- 25 Mar, 2019 26 commits
-
-
Maxime Ripard authored
While the USB PHY Device Tree mandates that the name of the VBUS detect pin should be usb0_vbus_det-gpios, a significant number of device tree use usb0_vbus_det-gpio instead. This was functional because the GPIO framework falls back to the gpio suffix that is legacy, but we should fix this. Acked-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com>
-
Maxime Ripard authored
While the USB PHY Device Tree mandates that the name of the ID detect pin should be usb0_id_det-gpios, a significant number of device tree use usb0_id_det-gpio instead. This was functional because the GPIO framework falls back to the gpio suffix that is legacy, but we should fix this. Acked-by:
-
Maxime Ripard authored
The i2c-gpio driver uses named gpios now and the array of GPIOs is deprecated. Switch to the new binding. Acked-by:
-
Maxime Ripard authored
As can be shown by the YAML schema now, the combination of GIC compatibles we were using has never been an option. Switch to the gic-400 variant, which is the more correct option. Acked-by:
-
Maxime Ripard authored
Some nodes still have pinctrl-names entry, yet they don't have any pinctrl group anymore. Drop them. Acked-by:
-
Maxime Ripard authored
Commit 1848f3f4 ("ARM: dts: sun9i: Remove GPIO pinctrl nodes to avoid warnings") was wrong on the optimus, and instead of droping the pinctrl-names property, it dropped the regulator-name one. Obviously, that wasn't what was intended. Reinstate regulator-name and drop pinctrl-names. Fixes: 1848f3f4 ("ARM: dts: sun9i: Remove GPIO pinctrl nodes to avoid warnings") Acked-by:
-
Maxime Ripard authored
Commit 1f8afea8fee0 ("dt-bindings: Add YAML description for Allwinner boards") added an exhaustive list of the valid compatibles used for both the SoCs and boards. We can therefore remove the old documentation, that never got as well updated as it should have. Acked-by: -
Maxime Ripard authored
The A23 and A33 both have an I2C controller in the ARISC domain, that share the same pins with the RSB bus. Even if it's an unusual configuration, that device can be used to drive the PMIC, so let's use it. Acked-by:
-
Maxime Ripard authored
The DSI bindings require that an address cell size of 1, and a size cell of 0. Instead of duplicating it in each and every board DTS file, let's put it in the DTSI. Acked-by:
-
Maxime Ripard authored
We've never had a board compatibles documentation for the Allwinner boards so far. Let's create a json-schema for them. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Maxime Ripard authored
The soc node in the A80 DTSI has a ranges property, but no matching unit address, which results in a DTC warning. Add the unit address to remove that warning. Signed-off-by: -
Maxime Ripard authored
Our display engine endpoints trigger some DTC warnings due to the fact that we're having a single endpoint that doesn't need any reg property, and since we don't have a reg property, we don't need the address-cells and size-cells properties anymore. Fix those Acked-by:
-
Maxime Ripard authored
Our display engine endpoints trigger some DTC warnings due to the fact that we're having a single endpoint that doesn't need any reg property, and since we don't have a reg property, we don't need the address-cells and size-cells properties anymore. Fix those Acked-by:
-
Maxime Ripard authored
Our display engine endpoints trigger some DTC warnings due to the fact that we're having a single endpoint that doesn't need any reg property, and since we don't have a reg property, we don't need the address-cells and size-cells properties anymore. Fix those Acked-by:
-
Maxime Ripard authored
Our display engine endpoints trigger some DTC warnings due to the fact that we're having a single endpoint that doesn't need any reg property, and since we don't have a reg property, we don't need the address-cells and size-cells properties anymore. Fix those Acked-by:
-
Maxime Ripard authored
Our display engine endpoints trigger some DTC warnings due to the fact that we're having a single endpoint that doesn't need any reg property, and since we don't have a reg property, we don't need the address-cells and size-cells properties anymore. Fix those Acked-by:
-
Maxime Ripard authored
