- 17 Aug, 2016 3 commits
-
-
Ido Schimmel authored
After registering a netdevice it's possible for user space applications to configure an IP address on it. From the driver's perspective, this means a router interface (RIF) should be created for the PVID vPort. Therefore, we must create the PVID vPort before registering the netdevice. Fixes: 99724c18 ("mlxsw: spectrum: Introduce support for router interfaces") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Currently, when device configuration fails we emit errors to the kernel log despite the fact we already get these from the EMAD transaction layer, so remove them. In addition to being unnecessary, removing these error messages will allow us to reuse mlxsw_sp_port_add_vid() to create the PVID vPort before registering the netdevice. Fixes: 99724c18 ("mlxsw: spectrum: Introduce support for router interfaces") Signed-off-by:
-
Ido Schimmel authored
When removing a VLAN filter from the device we shouldn't return upon the first error we encounter, as otherwise we'll have resources that will never be freed nor used. Instead, we should keep trying to free as much resources as possible in a best effort mode. Remove the error message as well, since we already get these from the EMAD transaction code. Fixes: 99724c18 ("mlxsw: spectrum: Introduce support for router interfaces") Signed-off-by:
-
- 16 Aug, 2016 4 commits
-
-
David S. Miller authored
Sean Wang says: ==================== mediatek: Fix warning and issue This patch set fixes the following warning and issues v1 -> v2: Fix message typos and add coverletter v2 -> v3: Split from the previous series for submitting bug fixes as a series targeting 'net' ==================== Signed-off-by: -
sean.wang@mediatek.com authored
net: ethernet: mediatek: fix runtime warning raised by inconsistent struct device pointers passed to DMA API Runtime warning occurs if DMA-API debug feature is enabled that would be raised by pointers passed to DMA API as arguments to inconsistent struct device objects, so that the patch makes them usage aligned between DMA operations such as dma_map_*() and dma_unmap_*() to eliminate the warning. Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
sean.wang@mediatek.com authored
Commit 08ef55c6 ("net-next: mediatek: fix gigabit and flow control advertisement") had supported proper flow control settings for GMAC1. But for GMAC0, 1.GMAC0 shares the common logic with GMAC1 inside mtk_phy_link_adjust() to adapt various settings for the target phy. 2.GMAC0 uses fixed-phy to connect to a builtin gigabit switch with fixed link speed as commit 0c72c50f ("net-next: mediatek: add fixed-phy support") describes. 3.However, fixed-phy doesn't enable SUPPORTED_Pause & SUPPORTED_Asym_Pause supported flag on default that would cause mtk_phy_link_adjust() not to enable flow control setting on GMAC0 properly and cause packet dropped when high traffic. Due to these reasons, the patch adds SUPPORTED_Pause & SUPPORTED_Asym_Pause supported flags on fixed-phy used by the driver to have proper handling on the both GMAC with the shared common logic. Signed-off-by:
-
sean.wang@mediatek.com authored
The patch fixes up the incorrect setup of reduced MII (RMII) on GMAC and adds the supplement for the setup of reverse MII (REVMII) on GMAC , and rearranges the error handling for invalid PHY argument. Signed-off-by:
-
- 15 Aug, 2016 12 commits
-
-
Vegard Nossum authored
