- 07 Jul, 2014 27 commits
-
-
Jeff Layton authored
commit a0ef5e19 upstream. Currently when we are processing a request, we try to scrape an expired or over-limit entry off the list in preference to allocating a new one from the slab. This is unnecessarily complicated. Just use the slab layer. Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Trond Myklebust authored
commit 43b6535e upstream. Fix a bug, whereby nfs_update_inode() was declaring the inode to be up to date despite not having checked all the attributes. The bug occurs because the temporary variable in which we cache the validity information is 'sanitised' before reapplying to nfsi->cache_validity. Reported-by:
Kinglong Mee <kinglongmee@gmail.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Christoph Hellwig authored
commit 12337901 upstream. Note nobody's ever noticed because the typical client probably never requests FILES_AVAIL without also requesting something else on the list. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
J. Bruce Fields authored
commit 48385408 upstream. 27b11428 ("nfsd4: remove lockowner when removing lock stateid") introduced a memory leak. Reported-by:
Jeff Layton <jeff.layton@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit 6df200f5 upstream. Return the NULL pointer when the allocation fails. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Trond Myklebust authored
commit c789102c upstream. If the accept() call fails, we need to put the module reference. Signed-off-by:
-
Bart Van Assche authored
commit 60e1751c upstream. Avoid that closing /dev/infiniband/umad<n> or /dev/infiniband/issm<n> triggers a use-after-free. __fput() invokes f_op->release() before it invokes cdev_put(). Make sure that the ib_umad_device structure is freed by the cdev_put() call instead of f_op->release(). This avoids that changing the port mode from IB into Ethernet and back to IB followed by restarting opensmd triggers the following kernel oops: general protection fault: 0000 [#1] PREEMPT SMP RIP: 0010:[<ffffffff810cc65c>] [<ffffffff810cc65c>] module_put+0x2c/0x170 Call Trace: [<ffffffff81190f20>] cdev_put+0x20/0x30 [<ffffffff8118e2ce>] __fput+0x1ae/0x1f0 [<ffffffff8118e35e>] ____fput+0xe/0x10 [<ffffffff810723bc>] task_work_run+0xac/0xe0 [<ffffffff81002a9f>] do_notify_resume+0x9f/0xc0 [<ffffffff814b8398>] int_signal+0x12/0x17 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=75051Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Yann Droneaud <ydroneaud@opteya.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Bart Van Assche authored
commit 8ec0a0e6 upstream. Avoid leaking a kref count in ib_umad_open() if port->ib_dev == NULL or if nonseekable_open() fails. Avoid leaking a kref count, that sm_sem is kept down and also that the IB_PORT_SM capability mask is not cleared in ib_umad_sm_open() if nonseekable_open() fails. Since container_of() never returns NULL, remove the code that tests whether container_of() returns NULL. Moving the kref_get() call from the start of ib_umad_*open() to the end is safe since it is the responsibility of the caller of these functions to ensure that the cdev pointer remains valid until at least when these functions return. Signed-off-by:
-
Bart Van Assche authored
commit 024ca901 upstream. Avoid that the loops that iterate over the request ring can encounter a pointer to a SCSI command in req->scmnd that is no longer associated with that request. If the function srp_unmap_data() is invoked twice for a SCSI command that is not in flight then that would cause ib_fmr_pool_unmap() to be invoked with an invalid pointer as argument, resulting in a kernel oops. Reported-by:
Sagi Grimberg <sagig@mellanox.com> Reference: http://thread.gmane.org/gmane.linux.drivers.rdma/19068/focus=19069Signed-off-by:
-
Dennis Dalessandro authored
commit 7e6d3e5c upstream. This patch addresses an issue where the legacy diagpacket is sent in from the user, but the driver operates on only the extended diagpkt. This patch specifically initializes the extended diagpkt based on the legacy packet. Reported-by:
Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Reviewed-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Mike Marciniszyn authored
commit 911eccd2 upstream. The code used a literal 1 in dispatching an IB_EVENT_PKEY_CHANGE. As of the dual port qib QDR card, this is not necessarily correct. Change to use the port as specified in the call. Reported-by:
Alex Estrin <alex.estrin@intel.com> Reviewed-by:
-
Gabor Juhos authored
commit 23afeb61 upstream. On some AR934x based systems, where the frequency of the AHB bus is relatively high, the built-in watchdog causes a spurious restart when it gets enabled. The possible cause of these restarts is that the timeout value written into the TIMER register does not reaches the hardware in time. Add an explicit delay into the ath79_wdt_enable function to avoid the spurious restarts. Signed-off-by:
Gabor Juhos <juhosg@openwrt.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be> Signed-off-by:
-
Viresh Kumar authored
commit 938626d9 upstream. Implementation of ->set_timeout() is supposed to set 'timeout' field of 'struct watchdog_device' passed to it. sp805 was rather setting this in a local variable. Fix it. Reported-by:
Arun Ramamurthy <arun.ramamurthy@broadcom.com> Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by:
-
hujianyang authored
commit 72abc8f4 upstream. I hit the same assert failed as Dolev Raviv reported in Kernel v3.10 shows like this: [ 9641.164028] UBIFS assert failed in shrink_tnc at 131 (pid 13297) [ 9641.234078] CPU: 1 PID: 13297 Comm: mmap.test Tainted: G O 3.10.40 #1 [ 9641.234116] [<c0011a6c>] (unwind_backtrace+0x0/0x12c) from [<c000d0b0>] (show_stack+0x20/0x24) [ 9641.234137] [<c000d0b0>] (show_stack+0x20/0x24) from [<c0311134>] (dump_stack+0x20/0x28) [ 9641.234188] [<c0311134>] (dump_stack+0x20/0x28) from [<bf22425c>] (shrink_tnc_trees+0x25c/0x350 [ubifs]) [ 9641.234265] [<bf22425c>] (shrink_tnc_trees+0x25c/0x350 [ubifs]) from [<bf2245ac>] (ubifs_shrinker+0x25c/0x310 [ubifs]) [ 9641.234307] [<bf2245ac>] (ubifs_shrinker+0x25c/0x310 [ubifs]) from [<c00cdad8>] (shrink_slab+0x1d4/0x2f8) [ 9641.234327] [<c00cdad8>] (shrink_slab+0x1d4/0x2f8) from [<c00d03d0>] (do_try_to_free_pages+0x300/0x544) [ 9641.234344] [<c00d03d0>] (do_try_to_free_pages+0x300/0x544) from [<c00d0a44>] (try_to_free_pages+0x2d0/0x398) [ 9641.234363] [<c00d0a44>] (try_to_free_pages+0x2d0/0x398) from [<c00c6a60>] (__alloc_pages_nodemask+0x494/0x7e8) [ 9641.234382] [<c00c6a60>] (__alloc_pages_nodemask+0x494/0x7e8) from [<c00f62d8>] (new_slab+0x78/0x238) [ 9641.234400] [<c00f62d8>] (new_slab+0x78/0x238) from [<c031081c>] (__slab_alloc.constprop.42+0x1a4/0x50c) [ 9641.234419] [<c031081c>] (__slab_alloc.constprop.42+0x1a4/0x50c) from [<c00f80e8>] (kmem_cache_alloc_trace+0x54/0x188) [ 9641.234459] [<c00f80e8>] (kmem_cache_alloc_trace+0x54/0x188) from [<bf227908>] (do_readpage+0x168/0x468 [ubifs]) [ 9641.234553] [<bf227908>] (do_readpage+0x168/0x468 [ubifs]) from [<bf2296a0>] (ubifs_readpage+0x424/0x464 [ubifs]) [ 9641.234606] [<bf2296a0>] (ubifs_readpage+0x424/0x464 [ubifs]) from [<c00c17c0>] (filemap_fault+0x304/0x418) [ 9641.234638] [<c00c17c0>] (filemap_fault+0x304/0x418) from [<c00de694>] (__do_fault+0xd4/0x530) [ 9641.234665] [<c00de694>] (__do_fault+0xd4/0x530) from [<c00e10c0>] (handle_pte_fault+0x480/0xf54) [ 9641.234690] [<c00e10c0>] (handle_pte_fault+0x480/0xf54) from [<c00e2bf8>] (handle_mm_fault+0x140/0x184) [ 9641.234716] [<c00e2bf8>] (handle_mm_fault+0x140/0x184) from [<c0316688>] (do_page_fault+0x150/0x3ac) [ 9641.234737] [<c0316688>] (do_page_fault+0x150/0x3ac) from [<c000842c>] (do_DataAbort+0x3c/0xa0) [ 9641.234759] [<c000842c>] (do_DataAbort+0x3c/0xa0) from [<c0314e38>] (__dabt_usr+0x38/0x40) After analyzing the code, I found a condition that may cause this failed in correct operations. Thus, I think this assertion is wrong and should be removed. Suppose