- 18 Aug, 2022 3 commits
-
-
Fabio M. De Francesco authored
Pages allocated with GFP_ATOMIC cannot come from Highmem. This is why there is no need to call kmap() on them. Therefore, don't call kmap() on rx_buffer->page() and instead use a plain page_address() to get the kernel address. Suggested-by: Ira Weiny <ira.weiny@intel.com> Suggested-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Wong Vee Khee authored
The 'has_crossts' flag was not used anywhere in the stmmac driver, removing it from both header file and dwmac-intel driver. Signed-off-by: Wong Vee Khee <veekhee@apple.com> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Link: https://lore.kernel.org/r/20220817064324.10025-1-veekhee@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Andrii Nakryiko says: ==================== bpf-next 2022-08-17 We've added 45 non-merge commits during the last 14 day(s) which contain a total of 61 files changed, 986 insertions(+), 372 deletions(-). The main changes are: 1) New bpf_ktime_get_tai_ns() BPF helper to access CLOCK_TAI, from Kurt Kanzenbach and Jesper Dangaard Brouer. 2) Few clean ups and improvements for libbpf 1.0, from Andrii Nakryiko. 3) Expose crash_kexec() as kfunc for BPF programs, from Artem Savkov. 4) Add ability to define sleepable-only kfuncs, from Benjamin Tissoires. 5) Teach libbpf's bpf_prog_load() and bpf_map_create() to gracefully handle unsupported names on old kernels, from Hangbin Liu. 6) Allow opting out from auto-attaching BPF programs by libbpf's BPF skeleton, from Hao Luo. 7) Relax libbpf's requirement for shared libs to be marked executable, from Henqgi Chen. 8) Improve bpf_iter internals handling of error returns, from Hao Luo. 9) Few accommodations in libbpf to support GCC-BPF quirks, from James Hilliard. 10) Fix BPF verifier logic around tracking dynptr ref_obj_id, from Joanne Koong. 11) bpftool improvements to handle full BPF program names better, from Manu Bretelle. 12) bpftool fixes around libcap use, from Quentin Monnet. 13) BPF map internals clean ups and improvements around memory allocations, from Yafang Shao. 14) Allow to use cgroup_get_from_file() on cgroupv1, allowing BPF cgroup iterator to work on cgroupv1, from Yosry Ahmed. 15) BPF verifier internal clean ups, from Dave Marchevsky and Joanne Koong. 16) Various fixes and clean ups for selftests/bpf and vmtest.sh, from Daniel Xu, Artem Savkov, Joanne Koong, Andrii Nakryiko, Shibin Koikkara Reeny. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits) selftests/bpf: Few fixes for selftests/bpf built in release mode libbpf: Clean up deprecated and legacy aliases libbpf: Streamline bpf_attr and perf_event_attr initialization libbpf: Fix potential NULL dereference when parsing ELF selftests/bpf: Tests libbpf autoattach APIs libbpf: Allows disabling auto attach selftests/bpf: Fix attach point for non-x86 arches in test_progs/lsm libbpf: Making bpf_prog_load() ignore name if kernel doesn't support selftests/bpf: Update CI kconfig selftests/bpf: Add connmark read test selftests/bpf: Add existing connection bpf_*_ct_lookup() test bpftool: Clear errno after libcap's checks bpf: Clear up confusion in bpf_skb_adjust_room()'s documentation bpftool: Fix a typo in a comment libbpf: Add names for auxiliary maps bpf: Use bpf_map_area_alloc consistently on bpf map creation bpf: Make __GFP_NOWARN consistent in bpf map creation bpf: Use bpf_map_area_free instread of kvfree bpf: Remove unneeded memset in queue_stack_map creation libbpf: preserve errno across pr_warn/pr_info/pr_debug ... ==================== Link: https://lore.kernel.org/r/20220817215656.1180215-1-andrii@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 17 Aug, 2022 23 commits
-
-
Andrii Nakryiko authored
Fix few issues found when building and running test_progs in release mode. First, potentially uninitialized idx variable in xskxceiver, force-initialize to zero to satisfy compiler. Few instances of defining uprobe trigger functions break in release mode unless marked as noinline, due to being static. Add noinline to make sure everything works. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Hao Luo <haoluo@google.com> Link: https://lore.kernel.org/bpf/20220816001929.369487-5-andrii@kernel.org
-
Andrii Nakryiko authored
Remove three missed deprecated APIs that were aliased to new APIs: bpf_object__unload, bpf_prog_attach_xattr and btf__load. Also move legacy API libbpf_find_kernel_btf (aliased to btf__load_vmlinux_btf) into libbpf_legacy.h. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Hao Luo <haoluo@google.com> Link: https://lore.kernel.org/bpf/20220816001929.369487-4-andrii@kernel.org
-
Andrii Nakryiko authored