tipc_msg_create() can return a NULL skb and if so, we shouldn't try to call tipc_node_xmit_skb() on it. general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 3 PID: 30298 Comm: trinity-c0 Not tainted 4.7.0-rc7+ #19 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 task: ffff8800baf09980 ti: ffff8800595b8000 task.ti: ffff8800595b8000 RIP: 0010:[<ffffffff830bb46b>] [<ffffffff830bb46b>] tipc_node_xmit_skb+0x6b/0x140 RSP: 0018:ffff8800595bfce8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000003023b0e0 RDX: 0000000000000000 RSI: dffffc0000000000 RDI: ffffffff83d12580 RBP: ffff8800595bfd78 R08: ffffed000b2b7f32 R09: 0000000000000000 R10: fffffbfff0759725 R11: 0000000000000000 R12: 1ffff1000b2b7f9f R13: ffff8800595bfd58 R14: ffffffff83d12580 R15: dffffc0000000000 FS: 00007fcdde242700(0000) GS:ffff88011af80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fcddde1db10 CR3: 000000006874b000 CR4: 00000000000006e0 DR0: 00007fcdde248000 DR1: 00007fcddd73d000 DR2: 00007fcdde248000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000090602 Stack: 0000000000000018 0000000000000018 0000000041b58ab3 ffffffff83954208 ffffffff830bb400 ffff8800595bfd30 ffffffff8309d767 0000000000000018 0000000000000018 ffff8800595bfd78 ffffffff8309da1a 00000000810ee611 Call Trace: [<ffffffff830c84a3>] tipc_shutdown+0x553/0x880 [<ffffffff825b4a3b>] SyS_shutdown+0x14b/0x170 [<ffffffff8100334c>] do_syscall_64+0x19c/0x410 [<ffffffff83295ca5>] entry_SYSCALL64_slow_path+0x25/0x25 Code: 90 00 b4 0b 83 c7 00 f1 f1 f1 f1 4c 8d 6d e0 c7 40 04 00 00 00 f4 c7 40 08 f3 f3 f3 f3 48 89 d8 48 c1 e8 03 c7 45 b4 00 00 00 00 <80> 3c 30 00 75 78 48 8d 7b 08 49 8d 75 c0 48 b8 00 00 00 00 00 RIP [<ffffffff830bb46b>] tipc_node_xmit_skb+0x6b/0x140 RSP <ffff8800595bfce8> ---[ end trace 57b0484e351e71f1 ]--- I feel like we should maybe return -ENOMEM or -ENOBUFS, but I'm not sure userspace is equipped to handle that. Anyway, this is better than a GPF and looks somewhat consistent with other tipc_msg_create() callers. Signed-off-by:Vegard Nossum <vegard.nossum@oracle.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
David S. Miller authored
Vitaly Kuznetsov says: ==================== hv_netvsc: fixes for VF removal path Kernel crash is reported after VF is removed and detached from netvsc device. Turns out we have multiple different (but related) issues on the VF removal path which I'm trying to address with PATCHes 2-5 of this series. PATCH1 is required to support the change. Changes since v1: - Re-arrange patches in the series to not introduce new issues [David Miller] - Add PATCH5 which fixes a new issue I discovered while testing. - Add Haiyang' A-b tags to PATCH1-4 With regards to Stephen's suggestion: I believe that switching to using RCU and eliminating vf_use_cnt/vf_inject is the right thing to do long-term, we can either put this on top of this series or do it later in net-next. ==================== Signed-off-by: -
Vitaly Kuznetsov authored
Bonding driver sets IFF_BONDING on both master (the bonding device) and slave (the real NIC) devices and in netvsc_netdev_event() we want to skip master devices only. Currently, there is an uncertainty when a slave interface is removed: if bonding module comes first in netdev_chain it clears IFF_BONDING flag on the netdev and netvsc_netdev_event() correctly handles NETDEV_UNREGISTER event, but in case netvsc comes first on the chain it sees the device with IFF_BONDING still attached and skips it. As we still hold vf_netdev pointer to the device we crash on the next inject. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Vitaly Kuznetsov authored
We're not guaranteed to see NETDEV_REGISTER/NETDEV_UNREGISTER notifications only once per VF but we increase/decrease module refcount unconditionally. Check vf_netdev to make sure we don't take/release it twice. We presume that only one VF per netvsc device may exist. Signed-off-by:
-
Vitaly Kuznetsov authored
