- 03 Jan, 2009 1 commit
-
-
Julia Lawall authored
This code had calls to both usb_set_intfdata and dev_set_drvdata, doing the same thing. The semantic patch that lead to finding this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @header@ @@ @same depends on header@ position p; @@ usb_set_intfdata@p(...) { ... } @depends on header@ position _p!=same.p; identifier _f; struct usb_interface *intf; expression data; @@ _f@_p(...) { <+... - dev_set_drvdata(&intf->dev, data); + usb_set_intfdata(intf, data); ...+> } // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
- 02 Jan, 2009 33 commits
-
-
Michael Krufky authored
A user reported the following OOPS with his pcHDTV HD5500 card, which uses a cx88 PCI bridge with a LG-TDVS-H06xF frontend module, made up of a TUA6034 tuner, TDA988x IF demod, and LG DT3303 ATSC/QAM demod. Somehow, tuner-core gets loaded before the digital driver configures the tuner, and tuner-core somehow incorrectly sets the tuner type to LG NTSC (TAPE series) instead of LG TDVS-H06xF. This tuner type does not have the tuning stepsize defined, so an OOPS occurs during the digital tune function. We still dont know how the type gets set incorrectly in the first place. The user has a tainted kernel with a binary nividia module, which COULD have something to do with this, but it's hard to say for sure. Nevertheless, to avoid this division by zero, we should check that stepsize is defined. If stepsize is not defined, print an error and bail out on the tune request. cx8800 0000:05:01.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 cx88[0]: subsystem: 7063:5500, board: pcHDTV HD5500 HDTV [card=47,autodetected], frontend(s): 1 cx88[0]: TV tuner type 47, Radio tuner type -1 tuner' 2-0043: chip found @ 0x86 (cx88[0]) tda9887 2-0043: creating new instance tda9887 2-0043: tda988[5/6/7] found tuner' 2-0061: chip found @ 0xc2 (cx88[0]) tuner-simple 2-0061: creating new instance tuner-simple 2-0061: type set to 47 (LG NTSC (TAPE series)) cx88[0]/0: found at 0000:05:01.0, rev: 5, irq: 19, latency: 32, mmio: 0xea000000 cx88[0]/0: registered device video1 [v4l2] cx88[0]/0: registered device vbi1 cx88_audio 0000:05:01.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 cx88[0]/1: CX88x/0: ALSA support for cx2388x boards cx88[0]/2: cx2388x 8802 Driver Manager cx88-mpeg driver manager 0000:05:01.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 cx88[0]/2: found at 0000:05:01.2, rev: 5, irq: 19, latency: 32, mmio: 0xec000000 cx8802_probe() allocating 1 frontend(s) cx88/2: cx2388x dvb driver version 0.0.6 loaded cx88/2: registering cx8802 driver, type: dvb access: shared cx88[0]/2: subsystem: 7063:5500, board: pcHDTV HD5500 HDTV [card=47] cx88[0]/2: cx2388x based DVB/ATSC card tuner-simple 2-0061: attaching existing instance tuner-simple 2-0061: type set to 64 (LG NTSC (TAPE series)) tda9887 2-0043: attaching existing instance DVB: registering new adapter (cx88[0]) DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)... [snip] stepsize=0 divide error: 0000 [1] SMP CPU 1 Modules linked in: nls_utf8 fuse sco bridge stp bnep l2cap bluetooth sunrpc nf_conntrack_netbios_ns nf_conntrack_ftp ip6t_REJECT nf_conntrack_ipv6 ip6table_filter ip6_tables ipv6 cpufreq_ondemand acpi_cpufreq freq_table xfs lgdt330x dm_multipath cx88_dvb cx88_vp3054_i2c uinput tda9887 tda8290 snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_emul tuner_simple tuner_types tuner msp3400 cx8800 cx88_alsa cx8802 snd_emu10k1 cx88xx snd_rawmidi snd_ac97_codec ir_common ac97_bus saa7115 snd_seq_dummy snd_seq_oss snd_seq_midi_event videobuf_dvb snd_seq dvb_core snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_device videobuf_dma_sg ppdev parport_pc