Make sure that entire libbpf code base is initializing bpf_attr and perf_event_attr with memset(0). Also for bpf_attr make sure we clear and pass to kernel only relevant parts of bpf_attr. bpf_attr is a huge union of independent sub-command attributes, so there is no need to clear and pass entire union bpf_attr, which over time grows quite a lot and for most commands this growth is completely irrelevant. Few cases where we were relying on compiler initialization of BPF UAPI structs (like bpf_prog_info, bpf_map_info, etc) with `= {};` were switched to memset(0) pattern for future-proofing. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Hao Luo <haoluo@google.com> Link: https://lore.kernel.org/bpf/20220816001929.369487-3-andrii@kernel.org
-
Andrii Nakryiko authored
Fix if condition filtering empty ELF sections to prevent NULL dereference. Fixes: 47ea7417 ("libbpf: Skip empty sections in bpf_object__init_global_data_maps") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Hao Luo <haoluo@google.com> Link: https://lore.kernel.org/bpf/20220816001929.369487-2-andrii@kernel.org
-
Jakub Kicinski authored
Florian Fainelli says: ==================== net: dsa: bcm_sf2: Utilize PHYLINK for all ports This patch series has the bcm_sf2 driver utilize PHYLINK to configure the CPU port link parameters to unify the configuration and pave the way for DSA to utilize PHYLINK for all ports in the future. Tested on BCM7445 and BCM7278 ==================== Link: https://lore.kernel.org/r/20220815175009.2681932-1-f.fainelli@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Florian Fainelli authored
Remove the artificial limitations imposed upon bcm_sf2_sw_mac_link_{up,down} and allow us to override the link parameters for IMP port(s) as well as regular ports by accounting for the special differences that exist there. Remove the code that did override the link parameters in bcm_sf2_imp_setup(). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Florian Fainelli authored
Depending upon the generation of switches, we have different offsets for configuring a given port's status override where link parameters are applied. Introduce a helper function that we re-use throughout the code in order to let phylink callbacks configure the IMP/CPU port(s) in subsequent changes. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Beniamin Sandu authored
This makes the code look cleaner and easier to read. Signed-off-by: Beniamin Sandu <beniaminsandu@gmail.com> Link: https://lore.kernel.org/r/20220813204658.848372-1-beniaminsandu@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Hao Luo authored
Adds test for libbpf APIs that toggle bpf program auto-attaching. Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220816234012.910255-2-haoluo@google.com
-
Hao Luo authored
Adds libbpf APIs for disabling auto-attach for individual functions. This is motivated by the use case of cgroup iter [1]. Some iter types require their parameters to be non-zero, therefore applying auto-attach on them will fail. With these two new APIs, users who want to use auto-attach and these types of iters can disable auto-attach on the program and perform manual attach. [1] https://lore.kernel.org/bpf/CAEf4BzZ+a2uDo_t6kGBziqdz--m2gh2_EUwkGLDtMd65uwxUjA@mail.gmail.com/Signed-off-by: Hao Luo <haoluo@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220816234012.910255-1-haoluo@google.com
-
David S. Miller authored
M Chetan Kumar says: ==================== net: wwan: t7xx: fw flashing & coredump support This patch series brings-in the support for FM350 wwan device firmware flashing & coredump collection using devlink interface. Below is the high level description of individual patches. Refer to individual patch commit message for details. PATCH1: Enables AP CLDMA communication for firmware flashing & coredump collection. PATCH2: Enables the infrastructure & queue configuration required for early ports enumeration. PATCH3: Implements device reset and rescan logic required to enter or exit fastboot mode. PATCH4: Implements devlink interface & uses the fastboot protocol for fw flashing and coredump collection. PATCH5: t7xx devlink commands documentation. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
M Chetan Kumar authored
Document the t7xx devlink commands usage for fw flashing & coredump collection. Refer to t7xx.rst file for details. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
M Chetan Kumar authored