there are two clean znodes and one dirty znode in TNC. So the per-filesystem atomic_t @clean_zn_cnt is (2). If commit start, dirty_znode is set to COW_ZNODE in get_znodes_to_commit() in case of potentially ops on this znode. We clear COW bit and DIRTY bit in write_index() without @tnc_mutex locked. We don't increase @clean_zn_cnt in this place. As the comments in write_index() shows, if another process hold @tnc_mutex and dirty this znode after we clean it, @clean_zn_cnt would be decreased to (1). We will increase @clean_zn_cnt to (2) with @tnc_mutex locked in free_obsolete_znodes() to keep it right. If shrink_tnc() performs between decrease and increase, it will release other 2 clean znodes it holds and found @clean_zn_cnt is less than zero (1 - 2 = -1), then hit the assertion. Because free_obsolete_znodes() will soon correct @clean_zn_cnt and no harm to fs in this case, I think this assertion could be removed. 2 clean zondes and 1 dirty znode, @clean_zn_cnt == 2 Thread A (commit) Thread B (write or others) Thread C (shrinker) ->write_index ->clear_bit(DIRTY_NODE) ->clear_bit(COW_ZNODE) @clean_zn_cnt == 2 ->mutex_locked(&tnc_mutex) ->dirty_cow_znode ->!ubifs_zn_cow(znode) ->!test_and_set_bit(DIRTY_NODE) ->atomic_dec(&clean_zn_cnt) ->mutex_unlocked(&tnc_mutex) @clean_zn_cnt == 1 ->mutex_locked(&tnc_mutex) ->shrink_tnc ->destroy_tnc_subtree ->atomic_sub(&clean_zn_cnt, 2) ->ubifs_assert <- hit ->mutex_unlocked(&tnc_mutex) @clean_zn_cnt == -1 ->mutex_lock(&tnc_mutex) ->free_obsolete_znodes ->atomic_inc(&clean_zn_cnt) ->mutux_unlock(&tnc_mutex) @clean_zn_cnt == 0 (correct after shrink) Signed-off-by:
hujianyang <hujianyang@huawei.com> Signed-off-by:
Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by:
-
hujianyang authored
commit 691a7c6f upstream. There is a race condition in UBIFS: Thread A (mmap) Thread B (fsync) ->__do_fault ->write_cache_pages -> ubifs_vm_page_mkwrite -> budget_space -> lock_page -> release/convert_page_budget -> SetPagePrivate -> TestSetPageDirty -> unlock_page -> lock_page -> TestClearPageDirty -> ubifs_writepage -> do_writepage -> release_budget -> ClearPagePrivate -> unlock_page -> !(ret & VM_FAULT_LOCKED) -> lock_page -> set_page_dirty -> ubifs_set_page_dirty -> TestSetPageDirty (set page dirty without budgeting) -> unlock_page This leads to situation where we have a diry page but no budget allocated for this page, so further write-back may fail with -ENOSPC. In this fix we return from page_mkwrite without performing unlock_page. We return VM_FAULT_LOCKED instead. After doing this, the race above will not happen. Signed-off-by:
Laurence Withers <lwithers@guralp.com> Signed-off-by:
-
Markos Chandras authored
commit ab6c15bc upstream. Previously, the lower limit for the MIPS SC initialization loop was set incorrectly allowing one extra loop leading to writes beyond the MSC ioremap'd space. More precisely, the value of the 'imp' in the last loop increased beyond the msc_irqmap_t boundaries and as a result of which, the 'n' variable was loaded with an incorrect value. This value was used later on to calculate the offset in the MSC01_IC_SUP which led to random crashes like the following one: CPU 0 Unable to handle kernel paging request at virtual address e75c0200, epc == 8058dba4, ra == 8058db90 [...] Call Trace: [<8058dba4>] init_msc_irqs+0x104/0x154 [<8058b5bc>] arch_init_irq+0xd8/0x154 [<805897b0>] start_kernel+0x220/0x36c Kernel panic - not syncing: Attempted to kill the idle task! This patch fixes the problem Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7118/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Alex Smith authored