We reset vf_inject on VF going down (netvsc_vf_down()) but we don't on VF removal (netvsc_unregister_vf()) so vf_inject stays 'true' while vf_netdev is already NULL and we're trying to inject packets into NULL net device in netvsc_recv_callback() causing kernel to crash. Signed-off-by:
-
Vitaly Kuznetsov authored
Here is a deadlock scenario: - netvsc_vf_up() schedules netvsc_notify_peers() work and quits. - netvsc_vf_down() runs before netvsc_notify_peers() gets executed. As it is being executed from netdev notifier chain we hold rtnl lock when we get here. - we enter while (atomic_read(&net_device_ctx->vf_use_cnt) != 0) loop and wait till netvsc_notify_peers() drops vf_use_cnt. - netvsc_notify_peers() starts on some other CPU but netdev_notify_peers() will hang on rtnl_lock(). - deadlock! Instead of introducing additional synchronization I suggest we drop gwrk.dwrk completely and call NETDEV_NOTIFY_PEERS directly. As we're acting under rtnl lock this is legitimate. Signed-off-by:
-
Vitaly Kuznetsov authored
struct netvsc_device is not suitable for storing VF information as this structure is being destroyed on MTU change / set channel operation (see rndis_filter_device_remove()). Move all VF related stuff to struct net_device_context which is persistent. Signed-off-by:
-
Simon Horman authored
Ensure that the inner_protocol is set on transmit so that GSO segmentation, which relies on that field, works correctly. This is achieved by setting the inner_protocol in gre_build_header rather than each caller of that function. It ensures that the inner_protocol is set when gre_fb_xmit() is used to transmit GRE which was not previously the case. I have observed this is not the case when OvS transmits GRE using lwtunnel metadata (which it always does). Fixes: 38720352 ("gre: Use inner_proto to obtain inner header protocol") Cc: Pravin Shelar <pshelar@ovn.org> Acked-by:
Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Acked-by:
Pravin B Shelar <pshelar@ovn.org> Signed-off-by:
-
Lorenzo Colitti authored
ping_v6_sendmsg does not set flowi6_oif in response to sin6_scope_id or sk_bound_dev_if, so it is not possible to use these APIs to ping an IPv6 address on a different interface. Instead, it sets flowi6_iif, which is incorrect but harmless. Stop setting flowi6_iif, and support various ways of setting oif in the same priority order used by udpv6_sendmsg. Tested: https://android-review.googlesource.com/#/c/254470/Signed-off-by:
Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
-
Vegard Nossum authored
I got this: ================================================================================ UBSAN: Undefined behaviour in ./include/linux/log2.h:63:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 1 PID: 721 Comm: kworker/1:1 Not tainted 4.8.0-rc1+ #87 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 Workqueue: events rht_deferred_worker 0000000000000000 ffff88011661f8d8 ffffffff82344f50 0000000041b58ab3 ffffffff84f98000 ffffffff82344ea4 ffff88011661f900 ffff88011661f8b0 0000000000000001 ffff88011661f6b8 dffffc0000000000 ffffffff867f7640 Call Trace: [<ffffffff82344f50>] dump_stack+0xac/0xfc [<ffffffff82344ea4>] ? _atomic_dec_and_lock+0xc4/0xc4 [<ffffffff8242f5b8>] ubsan_epilogue+0xd/0x8a [<ffffffff82430c41>] __ubsan_handle_shift_out_of_bounds+0x255/0x29a [<ffffffff824309ec>] ? __ubsan_handle_out_of_bounds+0x180/0x180 [<ffffffff84003436>] ? nl80211_req_set_reg+0x256/0x2f0 [<ffffffff812112ba>] ? print_context_stack+0x8a/0x160 [<ffffffff81200031>] ? amd_pmu_reset+0x341/0x380 [<ffffffff823af808>] rht_deferred_worker+0x1618/0x1790 [<ffffffff823af808>] ? rht_deferred_worker+0x1618/0x1790 [<ffffffff823ae1f0>] ? rhashtable_jhash2+0x370/0x370 [<ffffffff8134c12d>] ? process_one_work+0x6fd/0x1970 [<ffffffff8134c1cf>] process_one_work+0x79f/0x1970 [<ffffffff8134c12d>] ? process_one_work+0x6fd/0x1970 [<ffffffff8134ba30>] ? try_to_grab_pending+0x4c0/0x4c0 [<ffffffff8134d564>] ? worker_thread+0x1c4/0x1340 [<ffffffff8134d8ff>] worker_thread+0x55f/0x1340 [<ffffffff845e904f>] ? __schedule+0x4df/0x1d40 [<ffffffff8134d3a0>] ? process_one_work+0x1970/0x1970 [<ffffffff8134d3a0>] ? process_one_work+0x1970/0x1970 [<ffffffff813642f7>] kthread+0x237/0x390 [<ffffffff813640c0>] ? __kthread_parkme+0x280/0x280 [<ffffffff845f8c93>] ? _raw_spin_unlock_irq+0x33/0x50 [<ffffffff845f95df>] ret_from_fork+0x1f/0x40 [<ffffffff813640c0>] ? __kthread_parkme+0x280/0x280 ================================================================================ roundup_pow_of_two() is undefined when called with an argument of 0, so let's avoid the call and just fall back to ht->p.min_size (which should never be smaller than HASH_MIN_SIZE). Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Vincent authored
In mlxsw_sp_router_fib4_add_info_destroy(), the fib_entry pointer is used after it has been freed by mlxsw_sp_fib_entry_destroy(). Use a temporary variable to fix this. Fixes: 61c503f9 ("mlxsw: spectrum_router: Implement fib4 add/del switchdev obj ops") Signed-off-by:
Vincent Stehlé <vincent.stehle@laposte.net> Cc: Jiri Pirko <jiri@mellanox.com> Acked-by:
-
Florian Westphal authored
Sander reports following splat after netfilter nat bysrc table got converted to rhashtable: swapper/0: page allocation failure: order:3, mode:0x2084020(GFP_ATOMIC|__GFP_COMP) CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.0-rc1 [..] [<ffffffff811633ed>] warn_alloc_failed+0xdd/0x140 [<ffffffff811638b1>] __alloc_pages_nodemask+0x3e1/0xcf0 [<ffffffff811a72ed>] alloc_pages_current+0x8d/0x110 [<ffffffff8117cb7f>] kmalloc_order+0x1f/0x70 [<ffffffff811aec19>] __kmalloc+0x129/0x140 [<ffffffff8146d561>] bucket_table_alloc+0xc1/0x1d0 [<ffffffff8146da1d>] rhashtable_insert_rehash+0x5d/0xe0 [<ffffffff819fcfff>] nf_nat_setup_info+0x2ef/0x400 The failure happens when allocating the spinlock array. Even with GFP_KERNEL its unlikely for such a large allocation to succeed. Thomas Graf pointed me at inet_ehash_locks_alloc(), so in addition to adding NOWARN for atomic allocations this also makes the bucket-array sizing more conservative. In commit 095dc8e0 ("tcp: fix/cleanup inet_ehash_locks_alloc()"), Eric Dumazet says: "Budget 2 cache lines per cpu worth of 'spinlocks'". IOW, consider size needed by a single spinlock when determining number of locks per cpu. So with 64 byte per cacheline and 4 byte per spinlock this gives 32 locks per cpu. Resulting size of the lock-array (sizeof(spinlock) == 4): cpus: 1 2 4 8 16 32 64 old: 1k 1k 4k 8k 16k 16k 16k new: 128 256 512 1k 2k 4k 8k 8k allocation should have decent chance of success even with GFP_ATOMIC, and should not fail with GFP_KERNEL. With 72-byte spinlock (LOCKDEP): cpus : 1 2 old: 9k 18k new: ~2k ~4k Reported-by:
Sander Eikelenboom <linux@eikelenboom.it> Suggested-by:
Thomas Graf <tgraf@suug.ch> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
- 13 Aug, 2016 12 commits
-
-
Sabrina Dubroca authored
