- 27 Jul, 2013 17 commits
-
-
Sujith Manoharan authored
commit 30d5b709 upstream. For AR9485 boards with XLNA, the default gpio config is not set correctly, fix this. Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> [bwh: Backported to 3.2: adjust context] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Hauke Mehrtens authored
commit 693026ef upstream. When b43 gets build into the kernel and it should use bcma we have to ensure that bcma was also build into the kernel and not as a module. In this patch this is also done for SSB, although you can not build b43 without ssb support for now. This fixes a build problem reported by Randy Dunlap in 5187EB95.2060605@infradead.org Reported-By:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Tejun Heo authored
commit 7a87718d upstream. For some reason, a lot of port-multipliers have issues with softreset. SIMG [34]7x series port-multipliers have been quite erratic in this regard. I recall that it was better with some firmware revisions and the current list of quirks worked fine for a while. I think it got worse with later firmwares or maybe my test coverage wasn't good enough. Anyways, HPA is reporting that his 3726 setup suffers SRST failures and then the PMP gets confused and fails to probe the last port. The hope was that we try to stick to the standard as much as possible and soonish the PMPs and their firmwares will improve in quality, so the quirk list was kept to minimum. Well, it seems like that's never gonna happen. Let's set NO_SRST for all [34]7x PMPs so that whatever remaining userbase of the device suffer the least. Maybe we should do the same for 57xx's but unfortunately I don't have any device left to test and I'm not even sure 57xx's have ever been made widely available, so let's leave those alone for now. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
"H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
UCHINO Satoshi authored
commit d68c277b upstream. Without this memory barrier, the file-storage thread may fail to escape from the following while loop, because it may observe new common->thread_wakeup_needed and old bh->state which are updated by the callback functions. /* Wait for the CBW to arrive */ while (bh->state != BUF_STATE_FULL) { rc = sleep_thread(common); if (rc) return rc; } Signed-off-by:
UCHINO Satoshi <satoshi.uchino@toshiba.co.jp> Acked-by:
Michal Nazarewicz <mina86@mina86.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Shane Huang authored
commit 912b9ac6 upstream. ata_link_online() check in ahci_error_intr() is unnecessary, it should be removed otherwise may lead to lockup with FBS enabled PMP. http://marc.info/?l=linux-ide&m=137050421603272&w=2Reported-by:
Yu Liu <liuyu.ac@gmail.com> Signed-off-by:
Shane Huang <shane.huang@amd.com> Signed-off-by:
-
Jiang Liu authored
commit 5863e10b upstream. Use zram->init_lock to protect access to zram->meta, otherwise it may cause invalid memory access if zram->meta has been freed by zram_reset_device(). This issue may be triggered by: Thread 1: while true; do cat mem_used_total; done Thread 2: while true; do echo 8M > disksize; echo 1 > reset; done Signed-off-by:
Jiang Liu <jiang.liu@huawei.com> Acked-by:
Minchan Kim <minchan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Jiang Liu authored
commit 12a7ad3b upstream. Function valid_io_request() should verify the entire request are within the zram device address range. Otherwise it may cause invalid memory access when accessing/modifying zram->meta->table[index] because the 'index' is out of range. Then it may access non-exist memory, randomly modify memory belong to other subsystems, which is hard to track down. Signed-off-by:
-
Jiang Liu authored
commit 39a9b8ac upstream. On error recovery path of zram_init(), it leaks the zram device object causing the failure. So change create_device() to free allocated resources on error path. Signed-off-by:
Jerome Marchand <jmarchan@redhat.com> Signed-off-by:
-
Jiang Liu authored
