- 09 May, 2020 9 commits
-
-
Weiping Zhang authored
rename __blk_mq_alloc_rq_map to __blk_mq_alloc_map_and_request, actually it alloc both map and request, make function name align with function. Signed-off-by:
Weiping Zhang <zhangweiping@didiglobal.com> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Ming Lei authored
Alloc new map and request for new hardware queue when increse hardware queue count. Before this patch, it will show a warning for each new hardware queue, but it's not enough, these hctx have no maps and reqeust, when a bio was mapped to these hardware queue, it will trigger kernel panic when get request from these hctx. Test environment: * A NVMe disk supports 128 io queues * 96 cpus in system A corner case can always trigger this panic, there are 96 io queues allocated for HCTX_TYPE_DEFAULT type, the corresponding kernel log: nvme nvme0: 96/0/0 default/read/poll queues. Now we set nvme write queues to 96, then nvme will alloc others(32) queues for read, but blk_mq_update_nr_hw_queues does not alloc map and request for these new added io queues. So when process read nvme disk, it will trigger kernel panic when get request from these hardware context. Reproduce script: nr=$(expr `cat /sys/block/nvme0n1/device/queue_count` - 1) echo $nr > /sys/module/nvme/parameters/write_queues echo 1 > /sys/block/nvme0n1/device/reset_controller dd if=/dev/nvme0n1 of=/dev/null bs=4K count=1 [ 8040.805626] ------------[ cut here ]------------ [ 8040.805627] WARNING: CPU: 82 PID: 12921 at block/blk-mq.c:2578 blk_mq_map_swqueue+0x2b6/0x2c0 [ 8040.805627] Modules linked in: nvme nvme_core nf_conntrack_netlink xt_addrtype br_netfilter overlay xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nft_counter nf_nat_tftp nf_conntrack_tftp nft_masq nf_tables_set nft_fib_inet nft_f ib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack tun bridge nf_defrag_ipv6 nf_defrag_ipv4 stp llc ip6_tables ip_tables nft_compat rfkill ip_set nf_tables nfne tlink sunrpc intel_rapl_msr intel_rapl_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass ipmi_ssif crct10dif_pclmul crc32_pclmul iTCO_wdt iTCO_vendor_support ghash_clmulni_intel intel_ cstate intel_uncore raid0 joydev intel_rapl_perf ipmi_si pcspkr mei_me ioatdma sg ipmi_devintf mei i2c_i801 dca lpc_ich ipmi_msghandler acpi_power_meter acpi_pad xfs libcrc32c sd_mod ast i2c_algo_bit drm_vram_helper drm_ttm_helper ttm d rm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops [ 8040.805637] ahci drm i40e libahci crc32c_intel libata t10_pi wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: nvme_core] [ 8040.805640] CPU: 82 PID: 12921 Comm: kworker/u194:2 Kdump: loaded Tainted: G W 5.6.0-rc5.78317c+ #2 [ 8040.805640] Hardware name: Inspur SA5212M5/YZMB-00882-104, BIOS 4.0.9 08/27/2019 [ 8040.805641] Workqueue: nvme-reset-wq nvme_reset_work [nvme] [ 8040.805642] RIP: 0010:blk_mq_map_swqueue+0x2b6/0x2c0 [ 8040.805643] Code: 00 00 00 00 00 41 83 c5 01 44 39 6d 50 77 b8 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 8b bb 98 00 00 00 89 d6 e8 8c 81 03 00 eb 83 <0f> 0b e9 52 ff ff ff 0f 1f 00 0f 1f 44 00 00 41 57 48 89 f1 41 56 [ 8040.805643] RSP: 0018:ffffba590d2e7d48 EFLAGS: 00010246 [ 8040.805643] RAX: 0000000000000000 RBX: ffff9f013e1ba800 RCX: 000000000000003d [ 8040.805644] RDX: ffff9f00ffff6000 RSI: 0000000000000003 RDI: ffff9ed200246d90 [ 8040.805644] RBP: ffff9f00f6a79860 R08: 0000000000000000 R09: 000000000000003d [ 8040.805645] R10: 0000000000000001 R11: ffff9f0138c3d000 R12: ffff9f00fb3a9008 [ 8040.805645] R13: 000000000000007f R14: ffffffff96822660 R15: 000000000000005f [ 8040.805645] FS: 0000000000000000(0000) GS:ffff9f013fa80000(0000) knlGS:0000000000000000 [ 8040.805646] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8040.805646] CR2: 00007f7f397fa6f8 CR3: 0000003d8240a002 CR4: 00000000007606e0 [ 8040.805647] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8040.805647] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8040.805647] PKRU: 