- 28 Nov, 2016 10 commits
-
-
Herbert Xu authored
This patch converts lrw over to the skcipher interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Herbert Xu authored
This patch adds the simd skcipher helper which is meant to be a replacement for ablk helper. It replaces the underlying blkcipher interface with skcipher, and also presents the top-level algorithm as an skcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Herbert Xu authored
This patch adds skcipher support to cryptd alongside ablkcipher. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Herbert Xu authored
Currently all bits not set in mask are cleared in crypto_larval_lookup. This is unnecessary as wherever the type bits are used it is always masked anyway. This patch removes the clearing so that we may use bits set in the type but not in the mask for special purposes, e.g., picking up internal algorithms. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Herbert Xu authored
This patch converts xts over to the skcipher interface. It also optimises the implementation to be based on ECB instead of the underlying cipher. For compatibility the existing naming scheme of xts(aes) is maintained as opposed to the more obvious one of xts(ecb(aes)). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Herbert Xu authored
This patch converts lrw over to the skcipher interface. It also optimises the implementation to be based on ECB instead of the underlying cipher. For compatibility the existing naming scheme of lrw(aes) is maintained as opposed to the more obvious one of lrw(ecb(aes)). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Herbert Xu authored
This patch makes use of the new skcipher walk interface instead of the obsolete blkcipher walk interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Herbert Xu authored
This patch adds the skcipher walk interface which replaces both blkcipher walk and ablkcipher walk. Just like blkcipher walk it can also be used for AEAD algorithms. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Jean Delvare authored
For consistency with the other 246 kernel configuration options, rename CRYPT_CRC32C_VPMSUM to CRYPTO_CRC32C_VPMSUM. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Anton Blanchard <anton@samba.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Anton Blanchard <anton@samba.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Ard Biesheuvel authored
This integrates both the accelerated scalar and the NEON implementations of SHA-224/256 as well as SHA-384/512 from the OpenSSL project. Relative performance compared to the respective generic C versions: | SHA256-scalar | SHA256-NEON* | SHA512 | ------------+-----------------+--------------+----------+ Cortex-A53 | 1.63x | 1.63x | 2.34x | Cortex-A57 | 1.43x | 1.59x | 1.95x | Cortex-A73 | 1.26x | 1.56x | ? | The core crypto code was authored by Andy Polyakov of the OpenSSL project, in collaboration with whom the upstream code was adapted so that this module can be built from the same version of sha512-armv8.pl. The version in this patch was taken from OpenSSL commit 32bbb62ea634 ("sha/asm/sha512-armv8.pl: fix big-endian support in __KERNEL__ case.") * The core SHA algorithm is fundamentally sequential, but there is a secondary transformation involved, called the schedule update, which can be performed independently. The NEON version of SHA-224/SHA-256 only implements this part of the algorithm using NEON instructions, the sequential part is always done using scalar instructions. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 21 Nov, 2016 2 commits
-
-
PrasannaKumar Muralidharan authored
As hw_random core calls ->read with max > 32 or more, make it explicit. Also remove checks involving 'max' being less than 8. Signed-off-by: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Stephan Mueller authored
The CTR DRBG segments the number of random bytes to be generated into 128 byte blocks. The current code misses the advancement of the output buffer pointer when the requestor asks for more than 128 bytes of data. In this case, the next 128 byte block of random numbers is copied to the beginning of the output buffer again. This implies that only the first 128 bytes of the output buffer would ever be filled. The patch adds the advancement of the buffer pointer to fill the entire buffer. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 17 Nov, 2016 6 commits
