Merge sparc bug fixes that didn't make it into v3.9 into
sparc-next.
Signed-off-by: David S. Miller <davem@davemloft.net>

We have registered platform driver when module init, and
need unregister it when module exit.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is needed because when scan_of_devices finds the GAISLER_GPTIMER
core that corresponds to the SMP "ticker" timer, the previously set
proper irq flow handler gets overwritten with an incorrect one. This
leads to very flaky timer interrupt handling on some hardware. Proper
updates to handlers can still be done using leon_update_virq_handling.
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The vio_remove() function uses device_find_child() but it does not drop
the reference of the retrieved child.
Signed-off-by: Federico Vaga <federico.vaga@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull ARM SoC board specific changes (part 1) from Olof Johansson:
 "These changes are all for board specific files.  These used to make up
  a large portion of the ARM changes in the past, but as we are
  generalizing the support and moving to device tree probing, this has
  gotten significantly smaller.

  The only platform actually adding new code here at the moment is
  Renesas shmobile, as they are still busy converting their code to
  device tree and have not come far enough to not need it."

* tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (43 commits)
  ARM: msm: USB_MSM_OTG needs USB_PHY
  ARM: davinci: da850 evm: fix const qualifier placement
  ARM: davinci: da850 board: add remoteproc support
  ARM: pxa: move debug uart code
  ARM: pxa: select PXA935 on saar & tavorevb
  ARM: mmp: add more compatible names in gpio driver
  ARM: pxa: move PXA_GPIO_TO_IRQ macro
  ARM: pxa: remove cpu_is_xxx in gpio driver
  ARM: Kirkwood: update Network Space Mini v2 description
  ARM: Kirkwood: DT board setup for CloudBox
  ARM: Kirkwood: sort board entries by ASCII-code order
  ARM: OMAP: board-4430sdp: Provide regulator to pwm-backlight
  ARM: OMAP: zoom: Use pwm stack for lcd and keyboard backlight
  ARM: OMAP2+: omap2plus_defconfig: Add support for BMP085 pressure sensor
  omap2+: Remove useless Makefile line
  omap2+: Remove useless Makefile line
  ARM: OMAP: RX-51: add missing regulator supply definitions for lis3lv02d
  ARM: OMAP1: fix omap_udc registration
  ARM: davinci: use is IS_ENABLED macro
  ARM: kirkwood: add MACH_GURUPLUG_DT to defconfig
  ...

Pull ARM platform specific firmware interfaces from Olof Johansson:
 "Two platforms, bcm and exynos have their own firmware interfaces using
  the "secure monitor call", this adds support for those.

  We had originally planned to have a third set of patches in here,
  which would extend support for the existing generic "psci" call that
  is used on multiple platforms as well as Xen and KVM guests, but that
  ended up getting dropped because the patches were not ready in time."

* tag 'firmware-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: bcm: mark bcm_kona_smc_init as __init
  ARM: bcm281xx: Add DT support for SMC handler
  ARM: bcm281xx: Add L2 cache enable code
  ARM: EXYNOS: Add secure firmware support to secondary CPU bring-up
  ARM: EXYNOS: Add IO mapping for non-secure SYSRAM.
  ARM: EXYNOS: Add support for Exynos secure firmware
  ARM: EXYNOS: Add support for secure monitor calls
  ARM: Add interface for registering and calling firmware-specific operations

Pull ARM SoC pinctrl changes for Renesas from Olof Johansson:
 "This is yet another driver change, which is split out just because of
  its size.  As already in 3.9, a lot of changes are going on here, as
  the shmobile platform gets converted from its own pin control API to
  the generic drivers/pinctrl subsystem.

  Based on agreements with Paul Mundt, we are merging the sh-arch-side
  changes here as well"

