- 06 Apr, 2021 11 commits
-
-
Thomas Bogendoerfer authored
All get_fs/set_fs calls in MIPS code are gone, so remove implementation of it. With the clear separation of user/kernel space access we no longer need the EVA special handling, so get rid of that, too. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Christoph Hellwig <hch@lst.de>
-
Thomas Bogendoerfer authored
Use new helpers to access user/kernel for functions, which are used with user/kernel pointers. Instead of dealing with get_fs/set_fs select user/kernel access via parameter. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Christoph Hellwig <hch@lst.de>
-
Thomas Bogendoerfer authored
Added __get/__put_kernel_nofault as preparation for removing get/set_fs. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Christoph Hellwig <hch@lst.de>
-
Thomas Bogendoerfer authored
flush_icache_range always does flush kernel address ranges, so no need to do the set_fs dance. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Christoph Hellwig <hch@lst.de>
-
Florian Fainelli authored
Provide hooks to intercept bad usages of virt_to_phys() and __pa_symbol() throughout the kernel. To make this possible, we need to rename the current implement of virt_to_phys() into __virt_to_phys_nodebug() and wrap it around depending on CONFIG_DEBUG_VIRTUAL. A similar thing is needed for __pa_symbol() which is now aliased to __phys_addr_symbol() whose implementation is either the direct return of RELOC_HIDE or goes through the debug version. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Álvaro Fernández Rojas authored
- Rename periph_clk to periph_osc. - Rename clkctl to periph_clk. - Move syscon-reboot to subnode. - Add hsspi-osc clock. - Add watchdog. - Add HS SPI controller - Add NAND controller. - Add USBH PHY. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Álvaro Fernández Rojas authored
- Rename periph_clk to periph_osc. - Rename clkctl to periph_clk. - Move syscon-reboot to subnode. - Add watchdog controller. - Add SPI controller. - Add NAND controller. - Add USBH PHY controller. - Add RNG controller. - Add cfi-flash controller. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Álvaro Fernández Rojas authored
- Rename periph_clk to periph_osc. - Rename clkctl to periph_clk. - Move syscon-reboot to subnode. - Add hsspi-osc clock. - Add watchdog. - Add SPI controller. - Add HS SPI controller. - Add NAND controller. - Add USBH PHY. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Álvaro Fernández Rojas authored
- Rename periph_clk to periph_osc. - Rename clkctl to periph_clk. - Move syscon-reboot to subnode. - Add watchdog. - Add SPI controller. - Add USBH PHY. - Add cfi-flash. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Álvaro Fernández Rojas authored
- Rename periph_clk to periph_osc. - Rename clkctl to periph_clk. - Move syscon-reboot to subnode. - Add hsspi-osc clock. - Add watchdog. - Add HS SPI controller. - Add NAND controller. - Add USBH PHY. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Álvaro Fernández Rojas authored
Commit a23c4134 added the clock controller nodes, incorrectly changing the syscon-reboot nodes addresses. Fixes: a23c4134 ("MIPS: BMIPS: add clock controller nodes") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
- 30 Mar, 2021 1 commit
-
-
Wang Qing authored
The TODO file here has not been updated for 15 years, and the function development described in the file have been implemented or abandoned. Its existence will mislead developers seeking to view outdated information. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
- 29 Mar, 2021 7 commits
-
-
Qing Zhang authored
When using the Loongson-3A4000 machine for serial port debugging, there is no /dev/ttyUSB* output, which makes the serial port unavailable, For convenience, we open this configuration. zhangqing@loongson-pc:~$ cat /sys/firmware/lefi/boardinfo Board Info Manufacturer : THTF Board Name : THTF-LS3A4000-7A1000-ML4A Family : LOONGSON3 BIOS Info Vendor : ZD tech Version : ZD tech-V2.1.1 ROM Size : 4 KB Release Date : 2020-06-29 zhangqing@loongson-pc:~$ lsusb Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 005 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 005 Device 002: ID 0c45:760b Microdia USB Keyboard Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 003: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Ilya Lipnitskiy authored
poly1305-core.S is an auto-generated file, so it should be ignored. Fixes: a11d055e ("crypto: mips/poly1305 - incorporate OpenSSL/CRYPTOGAMS optimized implementation") Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Chuanhong Guo authored
