- 25 Aug, 2017 7 commits
-
-
Kai-Heng Feng authored
commit 1874064e upstream. Similar to commit 722c5ac7 ("Input: elan_i2c - add ELAN0605 to the ACPI table"), ELAN0608 should be handled by elan_i2c. This touchpad can be found in Lenovo ideapad 320-14IKB. BugLink: https://bugs.launchpad.net/bugs/1708852Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chunming Zhou authored
commit 7a7c286d upstream. update the list first to avoid redundant checks. Signed-off-by:
Chunming Zhou <David1.Zhou@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Chris Wilson authored
commit a0125a93 upstream. As we may have just bound the renderstate into the GGTT for execution, we need to ensure that the GTT TLB are also flushed. On snb-gt2, this would cause a random GPU hang at the start of a new context (e.g. boot) and on snb-gt1, it was causing the renderstate batch to take ~10s. It was the GPU hang that revealed the truth, as the CS gleefully executed beyond the end of the golden renderstate batch, a good indicator for a GTT TLB miss. Fixes: 20fe17aa ("drm/i915: Remove redundant TLB invalidate on switching contexts") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170808131904.1385-1-chris@chris-wilson.co.ukReviewed-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.12-rc1+ (cherry picked from commit 802673d6) Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
megha.dey@linux.intel.com authored
commit 8861249c upstream. It was reported that the sha1 AVX2 function(sha1_transform_avx2) is reading ahead beyond its intended data, and causing a crash if the next block is beyond page boundary: http://marc.info/?l=linux-crypto-vger&m=149373371023377 This patch makes sure that there is no overflow for any buffer length. It passes the tests written by Jan Stancek that revealed this problem: https://github.com/jstancek/sha1-avx2-crash I have re-enabled sha1-avx2 by reverting commit b82ce244 Fixes: b82ce244 ("crypto: sha1-ssse3 - Disable avx2") Originally-by:
Ilya Albrekht <ilya.albrekht@intel.com> Tested-by:
Jan Stancek <jstancek@redhat.com> Signed-off-by:
Megha Dey <megha.dey@linux.intel.com> Reported-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Herbert Xu authored
commit 28389575 upstream. In commit 0f987e25, the source processing has been moved in front of the destination processing, but the error handling path has not been modified accordingly. Free resources in the correct order to avoid some leaks. Fixes: 0f987e25 ("crypto: ixp4xx - Fix false lastlen uninitialised warning") Reported-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Thomas Bogendoerfer authored
commit 40981160 upstream. For 64bit kernels the lmmio_space_offset of the host bridge window isn't set correctly on systems with dino/cujo PCI host bridges. This leads to not assigned memory bars and failing drivers, which need to use these bars. Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Jan Kara authored
commit d76036ab upstream. audit_remove_watch_rule() drops watch's reference to parent but then continues to work with it. That is not safe as parent can get freed once we drop our reference. The following is a trivial reproducer: mount -o loop image /mnt touch /mnt/file auditctl -w /mnt/file -p wax umount /mnt auditctl -D <crash in fsnotify_destroy_mark()> Grab our own reference in audit_remove_watch_rule() earlier to make sure mark does not get freed under us. Reported-by:
Tony Jones <tonyj@suse.de> Signed-off-by:
Jan Kara <jack@suse.cz> Tested-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
- 16 Aug, 2017 33 commits
-
-
Greg Kroah-Hartman authored
-
Michael Neuling authored
commit 64ebb9a2 upstream. The P9 PVR bits 12-15 don't indicate a revision but instead different chip configurations. From BookIV we have: Bits Configuration 0 : Scale out 12 cores 1 : Scale out 24 cores 2 : Scale up 12 cores 3 : Scale up 24 cores DD1 doesn't use this but DD2 does. Linux will mostly use the "Scale out 24 core" configuration (ie. SMT4 not SMT8) which results in a PVR of 0x004e1200. The reported revision in /proc/cpuinfo is hence reported incorrectly as "18.0". This patch fixes this to mask off only the relevant bits for the major revision (ie. bits 8-11) for POWER9. Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by:
-
Steven J. Hill authored
