- 14 Mar, 2013 40 commits
-
-
Chris Metcalf authored
commit 5a114b98 upstream. sys_llseek should specify the high and low 32-bit seek values as "unsigned int" but instead it specifies "unsigned long". Since compat syscall arguments are always sign-extended on tile, this means that a seek value of 0xffffffff will be incorrectly interpreted as a value of -1ULL. To avoid the risk of breaking binary compatibility on architectures that already use sys_llseek this way, we follow the same path as MIPS and provide a wrapper override. Signed-off-by:
Chris Metcalf <cmetcalf@tilera.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric W. Biederman authored
commit db04dc67 upstream. Update proc_ns_follow_link to use nd_jump_link instead of just manually updating nd.path.dentry. This fixes the BUG_ON(nd->inode != parent->d_inode) reported by Dave Jones and reproduced trivially with mkdir /proc/self/ns/uts/a. Sigh it looks like the VFS change to require use of nd_jump_link happend while proc_ns_follow_link was baking and since the common case of proc_ns_follow_link continued to work without problems the need for making this change was overlooked. Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Linus Torvalds authored
commit 7b54c165 upstream. It's "normal" - it can happen if the file descriptor you followed was opened with O_NOFOLLOW. Reported-by:
Dave Jones <davej@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Takashi Iwai authored
commit 2069d483 upstream. When a value of a vmaster slave control is changed, the ctl change notification is sometimes ignored. This happens when the master control overrides, e.g. when the corresponding master control is muted. The reason is that slave_put() returns the value of the actual slave put callback, and it doesn't reflect the virtual slave value change. This patch fixes the function just to return 1 whenever a slave value is changed. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Sean Connor authored
commit 69a4cfdd upstream. Set card->private_data in snd_ice1712_create for fixing NULL dereference in snd_ice1712_remove(). Signed-off-by:
Sean Connor <sconnor004@allyinics.org> Signed-off-by:
-
Ben Hutchings authored
commit a40e7cf8 upstream. Commit 9f9c9cbb ("drivers/firmware/dmi_scan.c: fetch dmi version from SMBIOS if it exists") hoisted the check for "_DMI_" into dmi_scan_machine(), which means that we don't bother to check for "_DMI_" at offset 16 in an SMBIOS entry. smbios_present() may also call dmi_present() for an address where we found "_SM_", if it failed further validation. Check for "_DMI_" in smbios_present() before calling dmi_present(). [akpm@linux-foundation.org: fix build] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Reported-by:
Tim McGrath <tmhikaru@gmail.com> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Peter Hurley authored
commit 88b9e456 upstream. When MSG_COPY is set, a duplicate message must be allocated for the copy before locking the queue. However, the copy could not be larger than was sent which is limited to msg_ctlmax. Signed-off-by:
Peter Hurley <peter@hurleysoftware.com> Acked-by:
Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by:
-
Peter Hurley authored
commit e1082f45 upstream. If the src msg is > 4k, then dest->next points to the next allocated segment; resetting it just prior to dereferencing is bad. Signed-off-by:
-
Patrik Jakobsson authored
commit f40ebd6b upstream. According to PRM we need to disable hsync and vsync even though ADPA is disabled. The previous code did infact do the opposite so we fix it. Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=56359Tested-by:
max <manikulin@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