snd_timer videobuf_core snd_page_alloc btcx_risc emu10k1_gp ivtv i2c_algo_bit cx2341x snd_util_mem snd_hwdep nvidia(P) gameport v4l2_common i2c_i801 snd soundcore parport videodev v4l1_compat v4l2_compat_ioctl32 tveeprom i2c_core pcspkr iTCO_wdt iTCO_vendor_support sky2 joydev floppy shpchp ata_generic pata_acpi pata_jmicron [last unloaded: microcode] Pid: 3553, comm: kdvb-ad-0-fe-0 Tainted: P 2.6.27.9-159.fc10.x86_64 #1 RIP: 0010:[<ffffffffa09bc37a>] [<ffffffffa09bc37a>] simple_dvb_calc_regs+0xab/0x281 [tuner_simple] RSP: 0018:ffff8800605dfd30 EFLAGS: 00010246 RAX: 000000000365c040 RBX: ffff8800605dfdb0 RCX: ffff88007acb8c10 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000246 RBP: ffff8800605dfda0 R08: ffff8800605dfba0 R09: 0000000000000082 R10: 00000010e73c9df1 R11: 0000000100000000 R12: ffff88007ac29c00 R13: ffff88007ac29c00 R14: ffff88007acbb408 R15: ffffffffa09b6fb0 FS: 0000000000000000(0000) GS:ffff88007f804880(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00000000004e8f40 CR3: 000000007114e000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kdvb-ad-0-fe-0 (pid: 3553, threadinfo ffff8800605de000, task ffff88006fca0000) Stack: ffff8800605dfd40 00000000ffffffa1 ffff88007c055860 0000000000000001 ffff8800605dfda0 ffff8800605dfda0 ffff88007acb8c10 ffffffffa004e48c 8e01880000000390 ffff88007acb8c10 ffff88007ac29c00 0000000000000000 Call Trace: [<ffffffffa004e48c>] ? i2c_transfer+0x80/0x8b [i2c_core] [<ffffffffa09bc768>] simple_dvb_set_params+0x3e/0x9b [tuner_simple] [<ffffffffa0a0335a>] lgdt330x_set_parameters+0x188/0x1b9 [lgdt330x] [<ffffffffa08c9116>] dvb_frontend_swzigzag_autotune+0x18e/0x1b5 [dvb_core] [<ffffffffa08c9f6a>] dvb_frontend_swzigzag+0x1bc/0x21e [dvb_core] [<ffffffffa08ca4f4>] dvb_frontend_thread+0x528/0x62b [dvb_core] [<ffffffff810551e1>] ? autoremove_wake_function+0x0/0x38 [<ffffffffa08c9fcc>] ? dvb_frontend_thread+0x0/0x62b [dvb_core] [<ffffffff81054e9b>] kthread+0x49/0x76 [<ffffffff810116e9>] child_rip+0xa/0x11 [<ffffffff81010a07>] ? restore_args+0x0/0x30 [<ffffffff81054e52>] ? kthread+0x0/0x76 [<ffffffff810116df>] ? child_rip+0x0/0x11 Code: 48 8b 05 2a 4e 00 00 41 8b 77 1c 31 d2 0f b7 40 0a 89 f1 03 45 d0 d1 e9 03 0d 23 4e 00 00 69 c0 24 f4 00 00 8d 04 01 48 8b 4d c0 <f7> f6 8a 55 d6 88 53 04 41 89 c4 c1 e8 08 88 43 01 8a 45 d7 44 RIP [<ffffffffa09bc37a>] simple_dvb_calc_regs+0xab/0x281 [tuner_simple] RSP <ffff8800605dfd30> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
The GPIO logic for LNA control on the Tiger r2 devices was inverted. This patch corrects the problem. Signed-off-by:
-
Michael Krufky authored
negative gpio values signify inverted polarity Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Klaus Schmidinger authored
Report to userspace that cx24116 and stv0899 drivers support DVB-S2. Signed-off by: Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de> Acked-by:
Steven Toth <stoth@linuxtv.org> Signed-off-by:
-
Klaus Schmidinger authored
The attached patch adds a capability flag that allows an application to determine whether a particular device can handle "second generation modulation" transponders. This is necessary in order for applications to be able to decide which device to use for a given channel in a multi device environment, where DVB-S and DVB-S2 devices are mixed. It is assumed that a device capable of handling "second generation modulation" can implicitly handle "first generation modulation". The flag is not named anything with DVBS2 in order to allow its use with future DVBT2 devices as well (should they ever come). Signed-off by: Klaus Schmidinger <Klaus.Schmidinger@cadsoft.de> Acked-by:
-
Mauro Carvalho Chehab authored
