- 25 Jun, 2020 40 commits
-
-
Qiushi Wu authored
[ Upstream commit 25bf943e ] Function "pm_runtime_get_sync()" is not handled by "pm_runtime_put()" if "PTR_ERR(rst) == -EPROBE_DEFER". Fix this issue by adding "pm_runtime_put()" into this error path. Fixes: f65bb92c ("ASoC: img-i2s-in: Add runtime PM") Signed-off-by:
Qiushi Wu <wu000273@umn.edu> Link: https://lore.kernel.org/r/20200525055011.31925-1-wu000273@umn.eduSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Borislav Petkov authored
[ Upstream commit de308d18 ] The commit c84cb373 ("x86/apic: Move TSC deadline timer debug printk") removed the message which said that the deadline timer was enabled. It added a pr_debug() message which is issued when deadline timer validation succeeds. Well, issued only when CONFIG_DYNAMIC_DEBUG is enabled - otherwise pr_debug() calls get optimized away if DEBUG is not defined in the compilation unit. Therefore, make the above message pr_info() so that it is visible in dmesg. Signed-off-by:
Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/20200525104218.27018-1-bp@alien8.deSigned-off-by:
-
Potnuri Bharat Teja authored
[ Upstream commit 49ea0c03 ] Remove device specific debugfs entries immediately if LLD detaches a particular ULD device in case of fatal PCI errors. Link: https://lore.kernel.org/r/20200524190814.17599-1-bharat@chelsio.comSigned-off-by:
Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Pawel Laszczak authored
[ Upstream commit 5d363120 ] This patch adds new config_ep_by_speed_and_alt function which extends the config_ep_by_speed about alt parameter. This additional parameter allows to find proper usb_ss_ep_comp_descriptor. Problem has appeared during testing f_tcm (BOT/UAS) driver function. f_tcm function for SS use array of headers for both BOT/UAS alternate setting: static struct usb_descriptor_header *uasp_ss_function_desc[] = { (struct usb_descriptor_header *) &bot_intf_desc, (struct usb_descriptor_header *) &uasp_ss_bi_desc, (struct usb_descriptor_header *) &bot_bi_ep_comp_desc, (struct usb_descriptor_header *) &uasp_ss_bo_desc, (struct usb_descriptor_header *) &bot_bo_ep_comp_desc, (struct usb_descriptor_header *) &uasp_intf_desc, (struct usb_descriptor_header *) &uasp_ss_bi_desc, (struct usb_descriptor_header *) &uasp_bi_ep_comp_desc, (struct usb_descriptor_header *) &uasp_bi_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_bo_desc, (struct usb_descriptor_header *) &uasp_bo_ep_comp_desc, (struct usb_descriptor_header *) &uasp_bo_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_status_desc, (struct usb_descriptor_header *) &uasp_status_in_ep_comp_desc, (struct usb_descriptor_header *) &uasp_status_pipe_desc, (struct usb_descriptor_header *) &uasp_ss_cmd_desc, (struct usb_descriptor_header *) &uasp_cmd_comp_desc, (struct usb_descriptor_header *) &uasp_cmd_pipe_desc, NULL, }; The first 5 descriptors are associated with BOT alternate setting, and others are associated with UAS. During handling UAS alternate setting f_tcm driver invokes config_ep_by_speed and this function sets incorrect companion endpoint descriptor in usb_ep object. Instead setting ep->comp_desc to uasp_bi_ep_comp_desc function in this case set ep->comp_desc to uasp_ss_bi_desc. This is due to the fact that it searches endpoint based on endpoint address: for_each_ep_desc(speed_desc, d_spd) { chosen_desc = (struct usb_endpoint_descriptor *)*d_spd; if (chosen_desc->bEndpoitAddress == _ep->address) goto ep_found; } And in result it uses the descriptor from BOT alternate setting instead UAS. Finally, it causes that controller driver during enabling endpoints detect that just enabled endpoint for bot. Signed-off-by:
Jayshri Pawar <jpawar@cadence.com> Signed-off-by:
Pawel Laszczak <pawell@cadence.com> Signed-off-by:
Felipe Balbi <balbi@kernel.org> Signed-off-by:
-
Qiushi Wu authored
[ Upstream commit 44734a59 ] m66592_free_request() is called under label "err_add_udc" and "clean_up", and m66592->ep0_req is not set to NULL after first free, leading to a double-free. Fix this issue by setting m66592->ep0_req to NULL after the first free. Fixes: 0f91349b ("usb: gadget: convert all users to the new udc infrastructure") Signed-off-by:
-
Colin Ian King authored
[ Upstream commit eafa8004 ] Currently pointer ep is being dereferenced before it is null checked leading to a null pointer dereference issue. Fix this by only assigning pointer udc once ep is known to be not null. Also remove a debug message that requires a valid udc which may not be possible at that point. Addresses-Coverity: ("Dereference before null check") Fixes: 24a28e42 ("USB: gadget driver for LPC32xx") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 7a0fbcf7 ] Clang warns: drivers/usb/gadget/udc/s3c2410_udc.c:255:11: warning: comparison of address of 'ep->queue' equal to a null pointer is always false [-Wtautological-pointer-compare] if (&ep->queue == NULL) ~~~~^~~~~ ~~~~ 1 warning generated. It is not wrong, queue is not a pointer so if ep is not NULL, the address of queue cannot be NULL. No other driver does a check like this and this check has been around since the driver was first introduced, presumably with no issues so it does not seem like this check should be something else. Just remove it. Commit afe956c5 ("kbuild: Enable -Wtautological-compare") exposed this but it is not the root cause of the warning. Fixes: 3fc154b6 ("USB Gadget driver for Samsung s3c2410 ARM SoC") Link: https://github.com/ClangBuiltLinux/linux/issues/1004Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