* tag 'renesas-pinctrl-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (142 commits)
  ARM: shmobile: r8a7779: Remove INTC function GPIOs
  ARM: shmobile: r8a7779: Remove LBSC function GPIOs
  ARM: shmobile: r8a7779: Remove USB function GPIOs
  ARM: shmobile: r8a7779: Remove HSPI function GPIOs
  ARM: shmobile: r8a7779: Remove SCIF function GPIOs
  ARM: shmobile: r8a7779: Remove SDHI and MMCIF function GPIOs
  ARM: shmobile: r8a7779: Remove DU function GPIOs
  ARM: shmobile: r8a7779: Remove DU1_DOTCLKOUT1 GPIO
  ARM: shmobile: r8a7740: Remove SDHI and MMCIF function GPIOs
  ARM: shmobile: r8a7740: Remove LCD0 and LCD1 function GPIOs
  ARM: shmobile: sh73a0: Remove IrDA function GPIOs
  ARM: shmobile: sh73a0: Remove USB function GPIOs
  ARM: shmobile: sh73a0: Remove BSC function GPIOs
  ARM: shmobile: sh73a0: Remove KEYSC function GPIOs
  ARM: shmobile: sh73a0: Remove pull-up function GPIOS
  ARM: shmobile: sh73a0: Remove FSI function GPIOs
  ARM: shmobile: sh73a0: Remove I2C function GPIOs
  ARM: shmobile: sh73a0: Remove SCIFA and SCIFB function GPIOs
  ARM: shmobile: sh73a0: Remove LCDC and LCDC2 function GPIOs
  ARM: shmobile: sh7372: Remove SDHI and MMCIF function GPIOs
  ...

Pull ARM SoC driver changes from Olof Johansson:
 "This is a rather large set of patches for device drivers that for one
  reason or another the subsystem maintainer preferred to get merged
  through the arm-soc tree.  There are both new drivers as well as
  existing drivers that are getting converted from platform-specific
  code into standalone drivers using the appropriate subsystem specific
  interfaces.

  In particular, we can now have pinctrl, clk, clksource and irqchip
  drivers in one file per driver, without the need to call into platform
  specific interface, or to get called from platform specific code, as
  long as all information about the hardware is provided through a
  device tree.

  Most of the drivers we touch this time are for clocksource.  Since now
  most of them are part of drivers/clocksource, I expect that we won't
  have to touch these again from arm-soc and can let the clocksource
  maintainers take care of these in the future.

  Another larger part of this series is specific to the exynos platform,
  which is seeing some significant effort in upstreaming and
  modernization of its device drivers this time around, which
  unfortunately is also the cause for the churn and a lot of the merge
  conflicts.

  There is one new subsystem that gets merged as part of this series:
  the reset controller interface, which is a very simple interface for
  taking devices on the SoC out of reset or back into reset.  Patches to
  use this interface on i.MX follow later in this merge window, and we
  are going to have other platforms (at least tegra and sirf) get
  converted in 3.11.  This will let us get rid of platform specific
  callbacks in a number of platform independent device drivers."

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits)
  irqchip: s3c24xx: add missing __init annotations
  ARM: dts: Disable the RTC by default on exynos5
  clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3}
  ARM: exynos: restore mach/regs-clock.h for exynos5
  clocksource: exynos_mct: fix build error on non-DT
  pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register()
  irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure
  reset: NULL deref on allocation failure
  reset: Add reset controller API
  dt: describe base reset signal binding
  ARM: EXYNOS: Add arm-pmu DT binding for exynos421x
  ARM: EXYNOS: Add arm-pmu DT binding for exynos5250
  ARM: EXYNOS: Enable PMUs for exynos4
  irqchip: exynos-combiner: Correct combined IRQs for exynos4
  irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq
  ARM: EXYNOS: fix compilation error introduced due to common clock migration
  clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3}
  clk: exynos4: export clocks required for fimc-is
  clk: samsung: Fix compilation error
  clk: tegra: fix enum tegra114_clk to match binding
  ...

Pull nfsd changes from J Bruce Fields:
 "Highlights include:

   - Some more DRC cleanup and performance work from Jeff Layton

   - A gss-proxy upcall from Simo Sorce: currently krb5 mounts to the
     server using credentials from Active Directory often fail due to
     limitations of the svcgssd upcall interface.  This replacement
     lifts those limitations.  The existing upcall is still supported
     for backwards compatibility.

   - More NFSv4.1 support: at this point, if a user with a current
     client who upgrades from 4.0 to 4.1 should see no regressions.  In
     theory we do everything a 4.1 server is required to do.  Patches
     for a couple minor exceptions are ready for 3.11, and with those
     and some more testing I'd like to turn 4.1 on by default in 3.11."

Fix up semantic conflict as per Stephen Rothwell and linux-next:

Commit 030d794b ("SUNRPC: Use gssproxy upcall for server RPCGSS
authentication") adds two new users of "PDE(inode)->data", but we're
supposed to use "PDE_DATA(inode)" instead since commit d9dda78b
("procfs: new helper - PDE_DATA(inode)").

