- 11 Sep, 2009 31 commits
-
-
Nelson Elhage authored
Note that this patch moves .data.init_task inside _edata. In addition, the alignment of .init.ramfs changes: It is now PAGE_ALIGNED and __initramfs_end is arbitrarily aligned; Previously it was only aligned to a 0x100-byte boundary, and always ended on an even byte. This change results in fewer output sections and in some data being reordered, but should have no functional effect. Signed-off-by: Nelson Elhage <nelhage@ksplice.com> Signed-off-by: Tim Abbott <tabbott@ksplice.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Tim Abbott authored
.data.page_aligned should not need a separate output section, so as part of this cleanup I moved into the .data output section in the linker scripts in order to eliminate unnecessary references to the section name. Remove the reference to .data.idt, since nothing is put into the .data.idt section on the s390 architecture. It looks like Cyrill Gorcunov posted a patch to remove the .data.idt code on s390 previously: <http://lkml.indiana.edu/hypermail/linux/kernel/0802.2/2536.html> CCing him and the people who acked that patch in case there's a reason it wasn't applied. Signed-off-by: Tim Abbott <tabbott@ksplice.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Hendrik Brueckner authored
The sysc_restore_trace_psw and io_restore_trace_psw storage locations are created in the .text section. When creating and IPLing from a named saved system (NSS), writing to these locations causes a protection exception (because the .text section is mapped as shared read-only in the NSS). To permit write access, move the storage locations into the .data section. The problem occurs only when CONFIG_TRACE_IRQFLAGS is set. The git commmit that has introduced these variables is: 411788eaSigned-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Hendrik Brueckner authored
If the CP SET LOADDEV on the 3215 console has been used to specify SCPdata, all data is converted to upper case letters. When scpdata contains upper case letters only, convert all letters to lower case. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Hendrik Brueckner authored
Append scpdata to the kernel boot command line. If scpdata starts with the equal sign (=), the kernel boot command line is replaced. (For consistency with zIPL and IPL PARM parameters.) To use scpdata for the kernel boot command line, scpdata must consist of ascii characters only. If scpdata contains other characters, scpdata is not appended to the kernel boot command line. In addition, re-IPL is extended for setting scpdata for the next Linux reboot. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Frank Munzert authored
With CONFIG_DEBUG_OBJECTS_TIMERS=y "chccwdev --online" for a tape device will fail with message "ODEBUG: object is on stack, but not annotated". We now use init_timer_on_stack. Signed-off-by: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Don't use kfree directly after device registration started. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Merge the nearly empty C files and move everything from power/ to kernel/. That way the files are easier to handle. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
There is no caller of do_after_copyback() anywhere. Remove it. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Couple of coding style fixes, replace __inline__ with inline and remove #ifdef __KERNEL_- since the header file isn't exported. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Use compare double and swap to implement efficient atomic64 ops for 31 bit. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Martin Schwidefsky authored
Move the 64 bit mount code from mcount.S into mcount64.S and avoid code duplication. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
In the meantime gcc generates better code than the old inline assemblies do. Original inline assembly results in: lr %r1,%r2 sr %r3,%r3 lr %r2,%r1 srdl %r2,16 alr %r2,%r3 alr %r1,%r2 srl %r1,16 xilf %r1,65535 llghr %r2,%r1 br %r14 Out of the C code gcc generates this: rll %r1,%r2,16 ar %r1,%r2 srl %r1,16 xilf %r1,65535 llghr %r2,%r1 br %r14 In addition we don't have any static register allocations anymore and gcc is free to shuffle instructions around for better pipeline usage. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
Introduce get_clock_monotonic() function which can be used to get a (fast) timestamp. Resolution is the same as for get_clock(). The only difference is that the timestamps are monotonic and don't jump backward or forward. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Stefan Haberland authored
This patch fixes message naming so that generic dasd messages do not contain the device discipline. For this purpose the dev_ makros are replaced by pr_ makros for generic dasd messages. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Stefan Haberland authored
remove unnecessary dbf call, remove string operations for magic Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Stefan Weinhuber authored
A DASD device that is not ready or online has no defined disk layout, so all requests that arrive in such a state need to be returned as failed. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