This patch brings-in support for t7xx wwan device firmware flashing & coredump collection using devlink. Driver Registers with Devlink framework. Implements devlink ops flash_update callback that programs modem firmware. Creates region & snapshot required for device coredump log collection. On early detection of wwan device in fastboot mode driver sets up CLDMA0 HW tx/rx queues for raw data transfer then registers with devlink framework. Upon receiving firmware image & partition details driver sends fastboot commands for flashing the firmware. In this flow the fastboot command & response gets exchanged between driver and device. Once firmware flashing is success completion status is reported to user space application. Below is the devlink command usage for firmware flashing $devlink dev flash pci/$BDF file ABC.img component ABC Note: ABC.img is the firmware to be programmed to "ABC" partition. In case of coredump collection when wwan device encounters an exception it reboots & stays in fastboot mode for coredump collection by host driver. On detecting exception state driver collects the core dump, creates the devlink region & reports an event to user space application for dump collection. The user space application invokes devlink region read command for dump collection. Below are the devlink commands used for coredump collection. devlink region new pci/$BDF/mr_dump devlink region read pci/$BDF/mr_dump snapshot $ID address $ADD length $LEN devlink region del pci/$BDF/mr_dump snapshot $ID Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com> Signed-off-by: Mishra Soumya Prakash <soumya.prakash.mishra@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Haijun Liu authored
PCI rescan module implements "rescan work queue". In firmware flashing or coredump collection procedure WWAN device is programmed to boot in fastboot mode and a work item is scheduled for removal & detection. The WWAN device is reset using APCI call as part driver removal flow. Work queue rescans pci bus at fixed interval for device detection, later when device is detect work queue exits. Signed-off-by: Haijun Liu <haijun.liu@mediatek.com> Co-developed-by: Madhusmita Sahu <madhusmita.sahu@intel.com> Signed-off-by: Madhusmita Sahu <madhusmita.sahu@intel.com> Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Haijun Liu authored
To support cases such as FW update or Core dump, the t7xx device is capable of signaling the host that a special port needs to be created before the handshake phase. This patch adds the infrastructure required to create the early ports which also requires a different configuration of CLDMA queues. Signed-off-by: Haijun Liu <haijun.liu@mediatek.com> Co-developed-by: Madhusmita Sahu <madhusmita.sahu@intel.com> Signed-off-by: Madhusmita Sahu <madhusmita.sahu@intel.com> Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com> Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Haijun Liu authored
The t7xx device contains two Cross Layer DMA (CLDMA) interfaces to communicate with AP and Modem processors respectively. So far only MD-CLDMA was being used, this patch enables AP-CLDMA. Rename small Application Processor (sAP) to AP. Signed-off-by: Haijun Liu <haijun.liu@mediatek.com> Co-developed-by: Madhusmita Sahu <madhusmita.sahu@intel.com> Signed-off-by: Madhusmita Sahu <madhusmita.sahu@intel.com> Signed-off-by: Moises Veleta <moises.veleta@linux.intel.com> Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com> Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Florian Fainelli authored
Implement the suspend/resume procedure for the Broadcom AC131 and BCM5241 type of PHYs (10/100 only) by entering the standard power down followed by the proprietary standby mode in the auxiliary mode 4 shadow register. On resume, the PHY software reset is enough to make it come out of standby mode so we can utilize brcm_fet_config_init() as the resume hook. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/nexDavid S. Miller authored
t-queue Tony Nguyen says: ==================== ice: detect and report PTP timestamp issues Jacob Keller says: This series fixes a few small issues with the cached PTP Hardware Clock timestamp used for timestamp extension. It also introduces extra checks to help detect issues with this logic, such as if the cached timestamp is not updated within the 2 second window. This introduces a few statistics similar to the ones already available in other Intel drivers, including tx_hwtstamp_skipped and tx_hwtstamp_timeouts. It is intended to aid in debugging issues we're seeing with some setups which might be related to incorrect cached timestamp values. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jie Meng authored