mt7621 has the following memory map: 0x0-0x1c000000: lower 448m memory 0x1c000000-0x2000000: peripheral registers 0x20000000-0x2400000: higher 64m memory detect_memory_region in arch/mips/kernel/setup.c only adds the first memory region and isn't suitable for 512m memory detection because it may accidentally read the memory area for peripheral registers. This commit adds memory detection capability for mt7621: 1. Add the highmem area when 512m is detected. 2. Guard memcmp from accessing peripheral registers: This only happens when a user decided to change kernel load address to 256m or higher address. Since this is a quite unusual case, we just skip 512m testing and return 256m as memory size. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> [Minor commit message reword, make mt7621_memory_detect static] Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Ilya Lipnitskiy authored
prom_soc_init is only called from prom_init in arch/mips/ralink/prom.c, which is already annotated with __init, so annotate prom_soc_init with __init too. Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Julian Braha authored
When CAVIUM_OCTEON_SOC is enabled, and MTD is disabled, Kbuild gives the following warning: WARNING: unmet direct dependencies detected for MTD_COMPLEX_MAPPINGS Depends on [n]: MTD [=n] && HAS_IOMEM [=y] Selected by [y]: - CAVIUM_OCTEON_SOC [=y] && <choice> This is because CAVIUM_OCTEON_SOC selects MTD_COMPLEX_MAPPINGS, without selecting or depending on MTD, despite MTD_COMPLEX_MAPPINGS depending on MTD. Signed-off-by: Julian Braha <julianbraha@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Julian Braha authored
When SB1XXX_CORELIS is enabled, COMPILE_TEST is disabled, and DEBUG_KERNEL is disabled, Kbuild gives the following warning: WARNING: unmet direct dependencies detected for DEBUG_INFO Depends on [n]: DEBUG_KERNEL [=n] && !COMPILE_TEST [=n] Selected by [y]: - SB1XXX_CORELIS [=y] && SIBYTE_SB1xxx_SOC [=y] && !COMPILE_TEST [=n] This is because SB1XXX_CORELIS selects DEBUG_INFO without selecting or depending on DEBUG_KERNEL, despite DEBUG_INFO depending on DEBUG_KERNEL. Signed-off-by: Julian Braha <julianbraha@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Tiezhu Yang authored
After commit 0ebeea8c ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work"), bpf_probe_read{, str}() functions were no longer available on MIPS, so there exist some errors when running bpf program: root@linux:/home/loongson/bcc# python examples/tracing/task_switch.py bpf: Failed to load program: Invalid argument [...] 11: (85) call bpf_probe_read#4 unknown func bpf_probe_read#4 [...] Exception: Failed to load BPF program count_sched: Invalid argument ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE should be restricted to archs with non-overlapping address ranges, but they can overlap in EVA mode on MIPS, so select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE if !EVA in arch/mips/Kconfig, otherwise the bpf old helper bpf_probe_read() will not be available. This is similar with the commit d195b1d1 ("powerpc/bpf: Enable bpf_probe_read{, str}() on powerpc again"). Fixes: 0ebeea8c ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
- 25 Mar, 2021 9 commits
-
-
Huang Pei authored
When page size larger than 16KB, arguments "vaddr + size(16KB)" in "ioremap_page_range(vaddr, vaddr + size,...)" called by "add_legacy_isa_io" is not page-aligned. As loongson64 needs at least page size 16KB to get rid of cache alias, and "vaddr" is 64KB-aligned, and 64KB is largest page size supported, rounding "size" up to PAGE_SIZE is enough for all page size supported. Fixes: 6d0068ad ("MIPS: Loongson64: Process ISA Node in DeviceTree") Signed-off-by: Huang Pei <huangpei@loongson.cn> Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Krzysztof Kozlowski authored
The Ralink MIPS platform does not use Common Clock Framework and does not define certain clock operations leading to compile test failures: /usr/bin/mips-linux-gnu-ld: drivers/usb/phy/phy-tegra-usb.o: in function `tegra_usb_phy_init': phy-tegra-usb.c:(.text+0x1dd4): undefined reference to `clk_get_parent' Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: John Crispin <john@phrozen.org> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Qing Zhang authored
Add default config for Loongson-2K1000. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Tested-by: Ming Wang <wangming01@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Qing Zhang authored
Add liointc-2.0 properties support, so update the maxItems and condition description. Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Tested-by: Ming Wang <wangming01@loongson.cn> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Qing Zhang authored
Add IO interrupt controller support for Loongson-2K1000, different from the Loongson-3A series is that Loongson-2K1000 has 64 interrupt sources, 0-31 correspond to the device tree liointc0 device node, and the other correspond to liointc1 node. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Tested-by: Ming Wang <wangming01@loongson.cn> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Qing Zhang authored