commit 57ab0485 upstream. zram_slot_free_notify() is free-running without any protection from concurrent operations. So there are race conditions between zram_bvec_read()/zram_bvec_write() and zram_slot_free_notify(), and possible consequences include: 1) Trigger BUG_ON(!handle) on zram_bvec_write() side. 2) Access to freed pages on zram_bvec_read() side. 3) Break some fields (bad_compress, good_compress, pages_stored) in zram->stats if the swap layer makes concurrently call to zram_slot_free_notify(). So enhance zram_slot_free_notify() to acquire writer lock on zram->lock before calling zram_free_page(). Signed-off-by:
-
Jiang Liu authored
commit 6030ea9b upstream. Memory for zram->disk object may have already been freed after returning from destroy_device(zram), then it's unsafe for zram_reset_device(zram) to access zram->disk again. We can't solve this bug by flipping the order of destroy_device(zram) and zram_reset_device(zram), that will cause deadlock issues to the zram sysfs handler. So fix it by holding an extra reference to zram->disk before calling destroy_device(zram). Signed-off-by:
-
Shane Huang authored
commit b996ac90 upstream. To add AMD CZ SMBus controller device ID. [bhelgaas: drop pci_ids.h update] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Jean Delvare <khali@linux-fr.org> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Shane Huang authored
commit fafe5c3d upstream. To add AMD CZ SATA controller device ID of IDE mode. [bhelgaas: drop pci_ids.h update] Signed-off-by:
-
Steffen Maier authored
commit 9edf7d75 upstream. Commit 64deb6ef "[SCSI] zfcp: Use status_read_buf_num provided by FCP channel" started using a value returned by the channel but only evaluated the value if the fabric link is up. Commit 8d88cf3f "[SCSI] zfcp: Update status read mempool" introduced mempool resizings based on the above value. On setting an FCP device online for the very first time since boot, a new zeroed adapter object is allocated. If the link is down, the number of status read requests remains zero. Since just the config data exchange is incomplete, we proceed with adapter open recovery. However, we unconditionally call mempool_resize with adapter->stat_read_buf_num == 0 in this case. This causes a kernel message "kernel BUG at mm/mempool.c:131!" in process "zfcperp<FCP-device-bus-ID>" with last function mempool_resize in Krnl PSW and zfcp_erp_thread in the Call Trace. Don't evaluate channel values which are invalid on link down. The number of status read requests is always valid, evaluated, and set to a positive minimum greater than zero. The adapter open recovery can proceed and the channel has status read buffers to inform us on a future link up event. While we are not aware of any other code path that could result in mempool resize attempts of size zero, we still also initialize the number of status read buffers to be posted to a static minimum number on adapter object allocation. Signed-off-by:
Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by:
James Bottomley <JBottomley@Parallels.com> [bwh: Backported to 3.2: - Copyright notice changed slightly - Don't use zfcp_fsf_convert_portspeed()] Signed-off-by:
-
Steffen Maier authored
commit 5fea4291 upstream. Commit 86a9668a "[SCSI] zfcp: support for hardware data router" reduced the initial block queue limits in the scsi_host_template to the absolute minimum and adjusted them later on. However, the adjustment was too late for the BSG devices of Scsi_Host and fc_host. Therefore, ioctl(..., SG_IO, ...) with request or response size > 4kB to a BSG device of an fc_host or a Scsi_Host fails with EINVAL. As a result, users of such ioctl such as HBA_SendCTPassThru() in libzfcphbaapi return with error HBA_STATUS_ERROR. Initialize the block queue limits in zfcp_scsi_host_template to the greatest common denominator (GCD). While we cannot exploit the slightly enlarged maximum request size with data router, this should be neglectible. Doing so also avoids running into trouble after live guest relocation (LGR) / migration from a data router FCP device to an FCP device that does not support data router. In that case, zfcp would figure out the new limits on adapter recovery, but the fc_host and Scsi_Host (plus in fact all sdevs) still exist with the old and now too large queue limits. It should also OK, not to use half the size as in the DIX case, because fc_host and Scsi_Host do not transport FCP requests including SCSI commands using protection data. Signed-off-by:
Martin Peschke <mpeschke@linux.vnet.ibm.com> Signed-off-by:
-
Daniel Hansel authored
commit f76ccaac upstream. FCP device remains in status ERP_FAILED when device is switched online or adapter recovery is triggered while link to SAN is down. When Exchange Configuration Data command returns the FSF status FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE it aborts the exchange process. The only retries are done during the common error recovery procedure (i.e. max. 3 retries with 8sec sleep between) and remains in status ERP_FAILED with QDIO down. This commit reverts the commit 0df13847 (zfcp: Fix adapter activation on link down). When FSF status FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE is received the adapter recovery will be finished without any retries. QDIO will be up now and status changes such as LINK UP will be received now. Signed-off-by:
Daniel Hansel <daniel.hansel@linux.vnet.ibm.com> Signed-off-by:
-
Bu, Yitian authored
commit dbda92d1 upstream. commit 07354eb1 ("locking printk: Annotate logbuf_lock as raw") reintroduced a lock inversion problem which was fixed in commit 0b5e1c52 ("printk: Release console_sem after logbuf_lock"). This happened probably when fixing up patch rejects. Restore the ordering and unlock logbuf_lock before releasing console_sem. Signed-off-by:
ybu <ybu@qti.qualcomm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/E807E903FE6CBE4D95E420FBFCC273B827413C@nasanexd01h.na.qualcomm.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> [bwh: Backported to 3.2: adjust context] Signed-off-by:
-
Ben Hutchings authored
The workaround introduced by commit e5195c1f 'r8169: fix 8168evl frame padding.' upstream was incorrect and was entirely replaced in commit b423e9ae 'r8169: fix offloaded tx checksum for small packets.' On the 3.2.y branch, the first commit has effectively been applied twice: the first time by itself, and the second time in commit 3cf40360 which squashed the two upstream commits together. That left us with both the incorrect and the correct workaround in place. Remove the incorrect one. Signed-off-by:
-
- 29 Jun, 2013 23 commits
-
-
Ben Hutchings authored
-
Dave Chiluk authored
commit 698b8223 upstream. 1d2ef590 caused a regression in ncpfs such that directories could no longer be removed. This was because ncp_rmdir checked to see if a dentry could be unhashed before allowing it to be removed. Since 1d2ef590 introduced a change that incremented dentry->d_count causing it to always be greater than 1 unhash would always fail. Thus causing the error path in ncp_rmdir to always be taken. Removing this error path is safe as unhashing is still accomplished by calls to dput from vfs_rmdir. Signed-off-by:
Dave Chiluk <chiluk@canonical.com> Signed-off-by:
Petr Vandrovec <petr@vandrovec.name> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit a6f79d0f ] PPPoL2TP sockets should comply with the standard send*() return values (i.e. return number of bytes sent instead of 0 upon success). Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit 55b92b7a ] Copy user data after PPP framing header. This prevents erasure of the added PPP header and avoids leaking two bytes of uninitialised memory at the end of skb's data buffer. Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 2dc85bf3 ] uaddr->sa_data is exactly of size 14, which is hard-coded here and passed as a size argument to strncpy(). A device name can be of size IFNAMSIZ (== 16), meaning we might leave the destination string unterminated. Thus, use strlcpy() and also sizeof() while we're at it. We need to memset the data area beforehand, since strlcpy does not padd the remaining buffer with zeroes for user space, so that we do not possibly leak anything. Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 1abd165e ] While stress testing sctp sockets, I hit the following panic: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 IP: [<ffffffffa0490c4e>] sctp_endpoint_free+0xe/0x40 [sctp] PGD 7cead067 PUD 7ce76067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: sctp(F) libcrc32c(F) [...] CPU: 7 PID: 2950 Comm: acc Tainted: GF 3.10.0-rc2+ #1 Hardware name: Dell Inc. PowerEdge T410/0H19HD, BIOS 1.6.3 02/01/2011 task: ffff88007ce0e0c0 ti: ffff88007b568000 task.ti: ffff88007b568000 RIP: 0010:[<ffffffffa0490c4e>] [<ffffffffa0490c4e>] sctp_endpoint_free+0xe/0x40 [sctp] RSP: 0018:ffff88007b569e08 EFLAGS: 00010292 RAX: 0000000000000000 RBX: ffff88007db78a00 RCX: dead000000200200 RDX: ffffffffa049fdb0 RSI: ffff8800379baf38 RDI: 0000000000000000 RBP: ffff88007b569e18 R08: ffff88007c230da0 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff880077990d00 R14: 0000000000000084 R15: ffff88007db78a00 FS: 00007fc18ab61700(0000) GS:ffff88007fc60000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000020 CR3: 000000007cf9d000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88007b569e38 ffff88007db78a00 ffff88007b569e38 ffffffffa049fded ffffffff81abf0c0 ffff88007db78a00 ffff88007b569e58 ffffffff8145b60e 0000000000000000 0000000000000000 ffff88007b569eb8 ffffffff814df36e Call Trace: [<ffffffffa049fded>] sctp_destroy_sock+0x3d/0x80 [sctp] [<ffffffff8145b60e>] sk_common_release+0x1e/0xf0 [<ffffffff814df36e>] inet_create+0x2ae/0x350 [<ffffffff81455a6f>] __sock_create+0x11f/0x240 [<ffffffff81455bf0>] sock_create+0x30/0x40 [<ffffffff8145696c>] SyS_socket+0x4c/0xc0 [<ffffffff815403be>] ? do_page_fault+0xe/0x10 [<ffffffff8153cb32>] ? page_fault+0x22/0x30 [<ffffffff81544e02>] system_call_fastpath+0x16/0x1b Code: 0c c9 c3 66 2e 0f 1f 84 00 00 00 00 00 e8 fb fe ff ff c9 c3 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 <48> 8b 47 20 48 89 fb c6 47 1c 01 c6 40 12 07 e8 9e 68 01 00 48 RIP [<ffffffffa0490c4e>] sctp_endpoint_free+0xe/0x40 [sctp] RSP <ffff88007b569e08> CR2: 0000000000000020 ---[ end trace e0d71ec1108c1dd9 ]--- I did not hit this with the lksctp-tools functional tests, but with a small, multi-threaded test program, that heavily allocates, binds, listens and waits in accept on sctp sockets, and then randomly kills some of them (no need for an actual client in this case to hit this). Then, again, allocating, binding, etc, and then killing child processes. This panic then only occurs when ``echo 1 > /proc/sys/net/sctp/auth_enable'' is set. The cause for that is actually very simple: in sctp_endpoint_init() we enter the path of sctp_auth_init_hmacs(). There, we try to allocate our crypto transforms through crypto_alloc_hash(). In our scenario, it then can happen that crypto_alloc_hash() fails with -EINTR from crypto_larval_wait(), thus we bail out and release the socket via sk_common_release(), sctp_destroy_sock() and hit the NULL pointer dereference as soon as we try to access members in the endpoint during sctp_endpoint_free(), since endpoint at that time is still NULL. Now, if we have that case, we do not need to do any cleanup work and just leave the destruction handler. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
Gao feng authored
[ Upstream commit 534c8779 ] Commit 25fb6ca4 "net IPv6 : Fix broken IPv6 routing table after loopback down-up" forgot to assign rt6_info to the inet6_ifaddr. When disable the net device, the rt6_info which allocated in init_loopback will not be destroied in __ipv6_ifa_notify. This will trigger the waring message below [23527.916091] unregister_netdevice: waiting for tap0 to become free. Usage count = 1 Reported-by:
Arkadiusz Miskiewicz <a.miskiewicz@gmail.com> Signed-off-by:
Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit c87a124a ] Roman Gushchin discovered that udp4_lib_lookup2() was not reloading first item in the rcu protected list, in case the loop was restarted. This produced soft lockups as in https://lkml.org/lkml/2013/4/16/37 rcu_dereference(X)/ACCESS_ONCE(X) seem to not work as intended if X is ptr->field : In some cases, gcc caches the value or ptr->field in a register. Use a barrier() to disallow such caching, as documented in Documentation/atomic_ops.txt line 114 Thanks a lot to Roman for providing analysis and numerous patches. Diagnosed-by:
Roman Gushchin <klamm@yandex-team.ru> Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Boris Zhmurov <zhmurov@yandex-team.ru> Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Andy Lutomirski authored
