- 09 Nov, 2020 4 commits
-
-
Thomas Zimmermann authored
Drop the driver's udev field in favor of struct drm_device.dev. No functional changes made. v3: * upcast dev with gm12u320_to_usb_device() v2: * upcast dev with drm_dev_get_usb_device() Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20201103113456.3066-2-tzimmermann@suse.de
-
KuoHsiang Chou authored
[Bug] Change the vertical synchroous polary of 1920x1080 @60Hz from Negtive to Positive Signed-off-by:KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Signed-off-by:
-
Alex Shi authored
Couple of variables are actually useless, remove them to save some gcc warning: drivers/video/fbdev/riva/riva_hw.c:250:21: warning: variable ‘mlwm’ set but not used [-Wunused-but-set-variable] drivers/video/fbdev/riva/riva_hw.c:665:15: warning: variable ‘vraw’ set but not used [-Wunused-but-set-variable] drivers/video/fbdev/riva/riva_hw.c:665:9: warning: variable ‘craw’ set but not used [-Wunused-but-set-variable] drivers/video/fbdev/riva/riva_hw.c:659:73: warning: variable ‘align’ set but not used [-Wunused-but-set-variable] drivers/video/fbdev/riva/riva_hw.c:659:50: warning: variable ‘color_key_enable’ set but not used [-Wunused-but-set-variable] Signed-off-by:
Alex Shi <alex.shi@linux.alibaba.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1604822519-65607-1-git-send-email-alex.shi@linux.alibaba.com
-
Stephen Boyd authored
Reading the EDID of this panel shows that these flags should be set. Set them so that we match what is in the EDID. Cc: Douglas Anderson <dianders@chromium.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Fixes: b0c664cc ("panel: simple: Add BOE NV133FHM-N61") Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
- 08 Nov, 2020 7 commits
-
-
Tom Rix authored
A break is not needed if it is preceded by a return or break Signed-off-by:
Tom Rix <trix@redhat.com> Acked-by:
-
Biju Das authored
dev_err_probe function simplifies error handling. So use the same in probe function wherever possible. Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Biju Das authored
Fix the warning message "missing connector type" by adding connector_type for EDT ETM0700G0DH6 panel. Signed-off-by:
-
Alexandru Gagniuc authored
On the SII9022, the IOVCC and CVCC12 supplies must reach the correct voltage before the reset sequence is initiated. On most boards, this assumption is true at boot-up, so initialization succeeds. However, when we try to initialize the chip with incorrect supply voltages, it will not respond to I2C requests. sii902x_probe() fails with -ENXIO. To resolve this, look for the "iovcc" and "cvcc12" regulators, and make sure they are enabled before starting the reset sequence. If these supplies are not available in devicetree, then they will default to dummy-regulator. In that case everything will work like before. This was observed on a STM32MP157C-DK2 booting in u-boot falcon mode. On this board, the supplies would be set by the second stage bootloader, which does not run in falcon mode. Signed-off-by:
Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by:
-
Alexandru Gagniuc authored
The sii902x chip family requires IO and core voltages to reach the correct voltage before chip initialization. Add binding for describing the two supplies. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Alexandru Gagniuc authored
Separate the hardware initialization code from setting up the data structures and parsing the device tree. The purpose of this change is to provide a single exit point and avoid a waterfall of 'goto's in the subsequent patch. Signed-off-by:
-
Qinglang Miao authored
Add the missing platform_driver_unregister() before return from panel_simple_init in the error handling case when failed to register panel_simple_dsi_driver with CONFIG_DRM_MIPI_DSI enabled. Signed-off-by:
Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by:
-
- 07 Nov, 2020 7 commits
-
-
Michael Tretter authored
In commit 05193dc3 ("drm/bridge: Make the bridge chain a double-linked list") the bridge has been removed and replaced by a private field. Remove the leftover documentation of the removed field. Signed-off-by:
Michael Tretter <m.tretter@pengutronix.de> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Stephen Boyd authored
We should be setting the drm_dp_aux_msg::reply field if a NACK or a SHORT reply happens. Update the error bit handling logic in ti_sn_aux_transfer() to handle these cases and notify upper layers that such errors have happened. This helps the retry logic understand that a timeout has happened, or to shorten the read length if the panel isn't able to handle the longest read possible. Note: I don't have any hardware that exhibits these code paths so this is written based on reading the datasheet for this bridge and inspecting the code and how this is called. Changes in v2: - Move WRITE_STATUS_UPDATE check from case to assignment Changes in v2: - Handle WRITE_STATUS_UPDATE properly Reviewed-by:
-
Stephen Boyd authored
Use the DDC connection to read the EDID from the eDP panel instead of relying on the panel to tell us the modes. Reviewed-by:
-
Stephen Boyd authored
There's no reason we need to wait here to poll a register over i2c. The i2c bus is inherently slow and delays are practically part of the protocol because we have to wait for the device to respond to any request for a register. Let's rely on the sleeping of the i2c controller instead of adding any sort of delay here in the bridge driver. Reviewed-by:
-
Stephen Boyd authored
These register reads and writes are sometimes directly next to each other in the register address space. Let's use regmap bulk read/write APIs to get the data with one transfer instead of multiple i2c transfers. This helps cut down on the number of transfers in the case of something like reading an EDID where we read in blocks of 16 bytes at a time and the last for loop here is sending an i2c transfer for each of those 16 bytes, one at a time. Ouch! Changes in v3: - Undid changes in v2 Changes in v2: - Combined AUX_CMD register write Reviewed-by:
-
Dmitry Baryshkov authored
Add support for Lontium LT9611UXC HDMI bridge. Lontium LT9611UXC is a DSI to HDMI bridge which supports two DSI ports and I2S port as an input and HDMI port as output. Despite name being similar to LT9611, these devices are different enough to warrant separate driver. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by:
-
Dmitry Baryshkov authored
Lontium LT9611UXC is a DSI to HDMI bridge which supports 2 DSI ports and I2S port as input and one HDMI port as output. The LT9611UXC chip is handled by a separate driver, but the bindings used are fully compatible with the LT9611 chip, so let's reuse the lt9611.yaml schema. Signed-off-by:
Vinod Koul <vkoul@kernel.org> Acked-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
- 06 Nov, 2020 13 commits
-
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/mga/mga_state.c: In function ‘mga_dma_iload’: drivers/gpu/drm/mga/mga_state.c:945:22: warning: variable ‘buf_priv’ set but not used [-Wunused-but-set-variable] Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: by <jhartmann@precisioninsight.com> Cc: Jeff Hartmann <jhartmann@valinux.com> Cc: Keith Whitwell <keith@tungstengraphics.com> Cc: Gareth Hughes <gareth@valinux.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/mga/mga_dma.c:29: warning: Cannot understand * file mga_dma.c drivers/gpu/drm/mga/mga_dma.c:455: warning: Function parameter or member 'dev' not described in 'mga_do_agp_dma_bootstrap' drivers/gpu/drm/mga/mga_dma.c:455: warning: Function parameter or member 'dma_bs' not described in 'mga_do_agp_dma_bootstrap' drivers/gpu/drm/mga/mga_dma.c:629: warning: Function parameter or member 'dev' not described in 'mga_do_pci_dma_bootstrap' drivers/gpu/drm/mga/mga_dma.c:629: warning: Function parameter or member 'dma_bs' not described in 'mga_do_pci_dma_bootstrap' drivers/gpu/drm/mga/mga_dma.c:1150: warning: Function parameter or member 'dev' not described in 'mga_driver_unload' drivers/gpu/drm/mga/mga_dma.c:1159: warning: Function parameter or member 'dev' not described in 'mga_driver_lastclose' Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: by <jhartmann@precisioninsight.com> Cc: Faith <faith@valinux.com> Cc: Jeff Hartmann <jhartmann@valinux.com> Cc: Keith Whitwell <keith@tungstengraphics.com> Cc: Gareth Hughes <gareth@valinux.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/r128/ati_pcigart.c:2: warning: Cannot understand * file ati_pcigart.c Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Gareth Hughes <gareth@valinux.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lyude Paul authored
Noticed this when trying to compile with -Wall on a kernel fork. We potentially don't set width here, which causes the compiler to complain about width potentially being uninitialized in drm_cvt_modes(). So, let's fix that. Changes since v1: * Don't emit an error as this code isn't reachable, just mark it as such Changes since v2: * Remove now unused variable Fixes: 3f649ab7 ("treewide: Remove uninitialized_var() usage") Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Ilia Mirkin <imirkin@alum.mit.edu> Link: https://patchwork.freedesktop.org/patch/msgid/20201105235703.1328115-1-lyude@redhat.com
-
Deepak R Varma authored
idr_init() uses base 0 which is an invalid identifier for this driver. The idr_alloc for this driver uses VC4_PERFMONID_MIN as start value for ID range and it is #defined to 1. The new function idr_init_base allows IDR to set the ID lookup from base 1. This avoids all lookups that otherwise starts from 0 since 0 is always unused / available. References: commit 6ce711f2 ("idr: Make 1-based IDRs more efficient") Signed-off-by:
Deepak R Varma <mh12gx2825@gmail.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20201105202135.GA145111@localhost