commit 81a67e52 upstream. Commit "MIPS: Octeon: Remove unused L2C types and macros." broke the the EDAC driver. Bring back 'cvmx-l2d-defs.h' file and the missing types for L2C. Fixes: 15f68479 ("MIPS: Octeon: Remove unused L2C types and macros.") Fixes: 15f68479 ("MIPS: Octeon: Remove unused L2C types and macros.") Signed-off-by:
Steven J. Hill <steven.hill@cavium.com> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16906/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Paul Burton authored
commit ae5b0675 upstream. Commit 296e46db ("MIPS: Don't unnecessarily include kmalloc.h into <asm/cache.h>.") claimed that the inclusion of the machine's kmalloc.h from asm/cache.h is unnecessary, but this is not true. Without including kmalloc.h we don't get a definition for ARCH_DMA_MINALIGN, which means we no longer suitably align DMA. Further to this the definition of ARCH_KMALLOC_MINALIGN provided by linux/slab.h ends up being set to the alignment of an unsigned long long value rather than to ARCH_DMA_MINALIGN, which means that buffers allocated using kmalloc may no longer be safely aligned for use with DMA. Fix this by re-adding the include of kmalloc.h in asm/cache.h. This reverts commit 296e46db ("MIPS: Don't unnecessarily include kmalloc.h into <asm/cache.h>.") Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Fixes: 296e46db ("MIPS: Don't unnecessarily include kmalloc.h into <asm/cache.h>.") Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16895/Signed-off-by:
-
Maciej W. Rozycki authored
commit 68fe5568 upstream. Fix a commit 3021773c ("MIPS: DEC: Avoid la pseudo-instruction in delay slots") regression and remove assembly errors: arch/mips/dec/int-handler.S: Assembler messages: arch/mips/dec/int-handler.S:162: Error: Macro used $at after ".set noat" arch/mips/dec/int-handler.S:163: Error: Macro used $at after ".set noat" arch/mips/dec/int-handler.S:229: Error: Macro used $at after ".set noat" arch/mips/dec/int-handler.S:230: Error: Macro used $at after ".set noat" triggering with with the CPU_DADDI_WORKAROUNDS option set and the DADDIU instruction. This is because with that option in place the instruction becomes a macro, which expands to an LI/DADDU (or actually ADDIU/DADDU) sequence that uses $at as a temporary register. With CPU_DADDI_WORKAROUNDS we only support `-msym32' compilation though, and this is already enforced in arch/mips/Makefile, so choose the 32-bit expansion variant for the supported configurations and then replace the 64-bit variant with #error just in case. Fixes: 3021773c ("MIPS: DEC: Avoid la pseudo-instruction in delay slots") Signed-off-by:
Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16893/Signed-off-by:
-
Neil Armstrong authored
commit aa955695 upstream. GPIODV_18 entry was missing in the original driver push. Fixes: 0f15f500 ("pinctrl: meson: Add GXL pinctrl definitions") Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Neil Armstrong authored
commit 34e61801 upstream. GPIODV_18 entry was missing in the original driver push. Fixes: 468c234f ("pinctrl: amlogic: Add support for Amlogic Meson GXBB SoC") Signed-off-by:
-
Thomas Gleixner authored
commit 3fa53ec2 upstream. The irq chip callbacks irq_request/release_resources() have absolutely no business with masking and unmasking the irq. The core code unmasks the interrupt after complete setup and masks it before invoking irq_release_resources(). The unmask is actually harmful as it happens before the interrupt is completely initialized in __setup_irq(). Remove it. Fixes: f6a8249f ("pinctrl: exynos: Lock GPIOs as interrupts when used as EINTs") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Kukjin Kim <kgene@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-gpio@vger.kernel.org Acked-by:
Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by:
-
Masahiro Yamada authored
commit 1bd303dc upstream. The pingroups dump of debugfs hits WARN_ON() in pinctrl_groups_show(). Filling non-existing ports with '-1' turned out a bad idea. Fixes: 336306ee ("pinctrl: uniphier: add UniPhier PH1-LD20 pinctrl driver") Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Masahiro Yamada authored
commit 9592bc25 upstream. The pingroups dump of debugfs hits WARN_ON() in pinctrl_groups_show(). Filling non-existing ports with '-1' turned out a bad idea. Fixes: 70f2f9c4 ("pinctrl: uniphier: add UniPhier PH1-LD11 pinctrl driver") Signed-off-by:
-
Andy Shevchenko authored