commit 15239099 upstream. We need it to restore the ilk rc6 context, since the gpu wait no requires interrupts. But in general having interrupts around should help in code sanity, since more and more stuff is interrupt driven. This regression has been introduced in commit 3e960501 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Nov 27 16:22:54 2012 +0000 drm/i915: Rearrange code to only have a single method for waiting upon the ring Like in the driver load code we need to make sure that hotplug interrupts don't cause havoc with our modeset state, hence block them with the existing infrastructure. Again we ignore races where we might loose hotplug interrupts ... Note that the driver load part of the regression has already been fixed in commit 52d7eced Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Sat Dec 1 21:03:22 2012 +0100 drm/i915: reorder setup sequence to have irqs for output setup v2: Add a note to the commit message about which patch fixed the driver load part of the regression. Stable kernels need to backport both patches. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=54691 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reported-and-Tested-by:
Ilya Tumaykin <itumaykin@gmail.com> Reviewed-by: Chris wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by:
-
Daniel Vetter authored
commit 52d7eced upstream. Otherwise the new&shiny irq-driven gmbus and dp aux code won't work that well. Noticed since the dp aux code doesn't have an automatic fallback with a timeout (since the hw provides for that already). v2: Simple move drm_irq_install before intel_modeset_gem_init, as suggested by Ben Widawsky. v3: Now that interrupts are enabled before all connectors are fully set up, we might fall over serving a HPD interrupt while things are still being set up. Instead of jumping through massive hoops and complicating the code with a separate hpd irq enable step, simply block out the hotplug work item from doing anything until things are in place. v4: Actually, we can enable hotplug processing only after the fbdev is fully set up, since we call down into the fbdev from the hotplug work functions. So stick the hpd enabling right next to the poll helper initialization. v5: We need to enable irqs before intel_modeset_init, since that function sets up the outputs. v6: Fixup cleanup sequence, too. Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Kenneth Graunke authored
commit 86c268ed upstream. The second digit was off by one, which meant we accidentally treated GT(n) as GT(n-1). This also meant no support for GT1 at all. Signed-off-by:
Kenneth Graunke <kenneth@whitecape.org> Signed-off-by:
-
Stéphane Marchesin authored
commit 0920a487 upstream. This increases GEN6_RC6p_THRESHOLD from 100000 to 150000. For some reason this avoids the gen6_gt_check_fifodbg.isra warnings and associated GPU lockups, which makes my ivy bridge machine stable. Signed-off-by:
Stéphane Marchesin <marcheu@chromium.org> Acked-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by:
-
Will Deacon authored
commit f2fe09b0 upstream. Masked out PMXEVTYPER.NSH means that we can't enable profiling at PL2, regardless of the settings in the HDCR. This patch fixes the broken mask. Reported-by:
Christoffer Dall <cdall@cs.columbia.edu> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Will Deacon authored
commit 8a4e3a9e upstream. mm->context.id is updated under asid_lock when a new ASID is allocated to an mm_struct. However, it is also read without the lock when a task is being scheduled and checking whether or not the current ASID generation is up-to-date. If two threads of the same process are being scheduled in parallel and the bottom bits of the generation in their mm->context.id match the current generation (that is, the mm_struct has not been used for ~2^24 rollovers) then the non-atomic, lockless access to mm->context.id may yield the incorrect ASID. This patch fixes this issue by making mm->context.id and atomic64_t, ensuring that the generation is always read consistently. For code that only requires access to the ASID bits (e.g. TLB flushing by mm), then the value is accessed directly, which GCC converts to an ldrb. Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Will Deacon authored