The idea for type_check in dev_get_nest_level() was to count the number of nested devices of the same type (currently, only macvlan or vlan devices). This prevented the false positive lockdep warning on configurations such as: eth0 <--- macvlan0 <--- vlan0 <--- macvlan1 However, this doesn't prevent a warning on a configuration such as: eth0 <--- macvlan0 <--- vlan0 eth1 <--- vlan1 <--- macvlan1 In this case, all the locks end up with a nesting subclass of 1, so lockdep thinks that there is still a deadlock: - in the first case we have (macvlan_netdev_addr_lock_key, 1) and then take (vlan_netdev_xmit_lock_key, 1) - in the second case, we have (vlan_netdev_xmit_lock_key, 1) and then take (macvlan_netdev_addr_lock_key, 1) By removing the linktype check in dev_get_nest_level() and always incrementing the nesting depth, lockdep considers this configuration valid. Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
Sabrina Dubroca authored
Currently, trying to setup a vlan over a macsec device, or other combinations of devices, triggers a lockdep warning. Use netdev_lockdep_set_classes and ndo_get_lock_subclass, similar to what macvlan does. Signed-off-by:
-
Mike Manning authored
If IPv6 is disabled when the option is set to keep IPv6 addresses on link down, userspace is unaware of this as there is no such indication via netlink. The solution is to remove the IPv6 addresses in this case, which results in netlink messages indicating removal of addresses in the usual manner. This fix also makes the behavior consistent with the case of having IPv6 disabled first, which stops IPv6 addresses from being added. Fixes: f1705ec1 ("net: ipv6: Make address flushing on ifdown optional") Signed-off-by:
Mike Manning <mmanning@brocade.com> Acked-by:
David Ahern <dsa@cumulusnetworks.com> Signed-off-by:
-
Vegard Nossum authored
sctp_transport_seq_start() does not currently clear iter->start_fail on success, but relies on it being zero when it is allocated (by seq_open_net()). This can be a problem in the following sequence: open() // allocates iter (and implicitly sets iter->start_fail = 0) read() - iter->start() // fails and sets iter->start_fail = 1 - iter->stop() // doesn't call sctp_transport_walk_stop() (correct) read() again - iter->start() // succeeds, but doesn't change iter->start_fail - iter->stop() // doesn't call sctp_transport_walk_stop() (wrong) We should initialize sctp_ht_iter::start_fail to zero if ->start() succeeds, otherwise it's possible that we leave an old value of 1 there, which will cause ->stop() to not call sctp_transport_walk_stop(), which causes all sorts of problems like not calling rcu_read_unlock() (and preempt_enable()), eventually leading to more warnings like this: BUG: sleeping function called from invalid context at mm/slab.h:388 in_atomic(): 0, irqs_disabled(): 0, pid: 16551, name: trinity-c2 Preemption disabled at:[<ffffffff819bceb6>] rhashtable_walk_start+0x46/0x150 [<ffffffff81149abb>] preempt_count_add+0x1fb/0x280 [<ffffffff83295892>] _raw_spin_lock+0x12/0x40 [<ffffffff819bceb6>] rhashtable_walk_start+0x46/0x150 [<ffffffff82ec665f>] sctp_transport_walk_start+0x2f/0x60 [<ffffffff82edda1d>] sctp_transport_seq_start+0x4d/0x150 [<ffffffff81439e50>] traverse+0x170/0x850 [<ffffffff8143aeec>] seq_read+0x7cc/0x1180 [<ffffffff814f996c>] proc_reg_read+0xbc/0x180 [<ffffffff813d0384>] do_loop_readv_writev+0x134/0x210 [<ffffffff813d2a95>] do_readv_writev+0x565/0x660 [<ffffffff813d6857>] vfs_readv+0x67/0xa0 [<ffffffff813d6c16>] do_preadv+0x126/0x170 [<ffffffff813d710c>] SyS_preadv+0xc/0x10 [<ffffffff8100334c>] do_syscall_64+0x19c/0x410 [<ffffffff83296225>] return_from_SYSCALL_64+0x0/0x6a [<ffffffffffffffff>] 0xffffffffffffffff Notice that this is a subtly different stacktrace from the one in commit 5fc382d8 ("net/sctp: terminate rhashtable walk correctly"). Cc: Xin Long <lucien.xin@gmail.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:Neil Horman <nhorman@tuxdriver.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Vegard Nossum authored