We used the init_name to set the console ccw_device's name early at the boot stage. This patch moves the name setting (for all ccw devices) to the point where we actually register the device. At this time we can do dynamic allocations and therefore use dev_set_name. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
We use a test_and_clear_bit to prevent a device from being unregistered twice. Unfortunately in this cases the "final" put_device (from device_initialize) was issued more than once, resulting in an use after free error. Fix this by moving this put_device to ccw_device_unregister. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
We used the init_name to set the console subchannels name early at the boot stage. With the patch cio: fix memleak in subchannel validation we moved the name setting to the point where we actually register the console subchannel. At this time we can do dynamic allocations and therefore use dev_set_name. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
When scanning for new subchannels we have a code path where we allocate memory for a struct subchannel, set the device name (which is dynamically allocated now) and do a check if the underlying device is blacklisted - if so we free the subchannel structure. Since we have not set up refcounting at this stage, the device name's memory is lost. Fix this by moving the dev_set_name after the blacklist test. Note: With this patch the init_name for the console subchannel becomes virtually obsolete. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
When using s390dbf with "%s" in sprintf format strings the string itself is not copied to the dbf buffer. Since in this case only pointers are stored in the s390dbf, we should not use dev_name - which is bound to the lifetime of the device. Reading this entry from s390dbf after the device was released will cause an use after free error. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Jan Glauber authored
The number of qdio debugfs entries was limited. Remove this limit and group the queue files in a per device directory. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Michael Ernst authored
When unit checks trigger sensing the device state is set to W4SENSE until sense completion; then the device state is set back to ONLINE. If a unit check occurs while set online or set offline requests are processed then it might happen that the device's temporary W4SENSE state causes these functions to terminate, leaving the device in an inconsistent state when the state is set back to ONLINE later on so that the device cannot be set online or offline any longer. To solve this, set online/offline and related rollback or error routines are processed only if the device is in a final or DISCONNECTED state. Signed-off-by: Michael Ernst <mernst@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Ensure to always hold an extra device reference for scheduling a subchannel deregistration, by moving the get_device to ccw_device_schedule_sch_unregister. This fixes an use after free error in ccw_device_call_sch_unregister where put_device was called on an already freed device structure. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Jan Glauber authored
With commit c38f9608 polling was stopped for the queue even if new data is available. Return immediately after scheduling the queue tasklet if the queue is not done. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
Move debug traces for start I/O and interrupt events to exclusive trace levels. Also change tracing in hot-path from sprintf (costly) to hex. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Sebastian Ott authored
If online/offline processing of a ccw device fails, resulting in not operational state, notify the driver and unregister the device in case the driver dosn't want to keep it. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Peter Oberparleiter authored
Ensure that the hardware interruption parameter for a subchannel is reset when the associated subchannel data structure is freed. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Heiko Carstens authored
All scsw helper functions are very short and usage of them shouldn't result in function calls. Therefore we move them to a separate header file. Also saves a lot of EXPORT_SYMBOLs. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Peter Oberparleiter authored
Path verification events occurring for offline devices are currently ignored. As a result, offline devices are not removed, even though they might no longer be accessible (for example because the last path to the device was varied offline). Fix this by scheduling a status evaluation for the affected subchannel when a path verification event occurs. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
- 10 Sep, 2009 3 commits
-
-
Geert Uytterhoeven authored
Commit b8313b6d ("dm log: remove incorrect field from userspace table output") added a call to strstr() with a single-character "needle" string parameter. Unfortunately some versions of gcc replace such calls to strstr() by calls to strchr() behind our back. This causes linking errors if strchr() is defined as an inline function in <asm/string.h> (e.g. on m68k): | WARNING: "strchr" [drivers/md/dm-log-userspace.ko] undefined! Avoid this by explicitly calling strchr() instead. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
