- 22 Jul, 2020 11 commits
-
-
Christoph Paasch authored
[ Upstream commit ce69e563 ] syzkaller found its way into setsockopt with TCP_CONGESTION "cdg". tcp_cdg_init() does a kcalloc to store the gradients. As sk_clone_lock just copies all the memory, the allocated pointer will be copied as well, if the app called setsockopt(..., TCP_CONGESTION) on the listener. If now the socket will be destroyed before the congestion-control has properly been initialized (through a call to tcp_init_transfer), we will end up freeing memory that does not belong to that particular socket, opening the door to a double-free: [ 11.413102] ================================================================== [ 11.414181] BUG: KASAN: double-free or invalid-free in tcp_cleanup_congestion_control+0x58/0xd0 [ 11.415329] [ 11.415560] CPU: 3 PID: 4884 Comm: syz-executor.5 Not tainted 5.8.0-rc2 #80 [ 11.416544] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 11.418148] Call Trace: [ 11.418534] <IRQ> [ 11.418834] dump_stack+0x7d/0xb0 [ 11.419297] print_address_description.constprop.0+0x1a/0x210 [ 11.422079] kasan_report_invalid_free+0x51/0x80 [ 11.423433] __kasan_slab_free+0x15e/0x170 [ 11.424761] kfree+0x8c/0x230 [ 11.425157] tcp_cleanup_congestion_control+0x58/0xd0 [ 11.425872] tcp_v4_destroy_sock+0x57/0x5a0 [ 11.426493] inet_csk_destroy_sock+0x153/0x2c0 [ 11.427093] tcp_v4_syn_recv_sock+0xb29/0x1100 [ 11.427731] tcp_get_cookie_sock+0xc3/0x4a0 [ 11.429457] cookie_v4_check+0x13d0/0x2500 [ 11.433189] tcp_v4_do_rcv+0x60e/0x780 [ 11.433727] tcp_v4_rcv+0x2869/0x2e10 [ 11.437143] ip_protocol_deliver_rcu+0x23/0x190 [ 11.437810] ip_local_deliver+0x294/0x350 [ 11.439566] __netif_receive_skb_one_core+0x15d/0x1a0 [ 11.441995] process_backlog+0x1b1/0x6b0 [ 11.443148] net_rx_action+0x37e/0xc40 [ 11.445361] __do_softirq+0x18c/0x61a [ 11.445881] asm_call_on_stack+0x12/0x20 [ 11.446409] </IRQ> [ 11.446716] do_softirq_own_stack+0x34/0x40 [ 11.447259] do_softirq.part.0+0x26/0x30 [ 11.447827] __local_bh_enable_ip+0x46/0x50 [ 11.448406] ip_finish_output2+0x60f/0x1bc0 [ 11.450109] __ip_queue_xmit+0x71c/0x1b60 [ 11.451861] __tcp_transmit_skb+0x1727/0x3bb0 [ 11.453789] tcp_rcv_state_process+0x3070/0x4d3a [ 11.456810] tcp_v4_do_rcv+0x2ad/0x780 [ 11.457995] __release_sock+0x14b/0x2c0 [ 11.458529] release_sock+0x4a/0x170 [ 11.459005] __inet_stream_connect+0x467/0xc80 [ 11.461435] inet_stream_connect+0x4e/0xa0 [ 11.462043] __sys_connect+0x204/0x270 [ 11.465515] __x64_sys_connect+0x6a/0xb0 [ 11.466088] do_syscall_64+0x3e/0x70 [ 11.466617] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 11.467341] RIP: 0033:0x7f56046dc469 [ 11.467844] Code: Bad RIP value. [ 11.468282] RSP: 002b:00007f5604dccdd8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a [ 11.469326] RAX: ffffffffffffffda RBX: 000000000068bf00 RCX: 00007f56046dc469 [ 11.470379] RDX: 0000000000000010 RSI: 0000000020000000 RDI: 0000000000000004 [ 11.471311] RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000000 [ 11.472286] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 11.473341] R13: 000000000041427c R14: 00007f5604dcd5c0 R15: 0000000000000003 [ 11.474321] [ 11.474527] Allocated by task 4884: [ 11.475031] save_stack+0x1b/0x40 [ 11.475548] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 11.476182] tcp_cdg_init+0xf0/0x150 [ 11.476744] tcp_init_congestion_control+0x9b/0x3a0 [ 11.477435] tcp_set_congestion_control+0x270/0x32f [ 11.478088] do_tcp_setsockopt.isra.0+0x521/0x1a00 [ 11.478744] __sys_setsockopt+0xff/0x1e0 [ 11.479259] __x64_sys_setsockopt+0xb5/0x150 [ 11.479895] do_syscall_64+0x3e/0x70 [ 11.480395] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 11.481097] [ 11.481321] Freed by task 4872: [ 11.481783] save_stack+0x1b/0x40 [ 11.482230] __kasan_slab_free+0x12c/0x170 [ 11.482839] kfree+0x8c/0x230 [ 11.483240] tcp_cleanup_congestion_control+0x58/0xd0 [ 11.483948] tcp_v4_destroy_sock+0x57/0x5a0 [ 11.484502] inet_csk_destroy_sock+0x153/0x2c0 [ 11.485144] tcp_close+0x932/0xfe0 [ 11.485642] inet_release+0xc1/0x1c0 [ 11.486131] __sock_release+0xc0/0x270 [ 11.486697] sock_close+0xc/0x10 [ 11.487145] __fput+0x277/0x780 [ 11.487632] task_work_run+0xeb/0x180 [ 11.488118] __prepare_exit_to_usermode+0x15a/0x160 [ 11.488834] do_syscall_64+0x4a/0x70 [ 11.489326] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Wei Wang fixed a part of these CDG-malloc issues with commit c1201444 ("tcp: memset ca_priv data to 0 properly"). This patch here fixes the listener-scenario: We make sure that listeners setting the congestion-control through setsockopt won't initialize it (thus CDG never allocates on listeners). For those who use AF_UNSPEC to reuse a socket, tcp_disconnect() is changed to cleanup afterwards. (The issue can be reproduced at least down to v4.4.x.) Cc: Wei Wang <weiwan@google.com> Cc: Eric Dumazet <edumazet@google.com> Fixes: 2b0a8c9e ("tcp: add CDG congestion control") Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit ba3bb0e7 ] Whenever tcp_try_rmem_schedule() returns an error, we are under trouble and should make sure to wakeup readers so that they can drain socket queues and eventually make room. Fixes: 03f45c88 ("tcp: avoid extra wakeups for SO_RCVLOWAT users") Signed-off-by:
-
AceLan Kao authored
[ Upstream commit f815dd5c ] Add support for Quectel Wireless Solutions Co., Ltd. EG95 LTE modem T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0195 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by:
AceLan Kao <acelan.kao@canonical.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 306381ae ] When tcf_block_get() fails inside atm_tc_init(), atm_tc_put() is called to release the qdisc p->link.q. But the flow->ref prevents it to do so, as the flow->ref is still zero. Fix this by moving the p->link.ref initialization before tcf_block_get(). Fixes: 6529eaba ("net: sched: introduce tcf block infractructure") Reported-and-tested-by: syzbot+d411cff6ab29cc2c311b@syzkaller.appspotmail.com Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Martin Varghese authored
