- 09 May, 2018 40 commits
-
-
Jason Yan authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 2b23d950 ] The intend purpose here was to goto out if smp_execute_task() returned error. Obviously something got screwed up. We will never get these link error statistics below: ~:/sys/class/sas_phy/phy-1:0:12 # cat invalid_dword_count 0 ~:/sys/class/sas_phy/phy-1:0:12 # cat running_disparity_error_count 0 ~:/sys/class/sas_phy/phy-1:0:12 # cat loss_of_dword_sync_count 0 ~:/sys/class/sas_phy/phy-1:0:12 # cat phy_reset_problem_count 0 Obviously we should goto error handler if smp_execute_task() returns non-zero. Fixes: 2908d778 ("[SCSI] aic94xx: new driver") Signed-off-by:
Jason Yan <yanaijie@huawei.com> CC: John Garry <john.garry@huawei.com> CC: chenqilin <chenqilin2@huawei.com> CC: chenxiang <chenxiang66@hisilicon.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Juerg Haefliger <juergh@canonical.com> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com>
-
Jason Yan authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 4a491b1a ] We've got a memory leak with the following producer: while true; do cat /sys/class/sas_phy/phy-1:0:12/invalid_dword_count >/dev/null; done The buffer req is allocated and not freed after we return. Fix it. Fixes: 2908d778 ("[SCSI] aic94xx: new driver") Signed-off-by:
-
Tang Junhui authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 4eca1cb2 ] In such scenario that there are some flash only volumes , and some cached devices, when many tasks request these devices in writeback mode, the write IOs may fall to the same bucket as bellow: | cached data | flash data | cached data | cached data| flash data| then after writeback of these cached devices, the bucket would be like bellow bucket: | free | flash data | free | free | flash data | So, there are many free space in this bucket, but since data of flash only volumes still exists, so this bucket cannot be reclaimable, which would cause waste of bucket space. In this patch, we segregate flash only volume write streams from cached devices, so data from flash only volumes and cached devices can store in different buckets. Compare to v1 patch, this patch do not add a additionally open bucket list, and it is try best to segregate flash only volume write streams from cached devices, sectors of flash only volumes may still be mixed with dirty sectors of cached device, but the number is very small. [mlyle: fixed commit log formatting, permissions, line endings] Signed-off-by:
Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by:
Michael Lyle <mlyle@lyle.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Tang Junhui authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 8d29c442 ] Currently, when a cached device detaching from cache, writeback thread is not stopped, and writeback_rate_update work is not canceled. For example, after the following command: echo 1 >/sys/block/sdb/bcache/detach you can still see the writeback thread. Then you attach the device to the cache again, bcache will create another writeback thread, for example, after below command: echo ba0fb5cd-658a-4533-9806-6ce166d883b9 > /sys/block/sdb/bcache/attach then you will see 2 writeback threads. This patch stops writeback thread and cancels writeback_rate_update work when cached device detaching from cache. Compare with patch v1, this v2 patch moves code down into the register lock for safety in case of any future changes as Coly and Mike suggested. [edit by mlyle: commit log spelling/formatting] Signed-off-by:
-
Roopa Prabhu authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit e0090a9e ] This patch fixes vxlan_snoop to not move permanent fdb entries on learn events. This is consistent with the bridge fdb handling of permanent entries. Fixes: 26a41ae6 ("vxlan: only migrate dynamic FDB entries") Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Stefan Haberland authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit e8ac0155 ] The safe offline processing may hang forever because it waits for I/O which can not be started because of the offline flag that prevents new I/O from being started. Allow I/O to be started during safe offline processing because in this special case we take care that the queues are empty before throwing away the device. Signed-off-by:
Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Bob Moore authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 6f0527b7 ] ACPICA commit ed0389cb11a61e63c568ac1f67948fc6a7bd1aeb An invalid opcode indicates something seriously wrong with the input AML file. The AML parser is immediately confused and lost, causing the resulting parse tree to be ill-formed. The actual disassembly can then cause numerous unrelated errors and faults. This change aborts the disassembly upon discovery of such an opcode during the AML parse phase. Link: https://github.com/acpica/acpica/commit/ed0389cbSigned-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Lv Zheng authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 861ba635 ] ACPICA commit 99bc3beca92c6574ea1d69de42e54f872e6373ce It is reported that on Linux, RTC driver complains wrong errors on hardware reduced platform: [ 4.085420] ACPI Warning: Could not enable fixed event - real_time_clock (4) (20160422/evxface-654) This patch fixes this by correctly adding runtime reduced hardware check. Reported by Chandan Tagore, fixed by Lv Zheng. Link: https://github.com/acpica/acpica/commit/99bc3becTested-by:
Chandan Tagore <tagore.chandan@gmail.com> Signed-off-by:
-
Christophe Jaillet authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit b2cdd8e1 ] 'of_node_put()' should be called on pointer returned by 'of_parse_phandle()' when done. In this function this is done in all path except this 'continue', so add it. Fixes: 97735da0 (drivers: cpuidle: Add status property to ARM idle states) Signed-off-by:
Christophe Jaillet <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Marcel Holtmann authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 313f6888 ] The Broadcom BCM20702 Bluetooth controller in ThinkPad-T530 devices report support for the Set Event Mask Page 2 command, but actually do return an error when trying to use it. < HCI Command: Read Local Supported Commands (0x04|0x0002) plen 0 > HCI Event: Command Complete (0x0e) plen 68 Read Local Supported Commands (0x04|0x0002) ncmd 1 Status: Success (0x00) Commands: 162 entries ... Set Event Mask Page 2 (Octet 22 - Bit 2) ... < HCI Command: Set Event Mask Page 2 (0x03|0x0063) plen 8 Mask: 0x0000000000000000 > HCI Event: Command Complete (0x0e) plen 4 Set Event Mask Page 2 (0x03|0x0063) ncmd 1 Status: Unknown HCI Command (0x01) Since these controllers do not support any feature that would require the event mask page 2 to be modified, it is safe to not send this command at all. The default value is all bits set to zero. T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e6 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=F82FA8E8CFC0 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Reported-by:
Sedat Dilek <sedat.dilek@gmail.com> Tested-by:
Szymon Janc <szymon.janc@codecoup.pl> Signed-off-by:
-
Lorenzo Bianconi authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit c83761ff ] Remove LSM303DLHC, LSM303DLM from st_magn_id_table since LSM303DL series does not support spi interface Fixes: 872e79ad (iio: magn: Add STMicroelectronics magn driver) Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Jag Raman authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 6c95483b ] Orabug: 20902628 When an ldc control-only packet is received during data exchange in read_nonraw(), a new rx head is calculated but the rx queue head is not actually advanced (rx_set_head() is not called) and a branch is taken to 'no_data' at which point two things can happen depending on the value of the newly calculated rx head and the current rx tail: - If the rx queue is determined to be not empty, then the wrong packet is picked up. - If the rx queue is determined to be empty, then a read error (EAGAIN) is eventually returned since it is falsely assumed that more data was expected. The fix is to update the rx head and return in case of a control only packet during data exchange. Signed-off-by:
Jagannathan Raman <jag.raman@oracle.com> Reviewed-by:
Aaron Young <aaron.young@oracle.com> Reviewed-by:
Alexandre Chartre <alexandre.chartre@oracle.com> Reviewed-by:
Bijan Mottahedeh <bijan.mottahedeh@oracle.com> Reviewed-by:
