To avoid any ambiguity between vport index and vport number,
rename functions that had vport, to vport_num or vport_index appropriately.

vport_num is u16 hence change mlx5_eswitch_index_to_vport_num() return
type to u16.

vport_index is an int in vport array. Hence change input type of vport
index in mlx5_eswitch_index_to_vport_num() to int.

Correct multiple eswitch representor interfaces use type u16 of
rep->vport as type int vport_index.

Send vport FW commands with correct eswitch u16 vport_num instead
host int vport_index.

Fixes: 5ae51620 ("net/mlx5: E-Switch, Assign a different position for uplink rep and vport")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Current version of function status_to_err return -1 for any
status returned by mlx5_cmd_invoke function. In case status is
MLX5_DRIVER_STATUS_ABORTED we should return 0 to the caller as we
assume command completed successfully on FW. If error returned we are
getting confusing messages in dmesg. In addition, currently returned
value -1 is confusing with -EPERM.

New implementation actually fix original commit and return meaningful
codes for commands delivery status and print message in case of failure.

Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Valentine Fatiev <valentinef@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

mlxfw can be compiled as external module while mlx5_core can be
builtin, in such case mlx5 will act like mlxfw is disabled.

Since mlxfw is just a service library for mlx* drivers,
imply it in mlx5_core to make it always reachable if it was enabled.

Fixes: 3ffaabec ("net/mlx5e: Support the flash device ethtool callback")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

This reverts commit 532b0f7e.

More revisions coming up.
Signed-off-by: David S. Miller <davem@davemloft.net>

When the socket is released, we should free all packets
queued in the per-socket list in order to avoid a memory
leak.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Error message printed:
modprobe: ERROR: could not insert 'tipc': Address family not
supported by protocol.
when modprobe tipc after the following patch: switch order of
device registration, commit 7e27e8d6
("tipc: switch order of device registration to fix a crash")

Because sock_create_kern(net, AF_TIPC, ...) is called by
tipc_topsrv_create_listener() in the initialization process
of tipc_net_ops, tipc_socket_init() must be execute before that.

I move tipc_socket_init() into function tipc_init_net().

Fixes: 7e27e8d6
("tipc: switch order of device registration to fix a crash")
Signed-off-by: Junwei Hu <hujunwei4@huawei.com>
Reported-by: Wang Wang <wangwang2@huawei.com>
Reviewed-by: Kang Zhou <zhoukang7@huawei.com>
Reviewed-by: Suanming Mou <mousuanming@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Variable 'entropy' was wrongly documented as 'seed', changed comment to
reflect actual variable name.

../lib/random32.c:179: warning: Function parameter or member 'entropy' not described in 'prandom_seed'
../lib/random32.c:179: warning: Excess function parameter 'seed' description in 'prandom_seed'
Signed-off-by: Philippe Mazenauer <philippe.mazenauer@outlook.de>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Because the function snprintf write at most size bytes(including the
null byte).So the value of the argument size need not to minus one.
Signed-off-by: swkhack <swkhack@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When inserting route cache into the exception table, the key is
generated with both src_addr and dest_addr with src addr routing.
However, current logic always assumes the src_addr used to generate the
key is a /128 host address. This is not true in the following scenarios:
1. When the route is a gateway route or does not have next hop.
   (rt6_is_gw_or_nonexthop() == false)
2. When calling ip6_rt_cache_alloc(), saddr is passed in as NULL.
This means, when looking for a route cache in the exception table, we
have to do the lookup twice: first time with the passed in /128 host
address, second time with the src_addr stored in fib6_info.

This solves the pmtu discovery issue reported by Mikael Magnusson where
a route cache with a lower mtu info is created for a gateway route with
src addr. However, the lookup code is not able to find this route cache.

Fixes: 2b760fcf ("ipv6: hook up exception table to store dst cache")
Reported-by: Mikael Magnusson <mikael.kernel@lists.m7n.se>
Bisected-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Cc: Martin Lau <kafai@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The first command in setup_xfrm is failing resulting in the test getting
skipped:

+ ip netns exec ns-B ip -6 xfrm state add src fd00:1::a dst fd00:1::b spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel
+ out=RTNETLINK answers: Function not implemented
...
  xfrm6 not supported
TEST: vti6: PMTU exceptions                                         [SKIP]
  xfrm4 not supported
TEST: vti4: PMTU exceptions                                         [SKIP]
...

The setup command started failing when the run_cmd option was added.
Removing the quotes fixes the problem:
...
TEST: vti6: PMTU exceptions                                         [ OK ]
TEST: vti4: PMTU exceptions                                         [ OK ]
...

Fixes: 56490b62 ("selftests: Add debugging options to pmtu.sh")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When host is under high stress, it is very possible thread
running netdev_wait_allrefs() returns from msleep(250)
10 seconds late.