-
-
Naveen N. Rao authored
First up, clean up the generated .S files properly on a 'make clean'. Secondly, force re-generation of these files when building for different endian-ness than what was built previously. Finally, generate the new files in the build tree, rather than the source tree. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Greg Tucker authored
Current multi-buffer hash implementations have a restriction on the total length of a hash job to 512MB. Hashing larger buffers will result in an incorrect hash. This extends the limit to 2^62 - 1. Signed-off-by: Greg Tucker <greg.b.tucker@intel.com> Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Alex Cope authored
GF(2^128) multiplication tables are typically used for secret information, so it's a good idea to zero them on free. Signed-off-by: Alex Cope <alexcope@google.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Wei Yongjun authored
Since clk_prepare_enable() is used to get trng->clk, we should use clk_disable_unprepare() to release it for the error path. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Geliang Tang authored
Drop duplicate header types.h from nx.c. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Geliang Tang authored
Drop duplicate header module.h from jitterentropy-kcapi.c. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 13 Nov, 2016 20 commits
-
-
Horia Geantă authored
Shared descriptors used by ahash_final() and ahash_finup() are identical, thus get rid of one of them (sh_desc_finup). Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Horia Geantă authored
The pointer to the descriptor buffer is not touched, it always points to start of the descriptor buffer. Thus, make it const. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Horia Geantă authored
sec4_sg_entry structure is used only by helper functions in sg_sw_sec4.h. Since SEC HW S/G entries are to be manipulated only indirectly, via these functions, move sec4_sg_entry to the corresponding header. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Horia Geantă authored
This reverts commit 66d2e202. Quoting from Russell's findings: https://www.mail-archive.com/linux-crypto@vger.kernel.org/msg21136.html [quote] Okay, I've re-tested, using a different way of measuring, because using openssl speed is impractical for off-loaded engines. I've decided to use this way to measure the performance: dd if=/dev/zero bs=1048576 count=128 | /usr/bin/time openssl dgst -md5 For the threaded IRQs case gives: 0.05user 2.74system 0:05.30elapsed 52%CPU (0avgtext+0avgdata 2400maxresident)k 0.06user 2.52system 0:05.18elapsed 49%CPU (0avgtext+0avgdata 2404maxresident)k 0.12user 2.60system 0:05.61elapsed 48%CPU (0avgtext+0avgdata 2460maxresident)k => 5.36s => 25.0MB/s and the tasklet case: 0.08user 2.53system 0:04.83elapsed 54%CPU (0avgtext+0avgdata 2468maxresident)k 0.09user 2.47system 0:05.16elapsed 49%CPU (0avgtext+0avgdata 2368maxresident)k 0.10user 2.51system 0:04.87elapsed 53%CPU (0avgtext+0avgdata 2460maxresident)k => 4.95 => 27.1MB/s which corresponds to an 8% slowdown for the threaded IRQ case. So, tasklets are indeed faster than threaded IRQs. [...] I think I've proven from the above that this patch needs to be reverted due to the performance regression, and that there _is_ most definitely a deterimental effect of switching from tasklets to threaded IRQs. [/quote] Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Horia Geantă authored
alkcipher_edesc_alloc() and ablkcipher_giv_edesc_alloc() don't free / unmap resources on error path: - dmap_map_sg() could fail, thus make sure the return value is checked - unmap DMA mappings in case of error Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Horia Geantă authored
ERRID is a 4-bit field. Since err_id values are in [0..15] and err_id_list array size is 16, the condition "err_id < ARRAY_SIZE(err_id_list)" is always true. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Horia Geantă authored
-replace offsetof with container_of -remove unused "assoc_nents", "iv_dma" from aead_edesc and fix comments -remove unused CAAM_MAX_IV_LENGTH #define Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Horia Geantă authored