Liam Merwick <liam.merwick@oracle.com> Signed-off-by:
-
Xin Long authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 6dfe4b97 ] Dmitry got the following recursive locking report while running syzkaller fuzzer, the Call Trace: __dump_stack lib/dump_stack.c:16 [inline] dump_stack+0x2ee/0x3ef lib/dump_stack.c:52 print_deadlock_bug kernel/locking/lockdep.c:1729 [inline] check_deadlock kernel/locking/lockdep.c:1773 [inline] validate_chain kernel/locking/lockdep.c:2251 [inline] __lock_acquire+0xef2/0x3430 kernel/locking/lockdep.c:3340 lock_acquire+0x2a1/0x630 kernel/locking/lockdep.c:3755 lock_sock_nested+0xcb/0x120 net/core/sock.c:2536 lock_sock include/net/sock.h:1460 [inline] sctp_close+0xcd/0x9d0 net/sctp/socket.c:1497 inet_release+0xed/0x1c0 net/ipv4/af_inet.c:425 inet6_release+0x50/0x70 net/ipv6/af_inet6.c:432 sock_release+0x8d/0x1e0 net/socket.c:597 __sock_create+0x38b/0x870 net/socket.c:1226 sock_create+0x7f/0xa0 net/socket.c:1237 sctp_do_peeloff+0x1a2/0x440 net/sctp/socket.c:4879 sctp_getsockopt_peeloff net/sctp/socket.c:4914 [inline] sctp_getsockopt+0x111a/0x67e0 net/sctp/socket.c:6628 sock_common_getsockopt+0x95/0xd0 net/core/sock.c:2690 SYSC_getsockopt net/socket.c:1817 [inline] SyS_getsockopt+0x240/0x380 net/socket.c:1799 entry_SYSCALL_64_fastpath+0x1f/0xc2 This warning is caused by the lock held by sctp_getsockopt() is on one socket, while the other lock that sctp_close() is getting later is on the newly created (which failed) socket during peeloff operation. This patch is to avoid this warning by use lock_sock with subclass SINGLE_DEPTH_NESTING as Wang Cong and Marcelo's suggestion. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Suggested-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Suggested-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
-
Mintz, Yuval authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 92f85f05 ] VF clients are configured as enforced, meaning firmware is validating the correctness of their ethertype/vid during transmission. Once txvlan is disabled, VF would start getting SKBs for transmission here vlan is on the payload - but it'll pass the packet's ethertype instead of the vid, leading to firmware declaring it as malicious. Signed-off-by:
Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by:
-
Arnd Bergmann authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 9cc91f21 ] The improved type-checking version of container_of() triggers a warning for xchg_xen_ulong, pointing out that 'xen_ulong_t' is unsigned, but atomic64_t contains a signed value: drivers/xen/events/events_2l.c: In function 'evtchn_2l_handle_events': drivers/xen/events/events_2l.c:187:1020: error: call to '__compiletime_assert_187' declared with attribute error: pointer type mismatch in container_of() This adds a cast to work around the warning. Cc: Ian Abbott <abbotti@mev.co.uk> Fixes: 85323a99 ("xen: arm: mandate EABI and use generic atomic operations.") Fixes: daa2ac80834d ("kernel.h: handle pointers to arrays better in container_of()") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Stefano Stabellini <sstabellini@kernel.org> Reviewed-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Willem de Bruijn authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit fff88030 ] When inheriting tx_flags from one skbuff to another, always apply a mask to avoid overwriting unrelated other bits in the field. The two SKBTX_SHARED_FRAG cases clears all other bits. In practice, tx_flags are zero at this point now. But this is fragile. Timestamp flags are set, for instance, if in tcp_gso_segment, after this clear in skb_segment. The SKBTX_ANY_TSTAMP mask in __skb_tstamp_tx ensures that new skbs do not accidentally inherit flags such as SKBTX_SHARED_FRAG. Signed-off-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Christian Lamparter authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 19d90ece ] This patch fixes a problem where the AR8035 PHY can't be detected on an Cisco Meraki MR24, if the ethernet cable is not connected on boot. Russell Senior provided steps to reproduce the issue: |Disconnect ethernet cable, apply power, wait until device has booted, |plug in ethernet, check for interfaces, no eth0 is listed. | |This appears to be a problem