- 14 Apr, 2016 12 commits
-
-
Xin Long authored
Now when we change the attributes of bridge or br_port by netlink, a relevant netlink notification will be sent, but if we change them by ioctl or sysfs, no notification will be sent. We should ensure that whenever those attributes change internally or from sysfs/ioctl, that a netlink notification is sent out to listeners. Also, NetworkManager will use this in the future to listen for out-of-band bridge master attribute updates and incorporate them into the runtime configuration. This patch is used for br_sysfs_br. and we also need to remove some rtnl_trylock in old functions so that we can call it in a common one. For group_addr_store, we cannot make it use store_bridge_parm, because it's not a string-to-long convert, we will add notification on it individually. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Xin Long authored
There are some repetitive codes in stp_state_store, we can remove them by calling store_bridge_parm. Signed-off-by:
-
Xin Long authored
There are some repetitive codes in forward_delay_store, we can remove them by calling store_bridge_parm. Signed-off-by:
-
Xin Long authored
There are some repetitive codes in flush_store, we can remove them by calling store_bridge_parm, also, it would send rtnl notification after we add it in store_bridge_parm in the following patches. Signed-off-by:
-
Denys Vlasenko authored
Sometimes gcc mysteriously doesn't inline very small functions we expect to be inlined. See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66122 Arguably, gcc should do better, but gcc people aren't willing to invest time into it, asking to use __always_inline instead. With this .config: http://busybox.net/~vda/kernel_config_OPTIMIZE_INLINING_and_Os, the following functions get deinlined many times. netif_tx_stop_queue: 207 copies, 590 calls: 55 push %rbp 48 89 e5 mov %rsp,%rbp f0 80 8f e0 01 00 00 01 lock orb $0x1,0x1e0(%rdi) 5d pop %rbp c3 retq netif_tx_start_queue: 47 copies, 111 calls 55 push %rbp 48 89 e5 mov %rsp,%rbp f0 80 a7 e0 01 00 00 fe lock andb $0xfe,0x1e0(%rdi) 5d pop %rbp c3 retq sock_hold: 39 copies, 124 calls 55 push %rbp 48 89 e5 mov %rsp,%rbp f0 ff 87 80 00 00 00 lock incl 0x80(%rdi) 5d pop %rbp c3 retq __sock_put: 6 copies, 13 calls 55 push %rbp 48 89 e5 mov %rsp,%rbp f0 ff 8f 80 00 00 00 lock decl 0x80(%rdi) 5d pop %rbp c3 retq This patch fixes this via s/inline/__always_inline/. Code size decrease after the patch is ~2.5k: text data bss dec hex filename 56719876 56364551 36196352 149280779 8e5d80b vmlinux_before 56717440 56364551 36196352 149278343 8e5ce87 vmlinux Signed-off-by:Denys Vlasenko <dvlasenk@redhat.com> CC: David S. Miller <davem@davemloft.net> CC: linux-kernel@vger.kernel.org CC: netdev@vger.kernel.org CC: netfilter-devel@vger.kernel.org Signed-off-by:
-
Masanari Iida authored
This patch fix typos in Documentation/networking/dsa. Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Daniel Borkmann authored
The original tokenized iid support implemented via f53adae4 ("net: ipv6: add tokenized interface identifier support") didn't allow for clearing a device token as it was intended that this addressing mode was the only one active for globally scoped IPv6 addresses. Later we relaxed that restriction via 617fe29d ("net: ipv6: only invalidate previously tokenized addresses"), and we should also allow for clearing tokens as there's no good reason why it shouldn't be allowed. Fixes: 617fe29d ("net: ipv6: only invalidate previously tokenized addresses") Reported-by:
Robin H. Johnson <robbat2@gentoo.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Hannes Frederic Sowa authored
sock_owned_by_user should not be used without socket lock held. It seems to be a common practice to check .owned before lock reclassification, so provide a little help to abstract this check away. Cc: linux-cifs@vger.kernel.org Cc: linux-bluetooth@vger.kernel.org Cc: linux-nfs@vger.kernel.org Signed-off-by:
-
Alexandre TORGUE authored
On GMAC4.xx each descriptor contains 2 buffers of 16KB (each). Initially, those 2 buffers was filled in dwmac4_rd_prepare_tx_desc but it is actually not needed. Indeed, stmmac driver supports frame up to 9000 bytes (jumbo). So only one buffer is needed. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by:
-
David S. Miller authored
Willem de Bruijn says: ==================== fix two more udp pull header issues Follow up patches to the fixes to RxRPC and SunRPC. A scan of the code showed two other interfaces that expect UDP packets to have a udphdr when queued: read packet length with ioctl SIOCINQ and receive payload checksum with socket option IP_CHECKSUM. ==================== Signed-off-by: -
Willem de Bruijn authored
On udp sockets, recv cmsg IP_CMSG_CHECKSUM returns a checksum over the packet payload. Since commit e6afc8ac pulled the headers, taking skb->data as the start of transport header is incorrect. Use the transport header pointer. Also, when peeking at an offset from the start of the packet, only return a checksum from the start of the peeked data. Note that the cmsg does not subtract a tail checkum when reading truncated data. Fixes: e6afc8ac ("udp: remove headers from UDP packets before queueing") Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Willem de Bruijn authored