If iriap_register_lsap() fails to allocate memory, self->lsap is set to NULL. However, none of the callers handle the failure and irlmp_connect_request() will happily dereference it: iriap_register_lsap: Unable to allocated LSAP! ================================================================================ UBSAN: Undefined behaviour in net/irda/irlmp.c:378:2 member access within null pointer of type 'struct lsap_cb' CPU: 1 PID: 15403 Comm: trinity-c0 Not tainted 4.8.0-rc1+ #81 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 0000000000000000 ffff88010c7e78a8 ffffffff82344f40 0000000041b58ab3 ffffffff84f98000 ffffffff82344e94 ffff88010c7e78d0 ffff88010c7e7880 ffff88010630ad00 ffffffff84a5fae0 ffffffff84d3f5c0 000000000000017a Call Trace: [<ffffffff82344f40>] dump_stack+0xac/0xfc [<ffffffff8242f5a8>] ubsan_epilogue+0xd/0x8a [<ffffffff824302bf>] __ubsan_handle_type_mismatch+0x157/0x411 [<ffffffff83b7bdbc>] irlmp_connect_request+0x7ac/0x970 [<ffffffff83b77cc0>] iriap_connect_request+0xa0/0x160 [<ffffffff83b77f48>] state_s_disconnect+0x88/0xd0 [<ffffffff83b78904>] iriap_do_client_event+0x94/0x120 [<ffffffff83b77710>] iriap_getvaluebyclass_request+0x3e0/0x6d0 [<ffffffff83ba6ebb>] irda_find_lsap_sel+0x1eb/0x630 [<ffffffff83ba90c8>] irda_connect+0x828/0x12d0 [<ffffffff833c0dfb>] SYSC_connect+0x22b/0x340 [<ffffffff833c7e09>] SyS_connect+0x9/0x10 [<ffffffff81007bd3>] do_syscall_64+0x1b3/0x4b0 [<ffffffff845f946a>] entry_SYSCALL64_slow_path+0x25/0x25 ================================================================================ The bug seems to have been around since forever. There's more problems with missing error checks in iriap_init() (and indeed all of irda_init()), but that's a bigger problem that needs very careful review and testing. This patch will fix the most serious bug (as it's easily reached from unprivileged userspace). I have tested my patch with a reproducer. Signed-off-by: -
Johannes Berg authored
Pass the correct type __wsum to csum_sub() and csum_add(). This doesn't really change anything since __wsum really *is* __be32, but removes the address space warnings from sparse. Cc: Eric Dumazet <edumazet@google.com> Fixes: 34ae6a1a ("ipv6: update skb->csum when CE mark is propagated") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Daniel Borkmann authored
Fix the bpf_try_make_writable() helper and all call sites we have in BPF, it's currently defect with regards to skbs when the write_len spans into non-linear parts, no matter if cloned or not. There are multiple issues at once. First, using skb_store_bits() is not correct since even if we have a cloned skb, page frags can still be shared. To really make them private, we need to pull them in via __pskb_pull_tail() first, which also gets us a private head via pskb_expand_head() implicitly. This is for helpers like bpf_skb_store_bytes(), bpf_l3_csum_replace(), bpf_l4_csum_replace(). Really, the only thing reasonable and working here is to call skb_ensure_writable() before any write operation. Meaning, via pskb_may_pull() it makes sure that parts we want to access are pulled in and if not does so plus unclones the skb implicitly. If our write_len still fits the headlen and we're cloned and our header of the clone is not writable, then we need to make a private copy via pskb_expand_head(). skb_store_bits() is a bit misleading and only safe to store into non-linear data in different contexts such as 357b40a1 ("[IPV6]: IPV6_CHECKSUM socket option can corrupt kernel memory"). For above BPF helper functions, it means after fixed bpf_try_make_writable(), we've pulled in enough, so that we operate always based on skb->data. Thus, the call to skb_header_pointer() and skb_store_bits() becomes superfluous. In bpf_skb_store_bytes(), the len check is unnecessary