-
Luben Tuikov authored
Make the definition of struct drm_driver a constant, to follow the latest developments in the DRM layer. Signed-off-by:
Luben Tuikov <luben.tuikov@amd.com> [danvet: Rebase onto devm_drm_dev_alloc patch and drop the freesync ioctl line again that escaped from internal trees.] Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Daniel Vetter authored
Only the following drivers aren't converted: - amdgpu, because of the driver_feature mangling due to virt support. Subsequent patch will address this. - nouveau, because DRIVER_ATOMIC uapi is still not the default on the platforms where it's supported (i.e. again driver_feature mangling) - vc4, again because of driver_feature mangling - qxl, because the ioctl table is somewhere else and moving that is maybe a bit too much, hence the num_ioctls assignment prevents a const driver structure. - arcpgu, because that is stuck behind a pending tiny-fication series from me. - legacy drivers, because legacy requires non-const drm_driver. Note that for armada I also went ahead and made the ioctl array const. Only cc'ing the driver people who've not been converted (everyone else is way too much). v2: Fix one misplaced const static, should be static const (0day) v3: - Improve commit message (Sam) Acked-by:
Maxime Ripard <mripard@kernel.org> Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201104100425.1922351-5-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
It's nice if a big function/ioctl table like this is const. Only downside here is that we need a few more #ifdef to paper over the differences when CONFIG_DRM_LEGACY is enabled. Maybe provides more motivation to sunset that horror show :-) v2: - Fix super important checkpatch warning (Sam) - Update the kerneldoc example too (Sam) Acked-by:
-
Alex Deucher authored
Use the per device drm driver feature flags rather than the global one. This way we can make the drm driver struct const. Signed-off-by:
-
Daniel Vetter authored
This means some very few #ifdef in code, but it allows us to enlist the compiler to make sure this stuff isn't used anymore. More important, only legacy drivers change drm_device (for the legacy_dev_list shadow attach management), therefore this is prep to allow modern drivers to have a const driver struct. Which is nice, because there's a ton of function pointers in there. Acked-by:
-
Daniel Vetter authored
With only the kms driver left, we can fold this in. This means we need to move the ioctl table, which means one additional ioctl must be defined in headers. Also there's a conflict between the radeon_init macro and the module init function, so rename the module functions to avoid that. Reviewed-by:
-
Deepak R Varma authored
idr_init() uses base 0 which is an invalid identifier for this driver. The idr_alloc for this driver uses 1 as start value for ID range. The new function idr_init_base allows IDR to set the ID lookup from base 1. This avoids all lookups that otherwise starts from 0 since 0 is always unused / available. References: commit 6ce711f2 ("idr: Make 1-based IDRs more efficient") Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
Dan Carpenter authored
This is freed both here and in the caller (virtio_gpu_vram_map()) so it's a double free. The correct place is only in the caller. Fixes: 16845c5d ("drm/virtio: implement blob resources: implement vram object") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20201030114808.GD3251003@mwandaSigned-off-by:
-
- 05 Nov, 2020 9 commits
-
-
Lee Jones authored
gpu: drm: bridge: analogix: analogix_dp_reg: Remove unused function 'analogix_dp_write_byte_to_dpcd' Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c:571:5: warning: no previous prototype for ‘analogix_dp_write_byte_to_dpcd’ [-Wmissing-prototypes] Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Jonas Karlman <jonas@kwiboo.se> Cc: Jernej Skrabec <jernej.skrabec@siol.net> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jason Yan <yanaijie@huawei.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Jingoo Han <jg1.han@samsung.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_SRGB_THROUGH' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_SRGB_ALIGNED' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_SRGB_DUMMY_320X240' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_SRGB_DUMMY_360X240' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_DISABLED_1' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_PRGB_THROUGH' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_PRGB_ALIGNED' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_YUV_640X320_YCBCR' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_YUV_720X360_YCBCR' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_DISABLED_2' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_ITU_R_BT656_720X360_YCBCR' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_ITU_R_BT656_640X320_YCBCR' not described in enum 'ili9322_input' drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_UNKNOWN' not described in enum 'ili9322_input' Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Lee Jones authored