The old PDE() macro is no longer available since commit c30480b9
("proc: Make the PROC_I() and PDE() macros internal to procfs")

* 'for-3.10' of git://linux-nfs.org/~bfields/linux: (60 commits)
  NFSD: SECINFO doesn't handle unsupported pseudoflavors correctly
  NFSD: Simplify GSS flavor encoding in nfsd4_do_encode_secinfo()
  nfsd: make symbol nfsd_reply_cache_shrinker static
  svcauth_gss: fix error return code in rsc_parse()
  nfsd4: don't remap EISDIR errors in rename
  svcrpc: fix gss-proxy to respect user namespaces
  SUNRPC: gssp_procedures[] can be static
  SUNRPC: define {create,destroy}_use_gss_proxy_proc_entry in !PROC case
  nfsd4: better error return to indicate SSV non-support
  nfsd: fix EXDEV checking in rename
  SUNRPC: Use gssproxy upcall for server RPCGSS authentication.
  SUNRPC: Add RPC based upcall mechanism for RPCGSS auth
  SUNRPC: conditionally return endtime from import_sec_context
  SUNRPC: allow disabling idle timeout
  SUNRPC: attempt AF_LOCAL connect on setup
  nfsd: Decode and send 64bit time values
  nfsd4: put_client_renew_locked can be static
  nfsd4: remove unused macro
  nfsd4: remove some useless code
  nfsd4: implement SEQ4_STATUS_RECALLABLE_STATE_REVOKED
  ...

Pull jfs fixes from David Kleikamp:
 "A couple fixes for jfs"

(What's with the unhelpful pull request "explanations" from fs people
today?)

* tag 'jfs-3.10' of git://github.com/kleikamp/linux-shaggy:
  jfs: fix a couple races
  jfs: avoid undefined behavior from left-shifting by 32 bits

Pull ext3/jbd fixes from Jan Kara:
 "A couple of ext3/jbd fixes"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  jbd: use kmem_cache_zalloc for allocating journal head
  jbd: use kmem_cache_zalloc instead of kmem_cache_alloc/memset
  jbd: don't wait (forever) for stale tid caused by wraparound
  ext3: fix data=journal fast mount/umount hang

Pull ARM updates from Russell King:
 "The major items included in here are:

   - MCPM, multi-cluster power management, part of the infrastructure
     required for ARMs big.LITTLE support.

   - A rework of the ARM KVM code to allow re-use by ARM64.

   - Error handling cleanups of the IS_ERR_OR_NULL() madness and fixes
     of that stuff for arch/arm

   - Preparatory patches for Cortex-M3 support from Uwe Kleine-König.

  There is also a set of three patches in here from Hugh/Catalin to
  address freeing of inappropriate page tables on LPAE.  You already
  have these from akpm, but they were already part of my tree at the
  time he sent them, so unfortunately they'll end up with duplicate
  commits"

* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (77 commits)
  ARM: EXYNOS: remove unnecessary use of IS_ERR_VALUE()
  ARM: IMX: remove unnecessary use of IS_ERR_VALUE()
  ARM: OMAP: use consistent error checking
  ARM: cleanup: OMAP hwmod error checking
  ARM: 7709/1: mcpm: Add explicit AFLAGS to support v6/v7 multiplatform kernels
  ARM: 7700/2: Make cpu_init() notrace
  ARM: 7702/1: Set the page table freeing ceiling to TASK_SIZE
  ARM: 7701/1: mm: Allow arch code to control the user page table ceiling
  ARM: 7703/1: Disable preemption in broadcast_tlb*_a15_erratum()
  ARM: mcpm: provide an interface to set the SMP ops at run time
  ARM: mcpm: generic SMP secondary bringup and hotplug support
  ARM: mcpm_head.S: vlock-based first man election
  ARM: mcpm: Add baremetal voting mutexes
  ARM: mcpm: introduce helpers for platform coherency exit/setup
  ARM: mcpm: introduce the CPU/cluster power API
  ARM: multi-cluster PM: secondary kernel entry code
  ARM: cacheflush: add synchronization helpers for mixed cache state accesses
  ARM: cpu hotplug: remove majority of cache flushing from platforms
  ARM: smp: flush L1 cache in cpu_die()
  ARM: tegra: remove tegra specific cpu_disable()
  ...

Pull sound updates from Takashi Iwai:
 "Mostly many small changes spread as seen in diffstat in sound/*
  directory by this update.  A significant change in the subsystem level
  is the introduction of snd_soc_component, which will help more generic
  handling of SoC and off-SoC components.

  Also, snd_BUG_ON() macro is enabled unconditionally now due to its
  misuses, so people might hit kernel warnings (it's a good thing for
  us).