[ Upstream commit 394de110 ] The packets from tunnel devices (eg bareudp) may have only metadata in the dst pointer of skb. Hence a pointer check of neigh_lookup is needed in dst_neigh_lookup_skb Kernel crashes when packets from bareudp device is processed in the kernel neighbour subsytem. [ 133.384484] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 133.385240] #PF: supervisor instruction fetch in kernel mode [ 133.385828] #PF: error_code(0x0010) - not-present page [ 133.386603] PGD 0 P4D 0 [ 133.386875] Oops: 0010 [#1] SMP PTI [ 133.387275] CPU: 0 PID: 5045 Comm: ping Tainted: G W 5.8.0-rc2+ #15 [ 133.388052] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 133.391076] RIP: 0010:0x0 [ 133.392401] Code: Bad RIP value. [ 133.394029] RSP: 0018:ffffb79980003d50 EFLAGS: 00010246 [ 133.396656] RAX: 0000000080000102 RBX: ffff9de2fe0d6600 RCX: ffff9de2fe5e9d00 [ 133.399018] RDX: 0000000000000000 RSI: ffff9de2fe5e9d00 RDI: ffff9de2fc21b400 [ 133.399685] RBP: ffff9de2fe5e9d00 R08: 0000000000000000 R09: 0000000000000000 [ 133.400350] R10: ffff9de2fbc6be22 R11: ffff9de2fe0d6600 R12: ffff9de2fc21b400 [ 133.401010] R13: ffff9de2fe0d6628 R14: 0000000000000001 R15: 0000000000000003 [ 133.401667] FS: 00007fe014918740(0000) GS:ffff9de2fec00000(0000) knlGS:0000000000000000 [ 133.402412] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 133.402948] CR2: ffffffffffffffd6 CR3: 000000003bb72000 CR4: 00000000000006f0 [ 133.403611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 133.404270] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 133.404933] Call Trace: [ 133.405169] <IRQ> [ 133.405367] __neigh_update+0x5a4/0x8f0 [ 133.405734] arp_process+0x294/0x820 [ 133.406076] ? __netif_receive_skb_core+0x866/0xe70 [ 133.406557] arp_rcv+0x129/0x1c0 [ 133.406882] __netif_receive_skb_one_core+0x95/0xb0 [ 133.407340] process_backlog+0xa7/0x150 [ 133.407705] net_rx_action+0x2af/0x420 [ 133.408457] __do_softirq+0xda/0x2a8 [ 133.408813] asm_call_on_stack+0x12/0x20 [ 133.409290] </IRQ> [ 133.409519] do_softirq_own_stack+0x39/0x50 [ 133.410036] do_softirq+0x50/0x60 [ 133.410401] __local_bh_enable_ip+0x50/0x60 [ 133.410871] ip_finish_output2+0x195/0x530 [ 133.411288] ip_output+0x72/0xf0 [ 133.411673] ? __ip_finish_output+0x1f0/0x1f0 [ 133.412122] ip_send_skb+0x15/0x40 [ 133.412471] raw_sendmsg+0x853/0xab0 [ 133.412855] ? insert_pfn+0xfe/0x270 [ 133.413827] ? vvar_fault+0xec/0x190 [ 133.414772] sock_sendmsg+0x57/0x80 [ 133.415685] __sys_sendto+0xdc/0x160 [ 133.416605] ? syscall_trace_enter+0x1d4/0x2b0 [ 133.417679] ? __audit_syscall_exit+0x1d9/0x280 [ 133.418753] ? __prepare_exit_to_usermode+0x5d/0x1a0 [ 133.419819] __x64_sys_sendto+0x24/0x30 [ 133.420848] do_syscall_64+0x4d/0x90 [ 133.421768] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 133.422833] RIP: 0033:0x7fe013689c03 [ 133.423749] Code: Bad RIP value. [ 133.424624] RSP: 002b:00007ffc7288f418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 133.425940] RAX: ffffffffffffffda RBX: 000056151fc63720 RCX: 00007fe013689c03 [ 133.427225] RDX: 0000000000000040 RSI: 000056151fc63720 RDI: 0000000000000003 [ 133.428481] RBP: 00007ffc72890b30 R08: 000056151fc60500 R09: 0000000000000010 [ 133.429757] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 [ 133.431041] R13: 000056151fc636e0 R14: 000056151fc616bc R15: 0000000000000080 [ 133.432481] Modules linked in: mpls_iptunnel act_mirred act_tunnel_key cls_flower sch_ingress veth mpls_router ip_tunnel bareudp ip6_udp_tunnel udp_tunnel macsec udp_diag inet_diag unix_diag af_packet_diag netlink_diag binfmt_misc xt_MASQUERADE iptable_nat xt_addrtype xt_conntrack nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc ebtable_filter ebtables overlay ip6table_filter ip6_tables iptable_filter sunrpc ext4 mbcache jbd2 pcspkr i2c_piix4 virtio_balloon joydev ip_tables xfs libcrc32c ata_generic qxl pata_acpi drm_ttm_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ata_piix libata virtio_net net_failover virtio_console failover virtio_blk i2c_core virtio_pci virtio_ring serio_raw floppy virtio dm_mirror dm_region_hash dm_log dm_mod [ 133.444045] CR2: 0000000000000000 [ 133.445082] ---[ end trace f4aeee1958fd1638 ]--- [ 133.446236] RIP: 0010:0x0 [ 133.447180] Code: Bad RIP value. [ 133.448152] RSP: 0018:ffffb79980003d50 EFLAGS: 00010246 [ 133.449363] RAX: 0000000080000102 RBX: ffff9de2fe0d6600 RCX: ffff9de2fe5e9d00 [ 133.450835] RDX: 0000000000000000 RSI: ffff9de2fe5e9d00 RDI: ffff9de2fc21b400 [ 133.452237] RBP: ffff9de2fe5e9d00 R08: 0000000000000000 R09: 0000000000000000 [ 133.453722] R10: ffff9de2fbc6be22 R11: ffff9de2fe0d6600 R12: ffff9de2fc21b400 [ 133.455149] R13: ffff9de2fe0d6628 R14: 0000000000000001 R15: 0000000000000003 [ 133.456520] FS: 00007fe014918740(0000) GS:ffff9de2fec00000(0000) knlGS:0000000000000000 [ 133.458046] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 133.459342] CR2: ffffffffffffffd6 CR3: 000000003bb72000 CR4: 00000000000006f0 [ 133.460782] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 133.462240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 133.463697] Kernel panic - not syncing: Fatal exception in interrupt [ 133.465226] Kernel Offset: 0xfa00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 133.467025] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fixes: aaa0c23c ("Fix dst_neigh_lookup/dst_neigh_lookup_skb return value handling bug") Signed-off-by:
Martin Varghese <martin.varghese@nokia.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit a9b11101 ] syzbot was to trigger a bug by tricking AF_LLC with non sensible addr->sllc_arphrd It seems clear LLC requires an Ethernet device. Back in commit abf9d537 ("llc: add support for SO_BINDTODEVICE") Octavian Purdila added possibility for application to use a zero value for sllc_arphrd, convert it to ARPHRD_ETHER to not cause regressions on existing applications. BUG: KASAN: use-after-free in __read_once_size include/linux/compiler.h:199 [inline] BUG: KASAN: use-after-free in list_empty include/linux/list.h:268 [inline] BUG: KASAN: use-after-free in waitqueue_active include/linux/wait.h:126 [inline] BUG: KASAN: use-after-free in wq_has_sleeper include/linux/wait.h:160 [inline] BUG: KASAN: use-after-free in skwq_has_sleeper include/net/sock.h:2092 [inline] BUG: KASAN: use-after-free in sock_def_write_space+0x642/0x670 net/core/sock.c:2813 Read of size 8 at addr ffff88801e0b4078 by task ksoftirqd/3/27 CPU: 3 PID: 27 Comm: ksoftirqd/3 Not tainted 5.5.0-rc1-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135 __read_once_size include/linux/compiler.h:199 [inline] list_empty include/linux/list.h:268 [inline] waitqueue_active include/linux/wait.h:126 [inline] wq_has_sleeper include/linux/wait.h:160 [inline] skwq_has_sleeper include/net/sock.h:2092 [inline] sock_def_write_space+0x642/0x670 net/core/sock.c:2813 sock_wfree+0x1e1/0x260 net/core/sock.c:1958 skb_release_head_state+0xeb/0x260 net/core/skbuff.c:652 skb_release_all+0x16/0x60 net/core/skbuff.c:663 __kfree_skb net/core/skbuff.c:679 [inline] consume_skb net/core/skbuff.c:838 [inline] consume_skb+0xfb/0x410 net/core/skbuff.c:832 __dev_kfree_skb_any+0xa4/0xd0 net/core/dev.c:2967 dev_kfree_skb_any include/linux/netdevice.h:3650 [inline] e1000_unmap_and_free_tx_resource.isra.0+0x21b/0x3a0 drivers/net/ethernet/intel/e1000/e1000_main.c:1963 e1000_clean_tx_irq drivers/net/ethernet/intel/e1000/e1000_main.c:3854 [inline] e1000_clean+0x4cc/0x1d10 drivers/net/ethernet/intel/e1000/e1000_main.c:3796 napi_poll net/core/dev.c:6532 [inline] net_rx_action+0x508/0x1120 net/core/dev.c:6600 __do_softirq+0x262/0x98c kernel/softirq.c:292 run_ksoftirqd kernel/softirq.c:603 [inline] run_ksoftirqd+0x8e/0x110 kernel/softirq.c:595 smpboot_thread_fn+0x6a3/0xa40 kernel/smpboot.c:165 kthread+0x361/0x430 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 Allocated by task 8247: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] __kasan_kmalloc mm/kasan/common.c:513 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:486 kasan_slab_alloc+0xf/0x20 mm/kasan/common.c:521 slab_post_alloc_hook mm/slab.h:584 [inline] slab_alloc mm/slab.c:3320 [inline] kmem_cache_alloc+0x121/0x710 mm/slab.c:3484 sock_alloc_inode+0x1c/0x1d0 net/socket.c:240 alloc_inode+0x68/0x1e0 fs/inode.c:230 new_inode_pseudo+0x19/0xf0 fs/inode.c:919 sock_alloc+0x41/0x270 net/socket.c:560 __sock_create+0xc2/0x730 net/socket.c:1384 sock_create net/socket.c:1471 [inline] __sys_socket+0x103/0x220 net/socket.c:1513 __do_sys_socket net/socket.c:1522 [inline] __se_sys_socket net/socket.c:1520 [inline] __ia32_sys_socket+0x73/0xb0 net/socket.c:1520 do_syscall_32_irqs_on arch/x86/entry/common.c:337 [inline] do_fast_syscall_32+0x27b/0xe16 arch/x86/entry/common.c:408 entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139 Freed by task 17: save_stack+0x23/0x90 mm/kasan/common.c:72 set_track mm/kasan/common.c:80 [inline] kasan_set_free_info mm/kasan/common.c:335 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:474 kasan_slab_free+0xe/0x10 mm/kasan/common.c:483 __cache_free mm/slab.c:3426 [inline] kmem_cache_free+0x86/0x320 mm/slab.c:3694 sock_free_inode+0x20/0x30 net/socket.c:261 i_callback+0x44/0x80 fs/inode.c:219 __rcu_reclaim kernel/rcu/rcu.h:222 [inline] rcu_do_batch kernel/rcu/tree.c:2183 [inline] rcu_core+0x570/0x1540 kernel/rcu/tree.c:2408 rcu_core_si+0x9/0x10 kernel/rcu/tree.c:2417 __do_softirq+0x262/0x98c kernel/softirq.c:292 The buggy address belongs to the object at ffff88801e0b4000 which belongs to the cache sock_inode_cache of size 1152 The buggy address is located 120 bytes inside of 1152-byte region [ffff88801e0b4000, ffff88801e0b4480) The buggy address belongs to the page: page:ffffea0000782d00 refcount:1 mapcount:0 mapping:ffff88807aa59c40 index:0xffff88801e0b4ffd raw: 00fffe0000000200 ffffea00008e6c88 ffffea0000782d48 ffff88807aa59c40 raw: ffff88801e0b4ffd ffff88801e0b4000 0000000100000003 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88801e0b3f00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff88801e0b3f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88801e0b4000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88801e0b4080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88801e0b4100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: abf9d537 ("llc: add support for SO_BINDTODEVICE") Signed-off-by:
-
Xin Long authored
[ Upstream commit 27d53323 ] In the tx path of l2tp, l2tp_xmit_skb() calls skb_dst_set() to set skb's dst. However, it will eventually call inet6_csk_xmit() or ip_queue_xmit() where skb's dst will be overwritten by: skb_dst_set_noref(skb, dst); without releasing the old dst in skb. Then it causes dst/dev refcnt leak: unregister_netdevice: waiting for eth0 to become free. Usage count = 1 This can be reproduced by simply running: # modprobe l2tp_eth && modprobe l2tp_ip # sh ./tools/testing/selftests/net/l2tp.sh So before going to inet6_csk_xmit() or ip_queue_xmit(), skb's dst should be dropped. This patch is to fix it by removing skb_dst_set() from l2tp_xmit_skb() and moving skb_dst_drop() into l2tp_xmit_core(). Fixes: 3557baab ("[L2TP]: PPP over L2TP driver core") Reported-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
James Chapman <jchapman@katalix.com> Tested-by:
-
Sabrina Dubroca authored
[ Upstream commit 5eff0690 ] IPv4 ping sockets don't set fl4.fl4_icmp_{type,code}, which leads to incomplete IPsec ACQUIRE messages being sent to userspace. Currently, both raw sockets and IPv6 ping sockets set those fields. Expected output of "ip xfrm monitor": acquire proto esp sel src 10.0.2.15/32 dst 8.8.8.8/32 proto icmp type 8 code 0 dev ens4 policy src 10.0.2.15/32 dst 8.8.8.8/32 <snip> Currently with ping sockets: acquire proto esp sel src 10.0.2.15/32 dst 8.8.8.8/32 proto icmp type 0 code 0 dev ens4 policy src 10.0.2.15/32 dst 8.8.8.8/32 <snip> The Libreswan test suite found this problem after Fedora changed the value for the sysctl net.ipv4.ping_group_range. Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind") Reported-by:
Paul Wouters <pwouters@redhat.com> Tested-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Sean Tranchetti authored
