* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (75 commits)
  net: Handle NETREG_UNINITIALIZED devices correctly
  can: add the driver for Analog Devices Blackfin on-chip CAN controllers
  xfrm: Fix truncation length of authentication algorithms installed via PF_KEY
  net: use compat helper functions in compat_sys_recvmmsg
  net: fix compat_sys_recvmmsg parameter type
  cxgb3: Fixing EEH handlers
  cnic: Zero out status block and Event Queue indices.
  cnic: Send delete command when shutting down iSCSI ring.
  net: smc91x: Fix up type mismatch in smc_drv_resume().
  smc91x: fix unused flags warnings on UP systems
  MAINTAINERS: Transfering maintainership of cdc-ether
  net: Add missing TST_CFG_WRITE bits around sky2_pci_write
  net: Fix Yukon-2 Optima TCP offload setup
  net: niu uses crc32, so select CRC32
  wireless: update old static regulatory domain rules
  mac80211: Revert 'Use correct sign for mesh active path refresh'
  mac80211: Fixed bug in mesh portal paths
  net/mac80211: Correct size given to memset
  b43: Remove reset after fatal DMA error
  rtl8187: add radio led and fix warnings on suspend
  ...

* 'compat-ioctl-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
  usbdevfs: move compat_ioctl handling to devio.c
  lp: move compat_ioctl handling into lp.c
  compat_ioctl: pass compat pointer directly to handlers
  compat_ioctl: simplify lookup table
  compat_ioctl: simplify calling of handlers
  compat_ioctl: inline all conversion handlers
  compat_ioctl: Remove BKL
  compat_ioctl: remove all VT ioctl handling

* git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: add sys_recvmmsg to unistd.h
  asm-generic: add sys_accept4 to unistd.h
  asm-generic/gpio.h: add some forward decls of the device struct
  asm-generic: Fix typo in asm-generic/unistd.h.
  lib/checksum: fix one more thinko
  lib/checksum.c: make do_csum optional
  lib/checksum.c: use 32-bit arithmetic consistently

Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  itimer: Fix the itimer trace print format
  hrtimer: move timer stats helper functions to hrtimer.c
  hrtimer: Tune hrtimer_interrupt hang logic

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  lockdep: Avoid out of bounds array reference in save_trace()
  futex: Take mmap_sem for get_user_pages in fault_in_user_writeable
  lockstat: Add usage info to Documentation/lockstat.txt
  lockstat: Fix min, max times in /proc/lock_stats

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86/amd-iommu: Fix PCI hotplug with passthrough mode
  x86/amd-iommu: Fix passthrough mode
  x86: mmio-mod.c: Use pr_fmt
  x86: kmmio.c: Add and use pr_fmt(fmt)
  x86: i8254.c: Add pr_fmt(fmt)
  x86: setup_percpu.c: Use pr_<level> and add pr_fmt(fmt)
  x86: es7000_32.c: Use pr_<level> and add pr_fmt(fmt)
  x86: Print DMI_BOARD_NAME as well as DMI_PRODUCT_NAME from __show_regs()
  x86: Factor duplicated code out of __show_regs() into show_regs_common()
  arch/x86/kernel/microcode*: Use pr_fmt() and remove duplicated KERN_ERR prefix
  x86, mce: fix confusion between bank attributes and mce attributes
  x86/mce: Set up timer unconditionally
  x86: Fix bogus warning in apic_noop.apic_write()
  x86: Fix typo in arch/x86/mm/kmmio.c
  x86: ASUS P4S800 reboot=bios quirk

Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Remove comparing of NULL to va_list in trace_array_vprintk()
  tracing: Fix function graph trace_pipe to properly display failed entries
  tracing: Add full state to trace_seq
  tracing: Buffer the output of seq_file in case of filled buffer
  tracing: Only call pipe_close if pipe_close is defined
  tracing: Add pipe_close interface