55555554 [ 8040.805647] Call Trace: [ 8040.805649] blk_mq_update_nr_hw_queues+0x31b/0x390 [ 8040.805650] nvme_reset_work+0xb4b/0xeab [nvme] [ 8040.805651] process_one_work+0x1a7/0x370 [ 8040.805652] worker_thread+0x1c9/0x380 [ 8040.805653] ? max_active_store+0x80/0x80 [ 8040.805655] kthread+0x112/0x130 [ 8040.805656] ? __kthread_parkme+0x70/0x70 [ 8040.805657] ret_from_fork+0x35/0x40 [ 8040.805658] ---[ end trace b5f13b1e73ccb5d3 ]--- [ 8229.365135] BUG: kernel NULL pointer dereference, address: 0000000000000004 [ 8229.365165] #PF: supervisor read access in kernel mode [ 8229.365178] #PF: error_code(0x0000) - not-present page [ 8229.365191] PGD 0 P4D 0 [ 8229.365201] Oops: 0000 [#1] SMP PTI [ 8229.365212] CPU: 77 PID: 13024 Comm: dd Kdump: loaded Tainted: G W 5.6.0-rc5.78317c+ #2 [ 8229.365232] Hardware name: Inspur SA5212M5/YZMB-00882-104, BIOS 4.0.9 08/27/2019 [ 8229.365253] RIP: 0010:blk_mq_get_tag+0x227/0x250 [ 8229.365265] Code: 44 24 04 44 01 e0 48 8b 74 24 38 65 48 33 34 25 28 00 00 00 75 33 48 83 c4 40 5b 5d 41 5c 41 5d 41 5e c3 48 8d 68 10 4c 89 ef <44> 8b 60 04 48 89 ee e8 dd f9 ff ff 83 f8 ff 75 c8 e9 67 fe ff ff [ 8229.365304] RSP: 0018:ffffba590e977970 EFLAGS: 00010246 [ 8229.365317] RAX: 0000000000000000 RBX: ffff9f00f6a79860 RCX: ffffba590e977998 [ 8229.365333] RDX: 0000000000000000 RSI: ffff9f012039b140 RDI: ffffba590e977a38 [ 8229.365349] RBP: 0000000000000010 R08: ffffda58ff94e190 R09: ffffda58ff94e198 [ 8229.365365] R10: 0000000000000011 R11: ffff9f00f6a79860 R12: 0000000000000000 [ 8229.365381] R13: ffffba590e977a38 R14: ffff9f012039b140 R15: 0000000000000001 [ 8229.365397] FS: 00007f481c230580(0000) GS:ffff9f013f940000(0000) knlGS:0000000000000000 [ 8229.365415] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8229.365428] CR2: 0000000000000004 CR3: 0000005f35e26004 CR4: 00000000007606e0 [ 8229.365444] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8229.365460] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8229.365476] PKRU: 55555554 [ 8229.365484] Call Trace: [ 8229.365498] ? finish_wait+0x80/0x80 [ 8229.365512] blk_mq_get_request+0xcb/0x3f0 [ 8229.365525] blk_mq_make_request+0x143/0x5d0 [ 8229.365538] generic_make_request+0xcf/0x310 [ 8229.365553] ? scan_shadow_nodes+0x30/0x30 [ 8229.365564] submit_bio+0x3c/0x150 [ 8229.365576] mpage_readpages+0x163/0x1a0 [ 8229.365588] ? blkdev_direct_IO+0x490/0x490 [ 8229.365601] read_pages+0x6b/0x190 [ 8229.365612] __do_page_cache_readahead+0x1c1/0x1e0 [ 8229.365626] ondemand_readahead+0x182/0x2f0 [ 8229.365639] generic_file_buffered_read+0x590/0xab0 [ 8229.365655] new_sync_read+0x12a/0x1c0 [ 8229.365666] vfs_read+0x8a/0x140 [ 8229.365676] ksys_read+0x59/0xd0 [ 8229.365688] do_syscall_64+0x55/0x1d0 [ 8229.365700] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
-
Weiping Zhang authored
blk_mq_realloc_tag_set_tags will update set->nr_hw_queues, so save old set->nr_hw_queues before call this function. Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
-
Weiping Zhang authored
Allocation: __blk_mq_alloc_rq_map blk_mq_alloc_rq_map blk_mq_alloc_rq_map tags = blk_mq_init_tags : kzalloc_node: tags->rqs = kcalloc_node tags->static_rqs = kcalloc_node blk_mq_alloc_rqs p = alloc_pages_node tags->static_rqs[i] = p + offset; Free: blk_mq_free_rq_map kfree(tags->rqs); kfree(tags->static_rqs); blk_mq_free_tags kfree(tags); The page allocated in blk_mq_alloc_rqs cannot be released, so we should use blk_mq_free_map_and_requests here. blk_mq_free_map_and_requests blk_mq_free_rqs __free_pages : cleanup for blk_mq_alloc_rqs blk_mq_free_rq_map : cleanup for blk_mq_alloc_rq_map Signed-off-by:
-
Jens Axboe authored