-
Fabrice Gasnier authored
[ Upstream commit 8c935dea ] When the remote wakeup interrupt is triggered, lx_state is resumed from L2 to L0 state. But when the gadget resume is called, lx_state is still L2. This prevents the resume callback to queue any request. Any attempt to queue a request from resume callback will result in: - "submit request only in active state" debug message to be issued - dwc2_hsotg_ep_queue() returns -EAGAIN Call the gadget resume routine after the core is in L0 state. Fixes: f81f46e1 ("usb: dwc2: implement hibernation during bus suspend/resume") Acked-by:
Minas Harutyunyan <hminas@synopsys.com> Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by:
-
Stefan Riedmueller authored
[ Upstream commit a0948ddb ] There is actually no need to ping the watchdog before disabling it during timeout change. Disabling the watchdog already takes care of resetting the counter. This fixes an issue during boot when the userspace watchdog handler takes over and the watchdog is already running. Opening the watchdog in this case leads to the first ping and directly after that without the required heartbeat delay a second ping issued by the set_timeout call. Due to the missing delay this resulted in a reset. Signed-off-by:
Stefan Riedmueller <s.riedmueller@phytec.de> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Link: https://lore.kernel.org/r/20200403130728.39260-3-s.riedmueller@phytec.deSigned-off-by:
Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by:
-
Maor Gottlieb authored
[ Upstream commit 63a3345c ] The allocated ports structure in never freed. The free function should be called by release_cma_ports_group, but the group is never released since we don't remove its default group. Remove default groups when device group is deleted. Fixes: 045959db ("IB/cma: Add configfs for rdma_cm") Link: https://lore.kernel.org/r/20200521072650.567908-1-leon@kernel.orgSigned-off-by:
Maor Gottlieb <maorg@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Marc Zyngier authored
[ Upstream commit 0414b93e ] On a system that uses the internal DWC MSI widget, I get this warning from debugfs when CONFIG_GENERIC_IRQ_DEBUGFS is selected: debugfs: File ':soc:pcie@fc000000' in directory 'domains' already present! This is due to the fact that the DWC MSI code tries to register two IRQ domains for the same firmware node, without telling the low level code how to distinguish them (by setting a bus token). This further confuses debugfs which tries to create corresponding files for each domain. Fix it by tagging the inner domain as DOMAIN_BUS_NEXUS, which is the closest thing we have as to "generic MSI". Link: https://lore.kernel.org/r/20200501113921.366597-1-maz@kernel.orgSigned-off-by:
Marc Zyngier <maz@kernel.org> Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by:
Jingoo Han <jingoohan1@gmail.com> Signed-off-by:
-
Bjorn Helgaas authored
[ Upstream commit 7b38fd97 ] Except for Endpoints, we enable PTM at enumeration-time. Previously we did not account for the fact that Switch Downstream Ports are not permitted to have a PTM capability; their PTM behavior is controlled by the Upstream Port (PCIe r5.0, sec 7.9.16). Since Downstream Ports don't have a PTM capability, we did not mark them as "ptm_enabled", which meant that pci_enable_ptm() on an Endpoint failed because there was no PTM path to it. Mark Downstream Ports as "ptm_enabled" if their Upstream Port has PTM enabled. Fixes: eec097d4 ("PCI: Add pci_enable_ptm() for drivers to enable PTM on endpoints") Reported-by:
Aditya Paluri <Venkata.AdityaPaluri@synopsys.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Hannes Reinecke authored
[ Upstream commit 489dc0f0 ] The only case where dmz_get_zone_for_reclaim() cannot return a zone is if the respective lists are empty. So we should just return a simple NULL value here as we really don't have an error code which would make sense. Signed-off-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Qian Cai authored
[ Upstream commit c2e929b1 ] Booting a power9 server with hash MMU could trigger an undefined behaviour because pud_offset(p4d, 0) will do, 0 >> (PAGE_SHIFT:16 + PTE_INDEX_SIZE:8 + H_PMD_INDEX_SIZE:10) Fix it by converting pud_index() and friends to static inline functions. UBSAN: shift-out-of-bounds in arch/powerpc/mm/ptdump/ptdump.c:282:15 shift exponent 34 is too large for 32-bit type 'int' CPU: 6 PID: 1 Comm: swapper/0 Not tainted 5.6.0-rc4-next-20200303+ #13 Call Trace: dump_stack+0xf4/0x164 (unreliable) ubsan_epilogue+0x18/0x78 __ubsan_handle_shift_out_of_bounds+0x160/0x21c walk_pagetables+0x2cc/0x700 walk_pud at arch/powerpc/mm/ptdump/ptdump.c:282 (inlined by) walk_pagetables at arch/powerpc/mm/ptdump/ptdump.c:311 ptdump_check_wx+0x8c/0xf0 mark_rodata_ro+0x48/0x80 kernel_init+0x74/0x194 ret_from_kernel_thread+0x5c/0x74 Suggested-by:
Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Reviewed-by:
-
Jon Hunter authored
[ Upstream commit bba25915 ] The 'phy-mode' property is currently defined as 'rgmii' for Jetson Xavier. This indicates that the RGMII RX and TX delays are set by the MAC and the internal delays set by the PHY are not used. If the Marvell PHY driver is enabled, such that it is used and not the generic PHY, ethernet failures are seen (DHCP is failing to obtain an IP address) and this is caused because the Marvell PHY driver is disabling the internal RX and TX delays. For Jetson Xavier the internal PHY RX and TX delay should be used and so fix this by setting the 'phy-mode' to 'rgmii-id' and not 'rgmii'. Fixes: f89b58ce ("arm64: tegra: Add ethernet controller on Tegra194") Signed-off-by:
Jon Hunter <jonathanh@nvidia.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Bodo Stroesser authored
[ Upstream commit 61fb2482 ] When tcmu queues a new command - no matter whether in command ring or in qfull_queue - a cmd_id from IDR udev->commands is assigned to the command. If userspace sends a wrong command completion containing the cmd_id of a command on the qfull_queue, tcmu_handle_completions() finds the command in the IDR and calls tcmu_handle_completion() for it. This might do some nasty things because commands in qfull_queue do not have a valid dbi list. To fix this bug, we no longer add queued commands to the idr. Instead the cmd_id is assign when a command is written to the command ring. Due to this change I had to adapt the source code at several places where up to now an idr_for_each had been done. [mkp: fix checkpatch warnings] Link: https://lore.kernel.org/r/20200518164833.12775-1-bstroesser@ts.fujitsu.comAcked-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit 25bdae0f ] Mark the SCLK clock for Exynos5433 I2S1 device with IGNORE_UNUSED flag to match its behaviour with SCLK clock for AUD_I2S (I2S0) device until a proper fix for Exynos I2S driver is ready. This fixes the following synchronous abort issue revealed by the probe order change caused by the commit 93d2e432 ("of: platform: Batch fwnode parsing when adding all top level devices") Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 50 Comm: kworker/0:1 Not tainted 5.7.0-rc5+ #701 Hardware name: Samsung TM2E board (DT) Workqueue: events deferred_probe_work_func pstate: 60000005 (nZCv daif -PAN -UAO) pc : samsung_i2s_probe+0x768/0x8f0 lr : samsung_i2s_probe+0x688/0x8f0 ... Call trace: samsung_i2s_probe+0x768/0x8f0 platform_drv_probe+0x50/0xa8 really_probe+0x108/0x370 driver_probe_device+0x54/0xb8 __device_attach_driver+0x90/0xc0 bus_for_each_drv+0x70/0xc8 __device_attach+0xdc/0x140 device_initial_probe+0x10/0x18 bus_probe_device+0x94/0xa0 deferred_probe_work_func+0x70/0xa8 process_one_work+0x2a8/0x718 worker_thread+0x48/0x470 kthread+0x134/0x160 ret_from_fork+0x10/0x1c Code: 17ffffaf d503201f f94086c0 91003000 (88dffc00) ---[ end trace ccf721c9400ddbd6 ]--- Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Souptick Joarder authored
[ Upstream commit c9d7e3da ] Corrected error handling goto sequnece. Level put_pages should be called when pinned pages >= 0 && pinned != npages. Level free_pages should be called when pinned pages < 0. Fixes: fa8dda1e ("fpga: dfl: afu: add DFL_FPGA_PORT_DMA_MAP/UNMAP ioctls support") Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Acked-by:
Wu Hao <hao.wu@intel.com> Reviewed-by:
Xu Yilun <yilun.xu@intel.com> Link: https://lore.kernel.org/r/1589825991-3545-1-git-send-email-jrdr.linux@gmail.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Gregory CLEMENT authored
[ Upstream commit 4dd31f1f ] When submitting the previous fix "tty: n_gsm: Fix waking up upper tty layer when room available". It was suggested to switch from a while to a for loop, but when doing it, there was a remaining bogus i++. This patch removes this i++ and also reorganizes the code making it more compact. Fixes: e1eaea46 ("tty: n_gsm line discipline") Signed-off-by:
Gregory CLEMENT <gregory.clement@bootlin.com> Link: https://lore.kernel.org/r/20200518084517.2173242-3-gregory.clement@bootlin.comSigned-off-by:
-
Tang Bin authored
[ Upstream commit d4929202 ] The function ehci_mxc_drv_probe() does not perform sufficient error checking after executing platform_get_irq(), thus fix it. Fixes: 7e8d5cd9 ("USB: Add EHCI support for MX27 and MX31 based boards") Signed-off-by:
Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by:
Tang Bin <tangbin@cmss.chinamobile.com> Reviewed-by:
Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20200513132647.5456-1-tangbin@cmss.chinamobile.comSigned-off-by:
-
Hans de Goede authored