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (57 commits)
  x86, perf events: Check if we have APIC enabled
  perf_event: Fix variable initialization in other codepaths
  perf kmem: Fix unused argument build warning
  perf symbols: perf_header__read_build_ids() offset'n'size should be u64
  perf symbols: dsos__read_build_ids() should read both user and kernel buildids
  perf tools: Align long options which have no short forms
  perf kmem: Show usage if no option is specified
  sched: Mark sched_clock() as notrace
  perf sched: Add max delay time snapshot
  perf tools: Correct size given to memset
  perf_event: Fix perf_swevent_hrtimer() variable initialization
  perf sched: Fix for getting task's execution time
  tracing/kprobes: Fix field creation's bad error handling
  perf_event: Cleanup for cpu_clock_perf_event_update()
  perf_event: Allocate children's perf_event_ctxp at the right time
  perf_event: Clean up __perf_event_init_context()
  hw-breakpoints: Modify breakpoints without unregistering them
  perf probe: Update perf-probe document
  perf probe: Support --del option
  trace-kprobe: Support delete probe syntax
  ...

* 'for-linus' of git://codeaurora.org/quic/kernel/dwalker/linux-msm:
  HTC Dream: mmc compilation fixes
  video: Allow selecting MSM framebuffer in Kconfig
  Add arm msm maintainer entry
  msm: Add memory map for HTC Dream
  msm: add minimal board file for HTC Dream device
  msm: make debugging UART (for DEBUG_LL) configurable

Conflicts:
	include/net/tcp.h

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [ACPI/CPUFREQ] Introduce bios_limit per cpu cpufreq sysfs interface
  [CPUFREQ] make internal cpufreq_add_dev_* static
  [CPUFREQ] use an enum for speedstep processor identification
  [CPUFREQ] Document units for transition latency
  [CPUFREQ] Use global sysfs cpufreq structure for conservative governor tunings
  [CPUFREQ] Documentation: ABI: /sys/devices/system/cpu/cpu#/cpufreq/
  [CPUFREQ] powernow-k6: set transition latency value so ondemand governor can be used
  [CPUFREQ] cpumask: don't put a cpumask on the stack in x86...cpufreq/powernow-k8.c

The debug batman option needs to depend on the correct
config option.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[ "No means no!"  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (58 commits)
  tty: split the lock up a bit further
  tty: Move the leader test in disassociate
  tty: Push the bkl down a bit in the hangup code
  tty: Push the lock down further into the ldisc code
  tty: push the BKL down into the handlers a bit
  tty: moxa: split open lock
  tty: moxa: Kill the use of lock_kernel
  tty: moxa: Fix modem op locking
  tty: moxa: Kill off the throttle method
  tty: moxa: Locking clean up
  tty: moxa: rework the locking a bit
  tty: moxa: Use more tty_port ops
  tty: isicom: fix deadlock on shutdown
  tty: mxser: Use the new locking rules to fix setserial properly
  tty: mxser: use the tty_port_open method
  tty: isicom: sort out the board init logic
  tty: isicom: switch to the new tty_port_open helper
  tty: tty_port: Add a kref object to the tty port
  tty: istallion: tty port open/close methods
  tty: stallion: Convert to the tty_port_open/close methods
  ...

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (21 commits)
  ext3: PTR_ERR return of wrong pointer in setup_new_group_blocks()
  ext3: Fix data / filesystem corruption when write fails to copy data
  ext4: Support for 64-bit quota format
  ext3: Support for vfsv1 quota format
  quota: Implement quota format with 64-bit space and inode limits
  quota: Move definition of QFMT_OCFS2 to linux/quota.h
  ext2: fix comment in ext2_find_entry about return values
  ext3: Unify log messages in ext3
  ext2: clear uptodate flag on super block I/O error
  ext2: Unify log messages in ext2
  ext3: make "norecovery" an alias for "noload"
  ext3: Don't update the superblock in ext3_statfs()
  ext3: journal all modifications in ext3_xattr_set_handle
  ext2: Explicitly assign values to on-disk enum of filetypes
  quota: Fix WARN_ON in lookup_one_len
  const: struct quota_format_ops
  ubifs: remove manual O_SYNC handling
  afs: remove manual O_SYNC handling
  kill wait_on_page_writeback_range
  vfs: Implement proper O_SYNC semantics
  ...