commit 91ad11d7 upstream. On MIPS calls to _mcount in modules generate 2 instructions to load the _mcount address (and therefore 2 relocations). The mcount_loc table should only reference the first of these, so the second is filtered out by checking the relocation offset and ignoring ones that immediately follow the previous one seen. However if a module has an _mcount call at offset 0, the second relocation would not be filtered out due to old_r_offset == 0 being taken to mean that the current relocation is the first one seen, and both would end up in the mcount_loc table. This results in ftrace_make_nop() patching both (adjacent) instructions to branches over the _mcount call sequence like so: 0xffffffffc08a8000: 04 00 00 10 b 0xffffffffc08a8014 0xffffffffc08a8004: 04 00 00 10 b 0xffffffffc08a8018 0xffffffffc08a8008: 2d 08 e0 03 move at,ra ... The second branch is in the delay slot of the first, which is defined to be unpredictable - on the platform on which this bug was encountered, it triggers a reserved instruction exception. Fix by initializing old_r_offset to ~0 and using that instead of 0 to determine whether the current relocation is the first seen. Signed-off-by:
Alex Smith <alex.smith@imgtec.com> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7098/Signed-off-by:
-
Asai Thambi S P authored
commit af5ded8c upstream. In module exit, dfs_parent and it's subtree were removed before unregistering with pci. When debugfs entry for each device is attempted to remove in pci_remove() context, they don't exist, as dfs_parent and its children were already ripped apart. Modified to first unregister with pci and then remove dfs_parent. Signed-off-by:
Asai Thambi S P <asamymuthupa@micron.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Asai Thambi S P authored
commit 670a6414 upstream. Increased timeout for STANDBY IMMEDIATE command to 2 minutes. Signed-off-by:
Selvan Mani <smani@micron.com> Signed-off-by:
-
Asai Thambi S P authored
commit d1e714db upstream. A hardware quirk in P320h/P420m interfere with PCIe transactions on some AMD chipsets, making P320h/P420m unusable. This workaround is to disable ERO and NoSnoop bits in the parent and root complex for normal functioning of these devices NOTE: This workaround is specific to AMD chipset with a PCIe upstream device with device id 0x5aXX Signed-off-by:
Sam Bradshaw <sbradshaw@micron.com> Signed-off-by:
-
Bjorn Helgaas authored
commit 67ebd814 upstream. 3448a19d "vgaarb: use bridges to control VGA routing where possible" added the "flags & PCI_VGA_STATE_CHANGE_DECODES" condition to an existing WARN_ON(), but used bitwise AND (&) instead of logical AND (&&), so the condition is never true. Replace with logical AND. Found by Coverity (CID 142811). Fixes: 3448a19d "vgaarb: use bridges to control VGA routing where possible" Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Yinghai Lu <yinghai@kernel.org> Acked-by:
David Airlie <airlied@redhat.com> Signed-off-by:
-
Thomas Jarosch authored
commit 7c82126a upstream. After a CPU upgrade while keeping the same mainboard, we faced "spurious interrupt" problems again. It turned out that the new CPU also featured a new GPU with a different PCI ID. Add this PCI ID to the quirk table. Probably all other Intel GPU PCI IDs are affected, too, but I don't want to add them without a test system. See f67fd55f ("PCI: Add quirk for still enabled interrupts on Intel Sandy Bridge GPUs") for some history. [bhelgaas: add f67fd55f reference, stable tag] Signed-off-by:
Thomas Jarosch <thomas.jarosch@intra2net.com> Signed-off-by:
-
Hans de Goede authored
commit fb4f8f56 upstream. The touchpad on the GIGABYTE U2442 not only stops communicating when we try to set bit 3 (enable real hardware resolution) of reg_10, but on some BIOS versions also when we set bit 1 (enable two finger mode auto correct). I've asked the original reporter of: https://bugzilla.kernel.org/show_bug.cgi?id=61151 To check that not setting bit 1 does not lead to any adverse effects on his model / BIOS revision, and it does not, so this commit fixes the touchpad not working on these versions by simply never setting bit 1 for laptop models with the no_hw_res quirk. Reported-and-tested-by:
James Lademann <jwlademann@gmail.com> Tested-by:
Philipp Wolfer <ph.wolfer@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Hans de Goede authored