[ Upstream commits 1be374a0 and a7526eb5 ] MSG_CMSG_COMPAT is (AFAIK) not intended to be part of the API -- it's a hack that steals a bit to indicate to other networking code that a compat entry was used. So don't allow it from a non-compat syscall. This prevents an oops when running this code: int main() { int s; struct sockaddr_in addr; struct msghdr *hdr; char *highpage = mmap((void*)(TASK_SIZE_MAX - 4096), 4096, PROT_READ | PROT_WRITE, MAP_PRIVATE | MAP_ANONYMOUS | MAP_FIXED, -1, 0); if (highpage == MAP_FAILED) err(1, "mmap"); s = socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP); if (s == -1) err(1, "socket"); addr.sin_family = AF_INET; addr.sin_port = htons(1); addr.sin_addr.s_addr = htonl(INADDR_LOOPBACK); if (connect(s, (struct sockaddr*)&addr, sizeof(addr)) != 0) err(1, "connect"); void *evil = highpage + 4096 - COMPAT_MSGHDR_SIZE; printf("Evil address is %p\n", evil); if (syscall(__NR_sendmmsg, s, evil, 1, MSG_CMSG_COMPAT) < 0) err(1, "sendmmsg"); return 0; } Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit a6222602 ] Daniel Petre reported crashes in icmp_dst_unreach() with following call graph: Daniel found a similar problem mentioned in http://lkml.indiana.edu/hypermail/linux/kernel/1007.0/00961.html And indeed this is the root cause : skb->cb[] contains data fooling IP stack. We must clear IPCB in ip_tunnel_xmit() sooner in case dst_link_failure() is called. Or else skb->cb[] might contain garbage from GSO segmentation layer. A similar fix was tested on linux-3.9, but gre code was refactored in linux-3.10. I'll send patches for stable kernels as well. Many thanks to Daniel for providing reports, patches and testing ! Reported-by:
Daniel Petre <daniel.petre@rcs-rds.ro> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 547669d4 ] commit 3853b584 ("xps: Improvements in TX queue selection") introduced ooo_okay flag, but the condition to set it is slightly wrong. In our traces, we have seen ACK packets being received out of order, and RST packets sent in response. We should test if we have any packets still in host queue. Signed-off-by:
-
Stefan Bader authored
[ Upstream commits e5195c1f and b423e9ae ] Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> Acked-by:
Francois Romieu <romieu@fr.zoreil.com> Cc: hayeswang <hayeswang@realtek.com> Signed-off-by:
-
Paul Moore authored
[ Upstream commit 6b21e1b7 ] The net/netlabel/netlabel_domainhash.c:netlbl_domhsh_add() function does not properly validate new domain hash entries resulting in potential problems when an administrator attempts to add an invalid entry. One such problem, as reported by Vlad Halilov, is a kernel BUG (found in netlabel_domainhash.c:netlbl_domhsh_audit_add()) when adding an IPv6 outbound mapping with a CIPSO configuration. This patch corrects this problem by adding the necessary validation code to netlbl_domhsh_add() via the newly created netlbl_domhsh_validate() function. Ideally this patch should also be pushed to the currently active -stable trees. Reported-by:
Vlad Halilov <vlad.halilov@gmail.com> Signed-off-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 284041ef ] commit 0178b695 ("ipv6: Copy cork options in ip6_append_data") added some code duplication and bad error recovery, leading to potential crash in ip6_cork_release() as kfree() could be called with garbage. use kzalloc() to make sure this wont happen. Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit e5f5e380 ] Add the missing iounmap() before return from gianfar_ptp_probe() in the error handling case. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 54d27fcb ] TCP md5 communications fail [1] for some devices, because sg/crypto code assume page offsets are below PAGE_SIZE. This was discovered using mlx4 driver [2], but I suspect loopback might trigger the same bug now we use order-3 pages in tcp_sendmsg() [1] Failure is giving following messages. huh, entered softirq 3 NET_RX ffffffff806ad230 preempt_count 00000100, exited with 00000101? [2] mlx4 driver uses order-2 pages to allocate RX frags Reported-by:
Matt Schnall <mischnal@google.com> Signed-off-by:
-
Vivek Goyal authored