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: Fix error return for fallocate() on XFS
  xfs: cleanup dmapi macros in the umount path
  xfs: remove incorrect sparse annotation for xfs_iget_cache_miss
  xfs: kill the STATIC_INLINE macro
  xfs: uninline xfs_get_extsz_hint
  xfs: rename xfs_attr_fetch to xfs_attr_get_int
  xfs: simplify xfs_buf_get / xfs_buf_read interfaces
  xfs: remove IO_ISAIO
  xfs: Wrapped journal record corruption on read at recovery
  xfs: cleanup data end I/O handlers
  xfs: use WRITE_SYNC_PLUG for synchronous writeout
  xfs: reset the i_iolock lock class in the reclaim path
  xfs: I/O completion handlers must use NOFS allocations
  xfs: fix mmap_sem/iolock inversion in xfs_free_eofblocks
  xfs: simplify inode teardown

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (235 commits)
  Staging: IIO: add selection of IIO_SW_RING to LIS3L02DQ as needed
  Staging: IIO: Add tsl2560-2 support to tsl2563 driver.
  Staging: IIO: Remove tsl2561 driver. Support merged with tsl2563.
  Staging: wlags49_h2: fix up signal levels
  + drivers-staging-wlags49_h2-remove-cvs-metadata.patch added to -mm tree
  Staging: samsung-laptop: add TODO file
  Staging: samsung-laptop: remove old kernel code
  Staging: add Samsung Laptop driver
  staging: batman-adv meshing protocol
  Staging: rtl8192u: depends on USB
  Staging: rtl8192u: remove dead code
  Staging: rtl8192u: remove bad whitespaces
  Staging: rtl8192u: make it compile
  Staging: Added Realtek rtl8192u driver to staging
  Staging: dream: add gpio and pmem support
  Staging: dream: add TODO file
  Staging: android: delete android drivers
  Staging: et131x: clean up the avail fields in the rx registers
  Staging: et131x: Clean up number fields
  Staging: et131x: kill RX_DMA_MAX_PKT_TIME
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (27 commits)
  Driver core: fix race in dev_driver_string
  Driver Core: Early platform driver buffer
  sysfs: sysfs_setattr remove unnecessary permission check.
  sysfs: Factor out sysfs_rename from sysfs_rename_dir and sysfs_move_dir
  sysfs: Propagate renames to the vfs on demand
  sysfs: Gut sysfs_addrm_start and sysfs_addrm_finish
  sysfs: In sysfs_chmod_file lazily propagate the mode change.
  sysfs: Implement sysfs_getattr & sysfs_permission
  sysfs: Nicely indent sysfs_symlink_inode_operations
  sysfs: Update s_iattr on link and unlink.
  sysfs: Fix locking and factor out sysfs_sd_setattr
  sysfs: Simplify iattr time assignments
  sysfs: Simplify sysfs_chmod_file semantics
  sysfs: Use dentry_ops instead of directly playing with the dcache
  sysfs: Rename sysfs_d_iput to sysfs_dentry_iput
  sysfs: Update sysfs_setxattr so it updates secdata under the sysfs_mutex
  debugfs: fix create mutex racy fops and private data
  Driver core: Don't remove kobjects in device_shutdown.
  firmware_class: make request_firmware_nowait more useful
  Driver-Core: devtmpfs - set root directory mode to 0755
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (122 commits)
  USB: mos7840: add device IDs for B&B electronics devices
  USB: ftdi_sio: add USB device ID's for B&B Electronics line
  USB: musb: musb_host: fix sparse warning
  USB: musb: musb_gadget: fix sparse warning
  USB: musb: omap2430: fix sparse warning
  USB: core: message: fix sparse warning
  USB: core: hub: fix sparse warning
  USB: core: fix sparse warning for static function
  USB: Added USB_ETH_RNDIS to use instead of CONFIG_USB_ETH_RNDIS
  USB: Check bandwidth when switching alt settings.
  USB: Refactor code to find alternate interface settings.
  USB: xhci: Fix command completion after a drop endpoint.
  USB: xhci: Make reverting an alt setting "unfailable".
  USB: usbtmc: Use usb_clear_halt() instead of custom code.
  USB: xhci: Add correct email and files to MAINTAINERS entry.
  USB: ehci-omap.c: introduce missing kfree
  USB: xhci-mem.c: introduce missing kfree
  USB: add remove_id sysfs attr for usb drivers
  USB: g_multi kconfig: fix depends and help text
  USB: option: add pid for ZTE
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: ohci: handle receive packets with a data length of zero