[ Upstream commit 0e0e10fd ] The Toshiba Encore WT8-A tablet almost fully works with the default settings for non-CR Bay Trail devices. The only problem is that its jack-detect switch is not inverted (it is active high instead of the normal active low). Add a quirk for this model using the default settings + BYT_RT5640_JD_NOT_INV. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200518072416.5348-1-hdegoede@redhat.comSigned-off-by:
-
Roy Spliet authored
[ Upstream commit e4337877 ] When allocation for mdp5_kms fails, calling mdp5_destroy() leads to undefined behaviour, likely a nullptr exception or use-after-free troubles. Signed-off-by:
Roy Spliet <nouveau@spliet.org> Reviewed-by:
Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by:
Rob Clark <robdclark@chromium.org> Signed-off-by:
-
Qais Yousef authored
[ Upstream commit 1cb3b009 ] The following warning was observed when attempting to suspend to disk using a USB flash as a swap device. [ 111.779649] ------------[ cut here ]------------ [ 111.788382] URB (____ptrval____) submitted while active [ 111.796646] WARNING: CPU: 3 PID: 365 at drivers/usb/core/urb.c:363 usb_submit_urb+0x3d8/0x590 [ 111.805417] Modules linked in: [ 111.808584] CPU: 3 PID: 365 Comm: kworker/3:2 Not tainted 5.6.0-rc6-00002-gdfd1731f9a3e-dirty #545 [ 111.817796] Hardware name: ARM Juno development board (r2) (DT) [ 111.823896] Workqueue: usb_hub_wq hub_event [ 111.828217] pstate: 60000005 (nZCv daif -PAN -UAO) [ 111.833156] pc : usb_submit_urb+0x3d8/0x590 [ 111.837471] lr : usb_submit_urb+0x3d8/0x590 [ 111.841783] sp : ffff800018de38b0 [ 111.845205] x29: ffff800018de38b0 x28: 0000000000000003 [ 111.850682] x27: ffff000970530b20 x26: ffff8000133fd000 [ 111.856159] x25: ffff8000133fd000 x24: ffff800018de3b38 [ 111.861635] x23: 0000000000000004 x22: 0000000000000c00 [ 111.867112] x21: 0000000000000000 x20: 00000000fffffff0 [ 111.872589] x19: ffff0009704e7a00 x18: ffffffffffffffff [ 111.878065] x17: 00000000a7c8f4bc x16: 000000002af33de8 [ 111.883542] x15: ffff8000133fda88 x14: 0720072007200720 [ 111.889019] x13: 0720072007200720 x12: 0720072007200720 [ 111.894496] x11: 0000000000000000 x10: 00000000a5286134 [ 111.899973] x9 : 0000000000000002 x8 : ffff000970c837a0 [ 111.905449] x7 : 0000000000000000 x6 : ffff800018de3570 [ 111.910926] x5 : 0000000000000001 x4 : 0000000000000003 [ 111.916401] x3 : 0000000000000000 x2 : ffff800013427118 [ 111.921879] x1 : 9d4e965b4b7d7c00 x0 : 0000000000000000 [ 111.927356] Call trace: [ 111.929892] usb_submit_urb+0x3d8/0x590 [ 111.933852] hub_activate+0x108/0x7f0 [ 111.937633] hub_resume+0xac/0x148 [ 111.941149] usb_resume_interface.isra.10+0x60/0x138 [ 111.946265] usb_resume_both+0xe4/0x140 [ 111.950225] usb_runtime_resume+0x24/0x30 [ 111.954365] __rpm_callback+0xdc/0x138 [ 111.958236] rpm_callback+0x34/0x98 [ 111.961841] rpm_resume+0x4a8/0x720 [ 111.965445] rpm_resume+0x50c/0x720 [ 111.969049] __pm_runtime_resume+0x4c/0xb8 [ 111.973276] usb_autopm_get_interface+0x28/0x60 [ 111.977948] hub_event+0x80/0x16d8 [ 111.981466] process_one_work+0x2a4/0x748 [ 111.985604] worker_thread+0x48/0x498 [ 111.989387] kthread+0x13c/0x140 [ 111.992725] ret_from_fork+0x10/0x18 [ 111.996415] irq event stamp: 354 [ 111.999756] hardirqs last enabled at (353): [<ffff80001019ea1c>] console_unlock+0x504/0x5b8 [ 112.008441] hardirqs last disabled at (354): [<ffff8000100a95d0>] do_debug_exception+0x1a8/0x258 [ 112.017479] softirqs last enabled at (350): [<ffff8000100818a4>] __do_softirq+0x4bc/0x568 [ 112.025984] softirqs last disabled at (343): [<ffff8000101145a4>] irq_exit+0x144/0x150 [ 112.034129] ---[ end trace dc96030b9cf6c8a3 ]--- The problem was tracked down to a missing call to pm_runtime_set_active() on resume in ohci-platform. Link: https://lore.kernel.org/lkml/20200323143857.db5zphxhq4hz3hmd@e107158-lin.cambridge.arm.com/Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Qais Yousef <qais.yousef@arm.com> CC: Tony Prisk <linux@prisktech.co.nz> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Mathias Nyman <mathias.nyman@intel.com> CC: Oliver Neukum <oneukum@suse.de> CC: linux-arm-kernel@lists.infradead.org CC: linux-usb@vger.kernel.org CC: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20200518154931.6144-1-qais.yousef@arm.comSigned-off-by:
-
Alex Williamson authored
[ Upstream commit bc138db1 ] The PCI Code and ID Assignment Specification changed capability ID 0 from reserved to a NULL capability in the v1.1 revision. The NULL capability is defined to include only the 16-bit capability header, ie. only the ID and next pointer. Unfortunately vfio-pci creates a map of config space, where ID 0 is used to reserve the standard type 0 header. Finding an actual capability with this ID therefore results in a bogus range marked in that map and conflicts with subsequent capabilities. As this seems to be a dummy capability anyway and we already support dropping capabilities, let's hide this one rather than delving into the potentially subtle dependencies within our map. Seen on an NVIDIA Tesla T4. Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Geoff Levand authored
