- 15 Sep, 2020 17 commits
-
-
Andrew Scull authored
Rather than passing arbitrary function pointers to run at hyp, define and equivalent set of SMCCC functions. Since the SMCCC functions are strongly tied to the original function prototypes, it is not expected for the host to ever call an invalid ID but a warning is raised if this does ever occur. As __kvm_vcpu_run is used for every switch between the host and a guest, it is explicitly singled out to be identified before the other function IDs to improve the performance of the hot path. Signed-off-by:
Andrew Scull <ascull@google.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200915104643.2543892-18-ascull@google.com
-
Andrew Scull authored
Using the same register-bound variable for both arguments and results means these values share a type. That type must allow the arguments to be assigned to it and must also be assignable to the unsigned long fields of struct arm_smccc_res. This restriction on types causes compiler warnings when the argument cannot be implicitly assigned to an unsigned long, for example the pointers that are used in the KVM hyp interface. By separating the arguments and results into their own variables, the type constraint is lifted allowing the arguments to avoid the need for any type conversion. Signed-off-by:
-
Andrew Scull authored
Vendor specific hypervisor services have their own region of function identifiers reserved by SMCCC. Extend the list of owners to include this case. Signed-off-by:
-
Andrew Scull authored
Rather than some being kernel pointer and others being hyp pointers, standardize on all pointers being hyp pointers. Signed-off-by:
-
Andrew Scull authored
Restore the host context when panicking from hyp to give the best chance of the panic being clean. The host requires that registers be preserved such as x18 for the shadow callstack. If the panic is caused by an exception from EL1, the host context is still valid so the panic can return straight back to the host. If the panic comes from EL2 then it's most likely that the hyp context is active and the host context needs to be restored. There are windows before and after the host context is saved and restored that restoration is attempted incorrectly and the panic won't be clean. Signed-off-by:
-
Andrew Scull authored
Save and restore the host context when switching to and from hyp. This gives hyp its own context that the host will not see as a step towards a full trust boundary between the two. SP_EL0 and pointer authentication keys are currently shared between the host and hyp so don't need to be switched yet. Signed-off-by:
-
Andrew Scull authored
To avoid duplicating the context save and restore macros, move them into a shareable header. Signed-off-by:
-
Andrew Scull authored
If the guest context is loaded when a panic is triggered, restore the hyp context so e.g. the shadow call stack works when hyp_panic() is called and SP_EL0 is valid when the host's panic() is called. Use the hyp context's __hyp_running_vcpu field to track when hyp transitions to and from the guest vcpu so the exception handlers know whether the context needs to be restored. Signed-off-by:
-
Andrew Scull authored
Hyp now has its own nominal context for saving and restoring its state when switching to and from a guest. Update the related comments and utilities to match the new name. Signed-off-by:
-
Andrew Scull authored
During __guest_enter, save and restore from a new hyp context rather than the host context. This is preparation for separation of the hyp and host context in nVHE. Signed-off-by:
-
Andrew Scull authored
The ESB at the start of the host vector may cause SErrors to be consumed to DISR_EL1. However, this is not checked for the host so the SError could go unhandled. Remove the ESB so that SErrors are not consumed but are instead left pending for the host to consume. __guest_enter already defers entry into a guest if there are any SErrors pending. Signed-off-by:
-
Andrew Scull authored
The host is treated differently from the guests when an exception is taken so introduce a separate vector that is specialized for the host. This also allows the nVHE specific code to move out of hyp-entry.S and into nvhe/host.S. The host is only expected to make HVC calls and anything else is considered invalid and results in a panic. Hyp initialization is now passed the vector that is used for the host and it is swapped for the guest vector during the context switch. Signed-off-by:
-
Andrew Scull authored
Introduce a percpu variable to hold the address of the selected hyp vector that will be used with guests. This avoids the selection process each time a guest is being entered and can be used by nVHE when a separate vector is introduced for the host. Signed-off-by:
-
Andrew Scull authored
Make CHOOSE_HYP_SYM select the symbol of the active hypervisor for the host, the nVHE symbol for nVHE and the VHE symbol for VHE. The nVHE and VHE hypervisors see their own symbols without prefixes and trigger a link error when trying to use a symbol of the other hypervisor. Signed-off-by:
-
Andrew Scull authored
The kvm_host_data_t typedef is used inconsistently and goes against the kernel's coding style. Remove it in favour of the full struct specifier. Signed-off-by:
-
Andrew Scull authored
hyp_panic is able to find all the context it needs from within itself so remove the argument. The __hyp_panic wrapper becomes redundant so is also removed. Signed-off-by:
-
Andrew Scull authored
The __activate_vm wrapper serves no useful function and has a misleading name as it simply calls __load_guest_stage2 and does not touch HCR_EL2.VM so remove it. Also rename __deactivate_vm to __load_host_stage2 to match naming pattern. Signed-off-by:
-
- 07 Sep, 2020 1 commit
-
-
Linus Torvalds authored
-
- 06 Sep, 2020 4 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull more io_uring fixes from Jens Axboe: "Two followup fixes. One is fixing a regression from this merge window, the other is two commits fixing cancelation of deferred requests. Both have gone through full testing, and both spawned a few new regression test additions to liburing. - Don't play games with const, properly store the output iovec and assign it as needed. - Deferred request cancelation fix (Pavel)" * tag 'io_uring-5.9-2020-09-06' of git://git.kernel.dk/linux-block: io_uring: fix linked deferred ->files cancellation io_uring: fix cancel of deferred reqs with ->files io_uring: fix explicit async read/write mapping for large segments -
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull iommu fixes from Joerg Roedel: - three Intel VT-d fixes to fix address handling on 32bit, fix a NULL pointer dereference bug and serialize a hardware register access as required by the VT-d spec. - two patches for AMD IOMMU to force AMD GPUs into translation mode when memory encryption is active and disallow using IOMMUv2 functionality. This makes the AMDGPU driver work when memory encryption is active. - two more fixes for AMD IOMMU to fix updating the Interrupt Remapping Table Entries. - MAINTAINERS file update for the Qualcom IOMMU driver. * tag 'iommu-fixes-v5.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Handle 36bit addressing for x86-32 iommu/amd: Do not use IOMMUv2 functionality when SME is active iommu/amd: Do not force direct mapping when SME is active iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE iommu/amd: Restore IRTE.RemapEn bit after programming IRTE iommu/vt-d: Fix NULL pointer dereference in dev_iommu_priv_set() iommu/vt-d: Serialize IOMMU GCMD register modifications MAINTAINERS: Update QUALCOMM IOMMU after Arm SMMU drivers move
