- 14 Nov, 2020 6 commits
-
-
Xin Long authored
A call trace was found in Hangbin's Codenomicon testing with debug kernel: [ 2615.981988] ODEBUG: free active (active state 0) object type: timer_list hint: sctp_generate_proto_unreach_event+0x0/0x3a0 [sctp] [ 2615.995050] WARNING: CPU: 17 PID: 0 at lib/debugobjects.c:328 debug_print_object+0x199/0x2b0 [ 2616.095934] RIP: 0010:debug_print_object+0x199/0x2b0 [ 2616.191533] Call Trace: [ 2616.194265] <IRQ> [ 2616.202068] debug_check_no_obj_freed+0x25e/0x3f0 [ 2616.207336] slab_free_freelist_hook+0xeb/0x140 [ 2616.220971] kfree+0xd6/0x2c0 [ 2616.224293] rcu_do_batch+0x3bd/0xc70 [ 2616.243096] rcu_core+0x8b9/0xd00 [ 2616.256065] __do_softirq+0x23d/0xacd [ 2616.260166] irq_exit+0x236/0x2a0 [ 2616.263879] smp_apic_timer_interrupt+0x18d/0x620 [ 2616.269138] apic_timer_interrupt+0xf/0x20 [ 2616.273711] </IRQ> This is because it holds asoc when transport->proto_unreach_timer starts and puts asoc when the timer stops, and without holding transport the transport could be freed when the timer is still running. So fix it by holding/putting transport instead for proto_unreach_timer in transport, just like other timers in transport. v1->v2: - Also use sctp_transport_put() for the "out_unlock:" path in sctp_generate_proto_unreach_event(), as Marcelo noticed. Fixes: 50b5d6ad ("sctp: Fix a race between ICMP protocol unreachable and connect()") Reported-by:Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Link: https://lore.kernel.org/r/102788809b554958b13b95d33440f5448113b8d6.1605331373.git.lucien.xin@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Stefano Garzarella authored
Before commit c0cfa2d8 ("vsock: add multi-transports support"), if a G2H transport was loaded (e.g. virtio transport), every packets was forwarded to the host, regardless of the destination CID. The H2G transports implemented until then (vhost-vsock, VMCI) always responded with an error, if the destination CID was not VMADDR_CID_HOST. From that commit, we are using the remote CID to decide which transport to use, so packets with remote CID > VMADDR_CID_HOST(2) are sent only through H2G transport. If no H2G is available, packets are discarded directly in the guest. Some use cases (e.g. Nitro Enclaves [1]) rely on the old behaviour to implement sibling VMs communication, so we restore the old behavior when no H2G is registered. It will be up to the host to discard packets if the destination is not the right one. As it was already implemented before adding multi-transport support. Tested with nested QEMU/KVM by me and Nitro Enclaves by Andra. [1] Documentation/virt/ne_overview.rst Cc: Jorgen Hansen <jhansen@vmware.com> Cc: Dexuan Cui <decui@microsoft.com> Fixes: c0cfa2d8 ("vsock: add multi-transports support") Reported-by:
Andra Paraschiv <andraprs@amazon.com> Tested-by:
Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20201112133837.34183-1-sgarzare@redhat.comSigned-off-by:
-
Tobias Waldekranz authored
As soon as you add the second port to a VLAN, all other port membership configuration is overwritten with zeroes. The HW interprets this as all ports being "unmodified members" of the VLAN. In the simple case when all ports belong to the same VLAN, switching will still work. But using multiple VLANs or trying to set multiple ports as tagged members will not work. On the 6352, doing a VTU GetNext op, followed by an STU GetNext op will leave you with both the member- and state- data in the VTU/STU data registers. But on the 6097 (which uses the same implementation), the STU GetNext will override the information gathered from the VTU GetNext. Separate the two stages, parsing the result of the VTU GetNext before doing the STU GetNext. We opt to update the existing implementation for all applicable chips, as opposed to creating a separate callback for 6097, because although the previous implementation did work for (at least) 6352, the datasheet does not mention the masking behavior. Fixes: ef6fcea3 ("net: dsa: mv88e6xxx: get STU entry on VTU GetNext") Signed-off-by:
Tobias Waldekranz <tobias@waldekranz.com> Link: https://lore.kernel.org/r/20201112114335.27371-1-tobias@waldekranz.comSigned-off-by:
-
Zhang Changzhong authored
Add the missing clk_disable_unprepare() before return from smsc_phy_probe() in the error handling case. Fixes: bedd8d78 ("net: phy: smsc: LAN8710/20: add phy refclk in support") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/r/1605180239-1792-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by:
-
Zhang Qilong authored
genlmsg_cancel() needs to be called in the error path of inet6_fill_ifmcaddr and inet6_fill_ifacaddr to cancel the message. Fixes: 6ecf4c37 ("ipv6: enable IFA_TARGET_NETNSID for RTM_GETADDR") Reported-by:
Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201112080950.1476302-1-zhangqilong3@huawei.comSigned-off-by:
-
Yi-Hung Wei authored
Currently, we may set the tunnel option flag when the size of metadata is zero. For example, we set TUNNEL_GENEVE_OPT in the receive function no matter the geneve option is present or not. As this may result in issues on the tunnel flags consumers, this patch fixes the issue. Related discussion: * https://lore.kernel.org/netdev/1604448694-19351-1-git-send-email-yihung.wei@gmail.com/T/#u Fixes: 256c87c1 ("net: check tunnel option type in tunnel flags") Signed-off-by:
Yi-Hung Wei <yihung.wei@gmail.com> Link: https://lore.kernel.org/r/1605053800-74072-1-git-send-email-yihung.wei@gmail.comSigned-off-by:
-
- 13 Nov, 2020 11 commits
-
-
Wang Qing authored
We always have to update the value of ret, otherwise the error value may be the previous one. Fixes: f6bd5952 ("net: ethernet: ti: introduce am654 common platform time sync driver") Signed-off-by:
Wang Qing <wangqing@vivo.com> [grygorii.strashko@ti.com: fix build warn, subj add fixes tag] Signed-off-by:
Grygorii Strashko <grygorii.strashko@ti.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20201112164541.3223-1-grygorii.strashko@ti.comSigned-off-by:
-
Wang Hai authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 4c2703df ("net: marvell: prestera: Add PCI interface support") Reported-by:
Wang Hai <wanghai38@huawei.com> Reviewed-by:
Vadym Kochan <vadym.kochan@plvision.eu> Acked-by:
-
Steen Hegelund authored
Selecting VSC8575 as a MACSec PHY was not correct The relevant datasheet can be found here: - VSC8575: https://www.microchip.com/wwwproducts/en/VSC8575 History: v1 -> v2: - Corrected the sha in the "Fixes:" tag Fixes: 1bbe0ecc ("net: phy: mscc: macsec initialization") Signed-off-by:
Steen Hegelund <steen.hegelund@microchip.com> Reviewed-by:
Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/20201113091116.1102450-1-steen.hegelund@microchip.comSigned-off-by:
-
Jeff Dike authored
Commit 58956317 ("neighbor: Improve garbage collection") guarantees neighbour table entries a five-second lifetime. Processes which make heavy use of multicast can fill the neighour table with multicast addresses in five seconds. At that point, neighbour entries can't be GC-ed because they aren't five seconds old yet, the kernel log starts to fill up with "neighbor table overflow!" messages, and sends start to fail. This patch allows multicast addresses to be thrown out before they've lived out their five seconds. This makes room for non-multicast addresses and makes messages to all addresses more reliable in these circumstances. Fixes: 58956317 ("neighbor: Improve garbage collection") Signed-off-by:
Jeff Dike <jdike@akamai.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20201113015815.31397-1-jdike@akamai.comSigned-off-by:
-
Grygorii Strashko authored
Depending on the SoC/platform the CPSW can completely lose context after a suspend/resume cycle, including CPSW wrapper (WR) which will cause reset of WR_C0_MISC_EN register, so CPTS IRQ will became disabled. Fix it by moving CPTS IRQ enabling in cpsw_ndo_open() where CPTS is actually started. Fixes: 84ea9c0a ("net: ethernet: ti: cpsw: enable cpts irq") Reported-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'mac80211-for-net-2020-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== A handful of fixes: * a use-after-free fix in rfkill * a memory leak fix in the mac80211 TX status path * some rate scaling fixes * a fix for the often-reported (by syzbot) sleeping in atomic issue with mac80211's station removal * tag 'mac80211-for-net-2020-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211: mac80211: free sta in sta_info_insert_finish() on errors mac80211: minstrel: fix tx status processing corner case mac80211: minstrel: remove deferred sampling code mac80211: fix memory leak on filtered powersave frames rfkill: Fix use-after-free in rfkill_resume() ==================== Link: https://lore.kernel.org/r/20201113093421.24025-1-johannes@sipsolutions.netSigned-off-by:
-
Johannes Berg authored
If sta_info_insert_finish() fails, we currently keep the station around and free it only in the caller, but there's only one such caller and it always frees it immediately. As syzbot found, another consequence of this split is that we can put things that sleep only into __cleanup_single_sta() and not in sta_info_free(), but this is the only place that requires such of sta_info_free() now. Change this to free the station in sta_info_insert_finish(), in which case we can still sleep. This will also let us unify the cleanup code later. Cc: stable@vger.kernel.org Fixes: dcd479e1 ("mac80211: always wind down STA state") Reported-by: syzbot+32c6c38c4812d22f2f0b@syzkaller.appspotmail.com Reported-by: syzbot+4c81fe92e372d26c4246@syzkaller.appspotmail.com Reported-by: syzbot+6a7fe9faf0d1d61bc24a@syzkaller.appspotmail.com Reported-by: syzbot+abed06851c5ffe010921@syzkaller.appspotmail.com Reported-by: syzbot+b7aeb9318541a1c709f1@syzkaller.appspotmail.com Reported-by: syzbot+d5a9416c6cafe53b5dd0@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20201112112201.ee6b397b9453.I9c31d667a0ea2151441cc64ed6613d36c18a48e0@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Xie He authored
The x25_disconnect function in x25_subr.c would decrease the refcount of "x25->neighbour" (struct x25_neigh) and reset this pointer to NULL. However, the x25_rx_call_request function in af_x25.c, which is called when we receive a connection request, does not increase the refcount when it assigns the pointer. Fix this issue by increasing the refcount of "struct x25_neigh" in x25_rx_call_request. This patch fixes frequent kernel crashes when using AF_X25 sockets. Fixes: 4becb7ee ("net/x25: Fix x25_neigh refcnt leak when x25 disconnect") Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by:
Xie He <xie.he.0141@gmail.com> Link: https://lore.kernel.org/r/20201112103506.5875-1-xie.he.0141@gmail.comSigned-off-by:
-
Zhang Changzhong authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 8c7bd5a4 ("net: ethernet: mtk-star-emac: new driver") Reported-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Link: https://lore.kernel.org/r/1605180879-2573-1-git-send-email-zhangchangzhong@huawei.comSigned-off-by:
-
Vincent Stehlé authored
The ndo_start_xmit() method must return NETDEV_TX_OK if the DMA mapping fails, after freeing the socket buffer. Fix the mtk_star_netdev_start_xmit() function accordingly. Fixes: 8c7bd5a4 ("net: ethernet: mtk-star-emac: new driver") Signed-off-by:
Vincent Stehlé <vincent.stehle@laposte.net> Acked-by:
-
Joel Stanley authored
If a user unbinds and re-binds a NC-SI aware driver the kernel will attempt to register the netlink interface at runtime. The structure is marked __ro_after_init so registration fails spectacularly at this point. # echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/unbind # echo 1e660000.ethernet > /sys/bus/platform/drivers/ftgmac100/bind ftgmac100 1e660000.ethernet: Read MAC address 52:54:00:12:34:56 from chip ftgmac100 1e660000.ethernet: Using NCSI interface 8<--- cut here --- Unable to handle kernel paging request at virtual address 80a8f858 pgd = 8c768dd6 [80a8f858] *pgd=80a0841e(bad) Internal error: Oops: 80d [#1] SMP ARM CPU: 0 PID: 116 Comm: sh Not tainted 5.10.0-rc3-next-20201111-00003-gdd25b227ec1e #51 Hardware name: Generic DT based system PC is at genl_register_family+0x1f8/0x6d4 LR is at 0xff26ffff pc : [<8073f930>] lr : [<ff26ffff>] psr: 20000153 sp : 8553bc80 ip : 81406244 fp : 8553bd04 r10: 8085d12c r9 : 80a8f73c r8 : 85739000 r7 : 00000017 r6 : 80a8f860 r5 : 80c8ab98 r4 : 80a8f858 r3 : 00000000 r2 : 00000000 r1 : 81406130 r0 : 00000017 Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none Control: 00c5387d Table: 85524008 DAC: 00000051 Process sh (pid: 116, stack limit = 0x1f1988d6) ... Backtrace: [<8073f738>] (genl_register_family) from [<80860ac0>] (ncsi_init_netlink+0x20/0x48) r10:8085d12c r9:80c8fb0c r8:85739000 r7:00000000 r6:81218000 r5:85739000 r4:8121c000 [<80860aa0>] (ncsi_init_netlink) from [<8085d740>] (ncsi_register_dev+0x1b0/0x210) r5:8121c400 r4:8121c000 [<8085d590>] (ncsi_register_dev) from [<805a8060>] (ftgmac100_probe+0x6e0/0x778) r10:00000004 r9:80950228 r8:8115bc10 r7:8115ab00 r6:9eae2c24 r5:813b6f88 r4:85739000 [<805a7980>] (ftgmac100_probe) from [<805355ec>] (platform_drv_probe+0x58/0xa8) r9:80c76bb0 r8:00000000 r7:80cd4974 r6:80c76bb0 r5:8115bc10 r4:00000000 [<80535594>] (platform_drv_probe) from [<80532d58>] (really_probe+0x204/0x514) r7:80cd4974 r6:00000000 r5:80cd4868 r4:8115bc10 Jakub pointed out that ncsi_register_dev is obviously broken, because there is only one family so it would never work if there was more than one ncsi netdev. Fix the crash by registering the netlink family once on boot, and drop the code to unregister it. Fixes: 955dc68c ("net/ncsi: Add generic netlink family") Signed-off-by:
Joel Stanley <joel@jms.id.au> Reviewed-by:
Samuel Mendoza-Jonas <sam@mendozajonas.com> Link: https://lore.kernel.org/r/20201112061210.914621-1-joel@jms.id.auSigned-off-by:
-
- 12 Nov, 2020 23 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Current release - regressions: - arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for ENETC Current release - bugs in new features: - mptcp: provide rmem[0] limit offset to fix oops Previous release - regressions: - IPv6: Set SIT tunnel hard_header_len to zero to fix path MTU calculations - lan743x: correctly handle chips with internal PHY - bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE - mlx5e: Fix VXLAN port table synchronization after function reload Previous release - always broken: - bpf: Zero-fill re-used per-cpu map element - fix out-of-order UDP packets when forwarding with UDP GSO fraglists turned on: - fix UDP header access on Fast/frag0 UDP GRO - fix IP header access and skb lookup on Fast/frag0 UDP GRO - ethtool: netlink: add missing netdev_features_change() call - net: Update window_clamp if SOCK_RCVBUF is set - igc: Fix returning wrong statistics - ch_ktls: fix multiple leaks and corner cases in Chelsio TLS offload - tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 replies - r8169: disable hw csum for short packets on all chip versions - vrf: Fix fast path output packet handling with async Netfilter rules" * tag 'net-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits) lan743x: fix use of uninitialized variable net: udp: fix IP header access and skb lookup on Fast/frag0 UDP GRO net: udp: fix UDP header access on Fast/frag0 UDP GRO devlink: Avoid overwriting port attributes of registered port vrf: Fix fast path output packet handling with async Netfilter rules cosa: Add missing kfree in error path of cosa_write net: switch to the kernel.org patchwork instance ch_ktls: stop the txq if reaches threshold ch_ktls: tcb update fails sometimes ch_ktls/cxgb4: handle partial tag alone SKBs ch_ktls: don't free skb before sending FIN ch_ktls: packet handling prior to start marker ch_ktls: Correction in middle record handling ch_ktls: missing handling of header alone ch_ktls: Correction in trimmed_len calculation cxgb4/ch_ktls: creating skbs causes panic ch_ktls: Update cheksum information ch_ktls: Correction in finding correct length cxgb4/ch_ktls: decrypted bit is not enough net/x25: Fix null-ptr-deref in x25_connect ... -
git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Anna Schumaker: "Stable fixes: - Fix failure to unregister shrinker Other fixes: - Fix unnecessary locking to clear up some contention - Fix listxattr receive buffer size - Fix default mount options for nfsroot" * tag 'nfs-for-5.10-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFS: Remove unnecessary inode lock in nfs_fsync_dir() NFS: Remove unnecessary inode locking in nfs_llseek_dir() NFS: Fix listxattr receive buffer size NFSv4.2: fix failure to unregister shrinker nfsroot: Default mount option should ask for built-in NFS version