[ Upstream commit 12655446 ] The ps3_mm_region_destroy() and ps3_mm_vas_destroy() routines are called very late in the shutdown via kexec's mmu_cleanup_all routine. By the time mmu_cleanup_all runs it is too late to use udbg_printf, and calling it will cause PS3 systems to hang. Remove all debugging statements from ps3_mm_region_destroy() and ps3_mm_vas_destroy() and replace any error reporting with calls to lv1_panic. With this change builds with 'DEBUG' defined will not cause kexec reboots to hang, and builds with 'DEBUG' defined or not will end in lv1_panic if an error is encountered. Signed-off-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
-
Nicholas Piggin authored
[ Upstream commit deb70f7a ] This was discovered developing qemu fwnmi sreset support. This off-by-one bug means the last 16 bytes of the rtas area can not be used for a 16 byte save area. It's not a serious bug, and QEMU implementation has to retain a workaround for old kernels, but it's good to tighten it. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.ibm.com> Link: https://lore.kernel.org/r/20200508043408.886394-7-npiggin@gmail.comSigned-off-by:
-
Feng Tang authored
[ Upstream commit 7c47a219 ] We met mulitple times of failure of staring bmc-watchdog, due to the runtime memory allocation failure of order 4. bmc-watchdog: page allocation failure: order:4, mode:0x40cc0(GFP_KERNEL|__GFP_COMP), nodemask=(null),cpuset=/,mems_allowed=0-1 CPU: 1 PID: 2571 Comm: bmc-watchdog Not tainted 5.5.0-00045-g7d6bb61d6188c #1 Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0015.110720180833 11/07/2018 Call Trace: dump_stack+0x66/0x8b warn_alloc+0xfe/0x160 __alloc_pages_slowpath+0xd3e/0xd80 __alloc_pages_nodemask+0x2f0/0x340 kmalloc_order+0x18/0x70 kmalloc_order_trace+0x1d/0xb0 ipmi_create_user+0x55/0x2c0 [ipmi_msghandler] ipmi_open+0x72/0x110 [ipmi_devintf] chrdev_open+0xcb/0x1e0 do_dentry_open+0x1ce/0x380 path_openat+0x305/0x14f0 do_filp_open+0x9b/0x110 do_sys_open+0x1bd/0x250 do_syscall_64+0x5b/0x1f0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Using vzalloc/vfree for creating ipmi_user heals the problem Thanks to Stephen Rothwell for finding the vmalloc.h inclusion issue. Signed-off-by:
Feng Tang <feng.tang@intel.com> Signed-off-by:
Corey Minyard <cminyard@mvista.com> Signed-off-by:
-
Cristian Klein authored
[ Upstream commit fb68ada8 ] The Trust Panora Graphic Tablet has two interfaces. Interface zero reports pen movement, pen pressure and pen buttons. Interface one reports tablet buttons and tablet scroll. Both use the mouse protocol. Without these quirks, libinput gets confused about what device it talks to. For completeness, here is the usbhid-dump: ``` $ sudo usbhid-dump -d 145f:0212 003:013:001:DESCRIPTOR 1588949402.559961 05 0D 09 01 A1 01 85 07 A1 02 09 00 75 08 95 07 81 02 C0 C0 09 0E A1 01 85 05 09 23 A1 02 09 52 09 53 25 0A 75 08 95 02 B1 02 C0 C0 05 0C 09 36 A1 00 85 06 05 09 19 01 29 20 15 00 25 01 95 20 75 01 81 02 C0 003:013:000:DESCRIPTOR 1588949402.563942 05 01 09 02 A1 01 85 08 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 05 81 01 05 01 09 30 09 31 09 38 09 00 15 81 25 7F 75 08 95 04 81 06 C0 C0 05 01 09 02 A1 01 85 09 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 05 81 01 05 01 09 30 09 31 26 FF 7F 95 02 75 10 81 02 05 0D 09 30 26 FF 03 95 01 75 10 81 02 C0 C0 05 01 09 00 A1 01 85 04 A1 00 26 FF 00 09 00 75 08 95 07 B1 02 C0 C0 ``` Signed-off-by:
Cristian Klein <cristian.klein@elastisys.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Gregory CLEMENT authored
[ Upstream commit 01dbb362 ] Warn the upper layer when n_gms is ready to receive data again. Without this the associated virtual tty remains blocked indefinitely. Fixes: e1eaea46 ("tty: n_gsm line discipline") Signed-off-by:
-
Gregory CLEMENT authored
[ Upstream commit 84d6f81c ] For at least some modems like the TELIT LE910, skipping SOF makes transfers blocking indefinitely after a short amount of data transferred. Given the small improvement provided by skipping the SOF (just one byte on about 100 bytes), it seems better to completely remove this "feature" than make it optional. Fixes: e1eaea46 ("tty: n_gsm line discipline") Signed-off-by:
-
Michael Ellerman authored
[ Upstream commit 7ffa8b7d ] Aneesh increased the size of struct pt_regs by 16 bytes and started seeing this WARN_ON: smp: Bringing up secondary CPUs ... ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at arch/powerpc/kernel/process.c:455 giveup_all+0xb4/0x110 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+ #318 NIP: c00000000001a2b4 LR: c00000000001a29c CTR: c0000000031d0000 REGS: c0000000026d3980 TRAP: 0700 Not tainted (5.7.0-rc2-gcc-8.2.0-1.g8f6a41f-default+) MSR: 800000000282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48048224 XER: 00000000 CFAR: c000000000019cc8 IRQMASK: 1 GPR00: c00000000001a264 c0000000026d3c20 c0000000026d7200 800000000280b033 GPR04: 0000000000000001 0000000000000000 0000000000000077 30206d7372203164 GPR08: 0000000000002000 0000000002002000 800000000280b033 3230303030303030 GPR12: 0000000000008800 c0000000031d0000 0000000000800050 0000000002000066 GPR16: 000000000309a1a0 000000000309a4b0 000000000309a2d8 000000000309a890 GPR20: 00000000030d0098 c00000000264da40 00000000fd620000 c0000000ff798080 GPR24: c00000000264edf0 c0000001007469f0 00000000fd620000 c0000000020e5e90 GPR28: c00000000264edf0 c00000000264d200 000000001db60000 c00000000264d200 NIP [c00000000001a2b4] giveup_all+0xb4/0x110 LR [c00000000001a29c] giveup_all+0x9c/0x110 Call Trace: [c0000000026d3c20] [c00000000001a264] giveup_all+0x64/0x110 (unreliable) [c0000000026d3c90] [c00000000001ae34] __switch_to+0x104/0x480 [c0000000026d3cf0] [c000000000e0b8a0] __schedule+0x320/0x970 [c0000000026d3dd0] [c000000000e0c518] schedule_idle+0x38/0x70 [c0000000026d3df0] [c00000000019c7c8] do_idle+0x248/0x3f0 [c0000000026d3e70] [c00000000019cbb8] cpu_startup_entry+0x38/0x40 [c0000000026d3ea0] [c000000000011bb0] rest_init+0xe0/0xf8 [c0000000026d3ed0] [c000000002004820] start_kernel+0x990/0x9e0 [c0000000026d3f90] [c00000000000c49c] start_here_common+0x1c/0x400 Which was unexpected. The warning is checking the thread.regs->msr value of the task we are switching from: usermsr = tsk->thread.regs->msr; ... WARN_ON((usermsr & MSR_VSX) && !((usermsr & MSR_FP) && (usermsr & MSR_VEC))); ie. if MSR_VSX is set then both of MSR_FP and MSR_VEC are also set. Dumping tsk->thread.regs->msr we see that it's: 0x1db60000 Which is not a normal looking MSR, in fact the only valid bit is MSR_VSX, all the other bits are reserved in the current definition of the MSR. We can see from the oops that it was swapper/0 that we were switching from when we hit the warning, ie. init_task. So its thread.regs points to the base (high addresses) in init_stack. Dumping the content of init_task->thread.regs, with the members of pt_regs annotated (the 16 bytes larger version), we see: 0000000000000000 c000000002780080 gpr[0] gpr[1] 0000000000000000 c000000002666008 gpr[2] gpr[3] c0000000026d3ed0 0000000000000078 gpr[4] gpr[5] c000000000011b68 c000000002780080 gpr[6] gpr[7] 0000000000000000 0000000000000000 gpr[8] gpr[9] c0000000026d3f90 0000800000002200 gpr[10] gpr[11] c000000002004820 c0000000026d7200 gpr[12] gpr[13] 000000001db60000 c0000000010aabe8 gpr[14] gpr[15] c0000000010aabe8 c0000000010aabe8 gpr[16] gpr[17] c00000000294d598 0000000000000000 gpr[18] gpr[19] 0000000000000000 0000000000001ff8 gpr[20] gpr[21] 0000000000000000 c00000000206d608 gpr[22] gpr[23] c00000000278e0cc 0000000000000000 gpr[24] gpr[25] 000000002fff0000 c000000000000000 gpr[26] gpr[27] 0000000002000000 0000000000000028 gpr[28] gpr[29] 000000001db60000 0000000004750000 gpr[30] gpr[31] 0000000002000000 000000001db60000 nip msr 0000000000000000 0000000000000000 orig_r3 ctr c00000000000c49c 0000000000000000 link xer 0000000000000000 0000000000000000 ccr softe 0000000000000000 0000000000000000 trap dar 0000000000000000 0000000000000000 dsisr result 0000000000000000 0000000000000000 ppr kuap 0000000000000000 0000000000000000 pad[2] pad[3] This looks suspiciously like stack frames, not a pt_regs. If we look closely we can see return addresses from the stack trace above, c000000002004820 (start_kernel) and c00000000000c49c (start_here_common). init_task->thread.regs is setup at build time in processor.h: #define INIT_THREAD { \ .ksp = INIT_SP, \ .regs = (struct pt_regs *)INIT_SP - 1, /* XXX bogus, I think */ \ The early boot code where we setup the initial stack is: LOAD_REG_ADDR(r3,init_thread_union) /* set up a stack pointer */ LOAD_REG_IMMEDIATE(r1,THREAD_SIZE) add r1,r3,r1 li r0,0 stdu r0,-STACK_FRAME_OVERHEAD(r1) Which creates a stack frame of size 112 bytes (STACK_FRAME_OVERHEAD). Which is far too small to contain a pt_regs. So the result is init_task->thread.regs is pointing at some stack frames on the init stack, not at a pt_regs. We have gotten away with this for so long because with pt_regs at its current size the MSR happens to point into the first frame, at a location that is not written to by the early asm. With the 16 byte expansion the MSR falls into the second frame, which is used by the compiler, and collides with a saved register that tends to be non-zero. As far as I can see this has been wrong since the original merge of 64-bit ppc support, back in 2002. Conceptually swapper should have no regs, it never entered from userspace, and in fact that's what we do on 32-bit. It's also presumably what the "bogus" comment is referring to. So I think the right fix is to just not-initialise regs at all. I'm slightly worried this will break some code that isn't prepared for a NULL regs, but we'll have to see. Remove the comment in head_64.S which refers to us setting up the regs (even though we never did), and is otherwise not really accurate any more. Reported-by:
Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by:
-
Rob Herring authored
[ Upstream commit 1b54ae83 ] If device_register() has an error, we should bail out of pci_register_host_bridge() rather than continuing on. Fixes: 37d6a0a6 ("PCI: Add pci_register_host_bridge() interface") Link: https://lore.kernel.org/r/20200513223859.11295-1-robh@kernel.orgSigned-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Tero Kristo authored