Some devices require different setups on struct_audio. Due to that, we may need to change some fields at dev.adev during device probe. So, this patch moves the dynamic memory allocation of adev at em28xx-alsa to the dynamic allocation of struct em28xx dev that happens during device probe. Signed-off-by: -
Mauro Carvalho Chehab authored
Signed-off-by: -
Pham Thanh Nam authored
This patch fixes autodetection for Avermedia AVerTV GO 007 FM Plus (M15C) (PCI ID 1461:f31d). Signed-off-by:
Pham Thanh Nam <phamthanhnam.ptn@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
em2710 uses the same chip ID as em2820 (0x12). Signed-off-by: -
Mark Lord authored
Signed-off-by:
Mark Lord <mlord@pobox.com> Cc: Greg KH <greg@kroah.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> [tobias.lorenz@gmx.net: Code beautifications and documentation added] Signed-off-by:
Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by:
-
Pham Thanh Nam authored
This patch adds support for Avermedia AVer TV GO 007 FM Plus (M15C) on saa7134 driver (PCI ID 1461:f31d). Signed-off-by:
-
Fabio Belavenuto authored
Add support for radio driver TEA5764 from NXP. This chip is connected in pxa I2C bus in EZX phones from Motorola, the chip is used in phone model A1200. This driver is for OpenEZX project (www.openezx.org) Tested with A1200 phone, openezx kernel and fm-tools [mchehab@redhat.com: Fixed CodingStyle and solved some merge conflicts] Signed-off-by:
Fabio Belavenuto <belavenuto@gmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Dmitri Belimov authored
Signed-off-by:
Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by:
-
Dmitri Belimov authored
Signed-off-by:
-
Dmitri Belimov authored
Fix I2C bridge error in zl10353 if no tunner attached to internal I2C bus of zl10353 chip. When set enable bridge from internal I2C bus to the main I2C bus (saa7134) the main I2C bus stopped very hardly. No any communication. In our next board we solder additional resistors to internal I2C bus. Signed-off-by:
-
Mike Frysinger authored
Since ttusb_dec.c relies on pci_alloc_consistent and pci_free_consistent, make it depend on PCI in Kconfig. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
Mike Frysinger authored
Since dvb-ttusb-budget.c relies on pci_alloc_consistent and pci_free_consistent, make it depend on PCI in Kconfig. Signed-off-by:
-
roel kluin authored
Unsigned cx23417_mailbox cannot be negative Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Cyrill Gorcunov authored
Add missed MODULE check to eliminate inapropriate declaration being choosed which causes a build error. Signed-off-by:
Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by:
-
Hans Verkuil authored
Since the i2c driver ID will be removed in the near future we have to modify the v4l2 debugging API to use the driver name instead of driver ID. Note that this API is not used in applications other than v4l2-dbg.cpp as it is for debugging and testing only. Should anyone use the old VIDIOC_G_CHIP_IDENT, then this will be logged with a warning that it is deprecated and will be removed in 2.6.30. Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
This rename prevents conflicts with the older compat_ioctl32 module. Signed-off-by:
-
Hans Verkuil authored
Since internal to v4l2 the ioctl prototype is the same regardless of it being called through .ioctl or .unlocked_ioctl, we need to convert it all to the long return type of unlocked_ioctl. Thanks to Jean-Francois Moine for posting an initial patch for this and thus bringing it to our attention. Cc: Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Hans Verkuil authored
Add CONFIG_COMPAT check in Makefile. Signed-off-by:
-
Hans Verkuil authored
Mention the new v4l2_file_operations struct. Signed-off-by:
-
Hans Verkuil authored
Introduce a struct v4l2_file_operations for v4l2 drivers. Remove the unnecessary inode argument. Move compat32 handling (and llseek) into the v4l2-dev core: this is now handled in the v4l2 core and no longer in the drivers themselves. Note that this changeset reverts an earlier patch that changed the return type of__video_ioctl2 from int to long. This change will be reinstated later in a much improved version. Signed-off-by:
-
Hans Verkuil authored
Update the documentation now that the v4l2_dev field is in. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Linus Torvalds authored
These compiler versions are known to miscompile __weak functions and thus generate kernels that don't necessarily work correctly. If a weak function is int he same compilation unit as a caller, gcc may end up inlining it, and thus binding the weak function too early. See http://gcc.gnu.org/bugzilla/show_bug.cgi?id=27781 for details. Cc: Adrian Bunk <bunk@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
- include the gcc version-dependent header files from the generic gcc header file, rather than the other way around (iow: don't make the non-gcc header file have to know about gcc versions) - don't include compiler-gcc4.h for gcc 5 (for whenever it gets released). That's just confusing and made us do odd things in the gcc4 header file (testing that we really had version 4!) - generate the name from the __GNUC__ version directly, rather than having a mess of #if conditionals. Signed-off-by:
-
- 31 Dec, 2008 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (34 commits) nfsd race fixes: jfs nfsd race fixes: reiserfs nfsd race fixes: ext4 nfsd race fixes: ext3 nfsd race fixes: ext2 nfsd/create race fixes, infrastructure filesystem notification: create fs/notify to contain all fs notification fs/block_dev.c: __read_mostly improvement and sb_is_blkdev_sb utilization kill ->dir_notify() filp_cachep can be static in fs/file_table.c fix f_count description in Documentation/filesystems/files.txt make INIT_FS use the __RW_LOCK_UNLOCKED initialization take init_fs to saner place kill vfs_permission pass a struct path * to may_open kill walk_init_root remove incorrect comment in inode_permission expand some comments (d_path / seq_path) correct wrong function name of d_put in kernel document and source comment fix switch_names() breakage in short-to-short case ...
-
Dave Kleikamp authored
jfs version of Al Viro's nfsd race patches Signed-off-by:
Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
... and the same for reiserfs. The difference here is that we need insert_inode_locked4() to match iget5_locked(). Signed-off-by: -
Al Viro authored
Signed-off-by: -
Al Viro authored
ext3 analog of the previous patch Signed-off-by: -
Al Viro authored
* make ext2_new_inode() put the inode into icache in locked state * do not unlock until the inode is fully set up; otherwise nfsd might pick it in half-baked state. * make sure that ext2_new_inode() does *not* lead to two inodes with the same inumber hashed at the same time; otherwise a bogus fhandle coming from nfsd might race with inode creation: nfsd: iget_locked() creates inode nfsd: try to read from disk, block on that. ext2_new_inode(): allocate inode with that inumber ext2_new_inode(): insert it into icache, set it up and dirty ext2_write_inode(): get the relevant part of inode table in cache, set the entry for our inode (and start writing to disk) nfsd: get CPU again, look into inode table, see nice and sane on-disk inode, set the in-core inode from it oops - we have two in-core inodes with the same inumber live in icache, both used for IO. Welcome to fs corruption... Signed-off-by:
-