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: - more generic entry code ABI fallout - debug register handling bugfixes - fix vmalloc mappings on 32-bit kernels - kprobes instrumentation output fix on 32-bit kernels - fix over-eager WARN_ON_ONCE() on !SMAP hardware - NUMA debugging fix - fix Clang related crash on !RETPOLINE kernels * tag 'x86-urgent-2020-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/entry: Unbreak 32bit fast syscall x86/debug: Allow a single level of #DB recursion x86/entry: Fix AC assertion tracing/kprobes, x86/ptrace: Fix regs argument order for i386 x86, fakenuma: Fix invalid starting node ID x86/mm/32: Bring back vmalloc faulting on x86_32 x86/cmdline: Disable jump tables for cmdline.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen updates from Juergen Gross: "A small series for fixing a problem with Xen PVH guests when running as backends (e.g. as dom0). Mapping other guests' memory is now working via ZONE_DEVICE, thus not requiring to abuse the memory hotplug functionality for that purpose" * tag 'for-linus-5.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: add helpers to allocate unpopulated memory memremap: rename MEMORY_DEVICE_DEVDAX to MEMORY_DEVICE_GENERIC xen/balloon: add header guard
-
- 05 Sep, 2020 18 commits
-
-
Pavel Begunkov authored
While looking for ->files in ->defer_list, consider that requests there may actually be links. Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Pavel Begunkov authored
While trying to cancel requests with ->files, it also should look for requests in ->defer_list, otherwise it might end up hanging a thread. Cancel all requests in ->defer_list up to the last request there with matching ->files, that's needed to follow drain ordering semantics. Signed-off-by:
-
Linus Torvalds authored
Merge tags 'auxdisplay-for-linus-v5.9-rc4', 'clang-format-for-linus-v5.9-rc4' and 'compiler-attributes-for-linus-v5.9-rc4' of git://github.com/ojeda/linux Pull misc fixes from Miguel Ojeda: "A trivial patch for auxdisplay: - Replace HTTP links with HTTPS ones (Alexander A. Klimov) The usual clang-format trivial update: - Update with the latest for_each macro list (Miguel Ojeda) And Luc requested me to pick a sparse fix on my queue, so here it goes along with other two trivial Compiler Attributes ones (also from Luc). - sparse: use static inline for __chk_{user,io}_ptr() (Luc Van Oostenryck) - Compiler Attributes: fix comment concerning GCC 4.6 (Luc Van Oostenryck) - Compiler Attributes: remove comment about sparse not supporting __has_attribute (Luc Van Oostenryck)" * tag 'auxdisplay-for-linus-v5.9-rc4' of git://github.com/ojeda/linux: auxdisplay: Replace HTTP links with HTTPS ones * tag 'clang-format-for-linus-v5.9-rc4' of git://github.com/ojeda/linux: clang-format: Update with the latest for_each macro list * tag 'compiler-attributes-for-linus-v5.9-rc4' of git://github.com/ojeda/linux: sparse: use static inline for __chk_{user,io}_ptr() Compiler Attributes: fix comment concerning GCC 4.6 Compiler Attributes: remove comment about sparse not supporting __has_attribute
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC fixes from Vineet Gupta: - HSDK-4xd Dev system: perf driver updates for sampling interrupt - HSDK* Dev System: Ethernet broken [Evgeniy Didin] - HIGHMEM broken (2 memory banks) [Mike Rapoport] - show_regs() rewrite once and for all - Other minor fixes * tag 'arc-5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [plat-hsdk]: Switch ethernet phy-mode to rgmii-id arc: fix memory initialization for systems with two memory banks irqchip/eznps: Fix build error for !ARC700 builds ARC: show_regs: fix r12 printing and simplify ARC: HSDK: wireup perf irq ARC: perf: don't bail setup if pct irq missing in device-tree ARC: pgalloc.h: delete a duplicated word + other fixes