[ Upstream commit c7c1cbbc ] The parent_names is never released for a component clock definition, causing some memory leak. Fix by releasing it once it is no longer needed. Reported-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
Tero Kristo <t-kristo@ti.com> Link: https://lkml.kernel.org/r/20200429131341.4697-2-t-kristo@ti.comAcked-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit fe204591 ] Building a kernel with clang sometimes fails with an objtool error in dlm: fs/dlm/lock.o: warning: objtool: revert_lock_pc()+0xbd: can't find jump dest instruction at .text+0xd7fc The problem is that BUG() never returns and the compiler knows that anything after it is unreachable, however the panic still emits some code that does not get fully eliminated. Having both BUG() and panic() is really pointless as the BUG() kills the current process and the subsequent panic() never hits. In most cases, we probably don't really want either and should replace the DLM_ASSERT() statements with WARN_ON(), as has been done for some of them. Remove the BUG() here so the user at least sees the panic message and we can reliably build randconfig kernels. Fixes: e7fd4179 ("[DLM] The core of the DLM for GFS2/CLVM") Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: clang-built-linux@googlegroups.com Signed-off-by:
David Teigland <teigland@redhat.com> Signed-off-by:
-
Dafna Hirschfeld authored
[ Upstream commit d7faa8ff ] In function rockchip_dt_node_to_map, a new_map variable is allocated by: new_map = devm_kcalloc(pctldev->dev, map_num, sizeof(*new_map), GFP_KERNEL); This uses devres and attaches new_map to the pinctrl driver. This cause a leak since new_map is not released when the probed driver is removed. Fix it by using kcalloc to allocate new_map and free it in `rockchip_dt_free_map` Signed-off-by:
Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by:
Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20200506100903.15420-1-dafna.hirschfeld@collabora.comSigned-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Suganath Prabu S authored
[ Upstream commit cbbfdb2a ] Fix following warning from Smatch static analyser: drivers/scsi/mpt3sas/mpt3sas_base.c:5256 _base_allocate_memory_pools() warn: 'ioc->hpr_lookup' double freed drivers/scsi/mpt3sas/mpt3sas_base.c:5256 _base_allocate_memory_pools() warn: 'ioc->internal_lookup' double freed Link: https://lore.kernel.org/r/20200508110738.30732-1-suganath-prabu.subramani@broadcom.comReported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by:
-
Dmitry Osipenko authored
[ Upstream commit c32ea07a ] Fix failure when USB cable is connected: smb347 2-006a: reading IRQSTAT_D failed Fixes: 1502cfe1 ("smb347-charger: Fix battery status reporting logic for charger faults") Tested-by:
David Heidelberg <david@ixit.cz> Signed-off-by:
Dmitry Osipenko <digetx@gmail.com> Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by:
-
Christophe JAILLET authored
[ Upstream commit 934ed384 ] In the probe function, in case of error, resources allocated in 'lp8788_setup_adc_channel()' must be released. This can be achieved easily by using the devm_ variant of 'iio_channel_get()'. This has the extra benefit to simplify the remove function and to axe the 'lp8788_release_adc_channel()' function which is now useless. Fixes: 98a27664 ("power_supply: Add new lp8788 charger driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Viacheslav Dubeyko authored
[ Upstream commit f839544c ] Currently, FC target reset finishes with the warning message: [84010.596893] ------------[ cut here ]------------ [84010.596917] WARNING: CPU: 238 PID: 279973 at ../drivers/scsi/qla2xxx/qla_target.c:6644 qlt_enable_vha+0x1d0/0x260 [qla2xxx] [84010.596918] Modules linked in: vrf af_packet 8021q garp mrp stp llc netlink_diag target_tatlin_tblock(OEX) dm_ec(OEX) ttln_rdma(OEX) dm_frontend(OEX) nvme_rdma nvmet tcm_qla2xxx iscsi_target_mod target_core_mod at24 nvmem_core pnv_php ipmi_watchdog ipmi_ssif vmx_crypto gf128mul crct10dif_vpmsum qla2xxx rpcrdma nvme_fc powernv_flash(X) nvme_fabrics uio_pdrv_genirq mtd rtc_opal(X) ibmpowernv(X) opal_prd(X) uio scsi_transport_fc i2c_opal(X) ses enclosure ipmi_poweroff ast i2c_algo_bit ttm bmc_mcu(OEX) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm drm_panel_orientation_quirks agpgart nfsd auth_rpcgss nfs_acl ipmi_powernv(X) lockd ipmi_devintf ipmi_msghandler grace dummy ext4 crc16 jbd2 mbcache sd_mod rdma_ucm ib_iser rdma_cm ib_umad iw_cm ib_ipoib libiscsi scsi_transport_iscsi ib_cm [84010.596975] configfs mlx5_ib ib_uverbs ib_core mlx5_core crc32c_vpmsum xhci_pci xhci_hcd mpt3sas(OEX) tg3 usbcore mlxfw tls raid_class libphy scsi_transport_sas devlink ptp pps_core nvme nvme_core sunrpc dm_mirror dm_region_hash dm_log sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4 [84010.597001] Supported: Yes, External [84010.597004] CPU: 238 PID: 279973 Comm: bash