Pull in block-5.7 fixes for 5.8. Mostly to resolve a conflict with the blk-iocost changes, but we also need the base of the bdi use-after-free as well as we build on top of it. * block-5.7: nvme: fix possible hang when ns scanning fails during error recovery nvme-pci: fix "slimmer CQ head update" bdi: add a ->dev_name field to struct backing_dev_info bdi: use bdi_dev_name() to get device name bdi: move bdi_dev_name out of line vboxsf: don't use the source name in the bdi name iocost: protect iocg->abs_vdebt with iocg->waitq.lock block: remove the bd_openers checks in blk_drop_partitions nvme: prevent double free in nvme_alloc_ns() error handling null_blk: Cleanup zoned device initialization null_blk: Fix zoned command handling block: remove unused header blk-iocost: Fix error on iocost_ioc_vrate_adj bdev: Reduce time holding bd_mutex in sync in blkdev_close() buffer: remove useless comment and WB_REASON_FREE_MORE_MEM, reason. Signed-off-by: -
Sagi Grimberg authored
When the controller is reconnecting, the host fails I/O and admin commands as the host cannot reach the controller. ns scanning may revalidate namespaces during that period and it is wrong to remove namespaces due to these failures as we may hang (see 205da243). One command that may fail is nvme_identify_ns_descs. Since we return success due to having ns identify descriptor list optional, we continue to compare ns identifiers in nvme_revalidate_disk, obviously fail and return -ENODEV to nvme_validate_ns, which will remove the namespace. Exactly what we don't want to happen. Fixes: 22802bf7 ("nvme: Namepace identification descriptor list is optional") Tested-by:
Anton Eidelman <anton@lightbitslabs.com> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Keith Busch <kbusch@kernel.org> Signed-off-by:
-
Alexey Dobriyan authored
Pre-incrementing ->cq_head can't be done in memory because OOB value can be observed by another context. This devalues space savings compared to original code :-\ $ ./scripts/bloat-o-meter ../vmlinux-000 ../obj/vmlinux add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-32 (-32) Function old new delta nvme_poll_irqdisable 464 456 -8 nvme_poll 455 447 -8 nvme_irq 388 380 -8 nvme_dev_disable 955 947 -8 But the code is minimal now: one read for head, one read for q_depth, one increment, one comparison, single instruction phase bit update and one write for new head. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Reported-by:
John Garry <john.garry@huawei.com> Tested-by:
-
Christoph Hellwig authored
Cache a copy of the name for the life time of the backing_dev_info structure so that we can reference it even after unregistering. Fixes: 68f23b89 ("memcg: fix a crash in wb_workfn when a device disappears") Reported-by:
Yufen Yu <yuyufen@huawei.com> Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
-
Yufen Yu authored
Use the common interface bdi_dev_name() to get device name. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
-
- 07 May, 2020 2 commits
-
-
Christoph Hellwig authored
bdi_dev_name is not a fast path function, move it out of line. This prepares for using it from modular callers without having to export an implementation detail like bdi_unknown_name. Signed-off-by:
-
Christoph Hellwig authored
Simplify the bdi name to mirror what we are doing elsewhere, and drop them name in favor of just using a number. This avoids a potentially very long bdi name. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
- 05 May, 2020 1 commit
-
-
Tejun Heo authored
abs_vdebt is an atomic_64 which tracks how much over budget a given cgroup is and controls the activation of use_delay mechanism. Once a cgroup goes over budget from forced IOs, it has to pay it back with its future budget. The progress guarantee on debt paying comes from the iocg being active - active iocgs are processed by the periodic timer, which ensures that as time passes the debts dissipate and the iocg returns to normal operation. However, both iocg activation and vdebt handling are asynchronous and a sequence like the following may happen. 1. The iocg is in the process of being deactivated by the periodic timer. 2. A bio enters ioc_rqos_throttle(), calls iocg_activate() which returns without anything because it still sees that the iocg is already active. 