during probing of the AR8035 Phy chip. |When ethernet has no link, the phy detection fails, and eth0 is not |created. Plugging ethernet later has no effect, because there is no |interface as far as the kernel is concerned. The relevant part of |the boot log looks like this: |this is the failing case: | |[ 0.876611] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode |[ 0.882532] /plb/opb/ethernet@ef600c00: reset timeout |[ 0.888546] /plb/opb/ethernet@ef600c00: can't find PHY! |and the succeeding case: | |[ 0.876672] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode |[ 0.883952] eth0: EMAC-0 /plb/opb/ethernet@ef600c00, MAC 00:01:.. |[ 0.890822] eth0: found Atheros 8035 Gigabit Ethernet PHY (0x01) Based on the comment and the commit message of commit 23fbb5a8 ("emac: Fix EMAC soft reset on 460EX/GT"). This is because the AR8035 PHY doesn't provide the TX Clock, if the ethernet cable is not attached. This causes the reset to timeout and the PHY detection code in emac_init_phy() is unable to detect the AR8035 PHY. As a result, the emac driver bails out early and the user left with no ethernet. In order to stay compatible with existing configurations, the driver tries the current reset approach at first. Only if the first attempt timed out, it does perform one more retry with the clock temporarily switched to the internal source for just the duration of the reset. LEDE-Bug: #687 <https://bugs.lede-project.org/index.php?do=details&task_id=687> Cc: Chris Blake <chrisrblake93@gmail.com> Reported-by:
Russell Senior <russell@personaltelco.net> Fixes: 23fbb5a8 ("emac: Fix EMAC soft reset on 460EX/GT") Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
James Wang authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 64604957 ] While installing SLES-12 (based on v4.4), I found that the installer will stall for 60+ seconds during LVM disk scan. The root cause was determined to be the removal of a bound device check in loop_flush() by commit b5dd2f60 ("block: loop: improve performance via blk-mq"). Restoring this check, examining ->lo_state as set by loop_set_fd() eliminates the bad behavior. Test method: modprobe loop max_loop=64 dd if=/dev/zero of=disk bs=512 count=200K for((i=0;i<4;i++))do losetup -f disk; done mkfs.ext4 -F /dev/loop0 for((i=0;i<4;i++))do mkdir t$i; mount /dev/loop$i t$i;done for f in `ls /dev/loop[0-9]*|sort`; do \ echo $f; dd if=$f of=/dev/null bs=512 count=1; \ done Test output: stock patched /dev/loop0 18.1217e-05 8.3842e-05 /dev/loop1 6.1114e-05 0.000147979 /dev/loop10 0.414701 0.000116564 /dev/loop11 0.7474 6.7942e-05 /dev/loop12 0.747986 8.9082e-05 /dev/loop13 0.746532 7.4799e-05 /dev/loop14 0.480041 9.3926e-05 /dev/loop15 1.26453 7.2522e-05 Note that from loop10 onward, the device is not mounted, yet the stock kernel consumes several orders of magnitude more wall time than it does for a mounted device. (Thanks for Mike Galbraith <efault@gmx.de>, give a changelog review.) Reviewed-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
James Wang <jnwang@suse.com> Fixes: b5dd2f60 ("block: loop: improve performance via blk-mq") Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Marcin Nowakowski authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 698b8510 ] When ftrace is used with kprobes, it is possible for a kprobe to contain an invalid location (ie. only initialised to 0 and not to a specific location in the code). Trying to perform a cache flush on such location leads to a crash r4k_flush_icache_range(). Fixes: c1bf207d ("MIPS: kprobe: Add support.") Signed-off-by:
Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16296/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Marcin Nowakowski authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit c56e7a4c ] Space reserved for PKMap should span from PKMAP_BASE to FIXADDR_START. For large page sizes this is not the case as eg. for 64k pages the range currently defined is from 0xfe000000 to 0x102000000(!!) which obviously isn't right. Remove the hardcoded location and set the BASE address as an offset from FIXADDR_START. Since all PKMAP ptes have to be placed in a contiguous memory, ensure that this is the case by placing them all in a single page. This is achieved by aligning the end address to pkmap pages count pages. Signed-off-by:
-
Marcin Nowakowski authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 71eb989a ] fixrange_init operates at PMD-granularity and expects the addresses to be PMD-size aligned, but currently that might not be the case for PKMAP_BASE unless it is defined properly, so ensure a correct alignment is used before passing the address to fixrange_init. fixed mappings: only align the start address that is passed to fixrange_init rather than the value before adding the size, as we may end up with uninitialised upper part of the range. Signed-off-by:
-
Peter Zijlstra authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit ba5213ae ] Andi was asking about PERF_FORMAT_GROUP vs inherited events, which led to the discovery of a bug from commit: 3dab77fb ("perf: Rework/fix the whole read vs group stuff") - PERF_SAMPLE_GROUP = 1U << 4, + PERF_SAMPLE_READ = 1U << 4, - if (attr->inherit && (attr->sample_type & PERF_SAMPLE_GROUP)) + if (attr->inherit && (attr->read_format & PERF_FORMAT_GROUP)) is a clear fail :/ While this changes user visible behaviour; it was previously possible to create an inherited event with PERF_SAMPLE_READ; this is deemed acceptible because its results were always incorrect. Reported-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vince@deater.net> Fixes: 3dab77fb ("perf: Rework/fix the whole read vs group stuff") Link: http://lkml.kernel.org/r/20170530094512.dy2nljns2uq7qa3j@hirez.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Chris Wilson authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 833521eb ] An error during suspend (e100e_pm_suspend), [ 429.994338] ACPI : EC: event blocked [ 429.994633] e1000e: EEE TX LPI TIMER: 00000011 [ 430.955451] pci_pm_suspend(): e1000e_pm_suspend+0x0/0x30 [e1000e] returns -2 [ 430.955454] dpm_run_callback(): pci_pm_suspend+0x0/0x140 returns -2 [ 430.955458] PM: Device 0000:00:19.0 failed to suspend async: error -2 [ 430.955581] PM: Some devices failed to suspend, or early wake event detected [ 430.957709] ACPI : EC: event unblocked lead to complete failure: [ 432.585002] ------------[ cut here ]------------ [ 432.585013] WARNING: CPU: 3 PID: 8372 at kernel/irq/manage.c:1478 __free_irq+0x9f/0x280 [ 432.585015] Trying to free already-free IRQ 20 [ 432.585016] Modules linked in: cdc_ncm usbnet x86_pkg_temp_thermal intel_powerclamp coretemp mii crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep lpc_ich snd_hda_core snd_pcm mei_me mei sdhci_pci sdhci i915 mmc_core e1000e ptp pps_core prime_numbers [ 432.585042] CPU: 3 PID: 8372 Comm: kworker/u16:40 Tainted: G U 4.10.0-rc8-CI-Patchwork_3870+ #1 [ 432.585044] Hardware name: LENOVO 2356GCG/2356GCG, BIOS G7ET31WW (1.13 ) 07/02/2012 [ 432.585050] Workqueue: events_unbound async_run_entry_fn [ 432.585051] Call Trace: [ 432.585058] dump_stack+0x67/0x92 [ 432.585062] __warn+0xc6/0xe0 [ 432.585065] warn_slowpath_fmt+0x4a/0x50 [ 432.585070] ? _raw_spin_lock_irqsave+0x49/0x60 [ 432.585072] __free_irq+0x9f/0x280 [ 432.585075] free_irq+0x34/0x80 [ 432.585089] e1000_free_irq+0x65/0x70 [e1000e] [ 432.585098] e1000e_pm_freeze+0x7a/0xb0 [e1000e] [ 432.585106] e1000e_pm_suspend+0x21/0x30 [e1000e] [ 432.585113] pci_pm_suspend+0x71/0x140 [ 432.585118] dpm_run_callback+0x6f/0x330 [ 432.585122] ? pci_pm_freeze+0xe0/0xe0 [ 432.585125] __device_suspend+0xea/0x330 [ 432.585128] async_suspend+0x1a/0x90 [ 432.585132] async_run_entry_fn+0x34/0x160 [ 432.585137] process_one_work+0x1f4/0x6d0 [ 432.585140] ? process_one_work+0x16e/0x6d0 [ 432.585143] worker_thread+0x49/0x4a0 [ 432.585145] kthread+0x107/0x140 [ 432.585148] ? process_one_work+0x6d0/0x6d0 [ 432.585150] ? kthread_create_on_node+0x40/0x40 [ 432.585154] ret_from_fork+0x2e/0x40 [ 432.585156] ---[ end trace 6712df7f8c4b9124 ]--- The unwind failures stems from commit 28002099 ("e1000e: Refactor PM flows"), but it may be a later patch that introduced the non-recoverable behaviour. Fixes: 28002099 ("e1000e: Refactor PM flows") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99847Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Leonard Crestez authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit b3ea5757 ] Support for imx6ull is already present but it's based on of_machine_is_compatible("fsl,imx6ull") checks. Add it to the MXC_CPU_* enumeration as well. This also fixes /sys/devices/soc0/soc_id reading "Unknown". Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Russell King authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 41408ad5 ] Avoid calling genphy_aneg_done() for PHYs that do not implement the Clause 22 register set. Clause 45 PHYs may implement the Clause 22 register set along with the Clause 22 extension MMD. Hence, we can't simply block access to the Clause 22 functions based on the PHY being a Clause 45 PHY. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
A Sun authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 8e175b22 ] Intermittent RX truncation and loss of IR received data. This resulted in receive stream synchronization errors where driver attempted to incorrectly parse IR data (eg 0x90 below) as command response. [ 3969.139898] mceusb 1-1.2:1.0: processed IR data [ 3969.151315] mceusb 1-1.2:1.0: rx data: 00 90 (length=2) [ 3969.151321] mceusb 1-1.2:1.0: Unknown command 0x00 0x90 [ 3969.151336] mceusb 1-1.2:1.0: rx data: 98 0a 8d 0a 8e 0a 8e 0a 8e 0a 8e 0a 9a 0a 8e 0a 0b 3a 8e 00 80 41 59 00 00 (length=25) [ 3969.151341] mceusb 1-1.2:1.0: Raw IR data, 24 pulse/space samples [ 3969.151348] mceusb 1-1.2:1.0: Storing space with duration 500000 Bug trigger appears to be normal, but heavy, IR receiver use. Signed-off-by:
A Sun <as1033x@comcast.net> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Pan Bian authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 35378ce1 ] In functions cx25840_initialize(), cx231xx_initialize(), and cx23885_initialize(), the return value of create_singlethread_workqueue() is used without validation. This may result in NULL dereference and cause kernel crash. This patch fixes it. Signed-off-by:
Pan Bian <bianpan2016@163.com> Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Jacob Keller authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 5012863b ] The e1000e driver and related hardware has a limitation on Tx PTP packets which requires we limit to timestamping a single packet at once. We do this by verifying that we never request a new Tx timestamp while we still have a tx_hwtstamp_skb pointer. Unfortunately the driver suffers from a race condition around this. The tx_hwtstamp_skb pointer is not set to NULL until after skb_tstamp_tx() is called. This function notifies the stack and applications of a new timestamp. Even a well behaved application that only sends a new request when the first one is finished might be woken up and possibly send a packet before we can free the timestamp in the driver again. The result is that we needlessly ignore some Tx timestamp requests in this corner case. Fix this by assigning the tx_hwtstamp_skb pointer prior to calling skb_tstamp_tx() and use a temporary pointer to hold the timestamped skb until that function finishes. This ensures that the application is not woken up until the driver is ready to begin timestamping a new packet. This ensures that well behaved applications do not accidentally race with condition to skip Tx timestamps. Obviously an application which sends multiple Tx timestamp requests at once will still only timestamp one packet at a time. Unfortunately there is nothing we can do about this. Reported-by:
David Mirabito <davidm@metamako.com> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
-
Robert Jarzmik authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit cbf52a3e ] When the kernel is compiled with an "O=" argument, the object files are not in the source tree, but in the build tree. This patch fixes O= build by looking for object files in the build tree. Fixes: 923e02ec ("scripts/tags.sh: Support compiled source") Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Milian Wolff authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 2538b9e2 ] In some situations the libdw unwinder stopped working properly. I.e. with libunwind we see: ~~~~~ heaptrack_gui 2228 135073.400112: 641314 cycles: e8ed _dl_fixup (/usr/lib/ld-2.25.so) 15f06 _dl_runtime_resolve_sse_vex (/usr/lib/ld-2.25.so) ed94c KDynamicJobTracker::KDynamicJobTracker (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0) 