- 19 Nov, 2020 6 commits
-
-
Karsten Graul authored
With the multi-subnet support of SMC-Dv2 the match for existing link groups should not include the vlanid of the network device. Set ini->smcd_version accordingly before the call to smc_conn_create() and use this value in smc_conn_create() to skip the vlanid check. Fixes: 5c21c4cc ("net/smc: determine accepted ISM devices") Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Georg Kohmann authored
IPV6=m NF_DEFRAG_IPV6=y ld: net/ipv6/netfilter/nf_conntrack_reasm.o: in function `nf_ct_frag6_gather': net/ipv6/netfilter/nf_conntrack_reasm.c:462: undefined reference to `ipv6_frag_thdr_truncated' Netfilter is depending on ipv6 symbol ipv6_frag_thdr_truncated. This dependency is forcing IPV6=y. Remove this dependency by moving ipv6_frag_thdr_truncated out of ipv6. This is the same solution as used with a similar issues: Referring to commit 70b095c8 ("ipv6: remove dependency of nf_defrag_ipv6 on ipv6 module") Fixes: 9d9e937b ("ipv6/netfilter: Discard first fragment not including all headers") Reported-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Georg Kohmann <geokohma@cisco.com> Acked-by:
Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Link: https://lore.kernel.org/r/20201119095833.8409-1-geokohma@cisco.comSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-5.10-20201118' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2020-11-18 Jimmy Assarsson provides two patches for the kvaser_pciefd and kvaser_usb drivers, where the can_bittiming_const are fixed. The next patch is by me and fixes an erroneous flexcan_transceiver_enable() during bus-off recovery in the flexcan driver. Jarkko Nikula's patch for the m_can driver fixes the IRQ handler to only process the interrupts if the device is not suspended. * tag 'linux-can-fixes-for-5.10-20201118' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: m_can: process interrupt only when not runtime suspended can: flexcan: flexcan_chip_start(): fix erroneous flexcan_transceiver_enable() during bus-off recovery can: kvaser_usb: kvaser_usb_hydra: Fix KCAN bittiming limits can: kvaser_pciefd: Fix KCAN bittiming limits ==================== Link: https://lore.kernel.org/r/20201118160414.2731659-1-mkl@pengutronix.deSigned-off-by:
-
Aya Levin authored
Slave function read the following capabilities from the wrong offset: 1. log_mc_entry_sz 2. fs_log_entry_sz 3. log_mc_hash_sz Fix that by adjusting these capabilities offset to match firmware layout. Due to the wrong offset read, the following issues might occur: 1+2. Negative value reported at max_mcast_qp_attach. 3. Driver to init FW with multicast hash size of zero. Fixes: a40ded60 ("net/mlx4_core: Add masking for a few queries on HCA caps") Signed-off-by:
Aya Levin <ayal@nvidia.com> Reviewed-by:
Moshe Shemesh <moshe@nvidia.com> Reviewed-by:
Eran Ben Elisha <eranbe@nvidia.com> Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20201118081922.553-1-tariqt@nvidia.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5 fixes 2020-11-17 This series introduces some fixes to mlx5 driver. * tag 'mlx5-fixes-2020-11-17' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: fix error return code in mlx5e_tc_nic_init() net/mlx5: E-Switch, Fail mlx5_esw_modify_vport_rate if qos disabled net/mlx5: Disable QoS when min_rates on all VFs are zero net/mlx5: Clear bw_share upon VF disable net/mlx5: Add handling of port type in rule deletion net/mlx5e: Fix check if netdev is bond slave net/mlx5e: Fix IPsec packet drop by mlx5e_tc_update_skb net/mlx5e: Set IPsec WAs only in IP's non checksum partial case. net/mlx5e: Fix refcount leak on kTLS RX resync ==================== Link: https://lore.kernel.org/r/20201117195702.386113-1-saeedm@nvidia.comSigned-off-by:
-
Sebastian Andrzej Siewior authored
The `skb' is mapped for DMA in ns_send() but does not unmap DMA in case push_scqe() fails to submit the `skb'. The memory of the `skb' is released so only the DMA mapping is leaking. Unmap the DMA mapping in case push_scqe() failed. Fixes: 864a3ff6 ("atm: [nicstar] remove virt_to_bus() and support 64-bit platforms") Cc: Chas Williams <3chas3@gmail.com> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