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "19 patches. Subsystems affected by this patch series: MAINTAINERS, ipc, fork, checkpatch, lib, and mm (memcg, slub, pagemap, madvise, migration, hugetlb)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: include/linux/log2.h: add missing () around n in roundup_pow_of_two() mm/khugepaged.c: fix khugepaged's request size in collapse_file mm/hugetlb: fix a race between hugetlb sysctl handlers mm/hugetlb: try preferred node first when alloc gigantic page from cma mm/migrate: preserve soft dirty in remove_migration_pte() mm/migrate: remove unnecessary is_zone_device_page() check mm/rmap: fixup copying of soft dirty and uffd ptes mm/migrate: fixup setting UFFD_WP flag mm: madvise: fix vma user-after-free checkpatch: fix the usage of capture group ( ... ) fork: adjust sysctl_max_threads definition to match prototype ipc: adjust proc_ipc_sem_dointvec definition to match prototype mm: track page table modifications in __apply_to_page_range() MAINTAINERS: IA64: mark Status as Odd Fixes only MAINTAINERS: add LLVM maintainers MAINTAINERS: update Cavium/Marvell entries mm: slub: fix conversion of freelist_corrupted() mm: memcg: fix memcg reclaim soft lockup memcg: fix use-after-free in uncharge_batch
-
Jason Gunthorpe authored
Otherwise gcc generates warnings if the expression is complicated. Fixes: 312a0c17 ("[PATCH] LOG2: Alter roundup_pow_of_two() so that it can use a ilog2() on a constant") Signed-off-by:
Jason Gunthorpe <jgg@nvidia.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Link: https://lkml.kernel.org/r/0-v1-8a2697e3c003+41165-log_brackets_jgg@nvidia.comSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
collapse_file() in khugepaged passes PAGE_SIZE as the number of pages to be read to page_cache_sync_readahead(). The intent was probably to read a single page. Fix it to use the number of pages to the end of the window instead. Fixes: 99cb0dbd ("mm,thp: add read-only THP support for (non-shmem) FS") Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
Song Liu <songliubraving@fb.com> Acked-by:
Yang Shi <shy828301@gmail.com> Acked-by:
Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Eric Biggers <ebiggers@google.com> Link: https://lkml.kernel.org/r/20200903140844.14194-2-willy@infradead.orgSigned-off-by:
-
Muchun Song authored
There is a race between the assignment of `table->data` and write value to the pointer of `table->data` in the __do_proc_doulongvec_minmax() on the other thread. CPU0: CPU1: proc_sys_write hugetlb_sysctl_handler proc_sys_call_handler hugetlb_sysctl_handler_common hugetlb_sysctl_handler table->data = &tmp; hugetlb_sysctl_handler_common table->data = &tmp; proc_doulongvec_minmax do_proc_doulongvec_minmax sysctl_head_finish __do_proc_doulongvec_minmax unuse_table i = table->data; *i = val; // corrupt CPU1's stack Fix this by duplicating the `table`, and only update the duplicate of it. And introduce a helper of proc_hugetlb_doulongvec_minmax() to simplify the code. The following oops was seen: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page Code: Bad RIP value. ... Call Trace: ? set_max_huge_pages+0x3da/0x4f0 ? alloc_pool_huge_page+0x150/0x150 ? proc_doulongvec_minmax+0x46/0x60 ? hugetlb_sysctl_handler_common+0x1c7/0x200 ? nr_hugepages_store+0x20/0x20 ? copy_fd_bitmaps+0x170/0x170 ? hugetlb_sysctl_handler+0x1e/0x20 ? proc_sys_call_handler+0x2f1/0x300 ? unregister_sysctl_table+0xb0/0xb0 ? __fd_install+0x78/0x100 ? proc_sys_write+0x14/0x20 ? __vfs_write+0x4d/0x90 ? vfs_write+0xef/0x240 ? ksys_write+0xc0/0x160 ? __ia32_sys_read+0x50/0x50 ? __close_fd+0x129/0x150 ? __x64_sys_write+0x43/0x50 ? do_syscall_64+0x6c/0x200 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: e5ff2159 ("hugetlb: multiple hstates for multiple page sizes") Signed-off-by:Muchun Song <songmuchun@bytedance.com> Signed-off-by:
Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/20200828031146.43035-1-songmuchun@bytedance.comSigned-off-by:
-
Li Xinhai authored