   - compress-offload: support for capture by Charles Keepax
   - HD-audio: codec delay support by Dylan Reid
   - HD-audio: improvements/fixes in generic parser: better headphone
     mic and headset mic support, jack_modes hint consolidation, proper
     beep attach/detachment, generalized power filter controls by David
     Henningsson, et al
   - HD-audio: Improved management of HDMI codec pins/converters
   - HD-audio: Better pin/DAC assignment for VIA codecs
   - HD-audio: Haswell HDMI workarounds
   - HD-audio: ALC268 codec support, a few new quirks for Chromebooks
   - USB: regression fixes: USB-MIDI autopm fix, the recent ISO latency
     fix by Clemens Ladisch
   - USB: support for DSD formats by Daniel Mack
   - USB: A few UAC2 device endian/cock fixes by Eldad Zack
   - USB: quirks for Emu 192kHz support, Novation Twitch DJ controller,
     Yamaha THRxx devices
   - HDSPM: updates for TCO controls by Adrian Knoth
   - ASoC: Add a snd_soc_component object type for generic handling of
     SoC and off-SoC components by Kuninori Morimoto,
   - dmaengine: a large set of cleanups and conversions by Lars-Peter
     Clausen
   - ASoC DAPM: performance optimizations from Ryo Tsutsui
   - ASoC DAPM: support for mixer control sharing by Stephen Warren
   - ASoC: multiplatform ARM cleanups from Arnd Bergmann
   - ASoC: new codec drivers for AK5385 and TAS5086 from Daniel Mack"

* tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (315 commits)
  ALSA: usb-audio: caiaq: fix endianness bug in snd_usb_caiaq_maschine_dispatch
  ALSA: asihpi: add format support check in snd_card_asihpi_capture_formats
  ALSA: pcm_format_to_bits strong-typed conversion
  ALSA: compress: fix the states to check for allowing read
  ALSA: hda - Move Thinkpad X220 to use auto parser
  ALSA: USB: adjust for changed 3.8 USB API
  ALSA: usb - Avoid unnecessary sample rate changes on USB 2.0 clock sources
  sound: oss/dmabuf: use dma_map_single
  ALSA: ali5451: use mdelay instead of large udelay constants
  ALSA: hda - Add the support for ALC286 codec
  ALSA: usb-audio: USB quirk for Yamaha THR10C
  ALSA: usb-audio: USB quirk for Yamaha THR5A
  ALSA: usb-audio: USB quirk for Yamaha THR10
  ALSA: usb-audio: Fix autopm error during probing
  ALSA: snd-usb: try harder to find USB_DT_CS_ENDPOINT
  ALSA: sound kconfig typo
  ALSA: emu10k1: Fix dock firmware loading
  ASoC: ux500: forward declare msp_i2s_platform_data
  ASoC: davinci-mcasp: Add Support BCLK-to-LRCLK ratio for TDM modes
  ASoC: davinci-pcm, davinci-mcasp: Clean up active_serializers
  ...

Pull pstore update from Anton Vorontsov:

 - A new platform data parameter to specify ECC configuration;

 - Rounding fixup to not waste memory in ecc_blocks;

 - Restore ECC information printouts;

 - A small code cleanup: use kmemdup where appropriate.

* tag 'for-v3.10' of git://git.infradead.org/users/cbou/linux-pstore:
  pstore/ram: Restore ecc information block
  pstore/ram: Allow specifying ecc parameters in platform data
  pstore/ram: Include ecc_size when calculating ecc_block
  pstore: Replace calls to kmalloc and memcpy with kmemdup

We can step on WARN_ON_ONCE() in sem_getref() if a semaphore is removed
just as we are about to call sem_getref() from semctl_main(); results
are not pretty.

We should fail with -EIDRM, same as if IPC_RM happened while we'd been
doing allocation there.  This also expands sem_getref() at its only
callsite (and fixed there), while sem_getref_and_unlock() is simply
killed off - it has no callers at all.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for 3.10.

  Wierd bits:
   - OMAP drm changes required OMAP dss changes, in drivers/video, so I
     took them in here.
   - one more fbcon fix for font handover
   - VT switch avoidance in pm code
   - scatterlist helpers for gpu drivers - have acks from akpm

  Highlights:
   - qxl kms driver - driver for the spice qxl virtual GPU

  Nouveau:
   - fermi/kepler VRAM compression
   - GK110/nvf0 modesetting support.