- 18 Nov, 2020 17 commits
-
-
Dongli Zhang authored
The ethernet driver may allocate skb (and skb->data) via napi_alloc_skb(). This ends up to page_frag_alloc() to allocate skb->data from page_frag_cache->va. During the memory pressure, page_frag_cache->va may be allocated as pfmemalloc page. As a result, the skb->pfmemalloc is always true as skb->data is from page_frag_cache->va. The skb will be dropped if the sock (receiver) does not have SOCK_MEMALLOC. This is expected behaviour under memory pressure. However, once kernel is not under memory pressure any longer (suppose large amount of memory pages are just reclaimed), the page_frag_alloc() may still re-use the prior pfmemalloc page_frag_cache->va to allocate skb->data. As a result, the skb->pfmemalloc is always true unless page_frag_cache->va is re-allocated, even if the kernel is not under memory pressure any longer. Here is how kernel runs into issue. 1. The kernel is under memory pressure and allocation of PAGE_FRAG_CACHE_MAX_ORDER in __page_frag_cache_refill() will fail. Instead, the pfmemalloc page is allocated for page_frag_cache->va. 2: All skb->data from page_frag_cache->va (pfmemalloc) will have skb->pfmemalloc=true. The skb will always be dropped by sock without SOCK_MEMALLOC. This is an expected behaviour. 3. Suppose a large amount of pages are reclaimed and kernel is not under memory pressure any longer. We expect skb->pfmemalloc drop will not happen. 4. Unfortunately, page_frag_alloc() does not proactively re-allocate page_frag_alloc->va and will always re-use the prior pfmemalloc page. The skb->pfmemalloc is always true even kernel is not under memory pressure any longer. Fix this by freeing and re-allocating the page instead of recycling it. References: https://lore.kernel.org/lkml/20201103193239.1807-1-dongli.zhang@oracle.com/ References: https://lore.kernel.org/linux-mm/20201105042140.5253-1-willy@infradead.org/Suggested-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Aruna Ramakrishna <aruna.ramakrishna@oracle.com> Cc: Bert Barbe <bert.barbe@oracle.com> Cc: Rama Nichanamatlu <rama.nichanamatlu@oracle.com> Cc: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Cc: Manjunath Patil <manjunath.b.patil@oracle.com> Cc: Joe Jin <joe.jin@oracle.com> Cc: SRINIVAS <srinivas.eeda@oracle.com> Fixes: 79930f58 ("net: do not deplete pfmemalloc reserve") Signed-off-by:
Dongli Zhang <dongli.zhang@oracle.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201115201029.11903-1-dongli.zhang@oracle.comSigned-off-by:
-
Andrew Lunn authored
When the switch is hardware reset, it reads the contents of the EEPROM. This can contain instructions for programming values into registers and to perform waits between such programming. Reading the EEPROM can take longer than the 100ms mv88e6xxx_hardware_reset() waits after deasserting the reset GPIO. So poll the EEPROM done bit to ensure it is complete. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Ruslan Sushko <rus@sushko.dev> Link: https://lore.kernel.org/r/20201116164301.977661-1-rus@sushko.devSigned-off-by:
-
Jakub Kicinski authored
Ido Schimmel says: ==================== mlxsw: Couple of fixes Patch #1 fixes firmware flashing when CONFIG_MLXSW_CORE=y and CONFIG_MLXFW=m. Patch #2 prevents EMAD transactions from needlessly failing when the system is under heavy load by using exponential backoff. Please consider patch #2 for stable. ==================== Link: https://lore.kernel.org/r/20201117173352.288491-1-idosch@idosch.orgSigned-off-by:
-
Ido Schimmel authored
The driver sends Ethernet Management Datagram (EMAD) packets to the device for configuration purposes and waits for up to 200ms for a reply. A request is retried up to 5 times. When the system is under heavy load, replies are not always processed in time and EMAD transactions fail. Make the process more robust to such delays by using exponential backoff. First wait for up to 200ms, then retransmit and wait for up to 400ms and so on. Fixes: caf7297e ("mlxsw: core: Introduce support for asynchronous EMAD register access") Reported-by:
Denis Yulevich <denisyu@nvidia.com> Tested-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
-
Ido Schimmel authored
The commit cited below moved firmware flashing functionality from mlxsw_spectrum to mlxsw_core, but did not adjust the Kconfig dependencies. This makes it possible to have mlxsw_core as built-in and mlxfw as a module. The mlxfw code is therefore not reachable from mlxsw_core and firmware flashing fails: # devlink dev flash pci/0000:01:00.0 file mellanox/mlxsw_spectrum-13.2008.1310.mfa2 devlink answers: Operation not supported Fix by having mlxsw_core select mlxfw. Fixes: b79cb787 ("mlxsw: Move fw flashing code into core.c") Signed-off-by:
Vadim Pasternak <vadimp@nvidia.com> Tested-by:
-
Florian Fainelli authored
DSA network devices rely on having their DSA management interface up and running otherwise their ndo_open() will return -ENETDOWN. Without doing this it would not be possible to use DSA devices as netconsole when configured on the command line. These devices also do not utilize the upper/lower linking so the check about the netpoll device having upper is not going to be a problem. The solution adopted here is identical to the one done for net/ipv4/ipconfig.c with 728c0208 ("net: ipv4: handle DSA enabled master network devices"), with the network namespace scope being restricted to that of the process configuring netpoll. Fixes: 04ff53f9 ("net: dsa: Add netconsole support") Tested-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201117035236.22658-1-f.fainelli@gmail.comSigned-off-by:
-
Zhang Changzhong authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: a6a53252 ("atl1e: Atheros L1E Gigabit Ethernet driver") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1605581875-36281-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by:
-
Zhang Changzhong authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 43250ddd ("atl1c: Atheros L1C Gigabit Ethernet driver") Reported-by:
-
Zhang Changzhong authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
-
Filip Moc authored
LTE module MR400 embedded in TL-MR6400 v4 requires DTR to be set. Signed-off-by:
Filip Moc <dev@moc6.cz> Acked-by:
Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20201117173631.GA550981@moc6.czSigned-off-by:
-
Jarkko Nikula authored
Avoid processing bogus interrupt statuses when the HW is runtime suspended and the M_CAN_IR register read may get all bits 1's. Handler can be called if the interrupt request is shared with other peripherals or at the end of free_irq(). Therefore check the runtime suspended status before processing. Fixes: cdf8259d ("can: m_can: Add PM Support") Signed-off-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/r/20200915134715.696303-1-jarkko.nikula@linux.intel.comSigned-off-by:
Marc Kleine-Budde <mkl@pengutronix.de>
-
Marc Kleine-Budde authored
can: flexcan: flexcan_chip_start(): fix erroneous flexcan_transceiver_enable() during bus-off recovery If the CAN controller goes into bus off, the do_set_mode() callback with CAN_MODE_START can be used to recover the controller, which then calls flexcan_chip_start(). If configured, this is done automatically by the framework or manually by the user. In flexcan_chip_start() there is an explicit call to flexcan_transceiver_enable(), which does a regulator_enable() on the transceiver regulator. This results in a net usage counter increase, as there is no corresponding flexcan_transceiver_disable() in the bus off code path. This further leads to the transceiver stuck enabled, even if the CAN interface is shut down. To fix this problem the flexcan_transceiver_enable()/flexcan_transceiver_disable() are moved out of flexcan_chip_start()/flexcan_chip_stop() into flexcan_open()/flexcan_close(). Fixes: e955cead ("CAN: Add Flexcan CAN controller driver") Link: https://lore.kernel.org/r/20201118150148.2664024-1-mkl@pengutronix.deSigned-off-by:
-
Jimmy Assarsson authored
Use correct bittiming limits for the KCAN CAN controller. Fixes: aec5fb22 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Signed-off-by:
Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20201115163027.16851-2-jimmyassarsson@gmail.comSigned-off-by:
-
Jimmy Assarsson authored
Use correct bittiming limits for the KCAN CAN controller. Fixes: 26ad340e ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Signed-off-by:
-
Florian Klink authored
Checking for ifdef CONFIG_x fails if CONFIG_x=m. Use IS_ENABLED instead, which is true for both built-ins and modules. Otherwise, a > ip -4 route add 1.2.3.4/32 via inet6 fe80::2 dev eth1 fails with the message "Error: IPv6 support not enabled in kernel." if CONFIG_IPV6 is `m`. In the spirit of b8127113. Fixes: d1566268 ("ipv4: Allow ipv6 gateway with ipv4 routes") Cc: Kim Phillips <kim.phillips@arm.com> Signed-off-by:
Florian Klink <flokli@flokli.de> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20201115224509.2020651-1-flokli@flokli.deSigned-off-by:
-
Dmitry Bogdanov authored
The code refactoring of ILT configuration was not complete, the old unused variables were used for the SRC block. That could lead to the memory corruption by HW when rx filters are configured. This patch completes that refactoring. Fixes: 8a52bbab (qed: Debug feature: ilt and mdump) Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
Dmitry Bogdanov <dbogdanov@marvell.com> Link: https://lore.kernel.org/r/20201116132944.2055-1-dbogdanov@marvell.comSigned-off-by:
-
Wang Hai authored
nlmsg_cancel() needs to be called in the error path of inet_req_diag_fill to cancel the message. Fixes: d545caca ("net: inet: diag: expose the socket mark to privileged processes.") Reported-by:
Wang Hai <wanghai38@huawei.com> Link: https://lore.kernel.org/r/20201116082018.16496-1-wanghai38@huawei.comSigned-off-by:
-
- 17 Nov, 2020 17 commits
-
-
Tariq Toukan authored
In async_resync mode, we log the TCP seq of records until the async request is completed. Later, in case one of the logged seqs matches the resync request, we return it, together with its record serial number. Before this fix, we mistakenly returned the serial number of the current record instead. Fixes: ed9b7646 ("net/tls: Add asynchronous resync") Signed-off-by:
Boris Pismenny <borisp@nvidia.com> Link: https://lore.kernel.org/r/20201115131448.2702-1-tariqt@nvidia.comSigned-off-by:
-
Taehee Yoo authored
If THIS_MODULE is not set, the module would be removed while debugfs is being used. It eventually makes kernel panic. Fixes: 82c93a87 ("netdevsim: implement couple of testing devlink health reporters") Fixes: 424be63a ("netdevsim: add UDP tunnel port offload support") Fixes: 4418f862 ("netdevsim: implement support for devlink region and snapshots") Fixes: d3cbb907 ("netdevsim: add ACL trap reporting cookie as a metadata") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20201115103041.30701-1-ap420073@gmail.comSigned-off-by:
-
Alex Marginean authored
Due to a hardware issue, an access to MDIO registers that is concurrent with other ENETC register accesses may lead to the MDIO access being dropped or corrupted. The workaround introduces locking for all register accesses to the ENETC register space. To reduce performance impact, a readers-writers locking scheme has been implemented. The writer in this case is the MDIO access code (irrelevant whether that MDIO access is a register read or write), and the reader is any access code to non-MDIO ENETC registers. Also, the datapath functions acquire the read lock fewer times and use _hot accessors. All the rest of the code uses the _wa accessors which lock every register access. The commit introducing MDIO support is - commit ebfcb23d ("enetc: Add ENETC PF level external MDIO support") but due to subsequent refactoring this patch is applicable on top of a later commit. Fixes: 6517798d ("enetc: Make MDIO accessors more generic and export to include/linux/fsl") Signed-off-by:
Alex Marginean <alexandru.marginean@nxp.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Link: https://lore.kernel.org/r/20201112182608.26177-1-claudiu.manoil@nxp.comSigned-off-by:
-