too since it can only pass in maximum of BPF stack size, so adding offset is guaranteed to never overflow. Also bpf_l3/4_csum_replace() helpers must test for proper offset alignment since they use __sum16 pointer for writing resulting csum. The remaining helpers that change skb data not discussed here yet are bpf_skb_vlan_push(), bpf_skb_vlan_pop() and bpf_skb_change_proto(). The vlan helpers internally call either skb_ensure_writable() (pop case) and skb_cow_head() (push case, for head expansion), respectively. Similarly, bpf_skb_proto_xlat() takes care to not mangle page frags. Fixes: 608cd71a ("tc: bpf: generalize pedit action") Fixes: 91bc4822 ("tc: bpf: add checksum helpers") Fixes: 3697649f ("bpf: try harder on clones when writing into skb") Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
sean.wang@mediatek.com authored
This patch adds the missing of_node_put() after finishing the usage of of_parse_phandle() or of_node_get() used by fixed_phy. Signed-off-by:
-
sean.wang@mediatek.com authored
To fix runtime warning with lockdep is enabled due that u64_stats_sync is not initialized well, so add it. Signed-off-by:
-
Colin Ian King authored
Currently, if calipso_genopt fails then the error exit path does not free the ipv6_opt_hdr new causing a memory leak. Fix this by kfree'ing new on the error exit path. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Daniel Borkmann authored
While hashing out BPF's current_task_under_cgroup helper bits, it came to discussion that the skb_in_cgroup helper name was suboptimally chosen. Tejun says: So, I think in_cgroup should mean that the object is in that particular cgroup while under_cgroup in the subhierarchy of that cgroup. Let's rename the other subhierarchy test to under too. I think that'd be a lot less confusing going forward. [...] It's more intuitive and gives us the room to implement the real "in" test if ever necessary in the future. Since this touches uapi bits, we need to change this as long as v4.8 is not yet officially released. Thus, change the helper enum and rename related bits. Fixes: 4a482f34 ("cgroup: bpf: Add bpf_skb_in_cgroup_proto") Reference: http://patchwork.ozlabs.org/patch/658500/Suggested-by:
Sargun Dhillon <sargun@sargun.me> Suggested-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
When CONFIG_NET_DSA_HWMON is disabled, we get warnings about two unused functions whose only callers are all inside of an #ifdef: drivers/net/dsa/mv88e6xxx.c:3257:12: 'mv88e6xxx_mdio_page_write' defined but not used [-Werror=unused-function] drivers/net/dsa/mv88e6xxx.c:3244:12: 'mv88e6xxx_mdio_page_read' defined but not used [-Werror=unused-function] This adds another ifdef around the function definitions. The warnings appeared after the functions were marked 'static', but the problem was already there before that. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 57d32310 ("net: dsa: mv88e6xxx: fix style issues") Reviewed-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
-
- 11 Aug, 2016 5 commits
-
-
Sabrina Dubroca authored
macsec_notify() loops over the list of macsec devices configured on the underlying device when this device is being removed. This list is part of the rx_handler data. However, macsec_dellink unregisters the rx_handler and frees the rx_handler data when the last macsec device is removed from the underlying device. Add macsec_common_dellink() to delete macsec devices without unregistering the rx_handler and freeing the associated data. Fixes: 960d5848 ("macsec: fix memory leaks around rx_handler (un)registration") Signed-off-by:
-
Jason Wang authored