Our display engine endpoints trigger some DTC warnings due to the fact that we're having a single endpoint that doesn't need any reg property, and since we don't have a reg property, we don't need the address-cells and size-cells properties anymore. Fix those Acked-by:
-
Maxime Ripard authored
Our display engine endpoints trigger some DTC warnings due to the fact that we're having a single endpoint that doesn't need any reg property, and since we don't have a reg property, we don't need the address-cells and size-cells properties anymore. Fix those Acked-by:
-
Maxime Ripard authored
Since most of the display IPs have a single endpoint, having a reg property, a unit-address and #address-cells and #size-cells will emit a warning. Let's remove those. Acked-by:
-
Maxime Ripard authored
Unlike what the binding for multiple pipeline documents, the A83t doesn't have the cross links between the TCON and the mixers. Let's add them. Acked-by:
-
Priit Laes authored
Make sure that A20 Olimex Lime2 pin bank regulators are properly represented. While pin banks A, B and F are connected to 3.3V static regulator, pin banks E and G tied with LDO3 and LDO4 regulators with 2.8V reference. Signed-off-by:
Priit Laes <priit.laes@paf.com> Signed-off-by:
-
Mans Rullgard authored
Since only one alternative at a time is used, and some functions may not be used at all, this cuts down the size of the board dtb files a bit. Signed-off-by:
Mans Rullgard <mans@mansr.com> Signed-off-by:
-
Mans Rullgard authored
This adds pinctrl settings the EMAC using pins in the PH block. Signed-off-by:
-
Mans Rullgard authored
This adds pinctrl settings for the CAN controller using pins PA16 and PA17. Signed-off-by:
-
Mans Rullgard authored
This adds pinctrl settings for various missing uart options. Signed-off-by:
-
Maxime Ripard authored
Commit d0275214 ("ARM: dts: sun8i-a23-a33: Move NAND controller device node to sort by address") moved the NAND controller node around, but dropped the default muxing in the process. Reintroduce it. Fixes: d0275214 ("ARM: dts: sun8i-a23-a33: Move NAND controller device node to sort by address") Acked-by:
-
- 21 Mar, 2019 1 commit
-
-
Chen-Yu Tsai authored
The A64 datasheet lists the supply rail for the headphone amp's charge pump as "CPVDD". cpvdd-supply is the name of the property for this power rail specified in the device tree bindings. "HPVCC" was the name used in the A33 datasheet for the same function. Rename the supply so it matches the datasheet and bindings. Fixes: c56689e6 ("arm64: dts: allwinner: a64: bananapi-m64: Enable audio codec") Fixes: 6de8e717 ("arm64: dts: allwinner: a64: enable sound on Pinebook") Fixes: 498c21f2 ("arm64: dts: allwinner: a64: enable sound on Pine64 and SoPine") Signed-off-by:
-
- 18 Mar, 2019 2 commits
-
-
Wen Yang authored
The call to of_get_next_child returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./arch/arm/mach-sunxi/platsmp.c:55:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 46, but without a corresponding object release within this function. ./arch/arm/mach-sunxi/platsmp.c:138:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 129, but without a corresponding object release within this function. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Russell King <linux@armlinux.org.uk> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Wen Yang authored
The call to of_get_next_child returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./arch/arm/mach-sunxi/mc_smp.c:110:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 97, but without a corresponding object release within this functio ./arch/arm/mach-sunxi/platsmp.c:138:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 129, but without a corresponding object release within this function Signed-off-by:
-
- 17 Mar, 2019 11 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuildLinus Torvalds authored