608f3 _GLOBAL__sub_I_kdynamicjobtracker.cpp (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0) f199 call_init.part.0 (/usr/lib/ld-2.25.so) f2a5 _dl_init (/usr/lib/ld-2.25.so) db9 _dl_start_user (/usr/lib/ld-2.25.so) ~~~~~ But with libdw and without this patch this sample is not properly unwound: ~~~~~ heaptrack_gui 2228 135073.400112: 641314 cycles: e8ed _dl_fixup (/usr/lib/ld-2.25.so) 15f06 _dl_runtime_resolve_sse_vex (/usr/lib/ld-2.25.so) ed94c KDynamicJobTracker::KDynamicJobTracker (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0) ~~~~~ Debug output showed me that libdw found a module for the last frame address, but it thinks it belongs to /usr/lib/ld-2.25.so. This patch double-checks what libdw sees and what perf knows. If the mappings mismatch, we now report the elf known to perf. This fixes the situation above, and the libdw unwinder produces the same stack as libunwind. Signed-off-by:
Milian Wolff <milian.wolff@kdab.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20170602143753.16907-1-milian.wolff@kdab.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Namhyung Kim authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 1deec1bd ] When perf processes build-id event, it creates DSOs with the build-id. But it didn't set the module short name (like '[module-name]') so when processing a kernel mmap event of the module, it cannot found the DSO as it only checks the short names. That leads for perf to create a same DSO without the build-id info and it'll lookup the system path even if the DSO is already in the build-id cache. After kernel was updated, perf cannot find the DSO and cannot show symbols in it anymore. You can see this if you have an old data file (w/ old kernel version): $ perf report -i perf.data.old -v |& grep scsi_mod build id event received for /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz : cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 Failed to open /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz, continuing without symbols ... The second message didn't show the build-id. With this patch: $ perf report -i perf.data.old -v |& grep scsi_mod build id event received for /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz: cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 /lib/modules/3.19.2-1-ARCH/kernel/drivers/scsi/scsi_mod.ko.gz with build id cafe1ce6ca13a98a5d9ed3425cde249e57a27fc1 not found, continuing without symbols ... Now it shows the build-id but still cannot load the symbol table. This is a different problem which will be fixed in the next patch. Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: kernel-team@lge.com Link: http://lkml.kernel.org/r/20170531120105.21731-1-namhyung@kernel.org [ Fix the build on older compilers (debian <= 8, fedora <= 21, etc) wrt kmod_path var init ] Signed-off-by:
-
Ido Shamay authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 269f9883 ] The Granular QoS per VF feature must be enabled in FW before it can be used. Thus, the driver cannot modify a QP's qos_vport value (via the UPDATE_QP FW command) if the feature has not been enabled -- the FW returns an error if this is attempted. Fixes: 08068cd5 ("net/mlx4: Added qos_vport QP configuration in VST mode") Signed-off-by:
Ido Shamay <idos@mellanox.com> Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Talat Batheesh authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 6dc06c08 ] Our previous patch (cited below) introduced a regression for RAW Eth QPs. Fix it by checking if the QP number provided by user-space exists, hence allowing steering rules to be added for valid QPs only. Fixes: 89c55768 ("net/mlx4_en: Avoid adding steering rules with invalid ring") Reported-by:
Or Gerlitz <gerlitz.or@gmail.com> Signed-off-by:
Talat Batheesh <talatb@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Haishuang Yan authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit b699d003 ] Since iptunnel_pull_header() can call pskb_may_pull(), we must reload any pointer that was related to skb->head. Fixes: a09a4c8d ("tunnels: Remove encapsulation offloads on decap") Signed-off-by:
Haishuang Yan <yanhaishuang@cmss.chinamobile.com> Signed-off-by:
-