Since commit cf11e85f ("mm: hugetlb: optionally allocate gigantic hugepages using cma"), the gigantic page would be allocated from node which is not the preferred node, although there are pages available from that node. The reason is that the nid parameter has been ignored in alloc_gigantic_page(). Besides, the __GFP_THISNODE also need be checked if user required to alloc only from the preferred node. After this patch, the preferred node is tried first before other allowed nodes, and don't try to allocate from other nodes if __GFP_THISNODE is specified. If user don't specify the preferred node, the current node will be used as preferred node, which makes sure consistent behavior of allocating gigantic and non-gigantic hugetlb page. Fixes: cf11e85f ("mm: hugetlb: optionally allocate gigantic hugepages using cma") Signed-off-by:
Li Xinhai <lixinhai.lxh@gmail.com> Signed-off-by:
Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Link: https://lkml.kernel.org/r/20200902025016.697260-1-lixinhai.lxh@gmail.comSigned-off-by:
-
Ralph Campbell authored
The code to remove a migration PTE and replace it with a device private PTE was not copying the soft dirty bit from the migration entry. This could lead to page contents not being marked dirty when faulting the page back from device private memory. Signed-off-by:
Ralph Campbell <rcampbell@nvidia.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Alistair Popple <apopple@nvidia.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Bharata B Rao <bharata@linux.ibm.com> Link: https://lkml.kernel.org/r/20200831212222.22409-3-rcampbell@nvidia.comSigned-off-by:
-
Ralph Campbell authored
Patch series "mm/migrate: preserve soft dirty in remove_migration_pte()". I happened to notice this from code inspection after seeing Alistair Popple's patch ("mm/rmap: Fixup copying of soft dirty and uffd ptes"). This patch (of 2): The check for is_zone_device_page() and is_device_private_page() is unnecessary since the latter is sufficient to determine if the page is a device private page. Simplify the code for easier reading. Signed-off-by: -
Alistair Popple authored
During memory migration a pte is temporarily replaced with a migration swap pte. Some pte bits from the existing mapping such as the soft-dirty and uffd write-protect bits are preserved by copying these to the temporary migration swap pte. However these bits are not stored at the same location for swap and non-swap ptes. Therefore testing these bits requires using the appropriate helper function for the given pte type. Unfortunately several code locations were found where the wrong helper function is being used to test soft_dirty and uffd_wp bits which leads to them getting incorrectly set or cleared during page-migration. Fix these by using the correct tests based on pte type. Fixes: a5430dda ("mm/migrate: support un-addressable ZONE_DEVICE page in migration") Fixes: 8c3328f1 ("mm/migrate: migrate_vma() unmap page from vma while collecting pages") Fixes: f45ec5ff ("userfaultfd: wp: support swap and page migration") Signed-off-by:
Alistair Popple <alistair@popple.id.au> Signed-off-by:
Peter Xu <peterx@redhat.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Alistair Popple <alistair@popple.id.au> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200825064232.10023-2-alistair@popple.id.auSigned-off-by:
-
Alistair Popple authored
Commit f45ec5ff ("userfaultfd: wp: support swap and page migration") introduced support for tracking the uffd wp bit during page migration. However the non-swap PTE variant was used to set the flag for zone device private pages which are a type of swap page. This leads to corruption of the swap offset if the original PTE has the uffd_wp flag set. Fixes: f45ec5ff ("userfaultfd: wp: support swap and page migration") Signed-off-by:
-
Yang Shi authored