  Tegra:
   - host1x core merged with 2D engine support

  i915:
   - vt switchless resume
   - more valleyview support
   - vblank fixes
   - modesetting pipe config rework

  radeon:
   - UVD engine support
   - SI chip tiling support
   - GPU registers initialisation from golden values.

  exynos:
   - device tree changes
   - fimc block support

  Otherwise:
   - bunches of fixes all over the place."

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (513 commits)
  qxl: update to new idr interfaces.
  drm/nouveau: fix build with nv50->nvc0
  drm/radeon: fix handling of v6 power tables
  drm/radeon: clarify family checks in pm table parsing
  drm/radeon: consolidate UVD clock programming
  drm/radeon: fix UPLL_REF_DIV_MASK definition
  radeon: add bo tracking debugfs
  drm/radeon: add new richland pci ids
  drm/radeon: add some new SI PCI ids
  drm/radeon: fix scratch reg handling for UVD fence
  drm/radeon: allocate SA bo in the requested domain
  drm/radeon: fix possible segfault when parsing pm tables
  drm/radeon: fix endian bugs in atom_allocate_fb_scratch()
  OMAPDSS: TFP410: return EPROBE_DEFER if the i2c adapter not found
  OMAPDSS: VENC: Add error handling for venc_probe_pdata
  OMAPDSS: HDMI: Add error handling for hdmi_probe_pdata
  OMAPDSS: RFBI: Add error handling for rfbi_probe_pdata
  OMAPDSS: DSI: Add error handling for dsi_probe_pdata
  OMAPDSS: SDI: Add error handling for sdi_probe_pdata
  OMAPDSS: DPI: Add error handling for dpi_probe_pdata
  ...

Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge the fixes for the server driver dirty update paths
* server-fixes:
  drm/cirrus: deal with bo reserve fail in dirty update path
  drm/ast: deal with bo reserve fail in dirty update path
  drm/mgag200: deal with bo reserve fail in dirty update path

OMAPDSS fixes for 3.10:

* Compilation fix when DSI is disabled in Kconfig
* Basic deferred probe support to fix DT boot

* tag 'omapdss-for-3.10-fixes' of git://gitorious.org/linux-omap-dss2/linux:
  OMAPDSS: TFP410: return EPROBE_DEFER if the i2c adapter not found
  OMAPDSS: VENC: Add error handling for venc_probe_pdata
  OMAPDSS: HDMI: Add error handling for hdmi_probe_pdata
  OMAPDSS: RFBI: Add error handling for rfbi_probe_pdata
  OMAPDSS: DSI: Add error handling for dsi_probe_pdata
  OMAPDSS: SDI: Add error handling for sdi_probe_pdata
  OMAPDSS: DPI: Add error handling for dpi_probe_pdata
  OMAPDSS: VENC: use platform_driver_register()
  OMAPDSS: HDMI: use platform_driver_register()
  OMAPDSS: RFBI: use platform_driver_register()
  OMAPDSS: DSI: use platform_driver_register()
  OMAPDSS: SDI: use platform_driver_register()
  OMAPDSS: DPI: use platform_driver_register()
  OMAPFB: defer probe if no displays
  OMAPFB: use module_platform_driver()
  OMAPDSS: Makefile: move omapfb after panels
  OMAPDSS: DPI: fix compilation if DSI not compiled in

Just some fixes that have accumulated over the last couple of
weeks and some new PCI ids.

* 'drm-next-3.10-2' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: fix handling of v6 power tables
  drm/radeon: clarify family checks in pm table parsing
  drm/radeon: consolidate UVD clock programming
  drm/radeon: fix UPLL_REF_DIV_MASK definition
  radeon: add bo tracking debugfs
  drm/radeon: add new richland pci ids
  drm/radeon: add some new SI PCI ids
  drm/radeon: fix scratch reg handling for UVD fence
  drm/radeon: allocate SA bo in the requested domain
  drm/radeon: fix possible segfault when parsing pm tables
  drm/radeon: fix endian bugs in atom_allocate_fb_scratch()

Pull scheduler fixes from Ingo Molnar:
 "This fixes the cputime scaling overflow problems for good without
  having bad 32-bit overhead, and gets rid of the div64_u64_rem() helper
  as well."