commit cd9e83e2 upstream. At least the Dell Vostro 5470 elantech *clickpad* reports right button clicks when clicked in the right bottom area: https://bugzilla.redhat.com/show_bug.cgi?id=1103528 This is different from how (elantech) clickpads normally operate, normally no matter where the user clicks on the pad the pad always reports a left button event, since there is only 1 hardware button beneath the path. It looks like Dell has put 2 buttons under the pad, one under each bottom corner, causing this. Since this however still clearly is a real clickpad hardware-wise, we still want to report it as such to userspace, so that things like finger movement in the bottom area can be properly ignored as it should be on clickpads. So deal with this weirdness by simply mapping a right click to a left click on elantech clickpads. As an added advantage this is something which we can simply do on all elantech clickpads, so no need to add special quirks for this weird model. Reported-and-tested-by:
Elder Marco <eldermarco@gmail.com> Signed-off-by:
-
Nicholas Bellinger authored
commit 68349756 upstream. This patch adds a explicit memset to the login response PDU exception path in iscsit_tx_login_rsp(). This addresses a regression bug introduced in commit baa4d64b where the initiator would end up not receiving the login response and associated status class + detail, before closing the login connection. Reported-by:
Christophe Vu-Brugier <cvubrugier@yahoo.fr> Tested-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Nicholas Bellinger authored
commit 97c99b47 upstream. This patch changes iscsit_check_dataout_hdr() to dump the incoming Data-Out payload when the received ITT is not associated with a WRITE, instead of calling iscsit_reject_cmd() for the non WRITE ITT descriptor. This addresses a bug where an initiator sending an Data-Out for an ITT associated with a READ would end up generating a reject for the READ, eventually resulting in list corruption. Reported-by:
Santosh Kulkarni <santosh.kulkarni@calsoftinc.com> Reported-by:
Arshad Hussain <arshad.hussain@calsoftinc.com> Signed-off-by:
-
Nicholas Bellinger authored
commit 83ff42fc upstream. This patch fixes a left-over se_lun->lun_sep pointer OOPs when one of the /sys/kernel/config/target/$FABRIC/$WWPN/$TPGT/lun/$LUN/alua* attributes is accessed after the $DEVICE symlink has been removed. To address this bug, go ahead and clear se_lun->lun_sep memory in core_dev_unexport(), so that the existing checks for show/store ALUA attributes in target_core_fabric_configfs.c work as expected. Reported-by:
Sebastian Herbszt <herbszt@gmx.de> Tested-by:
-
- 01 Jul, 2014 13 commits
-
-
Greg Kroah-Hartman authored
-
Roland Dreier authored
Commit d5c55fa3, the backport of upstream 79d59d08 ("iscsi-target: Fix wrong buffer / buffer overrun in iscsi_change_param_value()") left out applying one chunk of the fix in iscsi_login_non_zero_tsih_s2(). Add the missing chunk. Signed-off-by:
-
Andy Lutomirski authored
commit 554086d8 upstream. The bad syscall nr paths are their own incomprehensible route through the entry control flow. Rearrange them to work just like syscalls that return -ENOSYS. This fixes an OOPS in the audit code when fast-path auditing is enabled and sysenter gets a bad syscall nr (CVE-2014-4508). This has probably been broken since Linux 2.6.27: af0575bb i386 syscall audit fast-path Cc: Roland McGrath <roland@redhat.com> Reported-by:
Toralf Förster <toralf.foerster@gmx.de> Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/e09c499eade6fc321266dd6b54da7beb28d6991c.1403558229.git.luto@amacapital.netSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Sagi Grimberg authored
commit f5ebec96 upstream. disconnected_handler works are scheduled on system_wq. When attempting to unload, first make sure all works have cleaned up. Signed-off-by:
-
Sagi Grimberg authored