Wang Hai authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: aedd133d ("net/mlx5e: Support CT offload for tc nic flows") Reported-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Eli Cohen authored
Avoid calling mlx5_esw_modify_vport_rate() if qos is not enabled and avoid unnecessary syndrome messages from firmware. Fixes: fcb64c0f ("net/mlx5: E-Switch, add ingress rate support") Signed-off-by:
Eli Cohen <elic@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
-
Vladyslav Tarasiuk authored
Currently when QoS is enabled for VF and any min_rate is configured, the driver sets bw_share value to at least 1 and doesn’t allow to set it to 0 to make minimal rate unlimited. It means there is always a minimal rate configured for every VF, even if user tries to remove it. In order to make QoS disable possible, check whether all vports have configured min_rate = 0. If this is true, set their bw_share to 0 to disable min_rate limitations. Fixes: c9497c98 ("net/mlx5: Add support for setting VF min rate") Signed-off-by:
Vladyslav Tarasiuk <vladyslavt@nvidia.com> Reviewed-by:
-
Vladyslav Tarasiuk authored
Currently, if user disables VFs with some min and max rates configured, they are cleared. But QoS data is not cleared and restored upon next VF enable placing limits on minimal rate for given VF, when user expects none. To match cleared vport->info struct with QoS-related min and max rates upon VF disable, clear vport->qos struct too. Fixes: 556b9d16 ("net/mlx5: Clear VF's configuration on disabling SRIOV") Signed-off-by:
-
Michael Guralnik authored
Handle destruction of rules with port destination type to enable full destruction of flow. Without this handling of TX rules the deletion of these rules fails. Dmesg of flow destruction failure: [ 203.714146] mlx5_core 0000:00:0b.0: mlx5_cmd_check:753:(pid 342): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x144b7a) [ 210.547387] ------------[ cut here ]------------ [ 210.548663] refcount_t: decrement hit 0; leaking memory. [ 210.550651] WARNING: CPU: 4 PID: 342 at lib/refcount.c:31 refcount_warn_saturate+0x5c/0x110 [ 210.550654] Modules linked in: mlx5_ib mlx5_core ib_ipoib rdma_ucm rdma_cm iw_cm ib_cm ib_umad ib_uverbs ib_core [ 210.550675] CPU: 4 PID: 342 Comm: test Not tainted 5.8.0-rc2+ #116 [ 210.550678] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 210.550680] RIP: 0010:refcount_warn_saturate+0x5c/0x110 [ 210.550685] Code: c6 d1 1b 01 00 0f 84 ad 00 00 00 5b 5d c3 80 3d b5 d1 1b 01 00 75 f4 48 c7 c7 20 d1 15 82 c6 05 a5 d1 1b 01 01 e8 a7 eb af ff <0f> 0b eb dd 80 3d 99 d1 1b 01 00 75 d4 48 c7 c7 c0 cf 15 82 c6 05 [ 210.550687] RSP: 0018:ffff8881642e77e8 EFLAGS: 00010282 [ 210.550691] RAX: 0000000000000000 RBX: 0000000000000004 RCX: 0000000000000000 [ 210.550694] RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffffed102c85ceef [ 210.550696] RBP: ffff888161720428 R08: ffffffff8124c10e R09: ffffed103243beae [ 210.550698] R10: ffff8881921df56b R11: ffffed103243bead R12: ffff8881841b4180 [ 210.550701] R13: ffff888161720428 R14: ffff8881616d0000 R15: ffff888161720380 [ 210.550704] FS: 00007fc27f025740(0000) GS:ffff888192000000(0000) knlGS:0000000000000000 [ 210.550706] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 210.550708] CR2: 0000557e4b41a6a0 CR3: 0000000002415004 CR4: 0000000000360ea0 [ 210.550711] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 210.550713] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 210.550715] Call Trace: [ 210.550717] mlx5_del_flow_rules+0x484/0x490 [mlx5_core] [ 210.550720] ? mlx5_cmd_set_fte+0xa80/0xa80 [mlx5_core] [ 210.550722] mlx5_ib_destroy_flow+0x17f/0x280 [mlx5_ib] [ 210.550724] uverbs_free_flow+0x4c/0x90 [ib_uverbs] [ 210.550726] destroy_hw_idr_uobject+0x41/0xb0 [ib_uverbs] [ 210.550728] uverbs_destroy_uobject+0xaa/0x390 [ib_uverbs] [ 210.550731] __uverbs_cleanup_ufile+0x129/0x1b0 [ib_uverbs] [ 210.550733] ? uverbs_destroy_uobject+0x390/0x390 [ib_uverbs] [ 210.550735] uverbs_destroy_ufile_hw+0x78/0x190 [ib_uverbs] [ 210.550737] ib_uverbs_close+0x36/0x140 [ib_uverbs] [ 210.550739] __fput+0x181/0x380 [ 210.550741] task_work_run+0x88/0xd0 [ 