[ Upstream commit 1e82a62f ] A potential deadlock can occur during registering or unregistering a new generic netlink family between the main nl_table_lock and the cb_lock where each thread wants the lock held by the other, as demonstrated below. 1) Thread 1 is performing a netlink_bind() operation on a socket. As part of this call, it will call netlink_lock_table(), incrementing the nl_table_users count to 1. 2) Thread 2 is registering (or unregistering) a genl_family via the genl_(un)register_family() API. The cb_lock semaphore will be taken for writing. 3) Thread 1 will call genl_bind() as part of the bind operation to handle subscribing to GENL multicast groups at the request of the user. It will attempt to take the cb_lock semaphore for reading, but it will fail and be scheduled away, waiting for Thread 2 to finish the write. 4) Thread 2 will call netlink_table_grab() during the (un)registration call. However, as Thread 1 has incremented nl_table_users, it will not be able to proceed, and both threads will be stuck waiting for the other. genl_bind() is a noop, unless a genl_family implements the mcast_bind() function to handle setting up family-specific multicast operations. Since no one in-tree uses this functionality as Cong pointed out, simply removing the genl_bind() function will remove the possibility for deadlock, as there is no attempt by Thread 1 above to take the cb_lock semaphore. Fixes: c380d9a7 ("genetlink: pass multicast bind/unbind to families") Suggested-by:
Johannes Berg <johannes.berg@intel.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Sean Tranchetti <stranche@codeaurora.org> Signed-off-by:
-
Taehee Yoo authored
commit 2a762e9e upstream. There are two types of the lower interface of rmnet that are VND and BRIDGE. Each lower interface can have only one type either VND or BRIDGE. But, there is a case, which uses both lower interface types. Due to this unexpected behavior, lower interface leak occurs. Test commands: ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add rmnet0 link dummy0 type rmnet mux_id 1 ip link set dummy1 master rmnet0 ip link add rmnet1 link dummy1 type rmnet mux_id 2 ip link del rmnet0 The dummy1 was attached as BRIDGE interface of rmnet0. Then, it also was attached as VND interface of rmnet1. This is unexpected behavior and there is no code for handling this case. So that below splat occurs when the rmnet0 interface is deleted. Splat looks like: [ 53.254112][ C1] WARNING: CPU: 1 PID: 1192 at net/core/dev.c:8992 rollback_registered_many+0x986/0xcf0 [ 53.254117][ C1] Modules linked in: rmnet dummy openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nfx [ 53.254182][ C1] CPU: 1 PID: 1192 Comm: ip Not tainted 5.8.0-rc1+ #620 [ 53.254188][ C1] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 53.254192][ C1] RIP: 0010:rollback_registered_many+0x986/0xcf0 [ 53.254200][ C1] Code: 41 8b 4e cc 45 31 c0 31 d2 4c 89 ee 48 89 df e8 e0 47 ff ff 85 c0 0f 84 cd fc ff ff 0f 0b e5 [ 53.254205][ C1] RSP: 0018:ffff888050a5f2e0 EFLAGS: 00010287 [ 53.254214][ C1] RAX: ffff88805756d658 RBX: ffff88804d99c000 RCX: ffffffff8329d323 [ 53.254219][ C1] RDX: 1ffffffff0be6410 RSI: 0000000000000008 RDI: ffffffff85f32080 [ 53.254223][ C1] RBP: dffffc0000000000 R08: fffffbfff0be6411 R09: fffffbfff0be6411 [ 53.254228][ C1] R10: ffffffff85f32087 R11: 0000000000000001 R12: ffff888050a5f480 [ 53.254233][ C1] R13: ffff88804d99c0b8 R14: ffff888050a5f400 R15: ffff8880548ebe40 [ 53.254238][ C1] FS: 00007f6b86b370c0(0000) GS:ffff88806c200000(0000) knlGS:0000000000000000 [ 53.254243][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.254248][ C1] CR2: 0000562c62438758 CR3: 000000003f600005 CR4: 00000000000606e0 [ 53.254253][ C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.254257][ C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.254261][ C1] Call Trace: [ 53.254266][ C1] ? lockdep_hardirqs_on_prepare+0x379/0x540 [ 53.254270][ C1] ? netif_set_real_num_tx_queues+0x780/0x780 [ 53.254275][ C1] ? rmnet_unregister_real_device+0x56/0x90 [rmnet] [ 53.254279][ C1] ? __kasan_slab_free+0x126/0x150 [ 53.254283][ C1] ? kfree+0xdc/0x320 [ 53.254288][ C1] ? rmnet_unregister_real_device+0x56/0x90 [rmnet] [ 53.254293][ C1] unregister_netdevice_many.part.135+0x13/0x1b0 [ 53.254297][ C1] rtnl_delete_link+0xbc/0x100 [ 53.254301][ C1] ? rtnl_af_register+0xc0/0xc0 [ 53.254305][ C1] rtnl_dellink+0x2dc/0x840 [ 53.254309][ C1] ? find_held_lock+0x39/0x1d0 [ 53.254314][ C1] ? valid_fdb_dump_strict+0x620/0x620 [ 53.254318][ C1] ? rtnetlink_rcv_msg+0x457/0x890 [ 53.254322][ C1] ? lock_contended+0xd20/0xd20 [ 53.254326][ C1] rtnetlink_rcv_msg+0x4a8/0x890 [ ... ] [ 73.813696][ T1192] unregister_netdevice: waiting for rmnet0 to become free. Usage count = 1 Fixes: 037f9cdf ("net: rmnet: use upper/lower device infrastructure") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Changbin Du authored
commit 0ada120c upstream. libbfd has changed the bfd_section_* macros to inline functions bfd_section_<field> since 2019-09-18. See below two commits: o http://www.sourceware.org/ml/gdb-cvs/2019-09/msg00064.html o https://www.sourceware.org/ml/gdb-cvs/2019-09/msg00072.html This fix make perf able to build with both old and new libbfd. Signed-off-by:
Changbin Du <changbin.du@gmail.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200128152938.31413-1-changbin.du@gmail.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jianmin Wang <jianmin@iscas.ac.cn> Signed-off-by:
-
- 16 Jul, 2020 29 commits
-
-
Greg Kroah-Hartman authored
-
Janosch Frank authored
commit 528a9539 upstream. If the pmd is soft dirty we must mark the pte as soft dirty (and not dirty). This fixes some cases for guest migration with huge page backings. Cc: <stable@vger.kernel.org> # 4.8 Fixes: bc29b7ac ("s390/mm: clean up pte/pmd encoding") Reviewed-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by:
Janosch Frank <frankja@linux.ibm.com> Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
-
Vineet Gupta authored
commit b7faf971 upstream. Cc: <stable@vger.kernel.org> Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Vineet Gupta authored