The syzbot reported the below use-after-free: BUG: KASAN: use-after-free in madvise_willneed mm/madvise.c:293 [inline] BUG: KASAN: use-after-free in madvise_vma mm/madvise.c:942 [inline] BUG: KASAN: use-after-free in do_madvise.part.0+0x1c8b/0x1cf0 mm/madvise.c:1145 Read of size 8 at addr ffff8880a6163eb0 by task syz-executor.0/9996 CPU: 0 PID: 9996 Comm: syz-executor.0 Not tainted 5.9.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x18f/0x20d lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 madvise_willneed mm/madvise.c:293 [inline] madvise_vma mm/madvise.c:942 [inline] do_madvise.part.0+0x1c8b/0x1cf0 mm/madvise.c:1145 do_madvise mm/madvise.c:1169 [inline] __do_sys_madvise mm/madvise.c:1171 [inline] __se_sys_madvise mm/madvise.c:1169 [inline] __x64_sys_madvise+0xd9/0x110 mm/madvise.c:1169 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Allocated by task 9992: kmem_cache_alloc+0x138/0x3a0 mm/slab.c:3482 vm_area_alloc+0x1c/0x110 kernel/fork.c:347 mmap_region+0x8e5/0x1780 mm/mmap.c:1743 do_mmap+0xcf9/0x11d0 mm/mmap.c:1545 vm_mmap_pgoff+0x195/0x200 mm/util.c:506 ksys_mmap_pgoff+0x43a/0x560 mm/mmap.c:1596 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 9992: kmem_cache_free.part.0+0x67/0x1f0 mm/slab.c:3693 remove_vma+0x132/0x170 mm/mmap.c:184 remove_vma_list mm/mmap.c:2613 [inline] __do_munmap+0x743/0x1170 mm/mmap.c:2869 do_munmap mm/mmap.c:2877 [inline] mmap_region+0x257/0x1780 mm/mmap.c:1716 do_mmap+0xcf9/0x11d0 mm/mmap.c:1545 vm_mmap_pgoff+0x195/0x200 mm/util.c:506 ksys_mmap_pgoff+0x43a/0x560 mm/mmap.c:1596 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 It is because vma is accessed after releasing mmap_lock, but someone else acquired the mmap_lock and the vma is gone. Releasing mmap_lock after accessing vma should fix the problem. Fixes: 692fe624 ("mm: Handle MADV_WILLNEED through vfs_fadvise()") Reported-by: syzbot+b90df26038d1d5d85c97@syzkaller.appspotmail.com Signed-off-by:Jan Kara <jack@suse.cz> Cc: <stable@vger.kernel.org> [5.4+] Link: https://lkml.kernel.org/r/20200816141204.162624-1-shy828301@gmail.comSigned-off-by:
-
Mrinal Pandey authored
The usage of "capture group (...)" in the immediate condition after `&&` results in `$1` being uninitialized. This issues a warning "Use of uninitialized value $1 in regexp compilation at ./scripts/checkpatch.pl line 2638". I noticed this bug while running checkpatch on the set of commits from v5.7 to v5.8-rc1 of the kernel on the commits with a diff content in their commit message. This bug was introduced in the script by commit e518e9a5 ("checkpatch: emit an error when there's a diff in a changelog"). It has been in the script since then. The author intended to store the match made by capture group in variable `$1`. This should have contained the name of the file as `[\w/]+` matched. However, this couldn't be accomplished due to usage of capture group and `$1` in the same regular expression. Fix this by placing the capture group in the condition before `&&`. Thus, `$1` can be initialized to the text that capture group matches thereby setting it to the desired and required value. Fixes: e518e9a5 ("checkpatch: emit an error when there's a diff in a changelog") Signed-off-by:
Mrinal Pandey <mrinalmni@gmail.com> Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by:
-
Tobias Klauser authored
Commit 32927393 ("sysctl: pass kernel pointers to ->proc_handler") changed ctl_table.proc_handler to take a kernel pointer. Adjust the definition of sysctl_max_threads to match its prototype in linux/sysctl.h which fixes the following sparse error/warning: kernel/fork.c:3050:47: warning: incorrect type in argument 3 (different address spaces) kernel/fork.c:3050:47: expected void * kernel/fork.c:3050:47: got void [noderef] __user *buffer kernel/fork.c:3036:5: error: symbol 'sysctl_max_threads' redeclared with different type (incompatible argument 3 (different address spaces)): kernel/fork.c:3036:5: int extern [addressable] [signed] [toplevel] sysctl_max_threads( ... ) kernel/fork.c: note: in included file (through include/linux/key.h, include/linux/cred.h, include/linux/sched/signal.h, include/linux/sched/cputime.h): include/linux/sysctl.h:242:5: note: previously declared as: include/linux/sysctl.h:242:5: int extern [addressable] [signed] [toplevel] sysctl_max_threads( ... ) Fixes: 32927393 ("sysctl: pass kernel pointers to ->proc_handler") Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