REG3 no longer needs to be updated, since it's not used after that. This shared descriptor command is a leftover of the conversion to AEAD interface. Fixes: 479bcc7c "crypto: caam - Convert authenc to new AEAD interface" Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Horia Geantă authored
Fixes: 5ecf8ef9 "crypto: caam - fix sg dump" Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Horia Geantă authored
Fix the following smatch warnings: drivers/crypto/caam/caamalg.c:2350 aead_edesc_alloc() warn: we tested 'src_nents' before and it was 'true' drivers/crypto/caam/caamrng.c:351 caam_rng_init() error: no modifiers for allocation. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Horia Geantă authored
Fix the following sparse warning (note that endianness issues are not not addressed in current patch): drivers/crypto/caam/ctrl.c:388:24: warning: incorrect type in argument 1 (different address spaces) drivers/crypto/caam/ctrl.c:388:24: expected void [noderef] <asn:2>*reg drivers/crypto/caam/ctrl.c:388:24: got unsigned int *<noident> drivers/crypto/caam/ctrl.c:390:24: warning: incorrect type in argument 1 (different address spaces) drivers/crypto/caam/ctrl.c:390:24: expected void [noderef] <asn:2>*reg drivers/crypto/caam/ctrl.c:390:24: got unsigned int *<noident> drivers/crypto/caam/ctrl.c:548:24: warning: incorrect type in assignment (different address spaces) drivers/crypto/caam/ctrl.c:548:24: expected struct caam_ctrl [noderef] <asn:2>*ctrl drivers/crypto/caam/ctrl.c:548:24: got struct caam_ctrl *<noident> drivers/crypto/caam/ctrl.c:550:30: warning: cast removes address space of expression drivers/crypto/caam/ctrl.c:549:26: warning: incorrect type in assignment (different address spaces) drivers/crypto/caam/ctrl.c:549:26: expected struct caam_assurance [noderef] <asn:2>*assure drivers/crypto/caam/ctrl.c:549:26: got struct caam_assurance *<noident> drivers/crypto/caam/ctrl.c:554:28: warning: cast removes address space of expression drivers/crypto/caam/ctrl.c:553:24: warning: incorrect type in assignment (different address spaces) drivers/crypto/caam/ctrl.c:553:24: expected struct caam_deco [noderef] <asn:2>*deco drivers/crypto/caam/ctrl.c:553:24: got struct caam_deco *<noident> drivers/crypto/caam/ctrl.c:634:48: warning: cast removes address space of expression drivers/crypto/caam/ctrl.c:633:44: warning: incorrect type in assignment (different address spaces) drivers/crypto/caam/ctrl.c:633:44: expected struct caam_job_ring [noderef] <asn:2>*<noident> drivers/crypto/caam/ctrl.c:633:44: got struct caam_job_ring *<noident> drivers/crypto/caam/ctrl.c:648:34: warning: cast removes address space of expression drivers/crypto/caam/ctrl.c:647:30: warning: incorrect type in assignment (different address spaces) drivers/crypto/caam/ctrl.c:647:30: expected struct caam_queue_if [noderef] <asn:2>*qi drivers/crypto/caam/ctrl.c:647:30: got struct caam_queue_if *<noident> drivers/crypto/caam/ctrl.c:806:37: warning: incorrect type in assignment (different address spaces) drivers/crypto/caam/ctrl.c:806:37: expected void *data drivers/crypto/caam/ctrl.c:806:37: got unsigned int [noderef] <asn:2>* drivers/crypto/caam/ctrl.c:814:38: warning: incorrect type in assignment (different address spaces) drivers/crypto/caam/ctrl.c:814:38: expected void *data drivers/crypto/caam/ctrl.c:814:38: got unsigned int [noderef] <asn:2>* drivers/crypto/caam/ctrl.c:822:38: warning: incorrect type in assignment (different address spaces) drivers/crypto/caam/ctrl.c:822:38: expected void *data drivers/crypto/caam/ctrl.c:822:38: got unsigned int [noderef] <asn:2>* drivers/crypto/caam/jr.c:492:23: warning: incorrect type in assignment (different address spaces) drivers/crypto/caam/jr.c:492:23: expected struct caam_job_ring [noderef] <asn:2>*rregs drivers/crypto/caam/jr.c:492:23: got struct caam_job_ring *<noident> drivers/crypto/caam/caampkc.c:398:35: warning: Using plain integer as NULL pointer drivers/crypto/caam/caampkc.c:444:35: warning: Using plain integer as NULL pointer Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Horia Geantă authored
1. fix HDR_START_IDX_MASK, HDR_SD_SHARE_MASK, HDR_JD_SHARE_MASK Define HDR_START_IDX_MASK consistently with the other masks: mask = bitmask << offset 2. OP_ALG_TYPE_CLASS1 and OP_ALG_TYPE_CLASS2 must be shifted. 3. fix FIFO_STORE output data type value for AFHA S-Box 4. fix OPERATION pkha modular arithmetic source mask 5. rename LDST_SRCDST_WORD_CLASS1_ICV_SZ to LDST_SRCDST_WORD_CLASS1_IV_SZ (it refers to IV, not ICV). Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Horia Geantă authored