Distinguish between Loongson-3A series CPU and Loongson-2K1000 CPU UART0. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Tested-by: Ming Wang <wangming01@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Qing Zhang authored
Get the fixed-clock from the CPU0 node of the device tree. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Tested-by: Ming Wang <wangming01@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Qing Zhang authored
Add DTB boot support, only support Loongson-2K1000 processor for now, determine whether to use the built-in DTB or the DTB from the firmware by checking the range of CKSEG0 and XKPHYS. loongson_fw_interface will be used in the future. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Tested-by: Ming Wang <wangming01@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Qing Zhang authored
Add DeviceTree files for Loongson-2K1000 processor, currently only supports single-core boot. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Qing Zhang <zhangqing@loongson.cn> Tested-by: Ming Wang <wangming01@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
- 24 Mar, 2021 10 commits
-
-
Huang Pei authored
commit ba9196d2 ("MIPS: Make DIEI support as a config option") use CPU_HAS_DIEI to indicate whether di/ei is implemented correctly, without this patch, "local_irq_disable" from entry.S in 3A1000 (with buggy di/ei) lose protection of commit e97c5b60 ("MIPS: Make irqflags.h functions preempt-safe for non-mipsr2 cpus") Fixes: ba9196d2 ("MIPS: Make DIEI support as a config option") Signed-off-by: Huang Pei <huangpei@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Maciej W. Rozycki authored
Enable support for the onboard PATA PIO mode3 interface, which is one of the boot devices supported by the CFE firmware with the Broadcom SWARM board. Include disk, CD-ROM and generic storage drivers. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Maciej W. Rozycki authored
Options have been removed and reordered since the last update, so regenerate the template so as not to interfere with actual changes. Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Christoph Hellwig authored
Various malta defconfigs enable CONFIG_IDE for the tc86c001 ide driver, hich is a Toshiba plug in card that does not make much sense to use on bigsur platforms. For all other ATA cards libata support is already enabled. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Christoph Hellwig authored
bigsur_defconfig enables CONFIG_IDE for the tc86c001 ide driver, which is a Toshiba plug in card that does not make much sense to use on bigsur platforms. For all other ATA cards libata support is already enabled. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Christoph Hellwig authored
rbtx49xx_defconfig enables CONFIG_IDE for the tx4938 and tx4939 ide drivers, but those aren't actually used by the last known remaining user: https://lore.kernel.org/lkml/20210107.101729.1936921832901251107.anemo@mba.ocn.ne.jp/Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Christoph Hellwig authored
Use libata instead of the deprecated legacy ide driver in workpad_defconfig. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Christoph Hellwig authored
sb1250_swarm_defconfig enables CONFIG_IDE but no actual host controller driver, so just drop CONFIG_IDE, CONFIG_BLK_DEV_IDECD and CONFIG_BLK_DEV_IDETAPE as they are useless. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Bhaskar Chowdhury authored
s/packt/packet/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Bhaskar Chowdhury authored
s/techically/technically/ Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
- 14 Mar, 2021 2 commits
-
-
Wang Qing authored
debugfs_create_file_unsafe does not protect the fops handed to it against file removal. DEFINE_DEBUGFS_ATTRIBUTE makes the fops aware of the file lifetime and thus protects it against removal. Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-
Huang Pei authored
+. LOONGSON64 use 0x98xx_xxxx_xxxx_xxxx as xphys cached, instread of 0xa8xx_xxxx_xxxx_xxxx +. let CONFIG_MIPS_PGD_C0_CONTEXT depend on 64bit +. cast CAC_BASE into u64 to silence warning on MIPS32 CP0 Context has enough room for wraping pgd into its 41-bit PTEBase field. +. For XPHYS, the trick is that pgd is 4kB aligned, and the PABITS <= 53, only save 53 - 12 = 41 bits, aka : bit[63:59] | 0000 00 | bit[53:12] | 0000 0000 0000 +. for CKSEG0, only save 29 - 12 = 17 bits when switching pgd, only need to save bit[53:12] or bit[28:12] into CP0 Context's bit[63:23], see folling asm generated at run time tlbmiss_handler_setup_pgd: .set push .set noreorder dsra a2, a0, 29 move a3, a0 dins a0, zero, 29, 35 daddiu a2, a2, 4 //for CKSEG0, a2 from 0xfffffffffffffffc //into 0 movn a0, a3, a2 dsll a0, a0, 11 jr ra dmtc0 a0, CP0_CONTEXT .set pop when using it on page walking dmfc0 k0, CP0_CONTEXT dins k0, zero, 0, 23 // zero badv2 ori k0, k0, (CAC_BASE >> 53) // *prefix* with bit[63:59] drotr k0, k0, 11 // kick it in the right place Signed-off-by: Huang Pei <huangpei@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
-