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI fixes from Rafael Wysocki: "These are mostly docmentation fixes and janitorial changes plus some new device IDs and a new quirk. Specifics: - Fix documentation regarding GPIO properties (Andy Shevchenko) - Fix spelling mistakes in ACPI documentation (Flavio Suligoi) - Fix white space inconsistencies in ACPI code (Maximilian Luz) - Fix string formatting in the ACPI Generic Event Device (GED) driver (Nick Desaulniers) - Add Intel Alder Lake device IDs to the ACPI drivers used by the Dynamic Platform and Thermal Framework (Srinivas Pandruvada) - Add lid-related DMI quirk for Medion Akoya E2228T to the ACPI button driver (Hans de Goede)" * tag 'acpi-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: DPTF: Support Alder Lake Documentation: ACPI: fix spelling mistakes ACPI: button: Add DMI quirk for Medion Akoya E2228T ACPI: GED: fix -Wformat ACPI: Fix whitespace inconsistencies ACPI: scan: Fix acpi_dma_configure_id() kerneldoc name Documentation: firmware-guide: gpio-properties: Clarify initial output state Documentation: firmware-guide: gpio-properties: active_low only for GpioIo() Documentation: firmware-guide: gpio-properties: Fix factual mistakes -
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull power management fixes from Rafael Wysocki: "Make the intel_pstate driver behave as expected when it operates in the passive mode with HWP enabled and the 'powersave' governor on top of it" * tag 'pm-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Take CPUFREQ_GOV_STRICT_TARGET into account cpufreq: Add strict_target to struct cpufreq_policy cpufreq: Introduce CPUFREQ_GOV_STRICT_TARGET cpufreq: Introduce governor flags
-
Sven Van Asbroeck authored
When no devicetree is present, the driver will use an uninitialized variable. Fix by initializing this variable. Fixes: 902a66e0 ("lan743x: correctly handle chips with internal PHY") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Sven Van Asbroeck <thesven73@gmail.com> Link: https://lore.kernel.org/r/20201112152513.1941-1-TheSven73@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Alexander Lobakin says: ==================== net: udp: fix Fast/frag0 UDP GRO While testing UDP GSO fraglists forwarding through driver that uses Fast GRO (via napi_gro_frags()), I was observing lots of out-of-order iperf packets: [ ID] Interval Transfer Bitrate Jitter [SUM] 0.0-40.0 sec 12106 datagrams received out-of-order Simple switch to napi_gro_receive() or any other method without frag0 shortcut completely resolved them. I've found two incorrect header accesses in GRO receive callback(s): - udp_hdr() (instead of udp_gro_udphdr()) that always points to junk in "fast" mode and could probably do this in "regular". This was the actual bug that caused all out-of-order delivers; - udp{4,6}_lib_lookup_skb() -> ip{,v6}_hdr() (instead of skb_gro_network_header()) that potentionally might return odd pointers in both modes. Each patch addresses one of these two issues. This doesn't cover a support for nested tunnels as it's out of the subject and requires more invasive changes. It will be handled separately in net-next series. Credits: Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Willem de Bruijn <willemb@google.com> Since v4 [0]: - split the fix into two logical ones (Willem); - replace ternaries with plain ifs to beautify the code (Jakub); - drop p->data part to reintroduce it later in abovementioned set. Since v3 [1]: - restore the original {,__}udp{4,6}_lib_lookup_skb() and use private versions of them inside GRO code (Willem). Since v2 [2]: - dropped redundant check introduced in v2 as it's performed right before (thanks to Eric); - udp_hdr() switched to data + off for skbs from list (also Eric); - fixed possible malfunction of {,__}udp{4,6}_lib_lookup_skb() with Fast/frag0 due to ip{,v6}_hdr() usage (Willem). Since v1 [3]: - added a NULL pointer check for "uh" as suggested by Willem. [0] https://lore.kernel.org/netdev/Ha2hou5eJPcblo4abjAqxZRzIl1RaLs2Hy0oOAgFs@cp4-web-036.plabs.ch [1] https://lore.kernel.org/netdev/MgZce9htmEtCtHg7pmWxXXfdhmQ6AHrnltXC41zOoo@cp7-web-042.plabs.ch [2] https://lore.kernel.org/netdev/0eaG8xtbtKY1dEKCTKUBubGiC9QawGgB3tVZtNqVdY@cp4-web-030.plabs.ch [3] https://lore.kernel.org/netdev/YazU6GEzBdpyZMDMwJirxDX7B4sualpDG68ADZYvJI@cp4-web-034.plabs.ch ==================== Link: https://lore.kernel.org/r/hjGOh0iCOYyo1FPiZh6TMXcx3YCgNs1T1eGKLrDz8@cp4-web-037.plabs.chSigned-off-by: -