* lookup-permissions-cleanup: jffs2/jfs/xfs: switch over to 'check_acl' rather than 'permission()' ext[234]: move over to 'check_acl' permission model shmfs: use 'check_acl' instead of 'permission' Make 'check_acl()' a first-class filesystem op Simplify exec_permission_lite(), part 3 Simplify exec_permission_lite() further Simplify exec_permission_lite() logic Do not call 'ima_path_check()' for each path component
-
Roland McGrath authored
In fs/binfmt_elf.c, load_elf_interp() calls padzero() for .bss even if the PT_LOAD has no PROT_WRITE and no .bss. This generates EFAULT. Here is a small test case. (Yes, there are other, useful PT_INTERP which have only .text and no .data/.bss.) ----- ptinterp.S _start: .globl _start nop int3 ----- $ gcc -m32 -nostartfiles -nostdlib -o ptinterp ptinterp.S $ gcc -m32 -Wl,--dynamic-linker=ptinterp -o hello hello.c $ ./hello Segmentation fault # during execve() itself After applying the patch: $ ./hello Trace trap # user-mode execution after execve() finishes If the ELF headers are actually self-inconsistent, then dying is fine. But having no PROT_WRITE segment is perfectly normal and correct if there is no segment with p_memsz > p_filesz (i.e. bss). John Reiser suggested checking for PROT_WRITE in the bss logic. I think it makes most sense to simply apply the bss logic only when there is bss. This patch looks less trivial than it is due to some reindentation. It just moves the "if (last_bss > elf_bss) {" test up to include the partial-page bss logic as well as the more-pages bss logic. Reported-by: John Reiser <jreiser@bitwagon.com> Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 09 Sep, 2009 3 commits
-
-
Linus Torvalds authored
-
Ed Cashin authored
Andy Whitcroft reported an oops in aoe triggered by use of an incorrectly initialised request_queue object: [ 2645.959090] kobject '<NULL>' (ffff880059ca22c0): tried to add an uninitialized object, something is seriously wrong. [ 2645.959104] Pid: 6, comm: events/0 Not tainted 2.6.31-5-generic #24-Ubuntu [ 2645.959107] Call Trace: [ 2645.959139] [<ffffffff8126ca2f>] kobject_add+0x5f/0x70 [ 2645.959151] [<ffffffff8125b4ab>] blk_register_queue+0x8b/0xf0 [ 2645.959155] [<ffffffff8126043f>] add_disk+0x8f/0x160 [ 2645.959161] [<ffffffffa01673c4>] aoeblk_gdalloc+0x164/0x1c0 [aoe] The request queue of an aoe device is not used but can be allocated in code that does not sleep. Bruno bisected this regression down to cd43e26f block: Expose stacked device queues in sysfs "This seems to generate /sys/block/$device/queue and its contents for everyone who is using queues, not just for those queues that have a non-NULL queue->request_fn." Addresses http://bugs.launchpad.net/bugs/410198 Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13942 Note that embedding a queue inside another object has always been an illegal construct, since the queues are reference counted and must persist until the last reference is dropped. So aoe was always buggy in this respect (Jens). Signed-off-by: Ed Cashin <ecashin@coraid.com> Cc: Andy Whitcroft <apw@canonical.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Bruno Premont <bonbons@linux-vserver.org> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
-
Linus Torvalds authored
Reinette Chatre reports a frozen system (with blinking keyboard LEDs) when switching from graphics mode to the text console, or when suspending (which does the same thing). With netconsole, the oops turned out to be BUG: unable to handle kernel NULL pointer dereference at 0000000000000084 IP: [<ffffffffa03ecaab>] i915_driver_irq_handler+0x26b/0xd20 [i915] and it's due to the i915_gem.c code doing drm_irq_uninstall() after having done i915_gem_idle(). And the i915_gem_idle() path will do i915_gem_idle() -> i915_gem_cleanup_ringbuffer() -> i915_gem_cleanup_hws() -> dev_priv->hw_status_page = NULL; but if an i915 interrupt comes in after this stage, it may want to access that hw_status_page, and gets the above NULL pointer dereference. And since the NULL pointer dereference happens from within an interrupt, and with the screen still in graphics mode, the common end result is simply a silently hung machine. Fix it by simply uninstalling the irq handler before idling rather than after. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13819Reported-and-tested-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 08 Sep, 2009 3 commits
-
-
Linus Torvalds authored
This avoids an indirect call in the VFS for each path component lookup. Well, at least as long as you own the directory in question, and the ACL check is unnecessary. Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Don't implement per-filesystem 'extX_permission()' functions that have to be called for every path component operation, and instead just expose the actual ACL checking so that the VFS layer can now do it for us. Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
shmfs wants purely standard POSIX ACL semantics, so we can use the new generic VFS layer POSIX ACL checking rather than cooking our own 'permission()' function. Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-