Instead of open coding, use device_match_of_node() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220629115840.16241-1-andriy.shevchenko@linux.intel.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add the 'gpio-line-names' property to mt8195-pinctrl, as this will be
used in devicetrees to describe pin names.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220630110453.186526-1-angelogioacchino.delregno@collabora.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

As was already done for MT8192 in commit b52e6953 ("dt-bindings:
pinctrl: mt8192: Add drive-strength-microamp"), replace the custom
mediatek,drive-strength-adv property with the standardized pinconf
'drive-strength-microamp' one.

Similarly to the mt8192 counterpart, there's no user of property
'mediatek,drive-strength-adv', hence removing it is safe.

Fixes: 69c3d58d ("dt-bindings: pinctrl: mt8195: Add mediatek,drive-strength-adv property")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220630131543.225554-1-angelogioacchino.delregno@collabora.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

When this property was introduced, it contained underscores, but
the actual code wants dashes.

Change it from mediatek,rsel_resistance_in_si_unit to
mediatek,rsel-resistance-in-si-unit.

Fixes: 91e7edce ("dt-bindings: pinctrl: mt8195: change pull up/down description")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220630122334.216903-1-angelogioacchino.delregno@collabora.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Remove #ifdef CONFIG_PM and use pm_ptr() macro instead.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220704101253.808519-2-claudiu.beznea@microchip.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Remove #ifdef CONFIG_PM_SLEEP and use pm_sleep_ptr() macro instead.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220704101253.808519-1-claudiu.beznea@microchip.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The Allwinner H616 SoC contains a VCC_PI pin, which supplies the voltage
for GPIO port I.
Extend the range of supply port names to include vcc-pi-supply to cover
that.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220708105235.3983266-5-andre.przywara@arm.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The R_PIO pinctrl device on the Allwinner H616 SoC does not have an
interrupt (it features only two pins).
However the binding requires at least naming one upstream interrupt,
plus the #interrupt-cells and interrupt-controller properties.

Drop the unconditional requirement for the interrupt properties, and
make them dependent on being not this particular pinctrl device.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20220708105235.3983266-3-andre.przywara@arm.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Make it possible to control pins using the TLMM block in the MSM8909 SoC
by adding the necessary definitions for GPIOs, groups and functions.

The driver is originally taken from the msm-4.9 release [1] from Qualcomm,
but cleaned up significantly with several fixes and clarifications.

[1]: https://git.codelinaro.org/clo/la/kernel/msm-4.9/-/blob/LF.UM.8.7-22500-8x09.0/drivers/pinctrl/qcom/pinctrl-msm8909.cSigned-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220628145502.4158234-3-stephan.gerhold@kernkonzept.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Document the "qcom,msm8909-tlmm" compatible for the TLMM/pin control
block in the MSM8909 SoC, together with the allowed GPIOs and functions.
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220628145502.4158234-2-stephan.gerhold@kernkonzept.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The pinctrl dt_node_to_map method may be called in parallel which leads
us to call pinconf_generic_add_group and pinconf_generic_add_function
in parallel. This is not supported though and leads to errors, so add a
mutex to serialize these calls.
Signed-off-by: Jianlong Huang <jianlong.huang@starfivetech.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Link: https://lore.kernel.org/r/20220627085333.1774396-1-emil.renner.berthing@canonical.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'renesas-pinctrl-for-v5.20-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel

pinctrl: renesas: Updates for v5.20 (take two)

  - Add support for the RZ/V2M and R-Car V4H SoCs,
  - Miscellaneous fixes and improvements.

Remove contact information.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/r/20220613064127.220416-4-Basavaraj.Natikar@amd.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Saving/restoring interrupt and wake status bits across suspend can
cause the suspend to fail if an IRQ is serviced across the
suspend cycle.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Fixes: 79d2c8be ("pinctrl/amd: save pin registers over suspend/resume")
Link: https://lore.kernel.org/r/20220613064127.220416-3-Basavaraj.Natikar@amd.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Use devm_platform_get_and_ioremap_resource() to simplify code.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/r/20220613064127.220416-2-Basavaraj.Natikar@amd.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'intel-pinctrl-v5.20-1' of gitolite.kernel.org:pub/scm/linux/kernel/git/pinctrl/intel into devel

intel-pinctrl for v5.20-1

* Update MAINTAINERS to set the Intel pin control status to Supported
* Switch Intel pin control drivers to use struct pingroup

The following is an automated git shortlog grouped by driver:

baytrail:
 -  Switch to to embedded struct pingroup

cherryview:
 -  Switch to to embedded struct pingroup

intel:
 -  Add Intel Meteor Lake pin controller support
 -  Drop no more used members of struct intel_pingroup
 -  Switch to to embedded struct pingroup
 -  Embed struct pingroup into struct intel_pingroup

lynxpoint:
 -  Switch to to embedded struct pingroup

MAINTAINERS:
 -  Update Intel pin control to Supported

Merge branch 'ib-v5.20-amd-pinctrl':
 - Merge branch 'ib-v5.20-amd-pinctrl'

merrifield:
 -  Switch to to embedded struct pingroup

Commit 6c846d02 ("gpio: Don't fiddle with irqchips marked as
immutable") added a warning to indicate if the gpiolib is altering the
internals of irqchips.