commit 37f47e3d upstream. If a thread triggers an ASID rollover, other threads of the same process must be made to wait until the mm->context.id for the shared mm_struct has been updated to new generation and associated book-keeping (e.g. TLB invalidation) has ben performed. However, there is a *tiny* window where both mm->context.id and the relevant active_asids entry are updated to the new generation, but the TLB flush has not been performed, which could allow another thread to return to userspace with a dirty TLB, potentially leading to data corruption. In reality this will never occur because one CPU would need to perform a context-switch in the time it takes another to do a couple of atomic test/set operations but we should plug the race anyway. This patch moves the active_asids update until after the potential TLB flush on context-switch. Reviewed-by:
-
Will Deacon authored
commit d61947a1 upstream. The LPAE page table format uses 64-bit descriptors, so we need to take endianness into account when populating the swapper and idmap tables during early initialisation. This patch ensures that we store the two words making up each page table entry in the correct order when running big-endian. Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Alex Deucher authored
commit e8fc4137 upstream. vbios values are wrong leading to colors that are too bright. Use the default values instead. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit cc9945bf upstream. Avoids splatter if the interrupt handler is not registered due to acceleration being disabled. Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
-
Guenter Roeck authored
commit f366fccd upstream. We read the chip ID from the chip, use it to determine if the chip ID provided to the driver is correct, and report it if wrong. We should also use the correct chip ID to select supported functionality. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Acked-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Guenter Roeck authored
commit dbd712c2 upstream. Peak attributes were not initialized and cleared correctly. Also, temp2_max is only supported on page 0 and thus does not need to be an array. Signed-off-by:
-
Mark Brown authored
commit 3e78080f upstream. Not having power is a pretty serious error so check that we are able to enable the supply and error out if we can't. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
NeilBrown authored
commit ee0b0244 upstream. When raid1/raid10 needs to fix a read error, it first drains all pending requests by calling freeze_array(). This calls flush_pending_writes() if it needs to sleep, but some writes may be pending in a per-process plug rather than in the per-array request queue. When raid1{,0}_unplug() moves the request from the per-process plug to the per-array request queue (from which flush_pending_writes() can flush them), it needs to wake up freeze_array(), or freeze_array() will never flush them and so it will block forever. So add the requires wake_up() calls. This bug was introduced by commit f54a9d0e for raid1 and a similar commit for RAID10, and so has been present since linux-3.6. As the bug causes a deadlock I believe this fix is suitable for -stable. Reported-by:
Tregaron Bayly <tbayly@bluehost.com> Tested-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
commit 58ebb34c upstream. Create_stripe_zones returns an error slightly differently to raid0_run and to raid0_takeover_*. The error returned used by the second was wrong and an error would result in mddev->private being set to NULL and sooner or later a crash. So never return NULL, return ERR_PTR(err), not NULL from create_stripe_zones. This bug has been present since 2.6.35 so the fix is suitable for any kernel since then. Signed-off-by:
-
NeilBrown authored
commit a6468539 upstream. You cannot resize a RAID0 array (in terms of making the devices bigger), but the code doesn't entirely stop you. So: disable setting of the available size on each device for RAID0 and Linear devices. This must not change as doing so can change the effective layout of data. Make sure that the size that raid0_size() reports is accurate, but rounding devices sizes to chunk sizes. As the device sizes cannot change now, this isn't so important, but it is best to be safe. Without this change: mdadm --grow /dev/md0 -z max mdadm --grow /dev/md0 -Z max then read to the end of the array can cause a BUG in a RAID0 array. These bugs have been present ever since it became possible to resize any device, which is a long time. So the fix is suitable for any -stable kerenl. Signed-off-by:
-
Sebastian Riemer authored
commit bbfa57c0 upstream. If an fsync occurs on a read-only array, we need to send a completion for the IO and may not increment the active IO count. Otherwise, we hit a bug trace and can't stop the MD array anymore. By advice of Christoph Hellwig we return success upon a flush request but we return -EROFS for other writes. We detect flush requests by checking if the bio has zero sectors. This patch is suitable to any -stable kernel to which it applies. Signed-off-by:
Sebastian Riemer <sebastian.riemer@profitbricks.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: NeilBrown <neilb@suse.de> Reported-by:
Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by:
-
Frederic Weisbecker authored
commit e5ab012c upstream. As it stands, irq_exit() may or may not be called with irqs disabled, depending on __ARCH_IRQ_EXIT_IRQS_DISABLED that the arch can define. It makes tick_nohz_irq_exit() unsafe. For example two interrupts can race in tick_nohz_stop_sched_tick(): the inner most one computes the expiring time on top of the timer list, then it's interrupted right before reprogramming the clock. The new interrupt enqueues a new timer list timer, it reprogram the clock to take it into account and it exits. The CPUs resumes the inner most interrupt and performs the clock reprogramming without considering the new timer list timer. This regression has been introduced by: 280f0677 ("nohz: Separate out irq exit and idle loop dyntick logic") Let's fix it right now with the appropriate protections. A saner long term solution will be to remove __ARCH_IRQ_EXIT_IRQS_DISABLED and mandate that irq_exit() is called with interrupts disabled. Signed-off-by:
Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linuxfoundation.org> Link: http://lkml.kernel.org/r/1361373336-11337-1-git-send-email-fweisbec@gmail.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Kees Cook authored
commit e70ab977 upstream. While PROC_CN_MCAST_LISTEN/IGNORE is entirely advisory, it was possible for an unprivileged user to turn off notifications for all listeners by sending PROC_CN_MCAST_IGNORE. Instead, require the same privileges as required for a multicast bind. Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Matt Helsley <matthltc@us.ibm.com> Acked-by:
Evgeniy Polyakov <zbr@ioremap.net> Acked-by:
Matt Helsley <matthltc@us.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Felix Fietkau authored
commit 3412f2f0 upstream. On many different chips, important aspects of the MAC state are not fully cleared by a warm reset. This can show up as tx/rx hangs, those annoying "DMA failed to stop in 10 ms..." messages or other quirks. On AR933x, the chip can occasionally get stuck in a way that only a driver unload/reload or a reboot would bring it back to life. With this patch, a full reset is issued when bringing the chip out of FULL-SLEEP state (after idle), or if either Rx or Tx was not shut down properly. This makes the DMA related error messages disappear completely in my tests on AR933x, and the chip does not get stuck anymore. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Felix Fietkau authored
commit 838f4279 upstream. The ath9k commit 2ef16755 (ath9k: fix signal strength reporting issues) fixed an issue where the reported per-frame signal strength reported to mac80211 was being overwritten with an internal average. The same issue is also present in ath9k_htc. In addition to preventing the driver from overwriting the value, this commit also ensures that the internal average (which is used for ANI) only tracks beacons of the AP that we're connected to. Signed-off-by:
-
Felix Fietkau authored
commit a3d63cad upstream. RSSI is being stored internally as s8 in several places. The indication of an unset RSSI value, ATH_RSSI_DUMMY_MARKER, was supposed to have been set to 127, but ended up being set to 0x127 because of a code cleanup mistake. This could lead to invalid signal strength values in a few places. Signed-off-by:
-
Bing Zhao authored
commit 46602698 upstream. For SD8688, FUNC_INIT command is queued before fw_ready flag is set. This causes the following crash as lbs_thread blocks any command if fw_ready is not set. [ 209.338953] [<c0502248>] (__schedule+0x610/0x764) from [<bf20ae24>] (__lbs_cmd+0xb8/0x130 [libertas]) [ 209.348340] [<bf20ae24>] (__lbs_cmd+0xb8/0x130 [libertas]) from [<bf222474>] (if_sdio_finish_power_on+0xec/0x1b0 [libertas_sdio]) [ 209.360136] [<bf222474>] (if_sdio_finish_power_on+0xec/0x1b0 [libertas_sdio]) from [<bf2226c4>] (if_sdio_power_on+0x18c/0x20c [libertas_sdio]) [ 209.373052] [<bf2226c4>] (if_sdio_power_on+0x18c/0x20c [libertas_sdio]) from [<bf222944>] (if_sdio_probe+0x200/0x31c [libertas_sdio]) [ 209.385316] [<bf222944>] (if_sdio_probe+0x200/0x31c [libertas_sdio]) from [<bf01d820>] (sdio_bus_probe+0x94/0xfc [mmc_core]) [ 209.396748] [<bf01d820>] (sdio_bus_probe+0x94/0xfc [mmc_core]) from [<c02e729c>] (driver_probe_device+0x12c/0x348) [ 209.407214] [<c02e729c>] (driver_probe_device+0x12c/0x348) from [<c02e7530>] (__driver_attach+0x78/0x9c) [ 209.416798] [<c02e7530>] (__driver_attach+0x78/0x9c) from [<c02e5658>] (bus_for_each_dev+0x50/0x88) [ 209.425946] [<c02e5658>] (bus_for_each_dev+0x50/0x88) from [<c02e6810>] (bus_add_driver+0x108/0x268) [ 209.435180] [<c02e6810>] (bus_add_driver+0x108/0x268) from [<c02e782c>] (driver_register+0xa4/0x134) [ 209.444426] [<c02e782c>] (driver_register+0xa4/0x134) from [<bf22601c>] (if_sdio_init_module+0x1c/0x3c [libertas_sdio]) [ 209.455339] [<bf22601c>] (if_sdio_init_module+0x1c/0x3c [libertas_sdio]) from [<c00085b8>] (do_one_initcall+0x98/0x174) [ 209.466236] [<c00085b8>] (do_one_initcall+0x98/0x174) from [<c0076504>] (load_module+0x1c5c/0x1f80) [ 209.475390] [<c0076504>] (load_module+0x1c5c/0x1f80) from [<c007692c>] (sys_init_module+0x104/0x128) [ 209.484632] [<c007692c>] (sys_init_module+0x104/0x128) from [<c0008c40>] (ret_fast_syscall+0x0/0x38) Fix it by setting fw_ready flag prior to queuing FUNC_INIT command. Reported-by:
Lubomir Rintel <lkundrak@v3.sk> Tested-by:
Bing Zhao <bzhao@marvell.com> Signed-off-by:
-
Avinash Patil authored
commit 3e7a4ff7 upstream. Maximum delay for waking up card is 50 ms. Because of typo in counter, this delay goes to 500ms. This patch fixes the bug. Signed-off-by:
Avinash Patil <patila@marvell.com> Signed-off-by:
Amitkumar Karwar <akarwar@marvell.com> Signed-off-by:
Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by:
-
Johannes Berg authored
commit 8a964f44 upstream. The FH hardware will always write back to the scratch field in commands, even host commands not just TX commands, which can overwrite parts of the command. This is problematic if the command is re-used (with IWL_HCMD_DFL_NOCOPY) and can cause calibration issues. Address this problem by always putting at least the first 16 bytes into the buffer we also use for the command header and therefore make the DMA engine write back into this. For commands that are smaller than 16 bytes also always map enough memory for the DMA engine to write back to. Reviewed-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Rusty Russell authored
commit f7f154f1 upstream. virtio_rng feeds the randomness buffer handed by the core directly into the scatterlist, since commit bb347d98. However, if CONFIG_HW_RANDOM=m, the static buffer isn't a linear address (at least on most archs). We could fix this in virtio_rng, but it's actually far easier to just do it in the core as virtio_rng would have to allocate a buffer every time (it doesn't know how much the core will want to read). Reported-by:
Aurelien Jarno <aurelien@aurel32.net> Tested-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Weston Andros Adamson authored