This leads to these messages in the syslog :

[...] unregister_netdevice: waiting for syz_tun to become free. Usage count = 0

If the device refcount is zero, the wait is over.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Igor Russkikh says:

====================
aqc111: revert endianess fixes and cleanup mtu logic

This reverts no-op commits as it was discussed:

https://lore.kernel.org/netdev/1557839644.11261.4.camel@suse.com/

First and second original patches are already dropped from stable,
No need to stable-queue the third patch as it has no functional impact,
just a logic cleanup.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Original fix b8b27752 was done under impression that invalid data
could be written for mtu configuration higher that 16334.

But the high limit will anyway be rejected my max_mtu check in caller.
Thus, make the code cleaner and allow it doing the configuration without
checking for maximum mtu value.

Fixes: b8b27752 ("aqc111: fix endianness issue in aqc111_change_mtu")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 369b46e9.

The required temporary storage is already done inside of write32/16
helpers.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 2cf67270.

The required temporary storage is already done inside of write32/16
helpers.
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This resurrects commit 8742dc86
("xfrm4: Fix uninitialized memory read in _decode_session4"),
which got lost during a merge conflict resolution between ipsec-next
and net-next tree.

c53ac41e ("xfrm: remove decode_session indirection from afinfo_policy")
in ipsec-next moved the (buggy) _decode_session4 from
net/ipv4/xfrm4_policy.c to net/xfrm/xfrm_policy.c.
In mean time, 8742dc86 was applied to ipsec.git and fixed the
problem in the "old" location.

When the trees got merged, the moved, old function was kept.
This applies the "lost" commit again, to the new location.

Fixes: a658a3f2 ("Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

When tipc is loaded while many processes try to create a TIPC socket,
a crash occurs:
 PANIC: Unable to handle kernel paging request at virtual
 address "dfff20000000021d"
 pc : tipc_sk_create+0x374/0x1180 [tipc]
 lr : tipc_sk_create+0x374/0x1180 [tipc]
   Exception class = DABT (current EL), IL = 32 bits
 Call trace:
  tipc_sk_create+0x374/0x1180 [tipc]
  __sock_create+0x1cc/0x408
  __sys_socket+0xec/0x1f0
  __arm64_sys_socket+0x74/0xa8
 ...

This is due to race between sock_create and unfinished
register_pernet_device. tipc_sk_insert tries to do
"net_generic(net, tipc_net_id)".
but tipc_net_id is not initialized yet.

So switch the order of the two to close the race.

This can be reproduced with multiple processes doing socket(AF_TIPC, ...)
and one process doing module removal.

Fixes: a62fbcce ("tipc: make subscriber server support net namespace")
Signed-off-by: Junwei Hu <hujunwei4@huawei.com>
Reported-by: Wang Wang <wangwang2@huawei.com>
Reviewed-by: Xiaogang Wang <wangxiaogang3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

At ipv6 route dismantle, fib6_drop_pcpu_from() is responsible
for finding all percpu routes and set their ->from pointer
to NULL, so that fib6_ref can reach its expected value (1).

The problem right now is that other cpus can still catch the
route being deleted, since there is no rcu grace period
between the route deletion and call to fib6_drop_pcpu_from()

This can leak the fib6 and associated resources, since no
notifier will take care of removing the last reference(s).

I decided to add another boolean (fib6_destroying) instead
of reusing/renaming exception_bucket_flushed to ease stable backports,
and properly document the memory barriers used to implement this fix.

This patch has been co-developped with Wei Wang.

Fixes: 93531c67 ("net/ipv6: separate handling of FIB entries from dst based routes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Wei Wang <weiwan@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Martin Lau <kafai@fb.com>
Acked-by: Wei Wang <weiwan@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Zerocopy skbs without completion notification were added for packet
sockets with PACKET_TX_RING user buffers. Those signal completion
through the TP_STATUS_USER bit in the ring. Zerocopy annotation was
added only to avoid premature notification after clone or orphan, by
triggering a copy on these paths for these packets.

The mechanism had to define a special "no-uarg" mode because packet
sockets already use skb_uarg(skb) == skb_shinfo(skb)->destructor_arg
for a different pointer.

Before deferencing skb_uarg(skb), verify that it is a real pointer.

Fixes: 5cd8d46e ("packet: copy user buffers before orphan or clone")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Added support for Telit LE910Cx 0x1260 and 0x1261 compositions.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

XGMII interface mode no longer works on AQR107 after the recent changes,
adding back support.

Fixes: 570c8a7d ("net: phy: aquantia: check for supported interface modes in config_init")
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If bpfilter is not available return ENOPROTOOPT to fallback to netfilter.

Function request_module() returns both errors and userspace exit codes.
Just ignore them. Rechecking bpfilter_ops is enough.

Fixes: d2ba09c1 ("net: add skeleton of bpfilter kernel module")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, hvsock does not implement any delayed or background close
logic. Whenever the hvsock socket is closed, a FIN is sent to the peer, and
the last reference to the socket is dropped, which leads to a call to
.destruct where the socket can hang indefinitely waiting for the peer to
close it's side. The can cause the user application to hang in the close()
call.