Tobias Klauser authored
Commit 32927393 ("sysctl: pass kernel pointers to ->proc_handler") changed ctl_table.proc_handler to take a kernel pointer. Adjust the signature of proc_ipc_sem_dointvec to match ctl_table.proc_handler which fixes the following sparse error/warning: ipc/ipc_sysctl.c:94:47: warning: incorrect type in argument 3 (different address spaces) ipc/ipc_sysctl.c:94:47: expected void *buffer ipc/ipc_sysctl.c:94:47: got void [noderef] __user *buffer ipc/ipc_sysctl.c:194:35: warning: incorrect type in initializer (incompatible argument 3 (different address spaces)) ipc/ipc_sysctl.c:194:35: expected int ( [usertype] *proc_handler )( ... ) ipc/ipc_sysctl.c:194:35: got int ( * )( ... ) Fixes: 32927393 ("sysctl: pass kernel pointers to ->proc_handler") Signed-off-by:
-
Joerg Roedel authored
__apply_to_page_range() is also used to change and/or allocate page-table pages in the vmalloc area of the address space. Make sure these changes get synchronized to other page-tables in the system by calling arch_sync_kernel_mappings() when necessary. The impact appears limited to x86-32, where apply_to_page_range may miss updating the PMD. That leads to explosions in drivers like BUG: unable to handle page fault for address: fe036000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 00000000 Oops: 0002 [#1] SMP CPU: 3 PID: 1300 Comm: gem_concurrent_ Not tainted 5.9.0-rc1+ #16 Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015 EIP: __execlists_context_alloc+0x132/0x2d0 [i915] Code: 31 d2 89 f0 e8 2f 55 02 00 89 45 e8 3d 00 f0 ff ff 0f 87 11 01 00 00 8b 4d e8 03 4b 30 b8 5a 5a 5a 5a ba 01 00 00 00 8d 79 04 <c7> 01 5a 5a 5a 5a c7 81 fc 0f 00 00 5a 5a 5a 5a 83 e7 fc 29 f9 81 EAX: 5a5a5a5a EBX: f60ca000 ECX: fe036000 EDX: 00000001 ESI: f43b7340 EDI: fe036004 EBP: f6389cb8 ESP: f6389c9c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010286 CR0: 80050033 CR2: fe036000 CR3: 2d361000 CR4: 001506d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: fffe0ff0 DR7: 00000400 Call Trace: execlists_context_alloc+0x10/0x20 [i915] intel_context_alloc_state+0x3f/0x70 [i915] __intel_context_do_pin+0x117/0x170 [i915] i915_gem_do_execbuffer+0xcc7/0x2500 [i915] i915_gem_execbuffer2_ioctl+0xcd/0x1f0 [i915] drm_ioctl_kernel+0x8f/0xd0 drm_ioctl+0x223/0x3d0 __ia32_sys_ioctl+0x1ab/0x760 __do_fast_syscall_32+0x3f/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 EIP: 0xb7f28559 Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: ffffffda EBX: 00000005 ECX: c0406469 EDX: bf95556c ESI: b7e68000 EDI: c0406469 EBP: 00000005 ESP: bf9554d8 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000296 Modules linked in: i915 x86_pkg_temp_thermal intel_powerclamp crc32_pclmul crc32c_intel intel_cstate intel_uncore intel_gtt drm_kms_helper intel_pch_thermal video button autofs4 i2c_i801 i2c_smbus fan CR2: 00000000fe036000 It looks like kasan, xen and i915 are vulnerable. Actual impact is "on thinkpad X60 in 5.9-rc1, screen starts blinking after 30-or-so minutes, and machine is unusable" [sfr@canb.auug.org.au: ARCH_PAGE_TABLE_SYNC_MASK needs vmalloc.h] Link: https://lkml.kernel.org/r/20200825172508.16800a4f@canb.auug.org.au [chris@chris-wilson.co.uk: changelog addition] [pavel@ucw.cz: changelog addition] Fixes: 2ba3e694 ("mm/vmalloc: track which page-table levels were modified") Fixes: 86cf69f1 ("x86/mm/32: implement arch_sync_kernel_mappings()") Signed-off-by:Joerg Roedel <jroedel@suse.de> Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Pavel Machek <pavel@ucw.cz> Acked-by:
-