Commit 4464a7d4 ("crypto: caam - remove error propagation handling") removed error propagation handling only from caamalg. Do this in all other places: caamhash, caamrng. Update descriptors' lengths appropriately. Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Alex Porosanu authored
The AEAD givenc descriptor relies on moving the IV through the output FIFO and then back to the CTX2 for authentication. The SEQ FIFO STORE could be scheduled before the data can be read from OFIFO, especially since the SEQ FIFO LOAD needs to wait for the SEQ FIFO LOAD SKIP to finish first. The SKIP takes more time when the input is SG than when it's a contiguous buffer. If the SEQ FIFO LOAD is not scheduled before the STORE, the DECO will hang waiting for data to be available in the OFIFO so it can be transferred to C2. In order to overcome this, first force transfer of IV to C2 by starting the "cryptlen" transfer first and then starting to store data from OFIFO to the output buffer. Fixes: 1acebad3 ("crypto: caam - faster aead implementation") Cc: <stable@vger.kernel.org> # 3.2+ Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com> Signed-off-by: Horia Geantă <horia.geanta@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Alex Cope authored
This code is unlikely to be useful in the future because transforms don't know how often keys will be changed, new algorithms are unlikely to use lle representation, and tables should be replaced with carryless multiplication instructions when available. Signed-off-by: Alex Cope <alexcope@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Mat Martineau authored
Fix the single instance where a positive EINVAL was returned. Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Jason A. Donenfeld authored
By using the unaligned access helpers, we drastically improve performance on small MIPS routers that have to go through the exception fix-up handler for these unaligned accesses. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Acked-by: Martin Willi <martin@strongswan.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Nadim almas authored
Switch to resource-managed function devm_kzalloc instead of kzalloc and remove unneeded kfree Also, remove kfree in probe function and remove function, mv_remove as it is now has nothing to do. The Coccinelle semantic patch used to make this change is as follows: //<smpl> @platform@ identifier p, probefn, removefn; @@ struct platform_driver p = { .probe = probefn, .remove = removefn, }; @prb@ identifier platform.probefn, pdev; expression e, e1, e2; @@ probefn(struct platform_device *pdev, ...) { <+... - e = kzalloc(e1, e2) + e = devm_kzalloc(&pdev->dev, e1, e2) ... ?-kfree(e); ...+> } @rem depends on prb@ identifier platform.removefn; expression prb.e; @@ removefn(...) { <... - kfree(e); ...> } //</smpl> Signed-off-by: Nadim Almas <nadim.902@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Colin Ian King authored
Trivial fix to spelling mistake "pointeur" to "pointer" in dev_err message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Gary R Hook authored
The exponent size in the ccp_op structure is in bits. A v5 CCP requires the exponent size to be in bytes, so convert the size from bits to bytes when populating the descriptor. The current code references the exponent in memory, but these fields have not been set since the exponent is actually store in the LSB. Populate the descriptor with the LSB location (address). Signed-off-by: Gary R Hook <gary.hook@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
- 01 Nov, 2016 2 commits
-
-
Tobias Klauser authored
Remove the unused but set variable tfm in cryptd_enqueue_request to fix the following warning when building with 'W=1': crypto/cryptd.c:125:21: warning: variable 'tfm' set but not used [-Wunused-but-set-variable] Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-
Eric Biggers authored
Since commit 3a01d0ee ("crypto: skcipher - Remove top-level givcipher interface"), crypto_spawn_skcipher2() and crypto_spawn_skcipher() are equivalent. So switch callers of crypto_spawn_skcipher2() to crypto_spawn_skcipher() and remove it. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
-