commit 5d996132 upstream. UART pin lists consist GPIO numbers which is simply wrong. Replace it by pin numbers. Fixes: 4e80c8f5 ("pinctrl: intel: Add Intel Merrifield pin controller support") Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Icenowy Zheng authored
commit d81ece74 upstream. The PH16 pin has a function with mux id 0x5, which is the DET pin of the "sim" (smart card reader) IP block. This function is missing in old versions of A10/A20 SoCs' datasheets and user manuals, so it's also missing in the old drivers. The newest A10 Datasheet V1.70 and A20 Datasheet V1.41 contain this pin function, and it's discovered during implementing R40 pinctrl driver. Add it to the driver. As we now merged A20 pinctrl driver to the A10 one, we need to only fix the A10 driver now. Fixes: f2821b1c ("pinctrl: sunxi: Move Allwinner A10 pinctrl driver to a driver of its own") Signed-off-by:
Icenowy Zheng <icenowy@aosc.io> Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
-
Andy Shevchenko authored
commit 2d80bd3f upstream. Add one more model to the Chromebook DMI quirk to make it working again. Link: https://bugzilla.kernel.org/show_bug.cgi?id=194945 Fixes: 2a8209fa ("pinctrl: cherryview: Extend the Chromebook DMI quirk to Intel_Strago systems") Reported-by: mail@abhishek.geek.nz Signed-off-by:
-
Christoph Hellwig authored
commit 8a9d6e96 upstream. The blocklayout code does not compile cleanly for a 32-bit sector_t, and also has no reliable checks for devices sizes, which makes it unsafe to use with a kernel that doesn't support large block devices. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reported-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Stefan-Gabriel Mirea authored
commit d466d3c1 upstream. In order to select the alternate voltage reference pair (VALTH/VALTL), the right value for the REFSEL field in the ADCx_CFG register is "01", leading to 0x800 as register mask. See section 8.2.6.4 in the reference manual[1]. [1] http://www.nxp.com/docs/en/reference-manual/VFXXXRM.pdf Fixes: a7754276 ("iio:adc:imx: add Freescale Vybrid vf610 adc driver") Signed-off-by:
Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Marc Zyngier authored
commit 8466489e upstream. The Renesas uPD72020x XHCI controller seems to suffer from a really annoying bug, where it may retain some of its DMA programming across a XHCI reset, and despite the driver correctly programming new DMA addresses. This is visible if the device has been using 64-bit DMA addresses, and is then switched to using 32-bit DMA addresses. The top 32 bits of the address (now zero) are ignored are replaced by the 32 bits from the *previous* programming. Sticking with 64-bit DMA always works, but doesn't seem very appropriate. A PCI reset of the device restores the normal functionality, which is done at probe time. Unfortunately, this has to be done before any quirk has been discovered, hence the intrusive nature of the fix. Tested-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Marc Zyngier authored
commit a477b9cd upstream. The implementation of PCI workarounds may require that the device is reset from its probe function. This implies that the PCI device lock is already held, and makes calling pci_reset_function() impossible (since it will itself try to take that lock). Add pci_reset_function_locked(), which is the equivalent of pci_reset_function(), except that it requires the PCI device lock to be already held by the caller. Tested-by:
-
Christoph Hellwig authored
commit 52354b9d upstream. Implement the reset probing / reset chain directly in __pci_probe_reset_function() and __pci_reset_function_locked() respectively. Link: http://lkml.kernel.org/r/20170601111039.8913-4-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
commit b014e96d upstream. Every method in struct device_driver or structures derived from it like struct pci_driver MUST provide exclusion vs the driver's ->remove() method, usually by using device_lock(). Protect use of pci_error_handlers->reset_notify() by holding the device lock while calling it. Note: - pci_dev_lock() calls device_lock() in addition to blocking user-space config accesses. - pci_err_handlers->reset_notify() is used inside pci_dev_save_and_disable() and pci_dev_restore(). We could hold the device lock directly in pci_reset_notify(), but we expand the region since we have several calls following each other. Without this, ->reset_notify() may race with ->remove() calls, which can be easily triggered in NVMe. [bhelgaas: changelog, add pci_reset_notify() comment] [bhelgaas: fold in fix from Dan Carpenter <dan.carpenter@oracle.com>: http://lkml.kernel.org/r/20170701135323.x5vaj4e2wcs2mcro@mwanda] Link: http://lkml.kernel.org/r/20170601111039.8913-2-hch@lst.deReported-by:
Rakesh Pandit <rakesh@tuxera.com> Tested-by:
-
Sandeep Singh authored
commit e788787e upstream. Certain HP keyboards would keep inputting a character automatically which is the wake-up key after S3 resume On some AMD platforms USB host fails to respond (by holding resume-K) to USB device (an HP keyboard) resume request within 1ms (TURSM) and ensures that resume is signaled for at least 20 ms (TDRSMDN), which is defined in USB 2.0 spec. The result is that the keyboard is out of function. In SNPS USB design, the host responds to the resume request only after system gets back to S0 and the host gets to functional after the internal HW restore operation that is more than 1 second after the initial resume request from the USB device. As a workaround for specific keyboard ID(HP Keyboards), applying port reset after resume when the keyboard is plugged in. Signed-off-by:
Sandeep Singh <Sandeep.Singh@amd.com> Signed-off-by:
Shyam Sundar S K <Shyam-sundar.S-k@amd.com> cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com> Reviewed-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Kai-Heng Feng authored
commit 7496cfe5 upstream. Moshi USB to Ethernet Adapter internally uses a Genesys Logic hub to connect to Realtek r8153. The Realtek r8153 ethernet does not work on the internal hub, no-lpm quirk can make it work. Since another r8153 dongle at my hand does not have the issue, so add the quirk to the Genesys Logic hub instead. Signed-off-by:
-
Bin Liu authored
commit 2eac1362 upstream. While unlink an urb, if the urb has been programmed in the controller, the controller driver might do some hw related actions to tear down the urb. Currently usb_hcd_flush_endpoint() passes each urb from the head of the endpoint's urb_list to the controller driver, which could make the controller driver think each urb has been programmed and take the unnecessary actions for each urb. This patch changes the behavior in usb_hcd_flush_endpoint() to pass the urbs from the tail of the list, to avoid any unnecessary actions in an controller driver. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
-
Alan Stern authored
commit 94c43b98 upstream. Some buggy USB disk adapters disconnect and reconnect multiple times during the enumeration procedure. This may lead to a device connecting at full speed instead of high speed, because when the USB stack sees that a device isn't able to enumerate at high speed, it tries to hand the connection over to a full-speed companion controller. The logic for doing this is careful to check that the device is still connected. But this check is inadequate if the device disconnects and reconnects before the check is done. The symptom is that a device works, but much more slowly than it is capable of operating. The situation was made worse recently by commit 22547c4c ("usb: hub: Wait for connection to be reestablished after port reset"), which increases the delay following a reset before a disconnect is recognized, thus giving the device more time to reconnect. This patch makes the check more robust. If the device was disconnected at any time during enumeration, we will now skip the full-speed handover. Signed-off-by:
Zdenek Kabelac <zkabelac@redhat.com> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Yoshihiro Shimoda authored
commit 2acecd58 upstream. The latest HW manual (Rev.0.55) shows us this UGCTRL2.VBUSSEL bit. If the bit sets to 1, the VBUS drive is controlled by phy related registers (called "UCOM Registers" on the manual). Since R-Car Gen3 environment will control VBUS by phy-rcar-gen3-usb2 driver, the UGCTRL2.VBUSSEL bit should be set to 1. So, this patch fixes the register's value. Otherwise, even if the ID pin indicates to peripheral, the R-Car will output USBn_PWEN to 1 when a host driver is running. Fixes: de18757e ("usb: renesas_usbhs: add R-Car Gen3 power control" Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
-
Yoshihiro Shimoda authored