commit 00fdec98 upstream. Trap handler for syscall tracing reads EFA (Exception Fault Address), in case strace wants PC of trap instruction (EFA is not part of pt_regs as of current code). However this EFA read is racy as it happens after dropping to pure kernel mode (re-enabling interrupts). A taken interrupt could context-switch, trigger a different task's trap, clobbering EFA for this execution context. Fix this by reading EFA early, before re-enabling interrupts. A slight side benefit is de-duplication of FAKE_RET_FROM_EXCPN in trap handler. The trap handler is common to both ARCompact and ARCv2 builds too. This just came out of code rework/review and no real problem was reported but is clearly a potential problem specially for strace. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Mikulas Patocka authored
commit 6958c1c6 upstream. kobject_uevent may allocate memory and it may be called while there are dm devices suspended. The allocation may recurse into a suspended device, causing a deadlock. We must set the noio flag when sending a uevent. The observed deadlock was reported here: https://www.redhat.com/archives/dm-devel/2020-March/msg00025.htmlReported-by:
Khazhismel Kumykov <khazhy@google.com> Reported-by:
Tahsin Erdogan <tahsin@google.com> Reported-by:
Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Tom Rix authored
commit 41855a89 upstream. clang static analysis flags this error drivers/gpu/drm/radeon/ci_dpm.c:5652:9: warning: Use of memory after it is freed [unix.Malloc] kfree(rdev->pm.dpm.ps[i].ps_priv); ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/gpu/drm/radeon/ci_dpm.c:5654:2: warning: Attempt to free released memory [unix.Malloc] kfree(rdev->pm.dpm.ps); ^~~~~~~~~~~~~~~~~~~~~~ problem is reported in ci_dpm_fini, with these code blocks. for (i = 0; i < rdev->pm.dpm.num_ps; i++) { kfree(rdev->pm.dpm.ps[i].ps_priv); } kfree(rdev->pm.dpm.ps); The first free happens in ci_parse_power_table where it cleans up locally on a failure. ci_dpm_fini also does a cleanup. ret = ci_parse_power_table(rdev); if (ret) { ci_dpm_fini(rdev); return ret; } So remove the cleanup in ci_parse_power_table and move the num_ps calculation to inside the loop so ci_dpm_fini will know how many array elements to free. Fixes: cc8dbbb4 ("drm/radeon: add dpm support for CI dGPUs (v2)") Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Boris Burkov authored
commit 6bf9cd2e upstream. Under somewhat convoluted conditions, it is possible to attempt to release an extent_buffer that is under io, which triggers a BUG_ON in btrfs_release_extent_buffer_pages. This relies on a few different factors. First, extent_buffer reads done as readahead for searching use WAIT_NONE, so they free the local extent buffer reference while the io is outstanding. However, they should still be protected by TREE_REF. However, if the system is doing signficant reclaim, and simultaneously heavily accessing the extent_buffers, it is possible for releasepage to race with two concurrent readahead attempts in a way that leaves TREE_REF unset when the readahead extent buffer is released. Essentially, if two tasks race to allocate a new extent_buffer, but the winner who attempts the first io is rebuffed by a page being locked (likely by the reclaim itself) then the loser will still go ahead with issuing the readahead. The loser's call to find_extent_buffer must also race with the reclaim task reading the extent_buffer's refcount as 1 in a way that allows the reclaim to re-clear the TREE_REF checked by find_extent_buffer. The following represents an example execution demonstrating the race: CPU0 CPU1 CPU2 reada_for_search reada_for_search readahead_tree_block readahead_tree_block find_create_tree_block find_create_tree_block alloc_extent_buffer alloc_extent_buffer find_extent_buffer // not found allocates eb lock pages associate pages to eb insert eb into radix tree set TREE_REF, refs == 2 unlock pages read_extent_buffer_pages // WAIT_NONE not uptodate (brand new eb) lock_page if !trylock_page goto unlock_exit // not an error free_extent_buffer release_extent_buffer atomic_dec_and_test refs to 1 find_extent_buffer // found try_release_extent_buffer take refs_lock reads refs == 1; no io atomic_inc_not_zero refs to 2 mark_buffer_accessed check_buffer_tree_ref // not STALE, won't take refs_lock refs == 2; TREE_REF set // no action read_extent_buffer_pages // WAIT_NONE clear TREE_REF release_extent_buffer atomic_dec_and_test refs to 1 unlock_page still not uptodate (CPU1 read failed on trylock_page) locks pages set io_pages > 0 submit io return free_extent_buffer release_extent_buffer dec refs to 0 delete from radix tree btrfs_release_extent_buffer_pages BUG_ON(io_pages > 0)!!! We observe this at a very low rate in production and were also able to reproduce it in a test environment by introducing some spurious delays and by introducing probabilistic trylock_page failures. To fix it, we apply check_tree_ref at a point where it could not possibly be unset by a competing task: after io_pages has been incremented. All the codepaths that clear TREE_REF check for io, so they would not be able to clear it after this point until the io is done. Stack trace, for reference: [1417839.424739] ------------[ cut here ]------------ [1417839.435328] kernel BUG at fs/btrfs/extent_io.c:4841! [1417839.447024] invalid opcode: 0000 [#1] SMP [1417839.502972] RIP: 0010:btrfs_release_extent_buffer_pages+0x20/0x1f0 [1417839.517008] Code: ed e9 ... [1417839.558895] RSP: 0018:ffffc90020bcf798 EFLAGS: 00010202 [1417839.570816] RAX: 0000000000000002 RBX: ffff888102d6def0 RCX: 0000000000000028 [1417839.586962] RDX: 0000000000000002 RSI: ffff8887f0296482 RDI: ffff888102d6def0 [1417839.603108] RBP: ffff88885664a000 R08: 0000000000000046 R09: 0000000000000238 [1417839.619255] R10: 0000000000000028 R11: ffff88885664af68 R12: 0000000000000000 [1417839.635402] R13: 0000000000000000 R14: ffff88875f573ad0 R15: ffff888797aafd90 [1417839.651549] FS: 00007f5a844fa700(0000) GS:ffff88885f680000(0000) knlGS:0000000000000000 [1417839.669810] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1417839.682887] CR2: 00007f7884541fe0 CR3: 000000049f609002 CR4: 00000000003606e0 [1417839.699037] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1417839.715187] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1417839.731320] Call Trace: [1417839.737103] release_extent_buffer+0x39/0x90 [1417839.746913] read_block_for_search.isra.38+0x2a3/0x370 [1417839.758645] btrfs_search_slot+0x260/0x9b0 [1417839.768054] btrfs_lookup_file_extent+0x4a/0x70 [1417839.778427] btrfs_get_extent+0x15f/0x830 [1417839.787665] ? submit_extent_page+0xc4/0x1c0 [1417839.797474] ? __do_readpage+0x299/0x7a0 [1417839.806515] __do_readpage+0x33b/0x7a0 [1417839.815171] ? btrfs_releasepage+0x70/0x70 [1417839.824597] extent_readpages+0x28f/0x400 [1417839.833836] read_pages+0x6a/0x1c0 [1417839.841729] ? startup_64+0x2/0x30 [1417839.849624] __do_page_cache_readahead+0x13c/0x1a0 [1417839.860590] filemap_fault+0x6c7/0x990 [1417839.869252] ? xas_load+0x8/0x80 [1417839.876756] ? xas_find+0x150/0x190 [1417839.884839] ? filemap_map_pages+0x295/0x3b0 [1417839.894652] __do_fault+0x32/0x110 [1417839.902540] __handle_mm_fault+0xacd/0x1000 [1417839.912156] handle_mm_fault+0xaa/0x1c0 [1417839.921004] __do_page_fault+0x242/0x4b0 [1417839.930044] ? page_fault+0x8/0x30 [1417839.937933] page_fault+0x1e/0x30 [1417839.945631] RIP: 0033:0x33c4bae [1417839.952927] Code: Bad RIP value. [1417839.960411] RSP: 002b:00007f5a844f7350 EFLAGS: 00010206 [1417839.972331] RAX: 000000000000006e RBX: 1614b3ff6a50398a RCX: 0000000000000000 [1417839.988477] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000002 [1417840.004626] RBP: 00007f5a844f7420 R08: 000000000000006e R09: 00007f5a94aeccb8 [1417840.020784] R10: 00007f5a844f7350 R11: 0000000000000000 R12: 00007f5a94aecc79 [1417840.036932] R13: 00007f5a94aecc78 R14: 00007f5a94aecc90 R15: 00007f5a94aecc40 CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
Boris Burkov <boris@bur.io> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit bdf4d37b which is commit 2bbcaaee upstream. It is being reverted upstream, just hasn't made it there yet and is causing lots of problems. Reported-by:
Hans de Goede <hdegoede@redhat.com> Cc: Qiujun Huang <hqjagain@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Kees Cook authored
commit 63960260 upstream. When evaluating access control over kallsyms visibility, credentials at open() time need to be used, not the "current" creds (though in BPF's case, this has likely always been the same). Plumb access to associated file->f_cred down through bpf_dump_raw_ok() and its callers now that kallsysm_show_value() has been refactored to take struct cred. Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: bpf@vger.kernel.org Cc: stable@vger.kernel.org Fixes: 7105e828 ("bpf: allow for correlation of maps and helpers in dump") Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Kees Cook authored
commit 60f7bb66 upstream. The kprobe show() functions were using "current"'s creds instead of the file opener's creds for kallsyms visibility. Fix to use seq_file->file->f_cred. Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: stable@vger.kernel.org Fixes: 81365a94 ("kprobes: Show address of kprobes if kallsyms does") Fixes: ffb9bd68 ("kprobes: Show blacklist addresses as same as kallsyms does") Signed-off-by:
-
Kees Cook authored
commit b25a7c5a upstream. The printing of section addresses in /sys/module/*/sections/* was not using the correct credentials to evaluate visibility. Before: # cat /sys/module/*/sections/.*text 0xffffffffc0458000 ... # capsh --drop=CAP_SYSLOG -- -c "cat /sys/module/*/sections/.*text" 0xffffffffc0458000 ... After: # cat /sys/module/*/sections/*.text 0xffffffffc0458000 ... # capsh --drop=CAP_SYSLOG -- -c "cat /sys/module/*/sections/.*text" 0x0000000000000000 ... Additionally replaces the existing (safe) /proc/modules check with file->f_cred for consistency. Reported-by:
Dominik Czarnota <dominik.czarnota@trailofbits.com> Fixes: be71eda5 ("module: Fix display of wrong module .text address") Cc: stable@vger.kernel.org Tested-by:
Jessica Yu <jeyu@kernel.org> Acked-by:
-
Kees Cook authored
commit ed66f991 upstream. In order to gain access to the open file's f_cred for kallsym visibility permission checks, refactor the module section attributes to use the bin_attribute instead of attribute interface. Additionally removes the redundant "name" struct member. Cc: stable@vger.kernel.org Reviewed-by:
-
Gustavo A. R. Silva authored
commit 8d1b73dd upstream. One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct module_sect_attrs { ... struct module_sect_attr attrs[0]; }; Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. So, replace the following form: sizeof(*sect_attrs) + nloaded * sizeof(sect_attrs->attrs[0] with: struct_size(sect_attrs, attrs, nloaded) This code was detected with the help of Coccinelle. Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Kees Cook authored
commit 16025184 upstream. In order to perform future tests against the cred saved during open(), switch kallsyms_show_value() to operate on a cred, and have all current callers pass current_cred(). This makes it very obvious where callers are checking the wrong credential in their "read" contexts. These will be fixed in the coming patches. Additionally switch return value to bool, since it is always used as a direct permission check, not a 0-on-success, negative-on-error style function return. Cc: stable@vger.kernel.org Signed-off-by:
-
Sean Christopherson authored
commit 7c83d096 upstream. Mark CR4.TSD as being possibly owned by the guest as that is indeed the case on VMX. Without TSD being tagged as possibly owned by the guest, a targeted read of CR4 to get TSD could observe a stale value. This bug is benign in the current code base as the sole consumer of TSD is the emulator (for RDTSC) and the emulator always "reads" the entirety of CR4 when grabbing bits. Add a build-time assertion in to ensure VMX doesn't hand over more CR4 bits without also updating x86. Fixes: 52ce3c21 ("x86,kvm,vmx: Don't trap writes to CR4.TSD") Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200703040422.31536-2-sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Sean Christopherson authored