Tainted: G OE 4.12.14-197.29-default #1 SLE15-SP1 [84010.597006] task: c000000a104c0000 task.stack: c000000b52188000 [84010.597007] NIP: d00000001ffd7f78 LR: d00000001ffd7f6c CTR: c0000000001676c0 [84010.597008] REGS: c000000b5218b910 TRAP: 0700 Tainted: G OE (4.12.14-197.29-default) [84010.597008] MSR: 900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> [84010.597015] CR: 48242424 XER: 00000000 [84010.597016] CFAR: d00000001ff45d08 SOFTE: 1 GPR00: d00000001ffd7f6c c000000b5218bb90 d00000002001b228 0000000000000102 GPR04: 0000000000000001 0000000000000001 00013d91ed0a5e2d 0000000000000000 GPR08: c000000007793300 0000000000000000 0000000000000000 c000000a086e7818 GPR12: 0000000000002200 c000000007793300 0000000000000000 000000012bc937c0 GPR16: 000000012bbf7ed0 0000000000000000 000000012bc3dd10 0000000000000000 GPR20: 000000012bc4db28 0000010036442810 000000012bc97828 000000012bc96c70 GPR24: 00000100365b1550 0000000000000000 00000100363f3d80 c000000be20d3080 GPR28: c000000bda7eae00 c000000be20db7e8 c000000be20d3778 c000000be20db7e8 [84010.597042] NIP [d00000001ffd7f78] qlt_enable_vha+0x1d0/0x260 [qla2xxx] [84010.597051] LR [d00000001ffd7f6c] qlt_enable_vha+0x1c4/0x260 [qla2xxx] [84010.597051] Call Trace: [84010.597061] [c000000b5218bb90] [d00000001ffd7f6c] qlt_enable_vha+0x1c4/0x260 [qla2xxx] (unreliable) [84010.597064] [c000000b5218bc20] [d000000009820b6c] tcm_qla2xxx_tpg_enable_store+0xc4/0x130 [tcm_qla2xxx] [84010.597067] [c000000b5218bcb0] [d0000000185d0e68] configfs_write_file+0xd0/0x190 [configfs] [84010.597072] [c000000b5218bd00] [c0000000003d0edc] __vfs_write+0x3c/0x1e0 [84010.597074] [c000000b5218bd90] [c0000000003d2ea8] vfs_write+0xd8/0x220 [84010.597076] [c000000b5218bde0] [c0000000003d4ddc] SyS_write+0x6c/0x110 [84010.597079] [c000000b5218be30] [c00000000000b188] system_call+0x3c/0x130 [84010.597080] Instruction dump: [84010.597082] 7d0050a8 7d084b78 7d0051ad 40c2fff4 7fa3eb78 4bf73965 60000000 7fa3eb78 [84010.597086] 4bf6dcd9 60000000 2fa30000 419eff40 <0fe00000> 4bffff38 e95f0058 a12a0180 [84010.597090] ---[ end trace e32abaf6e6fee826 ]--- To reproduce: echo 0x7fffffff > /sys/module/qla2xxx/parameters/logging modprobe target_core_mod modprobe tcm_qla2xxx mkdir /sys/kernel/config/target/qla2xxx mkdir /sys/kernel/config/target/qla2xxx/<port-name> mkdir /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1 echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable echo 0 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable echo 1 > /sys/kernel/config/target/qla2xxx/<port-name>/tpgt_1/enable SYSTEM START kernel: pid 327:drivers/scsi/qla2xxx/qla_init.c:2174 qla2x00_initialize_adapter(): vha->flags.online 0x0 <...> kernel: pid 327:drivers/scsi/qla2xxx/qla_os.c:3444 qla2x00_probe_one(): vha->flags.online 0x1 echo 1 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:86:a6:2a/tpgt_1/enable kernel: pid 348:drivers/scsi/qla2xxx/qla_init.c:6641 qla2x00_abort_isp_cleanup(): vha->flags.online 0x0, ISP_ABORT_NEEDED 0x0 <...> kernel: pid 348:drivers/scsi/qla2xxx/qla_init.c:6998 qla2x00_restart_isp(): vha->flags.online 0x0 echo 0 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:86:a6:2a/tpgt_1/enable kernel: pid 348:drivers/scsi/qla2xxx/qla_init.c:6641 qla2x00_abort_isp_cleanup(): vha->flags.online 0x0, ISP_ABORT_NEEDED 0x0 <...> kernel: pid 1404:drivers/scsi/qla2xxx/qla_os.c:1107 qla2x00_wait_for_hba_online(): base_vha->flags.online 0x0 echo 1 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:86:a6:2a/tpgt_1/enable kernel: pid 1404:drivers/scsi/qla2xxx/qla_os.c:1107 qla2x00_wait_for_hba_online(): base_vha->flags.online 0x0 kernel: -----------[ cut here ]----------- kernel: WARNING: CPU: 1 PID: 1404 at drivers/scsi/qla2xxx/qla_target.c:6654 qlt_enable_vha+0x1e0/0x280 [qla2xxx] The issue happens because no real ISP reset is executed. The qla2x00_abort_isp(scsi_qla_host_t *vha) function expects that vha->flags.online will be not zero for ISP reset procedure. This patch sets vha->flags.online to 1 before calling ->abort_isp() for starting the ISP reset. Link: https://lore.kernel.org/r/1d7b21bf9f7676643239eb3d60eaca7cfa505cf0.camel@yadro.comReviewed-by:
Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by:
Viacheslav Dubeyko <v.dubeiko@yadro.com> Signed-off-by:
-
Kai-Heng Feng authored
[ Upstream commit 66ff14e5 ] 7d715a6c ("PCI: add PCI Express ASPM support") added the ability for Linux to enable ASPM, but for some undocumented reason, it didn't enable ASPM on links where the downstream component is a PCIe-to-PCI/PCI-X Bridge. Remove this exclusion so we can enable ASPM on these links. The Dell OptiPlex 7080 mentioned in the bugzilla has a TI XIO2001 PCIe-to-PCI Bridge. Enabling ASPM on the link leading to it allows the Intel SoC to enter deeper Package C-states, which is a significant power savings. [bhelgaas: commit log] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207571 Link: https://lore.kernel.org/r/20200505173423.26968-1-kai.heng.feng@canonical.comSigned-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