commit aca5b9eb upstream. According to the gadget.h, a "complete" function will always be called with interrupts disabled. However, sometimes usb3_request_done() function is called with interrupts enabled. So, this function should be held by spin_lock_irqsave() to disable interruption. Also, this driver has to call spin_unlock() to avoid spinlock recursion by this driver before calling usb_gadget_giveback_request(). Reported-by:
Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> Tested-by:
-
Bart Van Assche authored
commit d4acf365 upstream. The blk_mq_delay_kick_requeue_list() function is used by the device mapper and only by the device mapper to rerun the queue and requeue list after a delay. This function is called once per request that gets requeued. Modify this function such that the queue is run once per path change event instead of once per request that is requeued. Fixes: commit 2849450a ("blk-mq: introduce blk_mq_delay_kick_requeue_list()") Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Laurence Oberman <loberman@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Luis R. Rodriguez authored
commit 260d9f2f upstream. Commit 0cb64249 ("firmware_loader: abort request if wait_for_completion is interrupted") added via 4.0 added support to abort the fallback mechanism when a signal was detected and wait_for_completion_interruptible() returned -ERESTARTSYS -- for instance when a user hits CTRL-C. The abort was overly *too* effective. When a child process terminates (successful or not) the signal SIGCHLD can be sent to the parent process which ran the child in the background and later triggered a sync request for firmware through a sysfs interface which relies on the fallback mechanism. This signal in turn can be recieved by the interruptible wait we constructed on firmware_class and detects it as an abort *before* userspace could get a chance to write the firmware. Upon failure -EAGAIN is returned, so userspace is also kept in the dark about exactly what happened. We can reproduce the issue with the fw_fallback.sh selftest: Before this patch: $ sudo tools/testing/selftests/firmware/fw_fallback.sh ... tools/testing/selftests/firmware/fw_fallback.sh: error - sync firmware request cancelled due to SIGCHLD After this patch: $ sudo tools/testing/selftests/firmware/fw_fallback.sh ... tools/testing/selftests/firmware/fw_fallback.sh: SIGCHLD on sync ignored as expected Fix this by making the wait killable -- only killable by SIGKILL (kill -9). We loose the ability to allow userspace to cancel a write with CTRL-C (SIGINT), however its been decided the compromise to require SIGKILL is worth the gains. Chances of this issue occuring are low due to the number of drivers upstream exclusively relying on the fallback mechanism for firmware (2 drivers), however this is observed in the field with custom drivers with sysfs triggers to load firmware. Only distributions relying on the fallback mechanism are impacted as well. An example reported issue was on Android, as follows: 1) Android init (pid=1) fork()s (say pid=42) [this child process is totally unrelated to firmware loading, it could be sleep 2; for all we care ] 2) Android init (pid=1) does a write() on a (driver custom) sysfs file which ends up calling request_firmware() kernel side 3) The firmware loading fallback mechanism is used, the request is sent to userspace and pid 1 waits in the kernel on wait_* 4) before firmware loading completes pid 42 dies (for any reason, even normal termination) 5) Kernel delivers SIGCHLD to pid=1 to tell it a child has died, which causes -ERESTARTSYS to be returned from wait_* 6) The kernel's wait aborts and return -EAGAIN for the request_firmware() caller. Fixes: 0cb64249 ("firmware_loader: abort request if wait_for_completion is interrupted") Suggested-by:
"Eric W. Biederman" <ebiederm@xmission.com> Suggested-by:
Martin Fuzzey <mfuzzey@parkeon.com> Reported-by:
Luis R. Rodriguez <mcgrof@kernel.org> Signed-off-by:
-
Luis R. Rodriguez authored