210.550743] do_exit+0x5f6/0x13b0 [ 210.550745] ? sched_clock_cpu+0x30/0x140 [ 210.550747] ? is_current_pgrp_orphaned+0x70/0x70 [ 210.550750] ? lock_downgrade+0x360/0x360 [ 210.550752] ? mark_held_locks+0x1d/0x90 [ 210.550754] do_group_exit+0x8a/0x140 [ 210.550756] get_signal+0x20a/0xf50 [ 210.550758] do_signal+0x8c/0xbe0 [ 210.550760] ? hrtimer_nanosleep+0x1d8/0x200 [ 210.550762] ? nanosleep_copyout+0x50/0x50 [ 210.550764] ? restore_sigcontext+0x320/0x320 [ 210.550766] ? __hrtimer_init+0xf0/0xf0 [ 210.550768] ? timespec64_add_safe+0x150/0x150 [ 210.550770] ? mark_held_locks+0x1d/0x90 [ 210.550772] ? lockdep_hardirqs_on_prepare+0x14c/0x240 [ 210.550774] __prepare_exit_to_usermode+0x119/0x170 [ 210.550776] do_syscall_64+0x65/0x300 [ 210.550778] ? trace_hardirqs_off+0x10/0x120 [ 210.550781] ? mark_held_locks+0x1d/0x90 [ 210.550783] ? asm_sysvec_apic_timer_interrupt+0xa/0x20 [ 210.550785] ? lockdep_hardirqs_on+0x112/0x190 [ 210.550787] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 210.550789] RIP: 0033:0x7fc27f1cd157 [ 210.550791] Code: Bad RIP value. [ 210.550793] RSP: 002b:00007ffd4db27ea8 EFLAGS: 00000246 ORIG_RAX: 0000000000000023 [ 210.550798] RAX: fffffffffffffdfc RBX: ffffffffffffff80 RCX: 00007fc27f1cd157 [ 210.550800] RDX: 00007fc27f025740 RSI: 00007ffd4db27eb0 RDI: 00007ffd4db27eb0 [ 210.550803] RBP: 0000000000000016 R08: 0000000000000000 R09: 000000000000000e [ 210.550805] R10: 00007ffd4db27dc7 R11: 0000000000000246 R12: 0000000000400c00 [ 210.550808] R13: 00007ffd4db285f0 R14: 0000000000000000 R15: 0000000000000000 [ 210.550809] irq event stamp: 49399 [ 210.550812] hardirqs last enabled at (49399): [<ffffffff81172d36>] console_unlock+0x556/0x6f0 [ 210.550815] hardirqs last disabled at (49398): [<ffffffff81172897>] console_unlock+0xb7/0x6f0 [ 210.550818] softirqs last enabled at (48706): [<ffffffff81e0037b>] __do_softirq+0x37b/0x60c [ 210.550820] softirqs last disabled at (48697): [<ffffffff81c00e2f>] asm_call_on_stack+0xf/0x20 [ 210.550822] ---[ end trace ad18c0e6fa846454 ]--- [ 210.581862] mlx5_core 0000:00:0c.0: mlx5_destroy_flow_table:2132:(pid 342): Flow table 262150 wasn't destroyed, refcount > 1 Fixes: a7ee18bd ("RDMA/mlx5: Allow creating a matcher for a NIC TX flow table") Signed-off-by:
Michael Guralnik <michaelgur@nvidia.com> Reviewed-by:
Mark Bloch <mbloch@nvidia.com> Reviewed-by:
Maor Gottlieb <maorg@nvidia.com> Signed-off-by:
-
Maor Dickman authored
Bond events handler uses bond_slave_get_rtnl to check if net device is bond slave. bond_slave_get_rtnl return the rcu rx_handler pointer from the netdev which exists for bond slaves but also exists for devices that are attached to linux bridge so using it as indication for bond slave is wrong. Fix by using netif_is_lag_port instead. Fixes: 7e51891a ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule") Signed-off-by:
Maor Dickman <maord@nvidia.com> Reviewed-by:
Raed Salem <raeds@nvidia.com> Reviewed-by:
Ariel Levkovich <lariel@nvidia.com> Signed-off-by:
-
Huy Nguyen authored
Both TC and IPsec crypto offload use metadata_regB to store private information. Since TC does not use bit 31 of regB, IPsec will use bit 31 as the IPsec packet marker. The IPsec's regB usage is changed to: Bit31: IPsec marker Bit30-24: IPsec syndrome Bit23-0: IPsec obj id Fixes: b2ac7541 ("net/mlx5e: IPsec: Add Connect-X IPsec Rx data path offload") Signed-off-by:
Huy Nguyen <huyn@mellanox.com> Reviewed-by:
-
Huy Nguyen authored
The IP's checksum partial still requires L4 csum flag on Ethernet WQE. Make the IPsec WAs only for the IP's non checksum partial case (for example icmd packet) Fixes: 5be01904 ("net/mlx5e: IPsec: Add Connect-X IPsec Tx data path offload") Signed-off-by:
Alaa Hleihel <alaa@nvidia.com> Signed-off-by:
-
Maxim Mikityanskiy authored