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb: Always process the whole breakpoint list on activate or deactivate
  kgdb: continue and warn on signal passing from gdb
  kgdb,x86: do not set kgdb_single_step on x86
  kgdb: allow for cpu switch when single stepping
  kgdb,i386: Fix corner case access to ss with NMI watch dog exception
  kgdb: Replace strstr() by strchr() for single-character needles
  kgdbts: Read buffer overflow
  kgdb: Read buffer overflow
  kgdb,x86: remove redundant test

The tty count sanity check may need the BKL, that isn't clear. However it
is clear that the count use of the lock is internal and independant of the
bigger use of the lock.

Furthermore the file list locking is also separately locked already
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

There are two call points, both want to check that tty->signal->leader is
set. Move the test into disassociate_ctty() as that will make locking
changes easier in a bit
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

We know that the redirect field is handled via its own locking in all
places
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Start trying to untangle the remaining BKL mess

Updated to fix missing unlock_kernel noted by Dan Carpenter
Signed-off-by: Alan "I must be out of my tree" Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

moxa_openlock is used for several situations where we want to handle the
case of an ioctl that crosses many ports (not just the open tty), and also
cases where an open races a deinit (eg a pci unplug) and we hangup a port
before we can cope with that.

The non open race cases can use the moxa_lock spinlock. This simplifies sorting
out the remaining mess.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

It isn't needed here any more
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

This is overkill and mostly not needed
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The tty flag can be tested so the shadow flag isn't needed
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

- The open lock is needed to fix up the case of a board reset occuring during
  tty open but too early for a sane hangup response.
- The lock can however got for other cases
- Use the port mutex for get/setserial
- Fix up the confused lack of locking on the THROTTLE and other bits in the
  private flags. Just use set/test/clear bit and it covers the cases we need
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Introduce a lock for moxafunc() to protect the cases where were get collisions
between two function requests at the same time.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Rework a few bits of this into tty_port format
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Alexander Strakh <strakh@ispras.ru> reported

	KERNEL_VERSION: 2.6.31
	DESCRIBE:
Driver drivers/char/isicom.c might sleep in atomic  context, because it
calls 
tty_port_xmit_buf under spin_lock.

./drivers/char/isicom.c:
1307 static void isicom_hangup(struct tty_struct *tty)
1308 {
...
1315         spin_lock_irqsave(&port->card->card_lock, flags);
1316         isicom_shutdown_port(port);
...

Path to might_sleep macro from isicom_hangup:
1. isicom_hangup calls spin_lock_irqsave (drivers/char/isicom.c:1315) and
then 
calls isicom_shutdown_port.
2. isiscom_shutdown_port calls tty_port_free_xmit_buf at 
drivers/char/isicom.c:906
3. tty_port_free_xmit_buf calls mutex_lock at drivers/char/tty_port:48

Found by Linux Driver Verification Project.
Reported-by: Alexander Strakh <strakh@ispras.ru>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Propogate the init/shutdown mutex through the setserial logic. Use the proper
locks for the various bits still using the BKL. Kill the BKL in this driver.

Updated to fix the bug noted by Dan Carpenter
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

At first this looks a fairly trivial conversion but we can't quite push
everything into the right format yet. The open side is easy but care is needed
over the setserial methods. Fix up the locking now that we've adopted the
port->mutex locking rule for the initialization.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Split this into two flags - INIT meaning the board is set up and ACTIVE
meaning the board has ports open. Remove the broken HUPCL casing and push
the counts somewhere sensible.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Trivial conversion in this case so might as well do it while testing the
port_open design is right
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Users of tty port need a way to refcount ports when hotplugging is
involved.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Slice/dice/repeat as with the stallion driver this is just code shuffling
and removal
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

The driver is already structured this way so just slice and dice
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>