commit 88c4015f upstream. There are 4 RDMA_CM events that all basically mean that the user should teardown the IB connection: - DISCONNECTED - ADDR_CHANGE - DEVICE_REMOVAL - TIMEWAIT_EXIT Only in DISCONNECTED/ADDR_CHANGE it makes sense to call rdma_disconnect (send DREQ/DREP to our initiator). So we keep the same teardown handler for all of them but only indicate calling rdma_disconnect for the relevant events. This patch also removes redundant debug prints for each single event. v2 changes: - Call isert_disconnected_handler() for DEVICE_REMOVAL (Or + Sag) Signed-off-by:
-
Roger Quadros authored
commit e5e47465 upstream. Without a timetout some tests e.g. test_halt() can remain stuck forever. Signed-off-by:
Roger Quadros <rogerq@ti.com> Reviewed-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Eric Sandeen authored
commit 3e2426bd upstream. If this condition in end_extent_writepage() is false: if (tree->ops && tree->ops->writepage_end_io_hook) we will then test an uninitialized "ret" at: ret = ret < 0 ? ret : -EIO; The test for ret is for the case where ->writepage_end_io_hook failed, and we'd choose that ret as the error; but if there is no ->writepage_end_io_hook, nothing sets ret. Initializing ret to 0 should be sufficient; if writepage_end_io_hook wasn't set, (!uptodate) means non-zero err was passed in, so we choose -EIO in that case. Signed-of-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Liu Bo authored
commit 6eda71d0 upstream. The skinny extents are intepreted incorrectly in scrub_print_warning(), and end up hitting the BUG() in btrfs_extent_inline_ref_size. Reported-by:
Konstantinos Skarlatos <k.skarlatos@gmail.com> Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Liu Bo authored
commit cd857dd6 upstream. We want to make sure the point is still within the extent item, not to verify the memory it's pointing to. Signed-off-by:
-
Rickard Strandqvist authored
commit 8321cf25 upstream. There is otherwise a risk of a possible null pointer dereference. Was largely found by using a static code analysis program called cppcheck. Signed-off-by:
-
Filipe Manana authored
commit 1af56070 upstream. If we are doing an incremental send and the base snapshot has a directory with name X that doesn't exist anymore in the second snapshot and a new subvolume/snapshot exists in the second snapshot that has the same name as the directory (name X), the incremental send would fail with -ENOENT error. This is because it attempts to lookup for an inode with a number matching the objectid of a root, which doesn't exist. Steps to reproduce: mkfs.btrfs -f /dev/sdd mount /dev/sdd /mnt mkdir /mnt/testdir btrfs subvolume snapshot -r /mnt /mnt/mysnap1 rmdir /mnt/testdir btrfs subvolume create /mnt/testdir btrfs subvolume snapshot -r /mnt /mnt/mysnap2 btrfs send -p /mnt/mysnap1 /mnt/mysnap2 -f /tmp/send.data A test case for xfstests follows. Reported-by:
Robert White <rwhite@pobox.com> Signed-off-by:
Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by:
-
Wang Shilong authored
commit 29865841 upstream. Seeding device support allows us to create a new filesystem based on existed filesystem. However newly created filesystem's @total_devices should include seed devices. This patch fix the following problem: # mkfs.btrfs -f /dev/sdb # btrfstune -S 1 /dev/sdb # mount /dev/sdb /mnt # btrfs device add -f /dev/sdc /mnt --->fs_devices->total_devices = 1 # umount /mnt # mount /dev/sdc /mnt --->fs_devices->total_devices = 2 This is because we record right @total_devices in superblock, but @fs_devices->total_devices is reset to be 0 in btrfs_prepare_sprout(). Fix this problem by not resetting @fs_devices->total_devices. Signed-off-by:
Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by:
-
Liu Bo authored
commit 5dca6eea upstream. According to commit 865ffef3 (fs: fix fsync() error reporting), it's not stable to just check error pages because pages can be truncated or invalidated, we should also mark mapping with error flag so that a later fsync can catch the error. Signed-off-by:
-