On udp sockets, ioctl SIOCINQ returns the payload size of the first packet. Since commit e6afc8ac pulled the headers, the result is incorrect when subtracting header length. Remove that operation. Fixes: e6afc8ac ("udp: remove headers from UDP packets before queueing") Signed-off-by:
-
- 13 Apr, 2016 20 commits
-
-
David S. Miller authored
Andrew Lunn says: ==================== DSA refactoring: set 1 There has been a long running effort to refractor DSA probing to make the switches true linux devices. Here are a small collection of patches moving in this direction. Most have been seen before. We take a little step forward by passing the dsa device point to the driver, thus allowing it to perform resource allocations using the normal mechanisms. This device structure will later be replaced by the devices own device structure. Future patches will add a true driver probe function, so we rename the current probe function, cleaning up the namespace. phys_port_mask continually confuses me, thinking it is about PHYs. But it is actually about ports enabled to the outside world. So rename it to enabled_port_mask. Lots more patches yet to follow, this is just doing some ground work. v2: enabled_port_mask instread of user_port_masks Added Tested-by's and Reviewed-by. ==================== Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Andrew Lunn authored
mv88e6xxx_lookup_name() returns the model name of a switch at a given address on an MII bus. Using mii_bus to identify the bus rather than the host device is more logical, so change the parameter. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by:
-
Andrew Lunn authored
The phys in phys_port_mask suggests this mask is about PHYs. In fact, it means physical ports. Rename to enabled_port_mask, indicating external enabled ports of the switch, which is hopefully less confusing. Signed-off-by:
-
Andrew Lunn authored
Rename the function called from the DSA to perform a probe for the switch. This makes the normal _probe() name available for a standard Linux device driver probe function. Signed-off-by:
-
Andrew Lunn authored
Rather than looking up the mii bus and address every time, do it once at probe, and keep it in the private structure. Centralise this probe code in mv88e6xxx. Signed-off-by:
-
Andrew Lunn authored
The drivers now allocate their own memory for private usage. Remove the allocation from the core code. Signed-off-by:
-
Andrew Lunn authored
Now the switch devices have a dev pointer, make use of it for allocating the drivers private data structures using a devm_kzalloc(). Signed-off-by:
-
Andrew Lunn authored
By passing a device structure to the switch devices, it allows them to use devm_* methods for resource management. Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2016-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== To synchronize with Kalle, here's just a big change that affects all drivers - removing the duplicated enum ieee80211_band and replacing it by enum nl80211_band. On top of that, just a small documentation update. ==================== Signed-off-by:
-
Jon Paul Maloy authored
We remove a couple of leftover fields in struct tipc_bearer. Those were used by the old broadcast implementation, and are not needed any longer. There is no functional changes in this commit. Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
David S. Miller authored
John Crispin says: ==================== net: mediatek: make the driver pass stress tests While testing the driver we managed to get the TX path to stall and fail to recover. When dual MAC support was added to the driver, the whole queue stop/wake code was not properly adapted. There was also a regression in the locking of the xmit function. The fact that watchdog_timeo was not set and that the tx_timeout code failed to properly reset the dma, irq and queue just made the mess complete. This series make the driver pass stress testing. With this series applied the testbed has been running for several days and still has not locked up. We have a second setup that has a small hack patch applied to randomly stop irqs and/or one of the queues and successfully manages to recover from these simulated tx stalls. ==================== Signed-off-by: -
John Crispin authored
The QID field gets set to the mac id. This made the DMA linked list queue the traffic of each MAC on a different internal queue. However during long term testing we found that this will cause traffic stalls as the multi queue setup requires a more complete initialisation which is not part of the upstream driver yet. This patch removes the code setting the QID field, resulting in all traffic ending up in queue 0 which works without any special setup. Signed-off-by:
John Crispin <blogic@openwrt.org> Signed-off-by:
-
John Crispin authored
The worker always touches both netdevs. It is ethernet core and not MAC specific. We only need one worker, which belongs into the ethernets core struct. Signed-off-by:
-
John Crispin authored
The driver supports 2 MACs. Both run on the same DMA ring. If we hit a TX timeout we need to stop both netdevs before restarting them again. If we don't do this, mtk_stop() wont shutdown DMA and the consecutive call to mtk_open() wont restart DMA and enable IRQs. Signed-off-by:
-
John Crispin authored
Inside the TX path there is a lock inside the tx_map function. This is however too late. The patch moves the lock to the start of the xmit function right before the free count check of the DMA ring happens. If we do not do this, the code becomes racy leading to TX stalls and dropped packets. This happens as there are 2 netdevs running on the same physical DMA ring. Signed-off-by:
-
John Crispin authored
The driver supports 2 MACs. Both run on the same DMA ring. If we go above/below the TX rings threshold value, we always need to wake/stop the queue of both devices. Not doing to can cause TX stalls and packet drops on one of the devices. Signed-off-by:
-
John Crispin authored
HW reset is triggered in the mtk_hw_init() function. There is no need to also reset the core during probe. Signed-off-by:
-
John Crispin authored
The code used to also support the PDMA engine, which had 2 packet pointers per descriptor. Because of this we had to divide the result by 2 and round it up. This is no longer needed as the code only supports QDMA. Signed-off-by:
-
John Crispin authored
The original commit failed to set watchdog_timeo. This patch sets watchdog_timeo to HZ. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains the first batch of Netfilter updates for your net-next tree. 1) Define pr_fmt() in nf_conntrack, from Weongyo Jeong. 2) Define and register netfilter's afinfo for the bridge family, this comes in preparation for native nfqueue's bridge for nft, from Stephane Bryant. 3) Add new attributes to store layer 2 and VLAN headers to nfqueue, also from Stephane Bryant. 4) Parse new NFQA_VLAN and NFQA_L2HDR nfqueue netlink attributes coming from userspace, from Stephane Bryant. 5) Use net->ipv6.devconf_all->hop_limit instead of hardcoded hop_limit in IPv6 SYNPROXY, from Liping Zhang. 6) Remove unnecessary check for dst == NULL in nf_reject_ipv6, from Haishuang Yan. 7) Deinline ctnetlink event report functions, from Florian Westphal. ==================== Signed-off-by:
-
- 12 Apr, 2016 6 commits
-
-
Florian Westphal authored
Not performance critical, it is only invoked when an expectation is added/destroyed. While at it, kill unused nf_ct_expect_event() wrapper. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Florian Westphal authored
Way too large; move it to nf_conntrack_ecache.c. Reduces total object size by 1216 byte on my machine. Signed-off-by:
-
David S. Miller authored
Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2016-04-12 Here's a set of Bluetooth & 802.15.4 patches intended for the 4.7 kernel: - Fix for race condition in vhci driver - Memory leak fix for ieee802154/adf7242 driver - Improvements to deal with single-mode (LE-only) Bluetooth controllers - Fix for allowing the BT_SECURITY_FIPS security level - New BCM2E71 ACPI ID - NULL pointer dereference fix fox hci_ldisc driver Let me know if there are any issues pulling. Thanks. ==================== Signed-off-by:
-
Johannes Berg authored
This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by:Johannes Berg <johannes.berg@intel.com>
-
Jouni Malinen authored
The roaming cases for the Connect command were not fully covered and neither Connect nor Associate command uses of the prev_bssid parameter were very clear. Add details to describe how the prev_bssid argument is supposed to be used and when the driver should use association or reassociation. Signed-off-by:
Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by:
-
Andrew Lunn authored
MDIO devices can be stacked upon each other. The current code supports two levels, which until recently has been enough for a DSA mdio bus on top of another bus. Now we have hardware which has an MDIO mux in the middle. Define an MDIO MUTEX class with three levels. Signed-off-by:
-
- 11 Apr, 2016 2 commits
-
-
David S. Miller authored
David Howells says: ==================== RxRPC: 2nd rewrite part 1 Okay, I'm in the process of rewriting the RxRPC rewrite. The primary aim of this second rewrite is to strictly control the number of active connections we know about and to get rid of connections we don't need much more quickly. On top of this, there are fixes to the protocol handling which will all occur in later parts. Here's the first set of patches from the second go, aimed at net-next. These are all fixes and cleanups preparatory to the main event. Notable parts of this set include: (1) A fix for the AFS filesystem to wait for outstanding calls to complete before closing the RxRPC socket. (2) Differentiation of local and remote abort codes. At a future point userspace will get to see this via control message data on recvmsg(). (3) Absorb the rxkad module into the af_rxrpc module to prevent a dependency loop. (4) Create a null security module and unconditionalise calls into the security module that's in force (there will always be a security module applied to a connection, even if it's just the null one). ==================== Signed-off-by: -
David Howells authored
Create a null security type for security index 0 and get rid of all conditional calls to the security operations. We expect normally to be using security, so this should be of little negative impact. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