commit e9986f30 upstream. If a virtio disk is open in guest and a disk resize operation is done, (virsh blockresize), new size is not visible to tools like "fdisk -l". This seems to be happening as we update only part->nr_sects and not bdev->bd_inode size. Call revalidate_disk() which should take care of it. I tested growing disk size of already open disk and it works for me. Signed-off-by:
Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Ben Hutchings authored
This reverts commit 39314361, which was commit f05bb0c7 upstream. This has been found to cause GPU hangs when backported to 3.2, though not in mainline. References: http://bugs.launchpad.net/bugs/1140716 Cc: Steve Conklin <sconklin@canonical.com> Cc: Stefan Bader <stefan.bader@canonical.com> Cc: Bradd Figg <brad.figg@canonical.com> Cc: Luis Henriques <luis.henriques@canonical.com> Signed-off-by:
-
Ben Hutchings authored
commit b8cb62f8 upstream. 1. Check for allocation failure 2. Clear the buffer contents, as they may actually be written to flash 3. Don't leak the buffer Compile-tested only. [ Tested successfully on my buggy ASUS machine - Matt ] Signed-off-by:
Matt Fleming <matt.fleming@intel.com>
-
Matthew Garrett authored
commit f8b84043 upstream. This patch reworks the UEFI anti-bricking code, including an effective reversion of cc5a080c and 31ff2f20. It turns out that calling QueryVariableInfo() from boot services results in some firmware implementations jumping to physical addresses even after entering virtual mode, so until we have 1:1 mappings for UEFI runtime space this isn't going to work so well. Reverting these gets us back to the situation where we'd refuse to create variables on some systems because they classify deleted variables as "used" until the firmware triggers a garbage collection run, which they won't do until they reach a lower threshold. This results in it being impossible to install a bootloader, which is unhelpful. Feedback from Samsung indicates that the firmware doesn't need more than 5KB of storage space for its own purposes, so that seems like a reasonable threshold. However, there's still no guarantee that a platform will attempt garbage collection merely because it drops below this threshold. It seems that this is often only triggered if an attempt to write generates a genuine EFI_OUT_OF_RESOURCES error. We can force that by attempting to create a variable larger than the remaining space. This should fail, but if it somehow succeeds we can then immediately delete it. I've tested this on the UEFI machines I have available, but I don't have a Samsung and so can't verify that it avoids the bricking problem. Signed-off-by:
Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by: Lee, Chun-Y <jlee@suse.com> [ dummy variable cleanup ] Signed-off-by:
-
Anders Hammarquist authored
commit 35a2fbc9 upstream. Add product id for Abbott strip port cable for Precision meter which uses the TI 3410 chip. Signed-off-by:
Anders Hammarquist <iko@iko.pp.se> Signed-off-by:
-
Randy Dunlap authored
commit d1603990 upstream. Fix kconfig warning and build errors on x86_64 by selecting BINFMT_ELF when COMPAT_BINFMT_ELF is being selected. warning: (IA32_EMULATION) selects COMPAT_BINFMT_ELF which has unmet direct dependencies (COMPAT && BINFMT_ELF) fs/built-in.o: In function `elf_core_dump': compat_binfmt_elf.c:(.text+0x3e093): undefined reference to `elf_core_extra_phdrs' compat_binfmt_elf.c:(.text+0x3ebcd): undefined reference to `elf_core_extra_data_size' compat_binfmt_elf.c:(.text+0x3eddd): undefined reference to `elf_core_write_extra_phdrs' compat_binfmt_elf.c:(.text+0x3f004): undefined reference to `elf_core_write_extra_data' [ hpa: This was sent to me for -next but it is a low risk build fix ] Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Zhanghaoyu (A) authored
commit 764bcbc5 upstream. __kvm_set_xcr function does the CPL check when set xcr. __kvm_set_xcr is called in two flows, one is invoked by guest, call stack shown as below, handle_xsetbv(or xsetbv_interception) kvm_set_xcr __kvm_set_xcr the other one is invoked by host, for example during system reset: kvm_arch_vcpu_ioctl kvm_vcpu_ioctl_x86_set_xcrs __kvm_set_xcr The former does need the CPL check, but the latter does not. Signed-off-by:
Zhang Haoyu <haoyu.zhang@huawei.com> [Tweaks to commit message. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