Instead of the hardcoded TCP_TIMEOUT_INIT, this diff calls tcp_timeout_init to initiate req->timeout like the non TFO SYN ACK case. Tested using the following packetdrill script, on a host with a BPF program that sets the initial connect timeout to 10ms. `../../common/defaults.sh` // Initialize connection 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_TCP, TCP_FASTOPEN, [1], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 32792 <mss 1000,sackOK,FO TFO_COOKIE> +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK> +.01 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK> +.02 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK> +.04 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK> +.01 < . 1:1(0) ack 1 win 32792 +0 accept(3, ..., ...) = 4 Signed-off-by: Jie Meng <jmeng@fb.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Zhengchao Shao authored
The input parameter p is unused in qdisc_create. Delete it. Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20220815061023.51318-1-shaozhengchao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Stefan Wahren authored
in-tech smart charging is now chargebyte. So update the email address accordingly. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20220815080626.9688-2-stefan.wahren@i2se.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Stefan Wahren authored
in-tech smart charging is now chargebyte. So update the email address accordingly. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220815080626.9688-1-stefan.wahren@i2se.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Zhengchao Shao authored
Return value of unregister_qdisc is unused, remove it. Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20220815030417.271894-1-shaozhengchao@huawei.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 16 Aug, 2022 7 commits
-
-
Artem Savkov authored
Use SYS_PREFIX macro from bpf_misc.h instead of hard-coded '__x64_' prefix for sys_setdomainname attach point in lsm test. Signed-off-by: Artem Savkov <asavkov@redhat.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20220816055231.717006-1-asavkov@redhat.com
-
Jacob Keller authored
If the PTP hardware clock is adjusted, the ice driver must update the cached PHC timestamp. This is required in order to perform timestamp extension on the shorter timestamps captured by the PHY. Currently, we simply call ice_ptp_update_cached_phctime in the settime and adjtime callbacks. This has a few issues: 1) if ICE_CFG_BUSY is set because another thread is updating the Rx rings, we will exit with an error. This is not checked, and the functions do not re-schedule the update. This could leave the cached timestamp incorrect until the next scheduled work item execution. 2) even if we did handle an update, any currently outstanding Tx timestamp would be extended using the wrong cached PHC time. This would produce incorrect results. To fix these issues, introduce a new ice_ptp_reset_cached_phctime function. This function calls the ice_ptp_update_cached_phctime, and discards outstanding Tx timestamps. If the ice_ptp_update_cached_phctime function fails because ICE_CFG_BUSY is set, we log a warning and schedule the thread to execute soon. The update function is modified so that it always updates the cached copy in the PF regardless. This ensures we have the most up to date values possible and minimizes the risk of a packet timestamp being extended with the wrong value. It would be nice if we could skip reporting Rx timestamps until the cached values are up to date. However, we can't access the Rx rings while ICE_CFG_BUSY is set because they are actively being updated by another thread. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Jacob Keller authored
A following change is going to want to make use of ice_ptp_flush_tx_tracker earlier in the ice_ptp.c file. To make this work, move the Tx timestamp tracking functions higher up in the file, and pull the ice_ptp_update_cached_timestamp function below them. This should have no functional change. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Jacob Keller authored
The ice driver requires a cached copy of the PHC time in order to perform timestamp extension on Tx and Rx hardware timestamp values. This cached PHC time must always be updated at least once every 2 seconds. Otherwise, the math used to perform the extension would produce invalid results. The updates are supposed to occur periodically in the PTP kthread work item, which is scheduled to run every half second. Thus, we do not expect an update to be delayed for so long. However, there are error conditions which can cause the update to be delayed. Track this situation by using jiffies to determine approximately how long ago the last update occurred. Add a new statistic and a dev_warn when we have failed to update the cached PHC time. This makes the error case more obvious. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Jacob Keller authored