This change implements proper STREAM(TCP) closing handshake mechanism by
sending the FIN to the peer and the waiting for the peer's FIN to arrive
for a given timeout. On timeout, it will try to terminate the connection
(i.e. a RST). This is in-line with other socket providers such as virtio.

This change does not address the hang in the vmbus_hvsock_device_unregister
where it waits indefinitely for the host to rescind the channel. That
should be taken up as a separate fix.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove the MEMDUMP_DEV case in ia_ioctl to avoid copy
pointers to user space.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Edward Cree says:

====================
flow_offload: fix CVLAN support

When the flow_offload infrastructure was added, CVLAN matches weren't
 plumbed through, and flow_rule_match_vlan() was incorrectly called in
 the mlx5 driver when populating CVLAN match information.  This series
 adds flow_rule_match_cvlan(), and uses it in the mlx5 code.
Both patches should also go to 5.1 stable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When flow_rule_match_XYZ() functions were first introduced,
flow_rule_match_cvlan() for inner vlan is missing.

In mlx5_core driver, to get inner vlan key and mask, flow_rule_match_vlan()
is just called, which is wrong because it obtains outer vlan information by
FLOW_DISSECTOR_KEY_VLAN.

This commit fixes this by changing to call flow_rule_match_cvlan() after
it's added.

Fixes: 8f256622 ("flow_offload: add flow_rule and flow_match structures and use them")
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Plumb it through from the flow_dissector.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Herbert Xu says:

====================
rhashtable: Fix sparse warnings

This patch series fixes all the sparse warnings.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

As cmpxchg is a non-RCU mechanism it will cause sparse warnings
when we use it for RCU.  This patch adds explicit casts to silence
those warnings.  This should probably be moved to RCU itself in
future.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The opaque type rhash_lock_head should not be marked with __rcu
because it can never be dereferenced.  We should apply the RCU
marking when we turn it into a pointer which can be dereferenced.

This patch does exactly that.  This fixes a number of sparse
warnings as well as getting rid of some unnecessary RCU checking.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2019-05-16

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a use after free in __dev_map_entry_free(), from Eric.

2) Several sockmap related bug fixes: a splat in strparser if
   it was never initialized, remove duplicate ingress msg list
   purging which can race, fix msg->sg.size accounting upon
   skb to msg conversion, and last but not least fix a timeout
   bug in tcp_bpf_wait_data(), from John.

3) Fix LRU map to avoid messing with eviction heuristics upon
   syscall lookup, e.g. map walks from user space side will
   then lead to eviction of just recently created entries on
   updates as it would mark all map entries, from Daniel.

4) Don't bail out when libbpf feature probing fails. Also
   various smaller fixes to flow_dissector test, from Stanislav.

5) Fix missing brackets for BTF_INT_OFFSET() in UAPI, from Gary.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The tcp_bpf_wait_data() routine needs to check timeo != 0 before
calling sk_wait_event() otherwise we may see unexpected stalls
on receiver.

Arika did all the leg work here I just formatted, posted and ran
a few tests.

Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface")
Reported-by: Arika Chen <eaglesora@gmail.com>
Suggested-by: Arika Chen <eaglesora@gmail.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

In case we are not running in a namespace (which we don't do by default),
let's try to detach the bpf program that we use for eth_get_headlen tests.

Fixes: 0905beec ("selftests/bpf: run flow dissector tests in skb-less mode")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Otherwise, in case of an error, everything gets mushed together.

Fixes: a5cb3346 ("selftests/bpf: make flow dissector tests more extensible")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Otherwise libbpf is unusable from unprivileged process with
kernel.kernel.unprivileged_bpf_disabled=1.
All I get is EPERM from the probes, even if I just want to
open an ELF object and look at what progs/maps it has.

Instead of dying on probes, let's just pr_debug the error and
try to continue.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

It is illegal to change arbitrary fields in skb_shared_info if the
skb is cloned.

Before calling skb_zcopy_clear() we need to ensure this rule,
therefore we need to move the test from sk_stream_alloc_skb()
to sk_wmem_free_skb()

Fixes: 4f661542 ("tcp: fix zerocopy and notsent_lowat issues")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Diagnosed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Just hook get_link to standard ethtool_op_get_link,
nothing special needed at this point.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The fact that the Tx SG flag is fixed to 'on' is only
an oversight. Non-SG mode is also supported. Fix this
by allowing to turn SG off.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For the unlikely case of TxBD extensions (i.e. ptp)
the driver tries to unmap the tx_swbd corresponding
to the extension, which is bogus as it has no buffer
attached.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add rcu locks when accessing netdev when processing route request
and tunnel keep alive messages received from hardware.

Fixes: 8e6a9046 ("nfp: flower vxlan neighbour offload")
Fixes: 856f5b13 ("nfp: flower vxlan neighbour keep-alive")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>