Struct headers should start with 'struct <name>' Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/panel/panel-simple.c:42: warning: Cannot understand * @modes: Pointer to array of fixed modes appropriate for this panel. If Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Lee Jones authored
Fixes the following W=1 kernel build warning(s): drivers/gpu/host1x/bus.c:40: warning: Function parameter or member 'driver' not described in 'host1x_subdev_add' Cc: Thierry Reding <thierry.reding@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-tegra@vger.kernel.org Signed-off-by:
-
YueHaibing authored
gpiod_to_irq() return negative value in case of error, the existing code doesn't handle negative error codes. If the HPD gpio supports IRQs (gpiod_to_irq returns a valid number), we use the IRQ. If it doesn't (gpiod_to_irq returns an error), it gets polled via detect(). Fixes: cff5e6f7 ("drm/bridge: Add driver for the TI TPD12S015 HDMI level shifter") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
-
Anitha Chrisanthus authored
v2: Added Maintainer entry v3: Added one more Maintainer entry v3: drop videomode_helpers Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Anitha Chrisanthus <anitha.chrisanthus@intel.com> Reviewed-by:
-
Anitha Chrisanthus authored
Initializes Mipi DSI and sets up connects to ADV bridge v2: removed license text upclassed dev_private, removed HAVE_IRQ. (Sam) v3: Squashed all 59 commits to one v4: review changes from Sam Ravnborg renamed dev_p to kmb v5: corrected spellings v6: corrected checkpatch warnings v7: review changes Sam Ravnborg and Thomas Zimmerman removed unnecessary logs and defines and ifdef codes (Sam) split dphy_init_sequence smaller (Sam) removed redundant checks in kmb_dsi (Sam) changed kmb_dsi_init to drm_bridge_connector_init and drm_connector_attach_encoder to bridge's connector (Sam) v8: call drm_bridge_attach with DRM_BRIDGE_ATTACH_NO_CONNECTOR v9: renamed kmb_dsi_hw_init to kmb_dsi_mode_set (Daniel V) v10: changes in driver to accommodate changes in DT to separate DSI entries (Sam R) added comments to clarify empty dsi host functions review changes from Sam to separate out DSI part, removed dependencies on drm side (Sam R) v11: review changes for separate msscam node (Sam R, Neil A) v12: fixed warnings Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: -
Anitha Chrisanthus authored
This is a basic KMS atomic modesetting display driver for KeemBay family of SOCs. Driver has no 2D or 3D graphics. It calls into the ADV bridge driver at the connector level. Single CRTC with LCD controller->mipi DSI->ADV bridge Only 1080p resolution and single plane is supported at this time. v2: moved extern to .h, removed license text use drm_dev_init, upclassed dev_private, removed HAVE_IRQ.(Sam) v3: Squashed all 59 commits to one v4: review changes from Sam Ravnborg renamed dev_p to kmb moved clocks under kmb_clock, consolidated clk initializations use drmm functions use DRM_GEM_CMA_DRIVER_OPS_VMAP v5: corrected spellings v6: corrected checkpatch warnings v7: review changes Sam Ravnborg and Thomas Zimmerman removed kmb_crtc.h kmb_crtc_cleanup (Thomas) renamed mode_set, kmb_load, inlined unload (Thomas) moved remaining logging to drm_*(Thomas) re-orged driver initialization (Thomas) moved plane_status to drm_private (Sam) removed unnecessary logs and defines and ifdef codes (Sam) call helper_check in plane_atomic_check (Sam) renamed set to get for bpp and format functions(Sam) use drm helper functions for reset, duplicate/destroy state instead of kmb functions (Sam) removed kmb_priv from kmb_plane and removed kmb_plane_state (Sam) v8: get clk_pll0 from display node in dt v9: moved csc_coef_lcd to plane.c (Daniel Vetter) call drm_atomic_helper_shutdown in remove (Daniel V) use drm_crtc_handle_vblank (Daniel V) renamed kmb_dsi_hw_init to kmb_dsi_mode_set (Daniel V) complimentary changes to device tree changes (Rob) v10: call drm_crtc_arm_vblank_event in atomic_flush (Daniel V) moved global vars to kmb_private and added locks (Daniel V) changes in driver to accommodate changes in DT to separate DSI entries (Sam R) review changes to separate mipi DSI (Sam R) v11: review changes to separate msscam (Neil A,Sam R) v12: fixed warnings Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: -
Anitha Chrisanthus authored
Register definitions for Keem Bay display driver v2: removed license text (Sam) v3: Squashed all 59 commits to one v4: review changes from Sam Ravnborg renamed dev_p to kmb v5: corrected spellings v6: corrected checkpatch warnings v7: removed redundant definitions v8: removed redundant definitions, clean up (Sam R) Signed-off-by:
-