On resync, the driver calls inet_lookup_established (__inet6_lookup_established) that increases sk_refcnt of the socket. To decrease it, the driver set skb->destructor to sock_edemux. However, it didn't work well, because the TCP stack also sets this destructor for early demux, and the refcount gets decreased only once, while increased two times (in mlx5e and in the TCP stack). It leads to a socket leak, a TLS context leak, which in the end leads to calling tls_dev_del twice: on socket close and on driver unload, which in turn leads to a crash. This commit fixes the refcount leak by calling sock_gen_put right away after using the socket, thus fixing all the subsequent issues. Fixes: 0419d8c9 ("net/mlx5e: kTLS, Add kTLS RX resync support") Signed-off-by:
Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by:
-
Ryan Sharpelletti authored
During loss recovery, retransmitted packets are forced to use TCP timestamps to calculate the RTT samples, which have a millisecond granularity. BBR is designed using a microsecond granularity. As a result, multiple RTT samples could be truncated to the same RTT value during loss recovery. This is problematic, as BBR will not enter PROBE_RTT if the RTT sample is <= the current min_rtt sample, meaning that if there are persistent losses, PROBE_RTT will constantly be pushed off and potentially never re-entered. This patch makes sure that BBR enters PROBE_RTT by checking if RTT sample is < the current min_rtt sample, rather than <=. The Netflix transport/TCP team discovered this bug in the Linux TCP BBR code during lab tests. Fixes: 0f8782ea ("tcp_bbr: add BBR congestion control") Signed-off-by:
Ryan Sharpelletti <sharpelletti@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Link: https://lore.kernel.org/r/20201116174412.1433277-1-sharpelletti.kdev@gmail.comSigned-off-by:
-
Joel Stanley authored
When removing the driver we would hit BUG_ON(!list_empty(&dev->ptype_specific)) in net/core/dev.c due to still having the NC-SI packet handler registered. # echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/unbind ------------[ cut here ]------------ kernel BUG at net/core/dev.c:10254! Internal error: Oops - BUG: 0 [#1] SMP ARM CPU: 0 PID: 115 Comm: sh Not tainted 5.10.0-rc3-next-20201111-00007-g02e0365710c4 #46 Hardware name: Generic DT based system PC is at netdev_run_todo+0x314/0x394 LR is at cpumask_next+0x20/0x24 pc : [<806f5830>] lr : [<80863cb0>] psr: 80000153 sp : 855bbd58 ip : 00000001 fp : 855bbdac r10: 80c03d00 r9 : 80c06228 r8 : 81158c54 r7 : 00000000 r6 : 80c05dec r5 : 80c05d18 r4 : 813b9280 r3 : 813b9054 r2 : 8122c470 r1 : 00000002 r0 : 00000002 Flags: Nzcv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none Control: 00c5387d Table: 85514008 DAC: 00000051 Process sh (pid: 115, stack limit = 0x7cb5703d) ... Backtrace: [<806f551c>] (netdev_run_todo) from [<80707eec>] (rtnl_unlock+0x18/0x1c) r10:00000051 r9:854ed710 r8:81158c54 r7:80c76bb0 r6:81158c10 r5:8115b410 r4:813b9000 [<80707ed4>] (rtnl_unlock) from [<806f5db8>] (unregister_netdev+0x2c/0x30) [<806f5d8c>] (unregister_netdev) from [<805a8180>] (ftgmac100_remove+0x20/0xa8) r5:8115b410 r4:813b9000 [<805a8160>] (ftgmac100_remove) from [<805355e4>] (platform_drv_remove+0x34/0x4c) Fixes: bd466c3f ("net/faraday: Support NCSI mode") Signed-off-by:
Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20201117024448.1170761-1-joel@jms.id.auSigned-off-by:
-
Zhang Changzhong authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 39a6f4bc ("b44: replace the ssb_dma API with the generic DMA API") Reported-by:
Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1605582131-36735-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by:
-
Zhang Changzhong authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 469981b1 ("qed: Add unaligned and packed packet processing") Fixes: fcb39f6c ("qed: Add mpa buffer descriptors for storing and processing mpa fpdus") Fixes: 1e28eaad ("qed: Add iWARP support for fpdu spanned over more than two tcp packets") Reported-by:
-
Jakub Kicinski authored
Michael Chan says: ==================== bnxt_en: Bug fixes. This first patch fixes a module eeprom A2h addressing issue. The next 2 patches fix counter related issues. The last one skips an unsupported firmware call on the VF to avoid the error log. ==================== Link: https://lore.kernel.org/r/1605486472-28156-1-git-send-email-michael.chan@broadcom.comSigned-off-by:
-