3. The iocg is deactivated. 4. The bio from #2 is over budget but needs to be forced. It increases abs_vdebt and goes over the threshold and enables use_delay. 5. IO control is enabled for the iocg's subtree and now IOs are attributed to the descendant cgroups and the iocg itself no longer issues IOs. This leaves the iocg with stuck abs_vdebt - it has debt but inactive and no further IOs which can activate it. This can end up unduly punishing all the descendants cgroups. The usual throttling path has the same issue - the iocg must be active while throttled to ensure that future event will wake it up - and solves the problem by synchronizing the throttling path with a spinlock. abs_vdebt handling is another form of overage handling and shares a lot of characteristics including the fact that it isn't in the hottest path. This patch fixes the above and other possible races by strictly synchronizing abs_vdebt and use_delay handling with iocg->waitq.lock. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Vlad Dmitriev <vvd@fb.com> Cc: stable@vger.kernel.org # v5.4+ Fixes: e1518f63 ("blk-iocost: Don't let merges push vtime into the future") Signed-off-by:
-
- 04 May, 2020 7 commits
-
-
Christoph Hellwig authored
Instead just call the CDROM layer functionality directly. Signed-off-by:
Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by:
-
Christoph Hellwig authored
Instead just call the CDROM layer functionality directly, and turn the hot mess in isofs_get_last_session into remotely readable code. Signed-off-by:
-
Christoph Hellwig authored
Instead just call the CDROM layer functionality directly. Signed-off-by:
-
Christoph Hellwig authored
Factor out a version of the CDROMMULTISESSION ioctl handler that can be called directly from kernel space. Signed-off-by:
-
Christoph Hellwig authored
Factor out a version of the CDROMREADTOCENTRY ioctl handler that can be called directly from kernel space. Signed-off-by:
-
Christoph Hellwig authored
Give the cdrom_read_tocentry function and ide_ prefix to not conflict with the soon to be added generic function. Signed-off-by:
-
Christoph Hellwig authored
Add a pointer to the CDROM information structure to struct gendisk. This will allow various removable media file systems to call directly into the CDROM layer instead of abusing ioctls with kernel pointers. Signed-off-by:
-
- 30 Apr, 2020 6 commits
-
-
Tejun Heo authored
Wrapping numbers in strings is used by some to work around bit-width issues in some enviroments. The problem isn't innate to json and the workaround seems to cause more integration problems than help. Let's drop the string wrapping. Signed-off-by:
-
Tejun Heo authored
This is to help external tools to decide whether iocost_monitor has all its requirements met or not based on the exit status of an -i0 run. Signed-off-by:
-
Tejun Heo authored
On each IO completion, iocost decides whether the IO met or missed its latency target. Currently, the targets are fixed numbers per IO type. While this can be good enough for loose latency targets way higher than typical completion latencies, the effect of IO size makes it difficult to tighten the latency target - a target adequate for 4k IOs might be too tight for 512k IOs and vice-versa. iocost already has all the necessary information to account for different IO sizes when testing whether the latency target is met as iocost can calculate the size vtime cost of a given IO. This patch updates the completion path to calculate the size vtime cost of the IO, deduct the nsec equivalent from the observed latency and use the adjusted value to decide whether the target is met. This makes latency targets independent from IO size and enables determining adequate latency targets with fixed size fio runs. Signed-off-by:
-
Tejun Heo authored