Pull more Kbuild updates from Masahiro Yamada: - add more Build-Depends to Debian source package - prefix header search paths with $(srctree)/ - make modpost show verbose section mismatch warnings - avoid hard-coded CROSS_COMPILE for h8300 - fix regression for Debian make-kpkg command - add semantic patch to detect missing put_device() - fix some warnings of 'make deb-pkg' - optimize NOSTDINC_FLAGS evaluation - add warnings about redundant generic-y - clean up Makefiles and scripts * tag 'kbuild-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: remove stale lxdialog/.gitignore kbuild: force all architectures except um to include mandatory-y kbuild: warn redundant generic-y Revert "modsign: Abort modules_install when signing fails" kbuild: Make NOSTDINC_FLAGS a simply expanded variable kbuild: deb-pkg: avoid implicit effects coccinelle: semantic code search for missing put_device() kbuild: pkg: grep include/config/auto.conf instead of $KCONFIG_CONFIG kbuild: deb-pkg: introduce is_enabled and if_enabled_echo to builddeb kbuild: deb-pkg: add CONFIG_ prefix to kernel config options kbuild: add workaround for Debian make-kpkg kbuild: source include/config/auto.conf instead of ${KCONFIG_CONFIG} unicore32: simplify linker script generation for decompressor h8300: use cc-cross-prefix instead of hardcoding h8300-unknown-linux- kbuild: move archive command to scripts/Makefile.lib modpost: always show verbose warning for section mismatch ia64: prefix header search path with $(srctree)/ libfdt: prefix header search paths with $(srctree)/ deb-pkg: generate correct build dependencies
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 asm updates from Thomas Gleixner: "Two cleanup patches removing dead conditionals and unused code" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm: Remove unused __constant_c_x_memset() macro and inlines x86/asm: Remove dead __GNUC__ conditionals
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "Three fixes for the fallout from the TSX errata workaround: - Prevent memory corruption caused by a unchecked out of bound array index. - Two trivial fixes to address compiler warnings" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Make dev_attr_allow_tsx_force_abort static perf/x86: Fixup typo in stub functions perf/x86/intel: Fix memory corruption -
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fix from Juergen Gross: "A fix for a Xen bug introduced by David's series for excluding ballooned pages in vmcores" * tag 'for-linus-5.1b-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: Fix mapping PG_offline pages to user space
-
git://github.com/martinetd/linuxLinus Torvalds authored
Pull 9p updates from Dominique Martinet: "Here is a 9p update for 5.1; there honestly hasn't been much. Two fixes (leak on invalid mount argument and possible deadlock on i_size update on 32bit smp) and a fall-through warning cleanup" * tag '9p-for-5.1' of git://github.com/martinetd/linux: 9p/net: fix memory leak in p9_client_create 9p: use inode->i_lock to protect i_size_write() under 32-bit 9p: mark expected switch fall-through
-
kbuild test robot authored
Fixes: 400816f6 ("perf/x86/intel: Implement support for TSX Force Abort") Signed-off-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: kbuild-all@01.org Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190313184243.GA10820@lkp-sb-ep06
-
Masahiro Yamada authored
When this .gitignore was added, lxdialog was an independent hostprogs-y. Now that all objects in lxdialog/ are directly linked to mconf, the lxdialog is no longer generated. Signed-off-by:Masahiro Yamada <yamada.masahiro@socionext.com>
-
Masahiro Yamada authored
Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes the common Kbuild.asm file. Factor out the duplicated include directives to scripts/Makefile.asm-generic so that no architecture would opt out of the mandatory-y mechanism. um is not forced to include mandatory-y since it is a very exceptional case which does not support UAPI. Signed-off-by: -
Masahiro Yamada authored
The generic-y is redundant under the following condition: - arch has its own implementation - the same header is added to generated-y - the same header is added to mandatory-y If a redundant generic-y is found, the warning like follows is displayed: scripts/Makefile.asm-generic:20: redundant generic-y found in arch/arm/include/asm/Kbuild: timex.h I fixed up arch Kbuild files found by this. Suggested-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
-
Douglas Anderson authored
This reverts commit caf6fe91. The commit was fine but is no longer needed as of commit 3a2429e1 ("kbuild: change if_changed_rule for multi-line recipe"). Let's go back to using ";" to be consistent. For some discussion, see: https://lkml.kernel.org/r/CAK7LNASde0Q9S5GKeQiWhArfER4S4wL1=R_FW8q0++_X3T5=hQ@mail.gmail.comSigned-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