Alexander Lobakin authored
udp{4,6}_lib_lookup_skb() use ip{,v6}_hdr() to get IP header of the packet. While it's probably OK for non-frag0 paths, this helpers will also point to junk on Fast/frag0 GRO when all headers are located in frags. As a result, sk/skb lookup may fail or give wrong results. To support both GRO modes, skb_gro_network_header() might be used. To not modify original functions, add private versions of udp{4,6}_lib_lookup_skb() only to perform correct sk lookups on GRO. Present since the introduction of "application-level" UDP GRO in 4.7-rc1. Misc: replace totally unneeded ternaries with plain ifs. Fixes: a6024562 ("udp: Add GRO functions to UDP socket") Suggested-by:Willem de Bruijn <willemb@google.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
Alexander Lobakin <alobakin@pm.me> Acked-by:
-
Alexander Lobakin authored
UDP GRO uses udp_hdr(skb) in its .gro_receive() callback. While it's probably OK for non-frag0 paths (when all headers or even the entire frame are already in skb head), this inline points to junk when using Fast GRO (napi_gro_frags() or napi_gro_receive() with only Ethernet header in skb head and all the rest in the frags) and breaks GRO packet compilation and the packet flow itself. To support both modes, skb_gro_header_fast() + skb_gro_header_slow() are typically used. UDP even has an inline helper that makes use of them, udp_gro_udphdr(). Use that instead of troublemaking udp_hdr() to get rid of the out-of-order delivers. Present since the introduction of plain UDP GRO in 5.0-rc1. Fixes: e20cf8d3 ("udp: implement GRO for plain UDP sockets.") Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2020-11-10 This series contains updates to i40e and igc drivers and the MAINTAINERS file. Slawomir fixes updating VF MAC addresses to fix various issues related to reporting and setting of these addresses for i40e. Dan Carpenter fixes a possible used before being initialized issue for i40e. Vinicius fixes reporting of netdev stats for igc. Tony updates repositories for Intel Ethernet Drivers. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: MAINTAINERS: Update repositories for Intel Ethernet Drivers igc: Fix returning wrong statistics i40e, xsk: uninitialized variable in i40e_clean_rx_irq_zc() i40e: Fix MAC address setting for a VF via Host/VM ==================== Link: https://lore.kernel.org/r/20201111001955.533210-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Parav Pandit authored
Cited commit in fixes tag overwrites the port attributes for the registered port. Avoid such error by checking registered flag before setting attributes. Fixes: 71ad8d55 ("devlink: Replace devlink_port_attrs_set parameters with a struct") Signed-off-by:
Parav Pandit <parav@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20201111034744.35554-1-parav@nvidia.comSigned-off-by:
-
Martin Willi authored
VRF devices use an optimized direct path on output if a default qdisc is involved, calling Netfilter hooks directly. This path, however, does not consider Netfilter rules completing asynchronously, such as with NFQUEUE. The Netfilter okfn() is called for asynchronously accepted packets, but the VRF never passes that packet down the stack to send it out over the slave device. Using the slower redirect path for this seems not feasible, as we do not know beforehand if a Netfilter hook has asynchronously completing rules. Fix the use of asynchronously completing Netfilter rules in OUTPUT and POSTROUTING by using a special completion function that additionally calls dst_output() to pass the packet down the stack. Also, slightly adjust the use of nf_reset_ct() so that is called in the asynchronous case, too. Fixes: dcdd43c4 ("net: vrf: performance improvements for IPv4") Fixes: a9ec54d1 ("net: vrf: performance improvements for IPv6") Signed-off-by:
Martin Willi <martin@strongswan.org> Link: https://lore.kernel.org/r/20201106073030.3974927-1-martin@strongswan.orgSigned-off-by:
-
Trond Myklebust authored
nfs_inc_stats() is already thread-safe, and there are no other reasons to hold the inode lock here. Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com>
-
Trond Myklebust authored
Remove the contentious inode lock, and instead provide thread safety using the file->f_lock spinlock. Signed-off-by:
-
Chuck Lever authored
Certain NFSv4.2/RDMA tests fail with v5.9-rc1. rpcrdma_convert_kvec() runs off the end of the rl_segments array because rq_rcv_buf.tail[0].iov_len holds a very large positive value. The resultant kernel memory corruption is enough to crash the client system. Callers of rpc_prepare_reply_pages() must reserve an extra XDR_UNIT in the maximum decode size for a possible XDR pad of the contents of the xdr_buf's pages. That guarantees the allocated receive buffer will be large enough to accommodate the usual contents plus that XDR pad word. encode_op_hdr() cannot add that extra word. If it does, xdr_inline_pages() underruns the length of the tail iovec. Fixes: 3e1f0212 ("NFSv4.2: add client side XDR handling for extended attributes") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
-
J. Bruce Fields authored
We forgot to unregister the nfs4_xattr_large_entry_shrinker. That leaves the global list of shrinkers corrupted after unload of the nfs module, after which possibly unrelated code that calls register_shrinker() or unregister_shrinker() gets a BUG() with "supervisor write access in kernel mode". And similarly for the nfs4_xattr_large_entry_lru. Reported-by:
Kris Karas <bugs-a17@moonlit-rail.com> Tested-By:
J. Bruce Fields <bfields@redhat.com> CC: stable@vger.kernel.org Signed-off-by:
-
Rafael J. Wysocki authored
* acpi-scan: ACPI: scan: Fix acpi_dma_configure_id() kerneldoc name * acpi-misc: ACPI: GED: fix -Wformat ACPI: Fix whitespace inconsistencies * acpi-button: ACPI: button: Add DMI quirk for Medion Akoya E2228T * acpi-dptf: ACPI: DPTF: Support Alder Lake
-
Felix Fietkau authored
Some drivers fill the status rate list without setting the rate index after the final rate to -1. minstrel_ht already deals with this, but minstrel doesn't, which causes it to get stuck at the lowest rate on these drivers. Fix this by checking the count as well. Cc: stable@vger.kernel.org Fixes: cccf129f ("mac80211: add the 'minstrel' rate control algorithm") Signed-off-by:
Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20201111183359.43528-3-nbd@nbd.nameSigned-off-by:
-
Felix Fietkau authored
Deferring sampling attempts to the second stage has some bad interactions with drivers that process the rate table in hardware and use the probe flag to indicate probing packets (e.g. most mt76 drivers). On affected drivers it can lead to probing not working at all. If the link conditions turn worse, it might not be such a good idea to do a lot of sampling for lower rates in this case. Fix this by simply skipping the sample attempt instead of deferring it, but keep the checks that would allow it to be sampled if it was skipped too often, but only if it has less than 95% success probability. Also ensure that IEEE80211_TX_CTL_RATE_CTRL_PROBE is set for all probing packets. Cc: stable@vger.kernel.org Fixes: cccf129f ("mac80211: add the 'minstrel' rate control algorithm") Signed-off-by:
-
Felix Fietkau authored
After the status rework, ieee80211_tx_status_ext is leaking un-acknowledged packets for stations in powersave mode. To fix this, move the code handling those packets from __ieee80211_tx_status into ieee80211_tx_status_ext Reported-by:
Tobias Waldvogel <tobias.waldvogel@gmail.com> Fixes: 3318111c ("mac80211: reduce duplication in tx status functions") Signed-off-by:
-
Claire Chang authored