Following this change the following warning is now observed for the SPMI
PMIC pinctrl driver:
gpio gpiochip1: (200f000.spmi:pmic@0:gpio@c000): not an immutable chip, please consider fixing it!

Fix this by making the irqchip in the SPMI PMIC pinctrl driver immutable.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20220624195112.894916-1-robimarko@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

AVB1 needs MODSEL6, AVB2 needs MODSEL5 settings.
This patch adds missing MODSELx settings for the affected pins.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87k08xsj81.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

TSN0 needs MODSEL4 settings.
This patch adds missing MODSELx settings for the affected pins.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87letdsj8e.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

This patch adds missing ERROROUTC_A settings.
Current existing ERROROUTC should be _B, this patch tidies it up.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87mtdtsj8m.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

R-Car V4H has PWM/PWM_A/PWM_B, but current PFC setting is mixed.
This patch adds missing PWM settings, and tidies these up.

According to Document, GP3_14 Function4 is PWM2_A,
but we can't select it at P1SR3[27:24].
This patch just ignore it for now.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o7y9sj90.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

This patch adds missing FlexRay pins.
Because Document (Rev.0.51) has 2x FXR_TXENA/B pin with no suffix (_A, _B),
this patch names them as _X.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pmipsj9a.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

This patch adds missing TPU0TOx_A.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r135sj9j.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

This patch adds missing CANFD5_B.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sfnlsj9t.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

This patch adds missing SCIF1_X.
Because Document (Rev.0.51) has 2x SCIF1 with no suffix (_A, _B),
this patch names it as _X.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tu81sja1.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

R-Car V4H has SCIF3 and SCIF3_A, but current PFC setting is mixed.
This patch cleans up SCIF3/SCIF3_A, based on Rev.0.51.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v8shsja7.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

This patch adds missing HSCIF1.
Because Document (Rev.0.51) has 2x HSCIF1 with no suffix (_A, _B),
this patch names it as _X.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wncxsjah.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

This patch adds missing HSCIF3_A.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y1xdsjar.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

This patch adds missing IRQx_A/IRQx_B, and tidies up existing IRQs.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zghtsjb4.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

This patch adds missing TCLKx_A/TCLKx_B/TCLKx_X.

Because Document (Rev.0.51) has 2x TCLK3/TCLK4 with no suffix (_A, _B),
this patch names them as _X.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871qv5txvt.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

According to Rev.0.51 datasheet 004_R-CarV4H_pin_function.xlsx,
GP1_23 - GP1_28 are 1.8/3.3V.  But they are not on Table 7.28.
According to the HW team, there are no bits assigned.
This patch follows HW team's comment.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8735fltxwg.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Remove POC2 which is not documented, and remove TD0SEL3 which is not
needed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874k01txy9.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Current R-Car V4H PFC code has many MOD_SELx definitions with all 0.
But these have no meaning.  This patch removes them.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875ykhtxym.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Current R-Car V4H PFC code has many IPxSRx definitions with all 0.
But these have no meaning.  This patch removes them.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877d4xtxyv.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Current R-Car V4H PFC code has many NOGP definitions.  But these are not
used, and they are different from original usage.  This patch removes
them.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878rpdtxz8.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

MODSEL8 controls I2C vs. GPIO modes, and the Datasheet (Rev.0.51) is
indicating that I2C needs 1.  But we should use 0 for all cases in
reality.  New Datasheet should be updated.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a69ttxzg.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

This patch adds SCIF, I2C, EthernetAVB, HSCIF, MMC, QSPI, MSIOF, PWM,
CAN-FD, Ethernet-TSN, PCIe pins, groups, and functions.

This patch was created based on the Rev.0.51 datasheet.
Signed-off-by: Phong Hoang <phong.hoang.wz@renesas.com>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Thanh Quan <thanh.quan.xn@renesas.com>
Signed-off-by: CongDang <cong.dang.xn@renesas.com>
Signed-off-by: Kazuya Mizuguch <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Tho Vu <tho.vu.wh@renesas.com>
[Morimoto: merged above patches into one, cleanup white space, sort modules alphabetically, fixup comments]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bku9ty0b.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

This patch adds initial pinctrl support for the R-Car V4H (R8A779G0)
SoC, including bias, drive strength and voltage control.

This patch was created based on the Rev.0.51 datasheet.
Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[Morimoto: merge Kihara-san's MODSEL8 fixup patch, cleanup white space, care about reserved bits on each configs, fixup comments, etc.]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87czepty0j.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Add PORT_GP_CFG_13() and PORT_GP_13() helper macros, to be used by the
r8a779g0 subdriver.

Based on a larger patch in the BSP by LUU HOAI.
Signed-off-by: LUU HOAI <hoai.luu.ub@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87edz5ty0r.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Document Pin Function Controller (PFC) support for the Renesas R-Car V4H
(R8A779G0) SoC.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87fsjlty13.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>