commit d74fcfc1 upstream. Inject a #GP on MOV CR4 if CR4.LA57 is toggled in 64-bit mode, which is illegal per Intel's SDM: CR4.LA57 57-bit linear addresses (bit 12 of CR4) ... blah blah blah ... This bit cannot be modified in IA-32e mode. Note, the pseudocode for MOV CR doesn't call out the fault condition, which is likely why the check was missed during initial development. This is arguably an SDM bug and will hopefully be fixed in future release of the SDM. Fixes: fd8cb433 ("KVM: MMU: Expose the LA57 feature to VM.") Cc: stable@vger.kernel.org Reported-by:
Sebastien Boeuf <sebastien.boeuf@intel.com> Signed-off-by:
-
Paolo Bonzini authored
commit 5ecad245 upstream. Bit 8 would be the "global" bit, which does not quite make sense for non-leaf page table entries. Intel ignores it; AMD ignores it in PDEs and PDPEs, but reserves it in PML4Es. Probably, earlier versions of the AMD manual documented it as reserved in PDPEs as well, and that behavior made it into KVM as well as kvm-unit-tests; fix it. Cc: stable@vger.kernel.org Reported-by:
Nadav Amit <namit@vmware.com> Fixes: a0c0feb5 ("KVM: x86: reserve bit 8 of non-leaf PDPEs and PML4Es in 64-bit mode on AMD", 2014-09-03) Signed-off-by:
-
Andrew Scull authored
commit b9e10d4a upstream. HVC_SOFT_RESTART is given values for x0-2 that it should installed before exiting to the new address so should not set x0 to stub HVC success or failure code. Fixes: af42f204 ("arm64: hyp-stub: Zero x0 on successful stub handling") Cc: stable@vger.kernel.org Signed-off-by:
Andrew Scull <ascull@google.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200706095259.1338221-1-ascull@google.comSigned-off-by:
-
Will Deacon authored
commit 68cf6173 upstream. PAGE_HYP_DEVICE is intended to encode attribute bits for an EL2 stage-1 pte mapping a device. Unfortunately, it includes PROT_DEVICE_nGnRE which encodes attributes for EL1 stage-1 mappings such as UXN and nG, which are RES0 for EL2, and DBM which is meaningless as TCR_EL2.HD is not set. Fix the definition of PAGE_HYP_DEVICE so that it doesn't set RES0 bits at EL2. Acked-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Hector Martin authored
commit e337bf19 upstream. These devices claim to be 96kHz mono, but actually are 48kHz stereo with swapped channels and unaligned transfers. Cc: stable@vger.kernel.org Signed-off-by:
Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20200702071433.237843-1-marcan@marcan.stSigned-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Hui Wang authored
commit 6a6ca788 upstream. We have a Dell AIO, there is neither internal speaker nor internal mic, only a multi-function audio jack on it. Users reported that after freshly installing the OS and plug a headset to the audio jack, the headset can't output sound. I reproduced this bug, at that moment, the Input Source is as below: Simple mixer control 'Input Source',0 Capabilities: cenum Items: 'Headphone Mic' 'Headset Mic' Item0: 'Headphone Mic' That is because the patch_realtek will set this audio jack as mic_in mode if Input Source's value is hp_mic. If it is not fresh installing, this issue will not happen since the systemd will run alsactl restore -f /var/lib/alsa/asound.state, this will set the 'Input Source' according to history value. If there is internal speaker or internal mic, this issue will not happen since there is valid sink/source in the pulseaudio, the PA will set the 'Input Source' according to active_port. To fix this issue, change the parser function to let the hs_mic be stored ahead of hp_mic. Cc: stable@vger.kernel.org Signed-off-by:
Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20200625083833.11264-1-hui.wang@canonical.comSigned-off-by:
-
xidongwang authored
commit ad155712 upstream. The stack object “info” in snd_opl3_ioctl() has a leaking problem. It has 2 padding bytes which are not initialized and leaked via “copy_to_user”. Signed-off-by:
xidongwang <wangxidong_97@163.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1594006058-30362-1-git-send-email-wangxidong_97@163.comSigned-off-by:
-
Ido Schimmel authored
[ Upstream commit d9d54202 ] We should not trigger a warning when a memory allocation fails. Remove the WARN_ON(). The warning is constantly triggered by syzkaller when it is injecting faults: [ 2230.758664] FAULT_INJECTION: forcing a failure. [ 2230.758664] name failslab, interval 1, probability 0, space 0, times 0 [ 2230.762329] CPU: 3 PID: 1407 Comm: syz-executor.0 Not tainted 5.8.0-rc2+ #28 ... [ 2230.898175] WARNING: CPU: 3 PID: 1407 at drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:6265 mlxsw_sp_router_fib_event+0xfad/0x13e0 [ 2230.898179] Kernel panic - not syncing: panic_on_warn set ... [ 2230.898183] CPU: 3 PID: 1407 Comm: syz-executor.0 Not tainted 5.8.0-rc2+ #28 [ 2230.898190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Fixes: 3057224e ("mlxsw: spectrum_router: Implement FIB offload in deferred work") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Nicolas Ferre authored
[ Upstream commit ced4799d ] Change the way the "magic-packet" DT property is handled in the macb_probe() function, matching DT binding documentation. Now we mark the device as "wakeup capable" instead of calling the device_init_wakeup() function that would enable the wakeup source. For Ethernet WoL, enabling the wakeup_source is done by using ethtool and associated macb_set_wol() function that already calls device_set_wakeup_enable() for this purpose. That would reduce power consumption by cutting more clocks if "magic-packet" property is set but WoL is not configured by ethtool. Fixes: 3e2a5e15 ("net: macb: add wake-on-lan support via magic packet") Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Harini Katakam <harini.katakam@xilinx.com> Cc: Sergio Prado <sergio.prado@e-labworks.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Davide Caratti authored