If a device is getting removed or reprobed during resume, use-after-free might happen. For example, h5_btrtl_resume() schedules a work queue for device reprobing, which of course requires removal first. If the removal happens in parallel with the device_resume() and wins the race to acquire device_lock(), removal may remove the device from the PM lists and all, but device_resume() is already running and will continue when the lock can be acquired, thus calling rfkill_resume(). During this, if rfkill_set_block() is then called after the corresponding *_unregister() and kfree() are called, there will be an use-after-free in hci_rfkill_set_block(): BUG: KASAN: use-after-free in hci_rfkill_set_block+0x58/0xc0 [bluetooth] ... Call trace: dump_backtrace+0x0/0x154 show_stack+0x20/0x2c dump_stack+0xbc/0x12c print_address_description+0x88/0x4b0 __kasan_report+0x144/0x168 kasan_report+0x10/0x18 check_memory_region+0x19c/0x1ac __kasan_check_write+0x18/0x24 hci_rfkill_set_block+0x58/0xc0 [bluetooth] rfkill_set_block+0x9c/0x120 rfkill_resume+0x34/0x70 dpm_run_callback+0xf0/0x1f4 device_resume+0x210/0x22c Fix this by checking rfkill->registered in rfkill_resume(). device_del() in rfkill_unregister() requires device_lock() and the whole rfkill_resume() is also protected by the same lock via device_resume(), we can make sure either the rfkill->registered is false before rfkill_resume() starts or the rfkill device won't be unregistered before rfkill_resume() returns. As async_resume() holds a reference to the device, at this level there can be no use-after-free; only in the user that doesn't expect this scenario. Fixes: 8589086f ("Bluetooth: hci_h5: Turn off RTL8723BS on suspend, reprobe on resume") Signed-off-by:
Claire Chang <tientzu@chromium.org> Link: https://lore.kernel.org/r/20201110084908.219088-1-tientzu@chromium.org [edit commit message for clarity and add more info provided later] Signed-off-by:
-
Wang Hai authored
If memory allocation for 'kbuf' succeed, cosa_write() doesn't have a corresponding kfree() in exception handling. Thus add kfree() for this function implementation. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
Jan "Yenya" Kasprzak <kas@fi.muni.cz> Link: https://lore.kernel.org/r/20201110144614.43194-1-wanghai38@huawei.comSigned-off-by:
-
Jakub Kicinski authored
Move to the kernel.org patchwork instance, it has significantly lower latency for accessing from Europe and the US. Other quirks include the reply bot. Link: https://lore.kernel.org/r/20201110035120.642746-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Rohit Maheshwari says: ==================== cxgb4/ch_ktls: Fixes in nic tls code This series helps in fixing multiple nic ktls issues. Series is broken into 12 patches. Patch 1 avoids deciding tls packet based on decrypted bit. If its a retransmit packet which has tls handshake and finish (for encryption), decrypted bit won't be set there, and so we can't rely on decrypted bit. Patch 2 helps supporting linear skb. SKBs were assumed non-linear. Corrected the length extraction. Patch 3 fixes the checksum offload update in WR. Patch 4 fixes kernel panic happening due to creating new skb for each record. As part of fix driver will use same skb to send out one tls record (partial data) of the same SKB. Patch 5 fixes the problem of skb data length smaller than remaining data of the record. Patch 6 fixes the handling of SKBs which has tls header alone pkt, but not starting from beginning. Patch 7 avoids sending extra data which is used to make a record 16 byte aligned. We don't need to retransmit those extra few bytes. Patch 8 handles the cases where retransmit packet has tls starting exchanges which are prior to tls start marker. Patch 9 fixes the problem os skb free before HW knows about tcp FIN. Patch 10 handles the small packet case which has partial TAG bytes only. HW can't handle those, hence using sw crypto for such pkts. Patch 11 corrects the potential tcb update problem. Patch 12 stops the queue if queue reaches threshold value. v1->v2: - Corrected fixes tag issue. - Marked chcr_ktls_sw_fallback() static. v2->v3: - Replaced GFP_KERNEL with GFP_ATOMIC. - Removed mixed fixes. v3->v4: - Corrected fixes tag issue. v4->v5: - Separated mixed fixes from patch 4. v5-v6: - Fixes tag should be at the end. ==================== Link: https://lore.kernel.org/r/20201109105142.15398-1-rohitm@chelsio.comSigned-off-by:
-