commit a47970ff upstream. This fixes an oops where a LAYOUTGET is in still in the rpciod queue, but the requesting processes has been killed. Without this, killing the process does the final pnfs_put_layout_hdr() and sets NFS_I(inode)->layout to NULL while the LAYOUTGET rpc task still references it. Example oops: BUG: unable to handle kernel NULL pointer dereference at 0000000000000080 IP: [<ffffffffa01bd586>] pnfs_choose_layoutget_stateid+0x37/0xef [nfsv4] PGD 7365b067 PUD 7365d067 PMD 0 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC Modules linked in: nfs_layout_nfsv41_files nfsv4 auth_rpcgss nfs lockd sunrpc ipt_MASQUERADE ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat nf_nat_ipv4 nf_nat iptable_mangle ip6table_filter ip6_tables ppdev e1000 i2c_piix4 i2c_core shpchp parport_pc parport crc32c_intel aesni_intel xts aes_x86_64 lrw gf128mul ablk_helper cryptd mptspi scsi_transport_spi mptscsih mptbase floppy autofs4 CPU 0 Pid: 27, comm: kworker/0:1 Not tainted 3.8.0-dros_cthon2013+ #4 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform RIP: 0010:[<ffffffffa01bd586>] [<ffffffffa01bd586>] pnfs_choose_layoutget_stateid+0x37/0xef [nfsv4] RSP: 0018:ffff88007b0c1c88 EFLAGS: 00010246 RAX: ffff88006ed36678 RBX: 0000000000000000 RCX: 0000000ea877e3bc RDX: ffff88007a729da8 RSI: 0000000000000000 RDI: ffff88007a72b958 RBP: ffff88007b0c1ca8 R08: 0000000000000002 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88007a72b958 R13: ffff88007a729da8 R14: 0000000000000000 R15: ffffffffa011077e FS: 0000000000000000(0000) GS:ffff88007f600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000080 CR3: 00000000735f8000 CR4: 00000000001407f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/0:1 (pid: 27, threadinfo ffff88007b0c0000, task ffff88007c2fa0c0) Stack: ffff88006fc05388 ffff88007a72b908 ffff88007b240900 ffff88006fc05388 ffff88007b0c1cd8 ffffffffa01a2170 ffff88007b240900 ffff88007b240900 ffff88007b240970 ffffffffa011077e ffff88007b0c1ce8 ffffffffa0110791 Call Trace: [<ffffffffa01a2170>] nfs4_layoutget_prepare+0x7b/0x92 [nfsv4] [<ffffffffa011077e>] ? __rpc_atrun+0x15/0x15 [sunrpc] [<ffffffffa0110791>] rpc_prepare_task+0x13/0x15 [sunrpc] Reported-by:
Tigran Mkrtchyan <tigran.mkrtchyan@desy.de> Signed-off-by:
Weston Andros Adamson <dros@netapp.com> Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Benny Halevy authored
commit 78f33277 upstream. Pass the directio request on pageio_init to clean up the API. Percolate pg_dreq from original nfs_pageio_descriptor to the pnfs_{read,write}_done_resend_to_mds and use it on respective call to nfs_pageio_init_{read,write} on the newly created nfs_pageio_descriptor. Reproduced by command: mount -o vers=4.1 server:/ /mnt dd bs=128k count=8 if=/dev/zero of=/mnt/dd.out oflag=direct BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 IP: [<ffffffffa021a3a8>] atomic_inc+0x4/0x9 [nfs] PGD 34786067 PUD 34794067 PMD 0 Oops: 0002 [#1] SMP Modules linked in: nfs_layout_nfsv41_files nfsv4 nfs nfsd lockd nfs_acl auth_rpcgss exportfs sunrpc btrfs zlib_deflate libcrc32c ipv6 autofs4 CPU 1 Pid: 259, comm: kworker/1:2 Not tainted 3.8.0-rc6 #2 Bochs Bochs RIP: 0010:[<ffffffffa021a3a8>] [<ffffffffa021a3a8>] atomic_inc+0x4/0x9 [nfs] RSP: 0018:ffff880038f8fa68 EFLAGS: 00010206 RAX: ffffffffa021a6a9 RBX: ffff880038f8fb48 RCX: 00000000000a0000 RDX: ffffffffa021e616 RSI: ffff8800385e9a40 RDI: 0000000000000028 RBP: ffff880038f8fa68 R08: ffffffff81ad6720 R09: ffff8800385e9510 R10: ffffffffa0228450 R11: ffff880038e87418 R12: ffff8800385e9a40 R13: ffff8800385e9a70 R14: ffff880038f8fb38 R15: ffffffffa0148878 FS: 0000000000000000(0000) GS:ffff88003e400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000028 CR3: 0000000034789000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/1:2 (pid: 259, threadinfo ffff880038f8e000, task ffff880038302480) Stack: ffff880038f8fa78 ffffffffa021a6bf ffff880038f8fa88 ffffffffa021bb82 ffff880038f8fae8 ffffffffa021f454 ffff880038f8fae8 ffffffff8109689d ffff880038f8fab8 ffffffff00000006 0000000000000000 ffff880038f8fb48 Call Trace: [<ffffffffa021a6bf>] nfs_direct_pgio_init+0x16/0x18 [nfs] [<ffffffffa021bb82>] nfs_pgheader_init+0x6a/0x6c [nfs] [<ffffffffa021f454>] nfs_generic_pg_writepages+0x51/0xf8 [nfs] [<ffffffff8109689d>] ? mark_held_locks+0x71/0x99 [<ffffffffa0148878>] ? rpc_release_resources_task+0x37/0x37 [sunrpc] [<ffffffffa021bc25>] nfs_pageio_doio+0x1a/0x43 [nfs] [<ffffffffa021be7c>] nfs_pageio_complete+0x16/0x2c [nfs] [<ffffffffa02608be>] pnfs_write_done_resend_to_mds+0x95/0xc5 [nfsv4] [<ffffffffa0148878>] ? rpc_release_resources_task+0x37/0x37 [sunrpc] [<ffffffffa028e27f>] filelayout_reset_write+0x8c/0x99 [nfs_layout_nfsv41_files] [<ffffffffa028e5f9>] filelayout_write_done_cb+0x4d/0xc1 [nfs_layout_nfsv41_files] [<ffffffffa024587a>] nfs4_write_done+0x36/0x49 [nfsv4] [<ffffffffa021f996>] nfs_writeback_done+0x53/0x1cc [nfs] [<ffffffffa021fb1d>] nfs_writeback_done_common+0xe/0x10 [nfs] [<ffffffffa028e03d>] filelayout_write_call_done+0x28/0x2a [nfs_layout_nfsv41_files] [<ffffffffa01488a1>] rpc_exit_task+0x29/0x87 [sunrpc] [<ffffffffa014a0c9>] __rpc_execute+0x11d/0x3cc [sunrpc] [<ffffffff810969dc>] ? trace_hardirqs_on_caller+0x117/0x173 [<ffffffffa014a39f>] rpc_async_schedule+0x27/0x32 [sunrpc] [<ffffffffa014a378>] ? __rpc_execute+0x3cc/0x3cc [sunrpc] [<ffffffff8105f8c1>] process_one_work+0x226/0x422 [<ffffffff8105f7f4>] ? process_one_work+0x159/0x422 [<ffffffff81094757>] ? lock_acquired+0x210/0x249 [<ffffffffa014a378>] ? __rpc_execute+0x3cc/0x3cc [sunrpc] [<ffffffff810600d8>] worker_thread+0x126/0x1c4 [<ffffffff8105ffb2>] ? manage_workers+0x240/0x240 [<ffffffff81064ef8>] kthread+0xb1/0xb9 [<ffffffff81064e47>] ? __kthread_parkme+0x65/0x65 [<ffffffff815206ec>] ret_from_fork+0x7c/0xb0 [<ffffffff81064e47>] ? __kthread_parkme+0x65/0x65 Code: 00 83 38 02 74 12 48 81 4b 50 00 00 01 00 c7 83 60 07 00 00 01 00 00 00 48 89 df e8 55 fe ff ff 5b 41 5c 5d c3 66 90 55 48 89 e5 <f0> ff 07 5d c3 55 48 89 e5 f0 ff 0f 0f 94 c0 84 c0 0f 95 c0 0f RIP [<ffffffffa021a3a8>] atomic_inc+0x4/0x9 [nfs] RSP <ffff880038f8fa68> CR2: 0000000000000028 Signed-off-by:
Benny Halevy <bhalevy@tonian.com> Signed-off-by:
-
Trond Myklebust authored
commit a9a6b52e upstream. If the socket is full, we're better off just waiting until it empties, or until the connection is broken. The reason why we generally don't want to time out is that the call to xprt->ops->release_xprt() will trigger a connection reset, which isn't helpful... Let's make an exception for soft RPC calls, since they have to provide timeout guarantees. Signed-off-by:
-
Trond Myklebust authored
commit 5a7a613a upstream. Commit 73ca1001 broke the code that prevents the client from deleting a silly renamed dentry. This affected "delete on last close" semantics as after that commit, nothing prevented removal of silly-renamed files. As a result, a process holding a file open could easily get an ESTALE on the file in a directory where some other process issued 'rm -rf some_dir_containing_the_file' twice. Before the commit, any attempt at unlinking silly renamed files would fail inside may_delete() with -EBUSY because of the DCACHE_NFSFS_RENAMED flag. The following testcase demonstrates the problem: tail -f /nfsmnt/dir/file & rm -rf /nfsmnt/dir rm -rf /nfsmnt/dir # second removal does not fail, 'tail' process receives ESTALE The problem with the above commit is that it unhashes the old and new dentries from the lookup path, even in the normal case when a signal is not encountered and it would have been safe to call d_move. Unfortunately the old dentry has the special DCACHE_NFSFS_RENAMED flag set on it. Unhashing has the side-effect that future lookups call d_alloc(), allocating a new dentry without the special flag for any silly-renamed files. As a result, subsequent calls to unlink silly renamed files do not fail but allow the removal to go through. This will result in ESTALE errors for any other process doing operations on the file. To fix this, go back to using d_move on success. For the signal case, it's unclear what we may safely do beyond d_drop. Reported-by:
Dave Wysochanski <dwysocha@redhat.com> Signed-off-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
commit 23cb2109 upstream. Add module aliases so that autoloading works correctly if the user tries to activate "snapshot-origin" or "snapshot-merge" targets. Reference: https://bugzilla.redhat.com/889973Reported-by:
Chao Yang <chyang@redhat.com> Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Alasdair G Kergon <agk@redhat.com> Signed-off-by:
-