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "math64: New div64_u64_rem helper"
  sched: Avoid prev->stime underflow
  sched: Do not account bogus utime
  sched: Avoid cputime scaling overflow

Pull crypto update from Herbert Xu:

 - XTS mode optimisation for twofish/cast6/camellia/aes on x86

 - AVX2/x86_64 implementation for blowfish/twofish/serpent/camellia

 - SSSE3/AVX/AVX2 optimisations for sha256/sha512

 - Added driver for SAHARA2 crypto accelerator

 - Fix for GMAC when used in non-IPsec secnarios

 - Added generic CMAC implementation (including IPsec glue)

 - IP update for crypto/atmel

 - Support for more than one device in hwrng/timeriomem

 - Added Broadcom BCM2835 RNG driver

 - Misc fixes

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (59 commits)
  crypto: caam - fix job ring cleanup code
  crypto: camellia - add AVX2/AES-NI/x86_64 assembler implementation of camellia cipher
  crypto: serpent - add AVX2/x86_64 assembler implementation of serpent cipher
  crypto: twofish - add AVX2/x86_64 assembler implementation of twofish cipher
  crypto: blowfish - add AVX2/x86_64 implementation of blowfish cipher
  crypto: tcrypt - add async cipher speed tests for blowfish
  crypto: testmgr - extend camellia test-vectors for camellia-aesni/avx2
  crypto: aesni_intel - fix Kconfig problem with CRYPTO_GLUE_HELPER_X86
  crypto: aesni_intel - add more optimized XTS mode for x86-64
  crypto: x86/camellia-aesni-avx - add more optimized XTS code
  crypto: cast6-avx: use new optimized XTS code
  crypto: x86/twofish-avx - use optimized XTS code
  crypto: x86 - add more optimized XTS-mode for serpent-avx
  xfrm: add rfc4494 AES-CMAC-96 support
  crypto: add CMAC support to CryptoAPI
  crypto: testmgr - add empty test vectors for null ciphers
  crypto: testmgr - add AES GMAC test vectors
  crypto: gcm - fix rfc4543 to handle async crypto correctly
  crypto: gcm - make GMAC work when dst and src are different
  hwrng: timeriomem - added devicetree hooks
  ...

Pull xfs update from Ben Myers:
 "For 3.10-rc1 we have a number of bug fixes and cleanups and a
  currently experimental feature from David Chinner, CRCs protection for
  metadata.  CRCs are enabled by using mkfs.xfs to create a filesystem
  with the feature bits set.

   - numerous fixes for speculative preallocation
   - don't verify buffers on IO errors
   - rename of random32 to prandom32
   - refactoring/rearrangement in xfs_bmap.c
   - removal of unused m_inode_shrink in struct xfs_mount
   - fix error handling of xfs_bufs and readahead
   - quota driven preallocation throttling
   - fix WARN_ON in xfs_vm_releasepage
   - add ratelimited printk for different alert levels
   - fix spurious forced shutdowns due to freed Extent Free Intents
   - remove some obsolete XLOG_CIL_HARD_SPACE_LIMIT() macros
   - remove some obsoleted comments
   - (experimental) CRC support for metadata"

* tag 'for-linus-v3.10-rc1' of git://oss.sgi.com/xfs/xfs: (46 commits)
  xfs: fix da node magic number mismatches
  xfs: Remote attr validation fixes and optimisations
  xfs: Teach dquot recovery about CONFIG_XFS_QUOTA
  xfs: add metadata CRC documentation
  xfs: implement extended feature masks
  xfs: add CRC checks to the superblock
  xfs: buffer type overruns blf_flags field
  xfs: add buffer types to directory and attribute buffers
  xfs: add CRC protection to remote attributes
  xfs: split remote attribute code out
  xfs: add CRCs to attr leaf blocks
  xfs: add CRCs to dir2/da node blocks
  xfs: shortform directory offsets change for dir3 format
  xfs: add CRC checking to dir2 leaf blocks
  xfs: add CRC checking to dir2 data blocks
  xfs: add CRC checking to dir2 free blocks
  xfs: add CRC checks to block format directory blocks
  xfs: add CRC checks to remote symlinks
  xfs: split out symlink code into it's own file.
  xfs: add version 3 inode format with CRCs
  ...

Pull ReportingBugs rewrite from Sarah Sharp:
 "Here are the updates to ReportingBugs that were discussed and acked a
  couple weeks ago.  I've updated the fifth patch with your ack, as
  requested"

* tag 'for-linus-docs-2012-05-02' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci:
  Docs: Move ref to Frohwalt Egerer to end of REPORTING-BUGS
  Docs: Add a tips section to REPORTING-BUGS.
  Docs: Expectations for bug reporters and maintainers
  Docs: Add info on supported kernels to REPORTING-BUGS.
  Docs: Add "Gather info" section to REPORTING-BUGS.
  Docs: Step-by-step directions for reporting bugs.
  Trivial: docs: Remove six-space indentation in REPORTING-BUGS.