commit 90d41e74 upstream. Fix batched requests from waiting forever on failure. The firmware API batched requests feature has been broken since the API call request_firmware_direct() was introduced on commit bba3a87e ("firmware: Introduce request_firmware_direct()"), added on v3.14 *iff* the firmware being requested was not present in *certain kernel builds* [0]. When no firmware is found the worker which goes on to finish never informs waiters queued up of this, so any batched request will stall in what seems to be forever (MAX_SCHEDULE_TIMEOUT). Sadly, a reboot will also stall, as the reboot notifier was only designed to kill custom fallback workers. The issue seems to the user as a type of soft lockup, what *actually* happens underneath the hood is a wait call which never completes as we failed to issue a completion on error. For device drivers with optional firmware schemes (ie, Intel iwlwifi, or Netronome -- even though it uses request_firmware() and not request_firmware_direct()), this could mean that when you boot a system with multiple cards the firmware will seem to never load on the system, or that the card is just not responsive even the driver initialization. Due to differences in scheduling possible this should not always trigger -- one would need to to ensure that multiple requests are in place at the right time for this to work, also release_firmware() must not be called prior to any other incoming request. The complexity may not be worth supporting batched requests in the future given the wait mechanism is only used also for the fallback mechanism. We'll keep it for now and just fix it. Its reported that at least with the Intel WiFi cards on one system this issue was creeping up 50% of the boots [0]. Before this commit batched requests testing revealed: ============================================================================ CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n CONFIG_FW_LOADER_USER_HELPER=y Most common Linux distribution setup. API-type no-firmware-found firmware-found ---------------------------------------------------------------------- request_firmware() FAIL OK request_firmware_direct() FAIL OK request_firmware_nowait(uevent=true) FAIL OK request_firmware_nowait(uevent=false) FAIL OK ============================================================================ CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n CONFIG_FW_LOADER_USER_HELPER=n Only possible if CONFIG_DELL_RBU=n and CONFIG_LEDS_LP55XX_COMMON=n, rare. API-type no-firmware-found firmware-found ---------------------------------------------------------------------- request_firmware() FAIL OK request_firmware_direct() FAIL OK request_firmware_nowait(uevent=true) FAIL OK request_firmware_nowait(uevent=false) FAIL OK ============================================================================ CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y CONFIG_FW_LOADER_USER_HELPER=y Google Android setup. API-type no-firmware-found firmware-found ---------------------------------------------------------------------- request_firmware() OK OK request_firmware_direct() FAIL OK request_firmware_nowait(uevent=true) OK OK request_firmware_nowait(uevent=false) OK OK ============================================================================ Ater this commit batched testing results: ============================================================================ CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n CONFIG_FW_LOADER_USER_HELPER=y Most common Linux distribution setup. API-type no-firmware-found firmware-found ---------------------------------------------------------------------- request_firmware() OK OK request_firmware_direct() OK OK request_firmware_nowait(uevent=true) OK OK request_firmware_nowait(uevent=false) OK OK ============================================================================ CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n CONFIG_FW_LOADER_USER_HELPER=n Only possible if CONFIG_DELL_RBU=n and CONFIG_LEDS_LP55XX_COMMON=n, rare. API-type no-firmware-found firmware-found ---------------------------------------------------------------------- request_firmware() OK OK request_firmware_direct() OK OK request_firmware_nowait(uevent=true) OK OK request_firmware_nowait(uevent=false) OK OK ============================================================================ CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y CONFIG_FW_LOADER_USER_HELPER=y Google Android setup. API-type no-firmware-found firmware-found ---------------------------------------------------------------------- request_firmware() OK OK request_firmware_direct() OK OK request_firmware_nowait(uevent=true) OK OK request_firmware_nowait(uevent=false) OK OK ============================================================================ [0] https://bugzilla.kernel.org/show_bug.cgi?id=195477 Fixes: bba3a87e ("firmware: Introduce request_firmware_direct()" Reported-by:
Nicolas <nbroeking@me.com> Reported-by:
John Ewalt <jewalt@lgsinnovations.com> Reported-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Luis R. Rodriguez authored
commit e44565f6 upstream. The firmware cache mechanism serves two purposes, the secondary purpose is not well documented nor understood. This fixes a regression with the secondary purpose of the firmware cache mechanism: batched requests on successful lookups. Without this fix *any* time a batched request is triggered, secondary requests for which the batched request mechanism was designed for will seem to last forver and seem to never return. This issue is present for all kernel builds possible, and a hard reset is required. The firmware cache is used for: 1) Addressing races with file lookups during the suspend/resume cycle by keeping firmware in memory during the suspend/resume cycle 2) Batched requests for the same file rely only on work from the first file lookup, which keeps the firmware in memory until the last release_firmware() is called Batched requests *only* take effect if secondary requests come in prior to the first user calling release_firmware(). The devres name used for the internal firmware cache is used as a hint other pending requests are ongoing, the firmware buffer data is kept in memory until the last user of the buffer calls release_firmware(), therefore serializing requests and delaying the release until all requests are done. Batched requests wait for a wakup or signal so we can rely on the first file fetch to write to the pending secondary requests. Commit 5b029624 ("firmware: do not use fw_lock for fw_state protection") ported the firmware API to use swait, and in doing so failed to convert complete_all() to swake_up_all() -- it used swake_up(), loosing the ability for *some* batched requests to take effect. We *could* fix this by just using swake_up_all() *but* swait is now known to be very special use case, so its best to just move away from it. So we just go back to using completions as before commit 5b029624 ("firmware: do not use fw_lock for fw_state protection") given this was using complete_all(). Without this fix it has been reported plugging in two Intel 6260 Wifi cards on a system will end up enumerating the two devices only 50% of the time [0]. The ported swake_up() should have actually handled the case with two devices, however, *if more than two cards are used* the swake_up() would not have sufficed. This change is only part of the required fixes for batched requests. Another fix is provided in the next patch. This particular change should fix the cases where more than three requests with the same firmware name is used, otherwise batched requests will wait for MAX_SCHEDULE_TIMEOUT and just timeout eventually. Below is a summary of tests triggering batched requests on different kernel builds. Before this patch: ============================================================================ CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n CONFIG_FW_LOADER_USER_HELPER=y Most common Linux distribution setup. API-type no-firmware-found firmware-found ---------------------------------------------------------------------- request_firmware() FAIL FAIL request_firmware_direct() FAIL FAIL request_firmware_nowait(uevent=true) FAIL FAIL request_firmware_nowait(uevent=false) FAIL FAIL ============================================================================ CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n CONFIG_FW_LOADER_USER_HELPER=n Only possible if CONFIG_DELL_RBU=n and CONFIG_LEDS_LP55XX_COMMON=n, rare. API-type no-firmware-found firmware-found ---------------------------------------------------------------------- request_firmware() FAIL FAIL request_firmware_direct() FAIL FAIL request_firmware_nowait(uevent=true) FAIL FAIL request_firmware_nowait(uevent=false) FAIL FAIL ============================================================================ CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y CONFIG_FW_LOADER_USER_HELPER=y Google Android setup. API-type no-firmware-found firmware-found ---------------------------------------------------------------------- request_firmware() FAIL