[ Upstream commit c8b1d743 ] we need to set 'active_vfs' back to 0, if something goes wrong during the allocation of SR-IOV resources: otherwise, further VF configurations will wrongly assume that bp->pf.vf[x] are valid memory locations, and commands like the ones in the following sequence: # echo 2 >/sys/bus/pci/devices/${ADDR}/sriov_numvfs # ip link set dev ens1f0np0 up # ip link set dev ens1f0np0 vf 0 trust on will cause a kernel crash similar to this: bnxt_en 0000:3b:00.0: not enough MMIO resources for SR-IOV BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 43 PID: 2059 Comm: ip Tainted: G I 5.8.0-rc2.upstream+ #871 Hardware name: Dell Inc. PowerEdge R740/08D89F, BIOS 2.2.11 06/13/2019 RIP: 0010:bnxt_set_vf_trust+0x5b/0x110 [bnxt_en] Code: 44 24 58 31 c0 e8 f5 fb ff ff 85 c0 0f 85 b6 00 00 00 48 8d 1c 5b 41 89 c6 b9 0b 00 00 00 48 c1 e3 04 49 03 9c 24 f0 0e 00 00 <8b> 43 14 89 c2 83 c8 10 83 e2 ef 45 84 ed 49 89 e5 0f 44 c2 4c 89 RSP: 0018:ffffac6246a1f570 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff98b28f538900 RBP: ffff98b28f538900 R08: 0000000000000000 R09: 0000000000000008 R10: ffffffffb9515be0 R11: ffffac6246a1f678 R12: ffff98b28f538000 R13: 0000000000000001 R14: 0000000000000000 R15: ffffffffc05451e0 FS: 00007fde0f688800(0000) GS:ffff98baffd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 000000104bb0a003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: do_setlink+0x994/0xfe0 __rtnl_newlink+0x544/0x8d0 rtnl_newlink+0x47/0x70 rtnetlink_rcv_msg+0x29f/0x350 netlink_rcv_skb+0x4a/0x110 netlink_unicast+0x21d/0x300 netlink_sendmsg+0x329/0x450 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x204/0x280 ___sys_sendmsg+0x88/0xd0 __sys_sendmsg+0x5e/0xa0 do_syscall_64+0x47/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Reported-by:
Fei Liu <feliu@redhat.com> CC: Jonathan Toppins <jtoppins@redhat.com> CC: Michael Chan <michael.chan@broadcom.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Acked-by:
Jonathan Toppins <jtoppins@redhat.com> Signed-off-by:
-
Rahul Lakkireddy authored
[ Upstream commit 76c4d85c ] Convert all-mask IP address to Big Endian, instead, for comparison. Fixes: f286dd8e ("cxgb4: use correct type for all-mask IP address comparison") Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
-
Zheng Bin authored
[ Upstream commit 579dd91a ] When adding first socket to nbd, if nsock's allocation failed, the data structure member "config->socks" was reallocated, but the data structure member "config->num_connections" was not updated. A memory leak will occur then because the function "nbd_config_put" will free "config->socks" only when "config->num_connections" is not zero. Fixes: 03bf73c3 ("nbd: prevent memory leak") Reported-by: syzbot+934037347002901b8d2a@syzkaller.appspotmail.com Signed-off-by:
Zheng Bin <zhengbin13@huawei.com> Reviewed-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Wei Li authored
[ Upstream commit 8523c006 ] After entering kdb due to breakpoint, when we execute 'ss' or 'go' (will delay installing breakpoints, do single-step first), it won't work correctly, and it will enter kdb due to oops. It's because the reason gotten in kdb_stub() is not as expected, and it seems that the ex_vector for single-step should be 0, like what arch powerpc/sh/parisc has implemented. Before the patch: Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry [0]kdb> bp printk Instruction(i) BP #0 at 0xffff8000101486cc (printk) is enabled addr at ffff8000101486cc, hardtype=0 installed=0 [0]kdb> g / # echo h > /proc/sysrq-trigger Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 due to Breakpoint @ 0xffff8000101486cc [3]kdb> ss Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 Oops: (null) due to oops @ 0xffff800010082ab8 CPU: 3 PID: 266 Comm: sh Not tainted 5.7.0-rc4-13839-gf0e5ad491718 #6 Hardware name: linux,dummy-virt (DT) pstate: 00000085 (nzcv daIf -PAN -UAO) pc : el1_irq+0x78/0x180 lr : __handle_sysrq+0x80/0x190 sp : ffff800015003bf0 x29: ffff800015003d20 x28: ffff0000fa878040 x27: 0000000000000000 x26: ffff80001126b1f0 x25: ffff800011b6a0d8 x24: 0000000000000000 x23: 0000000080200005 x22: ffff8000101486cc x21: ffff800015003d30 x20: 0000ffffffffffff x19: ffff8000119f2000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff800015003e50 x7 : 0000000000000002 x6 : 00000000380b9990 x5 : ffff8000106e99e8 x4 : ffff0000fadd83c0 x3 : 0000ffffffffffff x2 : ffff800011b6a0d8 x1 : ffff800011b6a000 x0 : ffff80001130c9d8 Call trace: el1_irq+0x78/0x180 printk+0x0/0x84 write_sysrq_trigger+0xb0/0x118 proc_reg_write+0xb4/0xe0 __vfs_write+0x18/0x40 vfs_write+0xb0/0x1b8 ksys_write+0x64/0xf0 __arm64_sys_write+0x14/0x20 el0_svc_common.constprop.2+0xb0/0x168 do_el0_svc+0x20/0x98 el0_sync_handler+0xec/0x1a8 el0_sync+0x140/0x180 [3]kdb> After the patch: Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry [0]kdb> bp printk Instruction(i) BP #0 at 0xffff8000101486cc (printk) is enabled addr at ffff8000101486cc, hardtype=0 installed=0 [0]kdb> g / # echo h > /proc/sysrq-trigger Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc [0]kdb> g Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc [0]kdb> ss Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to SS trap @ 0xffff800010082ab8 [0]kdb> Fixes: 44679a4f ("arm64: KGDB: Add step debugging support") Signed-off-by:
Wei Li <liwei391@huawei.com> Tested-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
-
Vinod Koul authored
[ Upstream commit f79a732a ] On partial_drain completion we should be in SNDRV_PCM_STATE_RUNNING state, so set that for partially draining streams in snd_compr_drain_notify() and use a flag for partially draining streams While at it, add locks for stream state change in snd_compr_drain_notify() as well. Fixes: f44f2a54 ("ALSA: compress: fix drain calls blocking other compress functions (v6)") Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Tested-by:
Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20200629134737.105993-4-vkoul@kernel.orgSigned-off-by:
-