Pull x86 fixes from Peter Anvin:
 "Two regression fixes:

  1. On 64 bits, we would set NX on non-NX-capable hardware (very rare
     in 64-bit land, but a nonzero subset.)

  2. Fix suspend/resume across kernel versions"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86-64, init: Do not set NX bits on non-NX capable hardware
  x86, gdt, hibernate: Store/load GDT for hibernate path.

Merge tag 'pinctrl-fixes-v3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl fixes from Linus Walleij:
 "Two fixes to the pinctrl subsystem for v3.10:
   - A quite apparent mutex fix in an untested codepath
   - A compile warning fix in the plgpio driver"

* tag 'pinctrl-fixes-v3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: fix mutex deadlock in get_pinctrl_dev_from_of_node()
  pinctrl: plgpio: add CONFIG_PM_SLEEP to suspend/resume functions

Pull i2c changes from Wolfram Sang:

 - an arbitration driver.  While the driver is quite simple, it caused
   discussion if we need additional arbitration on top of the one
   specified in the I2C standard.  Conclusion is that I accept a few
   generic mechanisms, but not very specific ones.

 - the core lost the detach_adapter() call.  It has no users anymore and
   was in the way for other cleanups.  attach_adapter() is sadly still
   there since there are users waiting to be converted.

 - the core gained a bus recovery infrastructure.  I2C defines a way to
   recover if the data line is stalled.  This mechanism is now in the
   core and drivers can now pass some data to make use of it.

 - bigger driver cleanups for designware, s3c2410

 - removing superfluous refcounting from drivers

 - removing Ben Dooks as second maintainer due to inactivity.  Thanks
   for all your work so far, Ben!

 - bugfixes, feature additions, devicetree fixups, simplifications...

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
  i2c: xiic: must always write 16-bit words to TX_FIFO
  i2c: octeon: use HZ in timeout value
  i2c: octeon: Fix i2c fail problem when a process is terminated by a signal
  i2c: designware-pci: drop superfluous {get|put}_device
  i2c: designware-plat: drop superfluous {get|put}_device
  i2c: davinci: drop superfluous {get|put}_device
  MAINTAINERS: Ben Dooks is inactive regarding I2C
  i2c: mux: Add i2c-arb-gpio-challenge 'mux' driver
  i2c: at91: convert to dma_request_slave_channel_compat()
  i2c: mxs: do error checking and handling in PIO mode
  i2c: mxs: remove races in PIO code
  i2c-designware: switch to use runtime PM autosuspend
  i2c-designware: use usleep_range() in the busy-loop
  i2c-designware: enable/disable the controller properly
  i2c-designware: use dynamic adapter numbering on Lynxpoint
  i2c-designware-pci: use managed functions pcim_* and devm_*
  i2c-designware-pci: use dev_err() instead of printk()
  i2c-designware: move to managed functions (devm_*)
  i2c: remove CONFIG_HOTPLUG ifdefs
  i2c: s3c2410: Add SMBus emulation for block read
  ...

Pull virtio & lguest updates from Rusty Russell:
 "Lots of virtio work which wasn't quite ready for last merge window.

  Plus I dived into lguest again, reworking the pagetable code so we can
  move the switcher page: our fixmaps sometimes take more than 2MB now..."

Ugh.  Annoying conflicts with the tcm_vhost -> vhost_scsi rename.
Hopefully correctly resolved.

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (57 commits)
  caif_virtio: Remove bouncing email addresses
  lguest: improve code readability in lg_cpu_start.
  virtio-net: fill only rx queues which are being used
  lguest: map Switcher below fixmap.
  lguest: cache last cpu we ran on.
  lguest: map Switcher text whenever we allocate a new pagetable.
  lguest: don't share Switcher PTE pages between guests.
  lguest: expost switcher_pages array (as lg_switcher_pages).
  lguest: extract shadow PTE walking / allocating.
  lguest: make check_gpte et. al return bool.
  lguest: assume Switcher text is a single page.
  lguest: rename switcher_page to switcher_pages.
  lguest: remove RESERVE_MEM constant.
  lguest: check vaddr not pgd for Switcher protection.
  lguest: prepare to make SWITCHER_ADDR a variable.
  virtio: console: replace EMFILE with EBUSY for already-open port
  virtio-scsi: reset virtqueue affinity when doing cpu hotplug
  virtio-scsi: introduce multiqueue support
  virtio-scsi: push vq lock/unlock into virtscsi_vq_done
  virtio-scsi: pass struct virtio_scsi to virtqueue completion function
  ...