The use_delay mechanism was introduced by blk-iolatency to hold memory allocators accountable for the reclaim and other shared IOs they cause. The duration of the delay is dynamically balanced between iolatency increasing the value on each target miss and it auto-decaying as time passes and threads get delayed on it. While this works well for iolatency, iocost's control model isn't compatible with it. There is no repeated "violation" events which can be balanced against auto-decaying. iocost instead knows how much a given cgroup is over budget and wants to prevent that cgroup from issuing IOs while over budget. Until now, iocost has been adding the cost of force-issued IOs. However, this doesn't reflect the amount which is already over budget and is simply not enough to counter the auto-decaying allowing anon-memory leaking low priority cgroup to go over its alloted share of IOs. As auto-decaying doesn't make much sense for iocost, this patch introduces a different mode of operation for use_delay - when blkcg_set_delay() are used insted of blkcg_add/use_delay(), the delay duration is not auto-decayed until it is explicitly cleared with blkcg_clear_delay(). iocost is updated to keep the delay duration synchronized to the budget overage amount. With this change, iocost can effectively police cgroups which generate significant amount of force-issued IOs. Signed-off-by:
-
Christoph Hellwig authored
When replacing the bd_super check with a bd_openers I followed a logical conclusion, which turns out to be utterly wrong. When a block device has bd_super sets it has a mount file system on it (although not every mounted file system sets bd_super), but that also implies it doesn't even have partitions to start with. So instead of trying to come up with a logical check for all openers, just remove the check entirely. Fixes: d3ef5536 ("block: fix busy device checking in blk_drop_partitions") Fixes: cb6b771b ("block: fix busy device checking in blk_drop_partitions again") Reported-by:
Michal Koutný <mkoutny@suse.com> Reported-by:
Yang Xu <xuyang2018.jy@cn.fujitsu.com> Signed-off-by:
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fix from Christoph. * 'nvme-5.7' of git://git.infradead.org/nvme: nvme: prevent double free in nvme_alloc_ns() error handling
-
- 29 Apr, 2020 5 commits
-
-
Christoph Hellwig authored
Add a little helper that passes the right nowait flag to blk_queue_enter based on the bio flag, and terminates the bio with the right error code if entering the queue fails. Signed-off-by:
-
Christoph Hellwig authored
BIO_QUEUE_ENTERED is only used for cgroup accounting now, so rename the flag and move setting it into the cgroup code. Signed-off-by:
-
Christoph Hellwig authored
Instead of a convoluted chain just check for REQ_OP_READ directly, and keep all the memory stall code together in a single unlikely branch. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Christoph Hellwig authored
The current documentation is a little weird, as it doesn't clearly explain which function to use, and also has the guts of the information on generic_make_request, which is the internal interface for stacking drivers. Fix this up by properly documenting submit_bio, and only documenting the differences and the use case for generic_make_request. Signed-off-by:
-
Zheng Bin authored
Fix sparse warnings: block/blk-mq-sched.c:209:5: warning: symbol '__blk_mq_sched_dispatch_requests' was not declared. Should it be static? Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zheng Bin <zhengbin13@huawei.com> Reviewed-by:
-
- 27 Apr, 2020 1 commit
-
-
Niklas Cassel authored
When jumping to the out_put_disk label, we will call put_disk(), which will trigger a call to disk_release(), which calls blk_put_queue(). Later in the cleanup code, we do blk_cleanup_queue(), which will also call blk_put_queue(). Putting the queue twice is incorrect, and will generate a KASAN splat. Set the disk->queue pointer to NULL, before calling put_disk(), so that the first call to blk_put_queue() will not free the queue. The second call to blk_put_queue() uses another pointer to the same queue, so this call will still free the queue. Fixes: 85136c01 ("lightnvm: simplify geometry enumeration") Signed-off-by:
Niklas Cassel <niklas.cassel@wdc.com> Signed-off-by:
-
- 25 Apr, 2020 4 commits
-
-
Christoph Hellwig authored
Call blk_mq_make_request when no ->make_request_fn is set. This is safe now that blk_alloc_queue always sets up the pointer for make_request based drivers. This avoids an indirect call in the blk-mq driver I/O fast path, which is rather expensive due to spectre mitigations. Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
The make_request_fn pointer should only be assigned by blk_alloc_queue. Fix a left over manual initialization. Fixes: ff27668c ("bcache: pass the make_request methods to blk_queue_make_request") Signed-off-by:
-
Christoph Hellwig authored
create_io_context just has a single caller, which also happens to not even use the return value. Just open code it there. Signed-off-by:
-
- 24 Apr, 2020 2 commits
-
-
Salman Qazi authored
Flushes bypass the I/O scheduler and get added to hctx->dispatch in blk_mq_sched_bypass_insert. This can happen while a kworker is running hctx->run_work work item and is past the point in blk_mq_sched_dispatch_requests where hctx->dispatch is checked. The blk_mq_do_dispatch_sched call is not guaranteed to end in bounded time, because the I/O scheduler can feed an arbitrary number of commands. Since we have only one hctx->run_work, the commands waiting in hctx->dispatch will wait an arbitrary length of time for run_work to be rerun. A similar phenomenon exists with dispatches from the software queue. The solution is to poll hctx->dispatch in blk_mq_do_dispatch_sched and blk_mq_do_dispatch_ctx and return from the run_work handler and let it rerun. Signed-off-by:
Salman Qazi <sqazi@google.com> Reviewed-by:
-
Christoph Hellwig authored
Each one just has two callers, both in always built-in code. Signed-off-by:
-
- 23 Apr, 2020 2 commits
-
-
Damien Le Moal authored
Move all zoned mode related code from null_blk_main.c to null_blk_zoned.c, avoiding an ugly #ifdef in the process. Rename null_zone_init() into null_init_zoned_dev(), null_zone_exit() into null_free_zoned_dev() and add the new function null_register_zoned_dev() to finalize the zoned dev setup before add_disk(). Signed-off-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by:
-
Damien Le Moal authored
For write operations issued to a null_blk device with zoned mode enabled, the state and write pointer position of the zone targeted by the command should be checked before badblocks and memory backing are handled as the write may be first failed due to, for instance, a sector position not aligned with the zone write pointer. This order of checking for errors reflects more accuratly the behavior of physical zoned devices. Furthermore, the write pointer position of the target zone should be incremented only and only if no errors are reported by badblocks and memory backing handling. To fix this, introduce the small helper function null_process_cmd() which execute null_handle_badblocks() and null_handle_memory_backed() and use this function in null_zone_write() to correctly handle write requests to zoned null devices depending on the type and state of the write target zone. Also call this function in null_handle_zoned() to process read requests to zoned null devices. null_process_cmd() is called directly from null_handle_cmd() for regular null devices, resulting in no functional change for these type of devices. To have symmetric names, the function null_handle_zoned() is renamed to null_process_zoned_cmd(). Signed-off-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by:
-
- 22 Apr, 2020 1 commit
-
-
Christoph Hellwig authored
There are only two callers of blk_rq_map_sg/__blk_rq_map_sg that set the dma_pad value in the queue. Move the handling into those callers instead of burdening the common code, and move the ->extra_len field from struct request to struct scsi_cmnd. Signed-off-by:
-