We've clean skb_array in macvtap_put_queue() but still try to pop from it during macvtap_sock_destruct(). Fix this use after free by moving the skb array cleanup to macvtap_sock_destruct() instead. Fixes: 362899b8 ("macvtap: switch to use skb array") Reported-by:
Cornelia Huck <cornelia.huck@de.ibm.com> Tested-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Martynas Pumputis authored
The creation of a tunnel vport (geneve, gre, vxlan) brings up a corresponding netdev, a multi-step operation which can fail. For example, changing a vxlan vport's netdev state to 'up' binds the vport's socket to a UDP port - if the binding fails (e.g. due to the port being in use), the error is currently ignored giving the appearance that the tunnel vport creation completed successfully. Signed-off-by:
Martynas Pumputis <martynas@weave.works> Acked-by:
-
Fabian Frederick authored
s/gamc/gmac/ Signed-off-by:
Fabian Frederick <fabf@skynet.be> Signed-off-by:
-
Parthasarathy Bhuvaragan authored
In commit cf6f7e1d ("tipc: dump monitor attributes"), I dereferenced a pointer before checking if its valid. This is reported by static check Smatch as: net/tipc/monitor.c:733 tipc_nl_add_monitor_peer() warn: variable dereferenced before check 'mon' (see line 731) In this commit, we check for a valid monitor before proceeding with any other operation. Fixes: cf6f7e1d ("tipc: dump monitor attributes") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by:
-
- 10 Aug, 2016 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Use mod_timer_pending() to avoid reactivating a dead expectation in the h323 conntrack helper, from Liping Zhang. 2) Oneliner to fix a type in the register name defined in the nf_tables header. 3) Don't try to look further when we find an inactive elements with no descendants in the rbtree set implementation, otherwise we crash. 4) Handle valid zero CSeq in the SIP conntrack helper, from Christophe Leroy. 5) Don't display a trailing slash in conntrack helper with no classes via /proc/net/nf_conntrack_expect, from Liping Zhang. 6) Fix an expectation leak during creation from the nfqueue path, again from Liping Zhang. 7) Validate netlink port ID in verdict message from nfqueue, otherwise an injection can be possible. Again from Zhang. 8) Reject conntrack tuples with different transport protocol on original and reply tuples, also from Zhang. 9) Validate offset and length in nft_exthdr, make sure they are under sizeof(u8), from Laura Garcia Liebana. ==================== Signed-off-by: -
Laura Garcia Liebana authored
Fix the direct assignment of offset and length attributes included in nft_exthdr structure from u32 data to u8. Signed-off-by:
Laura Garcia Liebana <nevola@gmail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Toshiaki Makita authored
Adding fdb entries pointing to the bridge device uses fdb_insert(), which lacks various checks and does not respect added_by_user flag. As a result, some inconsistent behavior can happen: * Adding temporary entries succeeds but results in permanent entries. * Same goes for "dynamic" and "use". * Changing mac address of the bridge device causes deletion of user-added entries. * Replacing existing entries looks successful from userspace but actually not, regardless of NLM_F_EXCL flag. Use the same logic as other entries and fix them. Fixes: 3741873b ("bridge: allow adding of fdb entries pointing to the bridge device") Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
- 09 Aug, 2016 1 commit
-
-
Wenyou Yang authored
Disable all interrupts when suspend, they will be enabled when resume. Otherwise, the suspend/resume process will be blocked occasionally. Signed-off-by:
Wenyou Yang <wenyou.yang@atmel.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
