As a side effect to this change, OHCI_PARAM_DEBUG_BUSRESETS can now be
enabled through sysfs in addition to during initial module loading.
However, when enabled through sysfs, logging of bus reset interrupts will
be effective only starting with the second bus reset, after
bus_reset_work has executed.
Signed-off-by: Adam Goldman <adamg@pobox.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>

Pull spi fixes from Mark Brown:
 "A few small driver specific fixes, the most important being the
  s3c64xx change which is likely to be hit during normal operation"

* tag 'spi-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: mchp-pci1xxx: Fix a possible null pointer dereference in pci1xxx_spi_probe
  spi: spi-fsl-lpspi: remove redundant spi_controller_put call
  spi: s3c64xx: Use DMA mode from fifo size

Merge tag 'regulator-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "One simple regualtor fix, fixing module autoloading on tps65132"

* tag 'regulator-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: tps65132: Add of_match table

Pull regmap fixes from Mark Brown:
 "Richard found a nasty corner case in the maple tree code which he
  fixed, and also fixed a compiler warning which was showing up with the
  toolchain he uses and helpfully identified a possible incorrect error
  code which could have runtime impacts"

* tag 'regmap-fix-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: maple: Fix uninitialized symbol 'ret' warnings
  regmap: maple: Fix cache corruption in regcache_maple_drop()

Pull block fixes from Jens Axboe:

 - NVMe pull request via Keith:
      - Atomic queue limits fixes (Christoph)
      - Fabrics fixes (Hannes, Daniel)

 - Discard overflow fix (Li)

 - Cleanup fix for null_blk (Damien)

* tag 'block-6.9-20240405' of git://git.kernel.dk/linux:
  nvme-fc: rename free_ctrl callback to match name pattern
  nvmet-fc: move RCU read lock to nvmet_fc_assoc_exists
  nvmet: implement unique discovery NQN
  nvme: don't create a multipath node for zero capacity devices
  nvme: split nvme_update_zone_info
  nvme-multipath: don't inherit LBA-related fields for the multipath node
  block: fix overflow in blk_ioctl_discard()
  nullblk: Fix cleanup order in null_add_dev() error path

Pull io_uring fixes from Jens Axboe:

 - Backport of some fixes that came up during development of the 6.10
   io_uring patches. This includes some kbuf cleanups and reference
   fixes.

 - Disable multishot read if we don't have NOWAIT support on the target

 - Fix for a dependency issue with workqueue flushing

* tag 'io_uring-6.9-20240405' of git://git.kernel.dk/linux:
  io_uring/kbuf: hold io_buffer_list reference over mmap
  io_uring/kbuf: protect io_buffer_list teardown with a reference
  io_uring/kbuf: get rid of bl->is_ready
  io_uring/kbuf: get rid of lower BGID lists
  io_uring: use private workqueue for exit work
  io_uring: disable io-wq execution of multishot NOWAIT requests
  io_uring/rw: don't allow multishot reads without NOWAIT support