Several Intel networking drivers which support PTP track when Tx timestamps are skipped or when they timeout without a timestamp from hardware. The conditions which could cause these events are rare, but it can be useful to know when and how often they occur. Implement similar statistics for the ice driver, tx_hwtstamp_skipped, tx_hwtstamp_timeouts, and tx_hwtstamp_flushed. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Jacob Keller authored
When we create new Rx rings, the cached_phctime field is zero initialized. This could result in incorrect timestamp reporting due to the cached value not yet being updated. Although a background task will periodically update the cached value, ensure it matches the existing cached value in the PF structure at ring initialization. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
Jacob Keller authored
When the user changes the number of queues via ethtool, the driver allocates new rings. This allocation did not initialize tx_tstamps. This results in the tx_tstamps field being zero (due to kcalloc allocation), and would result in a NULL pointer dereference when attempting a transmit timestamp on the new ring. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-
- 15 Aug, 2022 7 commits
-
-
Hangbin Liu authored
Similar with commit 10b62d6a ("libbpf: Add names for auxiliary maps"), let's make bpf_prog_load() also ignore name if kernel doesn't support program name. To achieve this, we need to call sys_bpf_prog_load() directly in probe_kern_prog_name() to avoid circular dependency. sys_bpf_prog_load() also need to be exported in the libbpf_internal.h file. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20220813000936.6464-1-liuhangbin@gmail.com
-
Daniel Xu authored
The previous selftest changes require two kconfig changes in bpf-ci. Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/bpf/2c27c6ebf7a03954915f83560653752450389564.1660254747.git.dxu@dxuuu.xyz
-
Daniel Xu authored
Test that the prog can read from the connection mark. This test is nice because it ensures progs can interact with netfilter subsystem correctly. Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/bpf/d3bc620a491e4c626c20d80631063922cbe13e2b.1660254747.git.dxu@dxuuu.xyz
-
Daniel Xu authored
Add a test where we do a conntrack lookup on an existing connection. This is nice because it's a more realistic test than artifically creating a ct entry and looking it up afterwards. Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> Link: https://lore.kernel.org/bpf/de5a617832f38f8b5631cc87e2a836da7c94d497.1660254747.git.dxu@dxuuu.xyz
-
Quentin Monnet authored
When bpftool is linked against libcap, the library runs a "constructor" function to compute the number of capabilities of the running kernel [0], at the beginning of the execution of the program. As part of this, it performs multiple calls to prctl(). Some of these may fail, and set errno to a non-zero value: # strace -e prctl ./bpftool version prctl(PR_CAPBSET_READ, CAP_MAC_OVERRIDE) = 1 prctl(PR_CAPBSET_READ, 0x30 /* CAP_??? */) = -1 EINVAL (Invalid argument) prctl(PR_CAPBSET_READ, CAP_CHECKPOINT_RESTORE) = 1 prctl(PR_CAPBSET_READ, 0x2c /* CAP_??? */) = -1 EINVAL (Invalid argument) prctl(PR_CAPBSET_READ, 0x2a /* CAP_??? */) = -1 EINVAL (Invalid argument) prctl(PR_CAPBSET_READ, 0x29 /* CAP_??? */) = -1 EINVAL (Invalid argument) ** fprintf added at the top of main(): we have errno == 1 ./bpftool v7.0.0 using libbpf v1.0 features: libbfd, libbpf_strict, skeletons +++ exited with 0 +++ This has been addressed in libcap 2.63 [1], but until this version is available everywhere, we can fix it on bpftool side. Let's clean errno at the beginning of the main() function, to make sure that these checks do not interfere with the batch mode, where we error out if errno is set after a bpftool command. [0] https://git.kernel.org/pub/scm/libs/libcap/libcap.git/tree/libcap/cap_alloc.c?h=libcap-2.65#n20 [1] https://git.kernel.org/pub/scm/libs/libcap/libcap.git/commit/?id=f25a1b7e69f7b33e6afb58b3e38f3450b7d2d9a0Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220815162205.45043-1-quentin@isovalent.com
-
Quentin Monnet authored
Adding or removing room space _below_ layers 2 or 3, as the description mentions, is ambiguous. This was written with a mental image of the packet with layer 2 at the top, layer 3 under it, and so on. But it has led users to believe that it was on lower layers (before the beginning of the L2 and L3 headers respectively). Let's make it more explicit, and specify between which layers the room space is adjusted. Reported-by: Rumen Telbizov <rumen.telbizov@menlosecurity.com> Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220812153727.224500-3-quentin@isovalent.com
-
Quentin Monnet authored
This is the wrong library name: libcap, not libpcap. Signed-off-by: Quentin Monnet <quentin@isovalent.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220812153727.224500-1-quentin@isovalent.com
-