FAIL request_firmware_direct() FAIL FAIL request_firmware_nowait(uevent=true) FAIL FAIL request_firmware_nowait(uevent=false) FAIL FAIL ============================================================================ After this patch: ============================================================================ CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n CONFIG_FW_LOADER_USER_HELPER=y Most common Linux distribution setup. API-type no-firmware-found firmware-found ---------------------------------------------------------------------- request_firmware() FAIL OK request_firmware_direct() FAIL OK request_firmware_nowait(uevent=true) FAIL OK request_firmware_nowait(uevent=false) FAIL OK ============================================================================ CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n CONFIG_FW_LOADER_USER_HELPER=n Only possible if CONFIG_DELL_RBU=n and CONFIG_LEDS_LP55XX_COMMON=n, rare. API-type no-firmware-found firmware-found ---------------------------------------------------------------------- request_firmware() FAIL OK request_firmware_direct() FAIL OK request_firmware_nowait(uevent=true) FAIL OK request_firmware_nowait(uevent=false) FAIL OK ============================================================================ CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y CONFIG_FW_LOADER_USER_HELPER=y Google Android setup. API-type no-firmware-found firmware-found ---------------------------------------------------------------------- request_firmware() OK OK request_firmware_direct() FAIL OK request_firmware_nowait(uevent=true) OK OK request_firmware_nowait(uevent=false) OK OK ============================================================================ [0] https://bugzilla.kernel.org/show_bug.cgi?id=195477 Cc: Ming Lei <ming.lei@redhat.com> Fixes: 5b029624 ("firmware: do not use fw_lock for fw_state protection") Reported-by:
-
Alan Swanson authored
commit 89f23d51 upstream. Similar to commit d595259f ("usb-storage: Add ignore-residue quirk for Initio INIC-3619") for INIC-3169 in unusual_devs.h but INIC-3069 already present in unusual_uas.h. Both in same controller IC family. Issue is that MakeMKV fails during key exchange with installed bluray drive with following error: 002004:0000 Error 'Scsi error - ILLEGAL REQUEST:COPY PROTECTION KEY EXCHANGE FAILURE - KEY NOT ESTABLISHED' occurred while issuing SCSI command AD010..080002400 to device 'SG:dev_11:0' Signed-off-by:
Alan Swanson <reiver@improbability.net> Acked-by:
Oliver Neukum <oneukum@suse.com> Signed-off-by:
-
Ian Abbott authored
commit cef98864 upstream. Comedi's read and write file operation handlers (`comedi_read()` and `comedi_write()`) currently call `copy_to_user()` or `copy_from_user()` whilst in the `TASK_INTERRUPTIBLE` state, which falls foul of the `might_fault()` checks when enabled. Fix it by setting the current task state back to `TASK_RUNNING` a bit earlier before calling these functions. Reported-by:
Piotr Gregor <piotrgregor@rsyncme.org> Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Hans de Goede authored
commit 631b010a upstream. Inheriting the ADC BIAS current settings from the BIOS instead of hardcoding then causes the AXP288 to disable charging (I think it mis-detects an overheated battery) on at least one model tablet. So lets go back to hard coding the values, this reverts commit fa2849e9 ("iio: adc: axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications"), fixing charging not working on the model tablet in question. The exact cause is not fully understood, hence the revert to a known working state. Reported-by:
Umberto Ixxo <sfumato1977@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Akinobu Mita authored
commit a3507e48 upstream. The TSL2563 driver provides three iio channels, two of which are raw ADC channels (channel 0 and channel 1) in the device and the remaining one is calculated by the two. The ADC channel 0 only supports programmable interrupt with threshold settings and this driver supports the event but the generated event code does not contain the corresponding iio channel type. This is going to change userspace ABI. Hopefully fixing this to be what it should always have been won't break any userspace code. Cc: Jonathan Cameron <jic23@kernel.org> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
