- 28 Feb, 2022 19 commits
-
-
Lad Prabhakar authored
Document RZ/V2L SSI bindings. RZ/V2L SSI is identical to one found on the RZ/G2L SoC. No driver changes are required as generic compatible string "renesas,rz-ssi" will be used as a fallback. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by:
Biju Das <biju.das.jz@bp.renesas.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220227225633.28829-1-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Vijendar Mukunda authored
Fixed below smatch static checker warning. sound/soc/amd/vangogh/acp5x-mach.c:190 acp5x_cs35l41_hw_params() error: uninitialized symbol 'ret'. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/20220225193054.24916-4-Vijendar.Mukunda@amd.comSigned-off-by:
-
Vijendar Mukunda authored
Fix checkpatch pl errors and warnings in vangogh machine driver. Signed-off-by:
-
Vijendar Mukunda authored
Update DAI link name as "acp5x-8821-play". Signed-off-by:
-
Vijendar Mukunda authored
The previous condition is used to cross check only the active stream status for I2S HS instance playback and capture use cases. Modified logic to invoke sequence for two i2s controller instances. This also fixes warnings reported by kernel robot: "warning: variable 'frmt_val' set but not used" "warning: variable 'reg_val' set but not used" Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the es8328 driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the inno_rk3036 driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the es8316 driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the wl1273 driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the es7134 driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the twl4030 driver to use more modern terminology for clocking. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20220223003046.1697784-1-broonie@kernel.orgSigned-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the uda1334 driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the uda1380 driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the si476x driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the sti-sas driver to use more modern terminology for clocking. Signed-off-by:
-
Meng Tang authored
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypassed the hierarchical setup and messed up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq(). Signed-off-by:
Meng Tang <tangmeng@uniontech.com> Link: https://lore.kernel.org/r/20220227050928.32270-1-tangmeng@uniontech.comSigned-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the tscs454 driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the tscs42xx driver to use more modern terminology for clocking. Signed-off-by:
-
Mark Brown authored
As part of moving to remove the old style defines for the bus clocks update the lm49453 driver to use more modern terminology for clocking. Signed-off-by:
-
- 25 Feb, 2022 21 commits
-
-
Mark Brown authored
Merge series from Srinivas Kandagatla <srinivas.kandagatla@linaro.org>: This patchset adds support for runtime pm on tx/rx/wsa/wcd lpass macro, wsa881x and wcd938x codecs that are wired up on SoundWire bus. During pm testing it was also found that soundwire clks enabled by lpass macros are not enabling all the required clocks correctly, so last 3 patches corrects them. Tested this on SM8250 MTP along SoundWire In band Headset Button wakeup interrupts.
-
Srinivas Kandagatla authored
under low power state a SoundWire Wake IRQ could trigger MBHC interrupts so make sure that codec is not in suspended state when this happens. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220224111718.6264-17-srinivas.kandagatla@linaro.orgSigned-off-by:
-
Srinivas Kandagatla authored
mark WCD938x as clock stop capable. Signed-off-by:
-
Srinivas Kandagatla authored
Signed-off-by:
-
Srinivas Kandagatla authored
Signed-off-by:
-
Srinivas Kandagatla authored
Signed-off-by:
-
Srinivas Kandagatla authored
Add pm runtime support to VA Macro. Signed-off-by:
-
Srinivas Kandagatla authored
For SoundWire Frame sync to be generated correctly we need both MCLK and MCLKx2 (npl). Without pm runtime enabled these two clocks will remain on, however after adding pm runtime support its possible that NPl clock could be turned off even when SoundWire controller is active. Fix this by enabling mclk and npl clk when SoundWire clks are enabled. Signed-off-by:
-
Srinivas Kandagatla authored
For SoundWire Frame sync to be generated correctly we need both MCLK and MCLKx2 (npl). Without pm runtime enabled these two clocks will remain on, however after adding pm runtime support its possible that NPl clock could be turned off even when SoundWire controller is active. Fix this by enabling mclk and npl clk when SoundWire clks are enabled. Signed-off-by:
-
Srinivas Kandagatla authored
For SoundWire Frame sync to be generated correctly we need both MCLK and MCLKx2 (npl). Without pm runtime enabled these two clocks will remain on, however after adding pm runtime support its possible that NPl clock could be turned off even when SoundWire controller is active. Fix this by enabling mclk and npl clk when SoundWire clks are enabled. Signed-off-by:
-
Srinivas Kandagatla authored
Using bulk clocks and referencing them individually using array index is not great for readers. So move them to individual clocks handling and also remove some unnecessary error handling in the code. Signed-off-by:
-
Srinivas Kandagatla authored
Using bulk clocks and referencing them individually using array index is not great for readers. So move them to individual clocks handling and also remove some unnecessary error handling in the code. Signed-off-by:
-
Srinivas Kandagatla authored
Using bulk clocks and referencing them individually using array index is not great for readers. So move them to individual clocks handling and also remove some unnecessary error handling in the code. Signed-off-by:
-
Srinivas Kandagatla authored
move clk provider registration to managed api variants, this should help with some code tidyup. Signed-off-by:
-
Srinivas Kandagatla authored
move clk provider registration to managed api variants, this should help with some code tidyup. Signed-off-by:
-
Srinivas Kandagatla authored
Using bulk clocks and referencing them individually using array index is not great for readers. So move them to individual clocks handling and also remove some unnecessary error handling in the code. Signed-off-by:
-
Srinivasa Rao Mandadapu authored
Update dev_warn to dev_warn_ratelimit to control excess xrun logging in lpass platform driver. Signed-off-by:
Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Co-developed-by:
Venkata Prasad Potturu <quic_potturu@quicinc.com> Signed-off-by:
-
Jia-Ju Bai authored
The function devm_kzalloc() in acp_legacy_dai_links_create() can fail, so its return value should be checked. Fixes: d4c750f2 ("ASoC: amd: acp: Add generic machine driver support for ACP cards") Reported-by:
TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Link: https://lore.kernel.org/r/20220225131645.27556-1-baijiaju1990@gmail.comSigned-off-by:
-
Jia-Ju Bai authored
The function devm_kzalloc() in rt5663_parse_dp() can fail, so its return value should be checked. Fixes: 457c25ef ("ASoC: rt5663: Add the function of impedance sensing") Reported-by:
-
Peter Ujfalusi authored
Other commit added the declaration of the sof_compressed_ops, drop the instance which added it as Platform specific ops, which the sof_compressed_ops is not. 76cdd90b ("ASoC: SOF: pcm: Add compress_ops for SOF platform component driver") Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20220225120034.11028-1-peter.ujfalusi@linux.intel.comSigned-off-by:
-
Meng Tang authored
platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static allocation of IRQ resources in DT core code, this causes an issue when using hierarchical interrupt domains using "interrupts" property in the node as this bypasses the hierarchical setup and messes up the irq chaining. In preparation for removal of static setup of IRQ resource from DT core code use platform_get_irq_byname(). Signed-off-by:
-
