- 14 Dec, 2021 21 commits
-
-
Yann Dirson authored
Those are not today pulled by the sphinx doc, but better be ready. Signed-off-by:
Yann Dirson <ydirson@free.fr> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Yann Dirson authored
This is Alex' description from the "Looking for clarifications around gfx/kcq/kiq" thread, edited to fit as ReST. Original text: https://www.spinics.net/lists/amd-gfx/msg71383.htmlOriginally-by:
Harry Wentland <harry.wentland@amd.com> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Yann Dirson authored
This describes in broad lines the how an AMD GPU is organized, in terms of hardware blocks. This is Alex' description from the "gpu block diagram" thread, edited to fit as ReST. Original text: https://www.spinics.net/lists/amd-gfx/msg71543.htmlOriginally-by:
-
Lang Yu authored
Memory is allocated for gpu_metrics_table in renoir_init_smc_tables(), but not freed in int smu_v12_0_fini_smc_tables(). Free it! Fixes: 95868b85 ("drm/amd/powerplay: add Renoir support for gpu metrics export") Signed-off-by:
Lang Yu <lang.yu@amd.com> Reviewed-by:
Lijo Lazar <lijo.lazar@amd.com> Signed-off-by:
-
Jingwen Chen authored
[Why] gmc bo will be pinned during loading amdgpu and reset in SRIOV while only unpinned in unload amdgpu [How] add amdgpu_in_reset and sriov judgement to skip pin bo v2: fix wrong judgement Signed-off-by:
Jingwen Chen <Jingwen.Chen2@amd.com> Reviewed-by:
Horace Chen <horace.chen@amd.com> Signed-off-by:
-
Jingwen Chen authored
[Why] psp tmr bo will be pinned during loading amdgpu and reset in SRIOV while only unpinned in unload amdgpu [How] add amdgpu_in_reset and sriov judgement to skip pin bo v2: fix wrong judgement Signed-off-by:
-
Lijo Lazar authored
Power states are not valid for arcturus and aldebaran, no need to allocate memory. Signed-off-by:
Yang Wang <kevinyang.wang@amd.com> Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
Evan Quan authored
Pair the operations did in GMC ->hw_init and ->hw_fini. That can help to maintain correct cached state for GMC and avoid unintention gate operation dropping due to wrong cached state. BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1828Signed-off-by:
Guchun Chen <guchun.chen@amd.com> Reviewed-by:
Mario Limonciello <mario.limonciello@amd.com> Signed-off-by:
-
Guchun Chen authored
Updated for consistency when accessing drm_device from amdgpu driver. Signed-off-by:
-
Evan Quan authored
As the smu_context will be invisible from outside(of power). Also, the smu_debug_mask can be shared around all power code instead of some specific framework(swSMU) only. Signed-off-by:
-
Victor Skvortsov authored
Host initiated VF FLR may fail if someone else is already holding a read_lock. Change from down_write_trylock to down_write to guarantee the reset goes through. Signed-off-by:
Victor Skvortsov <victor.skvortsov@amd.com> Reviewed by: Shaoyun.liu <Shaoyun.liu@amd.com> Signed-off-by:
-
Aric Cyr authored
Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Acked-by:
Pavle Kotarac <Pavle.Kotarac@amd.com> Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Signed-off-by:
-
Martin Leung authored
why: Need interface to lower clocks when in dc (power save) mode. Must be able to work with p_state unsupported cases Can cause flicker when OS notifies us of dc state change how: added dal3 interface for KMD added pathway to query smu for this softmax added blank before clock change to override underflow added logic to change clk based on pstatesupport and softmax added logic in prepare/optimize_bw to conform while changing clocks Reviewed-by:
Martin Leung <Martin.Leung@amd.com> Signed-off-by:
-
Eric Bernstein authored
[Why] For ODM + MPO window on one half of ODM, only 3 pipes should be allocated and scaling parameters adjusted to handle this case [How] Fix pipe allocation when MPO viewport is only on one side of ODM split, and modify scaling paramters. Added diags test cases for ODM + windows MPO, where MPO window is on right half, left half, and both halves or ODM. Reviewed-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by:
Eric Bernstein <eric.bernstein@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] If the firmware wasn't reset by PSP or HW and is currently running then the firmware will hang or perform underfined behavior when we modify its firmware state underneath it. [How] Reset DMCUB before setting up cache windows and performing HW init. Reviewed-by:
Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com> Acked-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
-
Anthony Koo authored
Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Signed-off-by:
-
Michael Strauss authored
[WHY] This workaround resolves underflow caused by incorrect DST_Y_PREFETCH. Overriding to 192KB DET buf size until the DST_Y_PREFETCH calc is fixed. Reviewed-by:
Eric Yang <Eric.Yang2@amd.com> Acked-by:
Michael Strauss <michael.strauss@amd.com> Signed-off-by:
-
Mikita Lipski authored
[why] Adding a function to read PSR capabilities and ALPM capabilities. Also adding a helper function to validate if the sink and the driver support PSR SU. [how] - isolated all PSR and ALPM reading calls to a separate funciton - set all required PSR caps - added a helper function to check if PSR SU is supported by sink and the driver Reviewed-by:
Roman Li <Roman.Li@amd.com> Reviewed-by:
Mikita Lipski <mikita.lipski@amd.com> Signed-off-by:
-
Solomon Chiu authored
[Why] Current error log of dummy irq service doesn't have src/ext ID info in the log. [How] Add src/ext ID in ack/set of dummy irq service. Reviewed-by:
Wayne Lin <Wayne.Lin@amd.com> Acked-by:
Solomon Chiu <solomon.chiu@amd.com> Signed-off-by:
-
Wayne Lin authored
[Why & How] In order to know the intermediate link rates supported by the eDP panel and test to select the optimized link rate to save power, create a new debugfs entry "ilr_setting" for setting ILR. Reviewed-by:
-
Nicholas Kazlauskas authored
[Why] SMU now respects the PHY refclk disable request from driver. This causes a hang during hotplug when PHY refclk was disabled because it's not being re-enabled and the transmitter control starts on dc_link_detect. [How] We normally would re-enable the clk with exit_optimized_pwr_state but this is only set on DCN21 and DCN301. Set it for dcn31 as well. This fixes DMCUB timeouts in the PHY. Fixes: 64b1d0e8 ("drm/amd/display: Add DCN3.1 HWSEQ") Reviewed-by:
-
- 13 Dec, 2021 19 commits
-
-
chiminghao authored
return value form directly instead of taking this in another redundant variable. Reported-by:
Zeal Robot <zealci@zte.com.cm> Signed-off-by:
chiminghao <chi.minghao@zte.com.cn> Signed-off-by:
-
Yann Dirson authored
This starts to make the formated index much more manageable to the reader. Reviewed-by:
-
Mario Limonciello authored
Update smu_v13 to match smu_v12 and smu_v11 behavior where this is fetched from debugfs rather than in kernel logs on every boot. Signed-off-by:
-
Mario Limonciello authored
This value does not get cached into adev->pm.fw_version during startup for smu13 like it does for other SMU like smu12. Signed-off-by:
-
Isabella Basso authored
This turns previously global functions into static, thus removing compile-time warnings such as: warning: no previous prototype for 'get_highest_allowed_voltage_level' [-Wmissing-prototypes] 742 | unsigned int get_highest_allowed_voltage_level(uint32_t chip_family, uint32_t hw_internal_rev, uint32_t pci_revision_id) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ warning: no previous prototype for 'rv1_vbios_smu_send_msg_with_param' [-Wmissing-prototypes] 102 | int rv1_vbios_smu_send_msg_with_param(struct clk_mgr_internal *clk_mgr, unsigned int msg_id, unsigned int param) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Changes since v1: - As suggested by Rodrigo Siqueira: 1. Rewrite function signatures to make them more readable. 2. Get rid of unused functions in order to remove 'defined but not used' warnings. Reviewed-by:Isabella Basso <isabbasso@riseup.net> Signed-off-by:
-
Michel Dänzer authored
Use the struct display_mode_lib pointer instead of passing lots of large arrays as parameters by value. Addresses this warning (resulting in failure to build a RHEL debug kernel with Werror enabled): ../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c: In function ‘UseMinimumDCFCLK’: ../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:7478:1: warning: the frame size of 2128 bytes is larger than 2048 bytes [-Wframe-larger-than=] NOTE: AFAICT this function previously had no observable effect, since it only modified parameters passed by value and doesn't return anything. Now it may modify some values in struct display_mode_lib passed in by reference. Reviewed-by:
Michel Dänzer <mdaenzer@redhat.com> Signed-off-by:
-
Michel Dänzer authored
Move code using the Pipe struct to a new helper function. Works around[0] this warning (resulting in failure to build a RHEL debug kernel with Werror enabled): ../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c: In function ‘dml31_ModeSupportAndSystemConfigurationFull’: ../drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:5740:1: warning: the frame size of 2144 bytes is larger than 2048 bytes [-Wframe-larger-than=] The culprit seems to be the Pipe struct, so pull the relevant block out into its own sub-function. (This is porting commit a62427ef ("drm/amd/display: Reduce stack size for dml21_ModeSupportAndSystemConfigurationFull") from dml31 to dml21) [0] AFAICT this doesn't actually reduce the total amount of stack which can be used, just moves some of it from dml31_ModeSupportAndSystemConfigurationFull to the new helper function, so the former happens to no longer exceed the limit for a single function. Reviewed-by:
-
Isabella Basso authored
Fix the warning below: warning: Cannot understand * \file amdgpu_ioc32.c on line 2 - I thought it was a doc line Changes since v1: - As suggested by Alexander Deucher: 1. Reduce diff to minimum as this DOC section doesn't provide much value. Signed-off-by: -
Isabella Basso authored
This fixes the warnings below, and also drops the display_count variable, as it's unused. In function 'svm_range_map_to_gpu': warning: variable 'bo_va' set but not used [-Wunused-but-set-variable] 1172 | struct amdgpu_bo_va bo_va; | ^~~~~ ... In function 'dcn201_update_clocks': warning: variable 'enter_display_off' set but not used [-Wunused-but-set-variable] 132 | bool enter_display_off = false; | ^~~~~~~~~~~~~~~~~ Changes since v1: - As suggested by Rodrigo Siqueira: 1. Drop display_count variable. - As suggested by Felix Kuehling: 1. Remove block surrounding amdgpu_xgmi_same_hive. Reviewed-by:Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Isabella Basso authored
This commit fixes the compile-time warning below: warning: no previous prototype for ‘amdgpu_ras_mca_query_error_status’ [-Wmissing-prototypes] Changes since v1: - As suggested by Alexander Deucher: 1. Make function static instead of adding prototype. Signed-off-by:
-
Mario Limonciello authored
`edp_stream` is only used when backend is enabled on eDP, don't declare the variable outside that scope. Signed-off-by:
-
Mario Limonciello authored
There are a few places that this isn't checked that could potentially be a NULL pointer access. Signed-off-by:
-
Philip Yang authored
For userptr bo, if adev is not in IOMMU isolation mode, RAM direct map to GPU, multiple GPUs use same system memory dma mapping address, they can share the original mem->bo in attachment to reduce dma address array memory usage. Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
-
Philip Yang authored
If host and amdgpu IOMMU is not enabled or IOMMU is pass through mode, set adev->ram_is_direct_mapped flag which will be used to optimize memory usage for multi GPU mappings. Signed-off-by:
-
Rodrigo Siqueira authored
In the DC driver, we have multiple acronyms that are not obvious most of the time; the same idea is valid for amdgpu. This commit introduces a DC and amdgpu glossary in order to make it easier to navigate through our driver. Changes since V3: - Yann: Add new acronyms to amdgpu glossary - Daniel: Add link between dc and amdgpu glossary Changes since V2: - Add MMHUB Changes since V1: - Yann: Divide glossary based on driver context. - Alex: Make terms more consistent and update CPLIB - Add new acronyms to the glossary Reviewed-by:
-
Rodrigo Siqueira authored
This commit describes how DCN works by providing high-level diagrams with an explanation of each component. In particular, it details the Global Sync signals. Change since V2: - Add a comment about MMHUBBUB. Reviewed-by:
-
Rodrigo Siqueira authored
Introduce how to collect DTN log from debugfs. Reviewed-by:
-
Rodrigo Siqueira authored
Display core provides a feature that makes it easy for users to debug Pipe Split. This commit introduces how to use such a debug option. Reviewed-by:
-
Rodrigo Siqueira authored
Display core provides a feature that makes it easy for users to debug Multiple planes by enabling a visual notification at the bottom of each plane. This commit introduces how to use such a feature. Reviewed-by:
-