Jason A. Donenfeld authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 48a1df65 ] This is a defense-in-depth measure in response to bugs like 4d6fa57b ("macsec: avoid heap overflow in skb_to_sgvec"). There's not only a potential overflow of sglist items, but also a stack overflow potential, so we fix this by limiting the amount of recursion this function is allowed to do. Not actually providing a bounded base case is a future disaster that we can easily avoid here. As a small matter of house keeping, we take this opportunity to move the documentation comment over the actual function the documentation is for. While this could be implemented by using an explicit stack of skbuffs, when implementing this, the function complexity increased considerably, and I don't think such complexity and bloat is actually worth it. So, instead I built this and tested it on x86, x86_64, ARM, ARM64, and MIPS, and measured the stack usage there. I also reverted the recent MIPS changes that give it a separate IRQ stack, so that I could experience some worst-case situations. I found that limiting it to 24 layers deep yielded a good stack usage with room for safety, as well as being much deeper than any driver actually ever creates. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Howells <dhowells@redhat.com> Cc: Sabrina Dubroca <sd@queasysnail.net> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Dmitry Monakhov authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 3116a23b ] If bio has no data, such as ones from blkdev_issue_flush(), then we have nothing to protect. This patch prevent bugon like follows: kfree_debugcheck: out of range ptr ac1fa1d106742a5ah kernel BUG at mm/slab.c:2773! invalid opcode: 0000 [#1] SMP Modules linked in: bcache CPU: 0 PID: 4428 Comm: xfs_io Tainted: G W 4.11.0-rc4-ext4-00041-g2ef0043-dirty #43 Hardware name: Virtuozzo KVM, BIOS seabios-1.7.5-11.vz7.4 04/01/2014 task: ffff880137786440 task.stack: ffffc90000ba8000 RIP: 0010:kfree_debugcheck+0x25/0x2a RSP: 0018:ffffc90000babde0 EFLAGS: 00010082 RAX: 0000000000000034 RBX: ac1fa1d106742a5a RCX: 0000000000000007 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88013f3ccb40 RBP: ffffc90000babde8 R08: 0000000000000000 R09: 0000000000000000 R10: 00000000fcb76420 R11: 00000000725172ed R12: 0000000000000282 R13: ffffffff8150e766 R14: ffff88013a145e00 R15: 0000000000000001 FS: 00007fb09384bf40(0000) GS:ffff88013f200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd0172f9e40 CR3: 0000000137fa9000 CR4: 00000000000006f0 Call Trace: kfree+0xc8/0x1b3 bio_integrity_free+0xc3/0x16b bio_free+0x25/0x66 bio_put+0x14/0x26 blkdev_issue_flush+0x7a/0x85 blkdev_fsync+0x35/0x42 vfs_fsync_range+0x8e/0x9f vfs_fsync+0x1c/0x1e do_fsync+0x31/0x4a SyS_fsync+0x10/0x14 entry_SYSCALL_64_fastpath+0x1f/0xc2 Reviewed-by:
Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by:
-
Thomas Bogendoerfer authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit e279e6d9 ] sccnxp driver doesn't get the correct uart clock rate, if CONFIG_HAVE_CLOCK is disabled. Correct usage of clk API to make it work with/without it. Fixes: 90efa75f (serial: sccnxp: Using CLK API for getting UART clock) Suggested-by:
Russell King - ARM Linux <linux@armlinux.org.uk> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Ganesh Goudar authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit a97051f4 ] take care of UpDbgLaRdPtr[0-3] restriction for T6. Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
-
Tomi Valkeinen authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit cc8dd766 ] omap_gem uses page alignment for buffer stride. The related calculations are a bit off, though, as byte stride of 4096 gets aligned to 8192, instead of 4096. This patch changes the code to use DIV_ROUND_UP(), which fixes those calculations and makes them more readable. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Jia-Ju Bai authored
BugLink: http://bugs.launchpad.net/bugs/1765010 [ Upstream commit 93818da5 ] The driver may sleep under a read spin lock, and the function call path is: send_socklist (acquire the lock by read_lock) skb_copy(GFP_KERNEL) --> may sleep To fix it, the "GFP_KERNEL" is replaced with "GFP_ATOMIC". Signed-off-by:
Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by:
-