Pull vfio updates from Alex Williamson:
 "Changes include extension to support PCI AER notification to
  userspace, byte granularity of PCI config space and access to
  unarchitected PCI config space, better protection around IOMMU driver
  accesses, default file mode fix, and a few misc cleanups."

* tag 'vfio-for-v3.10' of git://github.com/awilliam/linux-vfio:
  vfio: Set container device mode
  vfio: Use down_reads to protect iommu disconnects
  vfio: Convert container->group_lock to rwsem
  PCI/VFIO: use pcie_flags_reg instead of access PCI-E Capabilities Register
  vfio-pci: Enable raw access to unassigned config space
  vfio-pci: Use byte granularity in config map
  vfio: make local function vfio_pci_intx_unmask_handler() static
  VFIO-AER: Vfio-pci driver changes for supporting AER
  VFIO: Wrapper for getting reference to vfio_device

Signed-off-by: Dave Airlie <airlied@redhat.com>

Conflicts:
	arch/arm/plat-omap/dmtimer.c

Merge branches 'devel-stable', 'entry', 'fixes', 'mach-types', 'misc' and 'smp-hotplug' into for-linus

Pull vhost cleanups and fixes from Michael Tsirkin:
 "Here are vhost cleanups and fixes by Asias He and myself.  They affect
  both vhost-net and vhost-scsi devices.  They also *depend* on both
  net-next and target-pending, where the net and target commits these
  changes depend on are already merged.  So merging through the common
  vhost tree."

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost_scsi: module rename
  tcm_vhost: header split up
  vhost: src file renames
  vhost: fix error handling in RESET_OWNER ioctl
  tcm_vhost: remove virtio-net.h dependency
  vhost: move per-vq net specific fields out to net
  tcm_vhost: document inflight ref-counting use
  vhost: move vhost-net zerocopy fields to net.c
  tcm_vhost: Wait for pending requests in vhost_scsi_flush()
  vhost: Allow device specific fields per vq

This is to fix a merge problem with mach-highbank/hotplug.c, which git
silently resolves, but wrongly.  This commit contains the correct
resolution.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

s5p_register_gpio_interrupt() returns 0 or positive for success, and
-ve for errors, so just use the standard >= 0 test.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

device_register() returns -ve values for errors, and zero for success.
There's no need to obfuscate the code with IS_ERR_VALUE().
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Consistently check errors using the usual method used in the kernel
for much of its history.  For instance:

int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
{
	int div;
	div = gpmc_calc_divider(t->sync_clk);
	if (div < 0)
		return div;
static int gpmc_set_async_mode(int cs, struct gpmc_timings *t)
{
...
	return gpmc_cs_set_timings(cs, t);

.....
	ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t);
	if (IS_ERR_VALUE(ret))
		return ret;

So, gpmc_cs_set_timings() thinks any negative return value is an error,
but where we check that in higher levels, only a limited range are
errors...

There is only _one_ use of IS_ERR_VALUE() in arch/arm which is really
appropriate, and that is in arch/arm/include/asm/syscall.h:

static inline long syscall_get_error(struct task_struct *task,
				     struct pt_regs *regs)
{
	unsigned long error = regs->ARM_r0;
	return IS_ERR_VALUE(error) ? error : 0;
}

because this function really does have to differentiate between error
return values and addresses which look like negative numbers (eg, from
mmap()).

So, here's a patch to remove them from OMAP, except for the above.
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

omap_hwmod_lookup() only returns NULL on error, never an error pointer.
Checking the returned pointer using IS_ERR_OR_NULL() is needless
overhead.  Use a simple !ptr check instead.

OMAP devices (oh->od) always have a valid platform device attached (see
omap_device_alloc()) so there's no point validating the platform device
pointer (we will have already oopsed long before if this is not the
case here.)

Lastly, oh->od is only ever NULL or a valid omap device pointer - 'oh'
comes from the statically declared hwmod tables, and the pointer is
only filled in by omap_device_alloc() at a point where the omap device
pointer must be valid.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

During early init, we would incorrectly set the NX bit even if the NX
feature was not supported.  Instead, only set this bit if NX is
actually available and enabled.  We already do very early detection of
the NX bit to enable it in EFER, this simply extends this detection to
the early page table mask.
Reported-by: Fernando Luis Vázquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Link: http://lkml.kernel.org/r/1367476850.5660.2.camel@nexus
Cc: <stable@vger.kernel.org> v3.9