- 11 Aug, 2010 40 commits
-
-
Roy Zang authored
Signed-off-by:
Roy Zang <tie-fei.zang@freescale.com> Cc: Jerry Huang <Chang-Ming.Huang@freescale.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jerry Huang authored
Add auto CMD12 command support for eSDHC driver. This is needed by P4080 and P1022 for block read/write. Manual asynchronous CMD12 abort operation causes protocol violations on these silicons. Signed-off-by:
Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by:
-
Marek Szyprowski authored
This patch adds support for regulator API to sdhci core driver. Regulators can be used to disable power in suspended state to reduce dissipated energy. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Acked-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
-
Marek Szyprowski authored
On some Samsung SoCs not all SDHCI controllers have card detect (CD) line. For some embedded designs it is not even needed, because ususally the device (like SDIO flash memory or wifi controller) is permanently wired to the controller. There are also systems which have a card detect line connected to some of the external interrupt lines or the presence of the card depends on some other actions (like enabling a power regulator). This patch adds support for all these cases. The following card detection methods are possible: 1. internal sdhci host card detect line 2. external event 3. external gpio interrupt 4. no card detect line, controller will poll for the card 5. no card detect line, card is permanently wired to the controller (once detected host won't poll it any more) By default, all existing code would use method #1, what is compatible with the previous version of the driver. In case of external event, two callbacks must be provided in platdata: ext_cd_init and ext_cd_cleanup. Both of them get a callback to a function that notifies the s3c-sdhci host contoller as their argument. That callback function should be called from the even dispatcher to let host notice the card insertion/removal. In case of external gpio interrupt, a gpio pin number must be provided in platdata (ext_cd_gpio parameter), as well as the information about the polarity of that gpio pin (ext_cd_gpio_invert). By default (ext_cd_gpio_invert == 0) gpio value 0 means 'card has been removed', but this can be changed to 'card has been removed' when ext_cd_gpio_invert == 1. This patch adds all required changes to sdhci-s3c driver. Signed-off-by:
-
Marek Szyprowski authored
This patch enables SDHCI_QUIRK_NO_HISPD_BIT on Samsung SDHCI driver. This solves detection problems with some external SD cards. This change has been tested on S5PC100 and S5PC110. It has no inpact on driver speed. Signed-off-by:
-
Marek Szyprowski authored
S3C SDHCI host controller can change the source for generating mmc clock. By default host bus clock is used, what causes some problems on machines with 133MHz bus, because the SDHCI divider cannot be as high get proper clock value for identification mode. This is not a problem for the controller, because it can generate lower frequencies from other clock sources. This patch changes sdhci driver to use get_min_clock() call if it has been provided. This fixes the flood of the following warnings on Samsung S5PV210 SoCs: mmc0: Minimum clock frequency too high for identification mode Signed-off-by:
-
Hyuk Lee authored
On Samsung's SDMMC hosts the timeout clock is derivied from the SD Clock which is set dynamically. So checked SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK quirk and removed 'sdhci_s3c_get_timeout_clk' callback which doesn't need any more. Signed-off-by:
Hyuk Lee <hyuk1.lee@samsung.com> Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
-
Venkatraman S authored
If other informative interrupts are enabled for the DMA channel used by hsmmc, those are incorrectly treated as block completion. This patch lets only the block completion interrupt to be processed. Signed-off-by:
Venkatraman S <svenkatr@ti.com> Acked-by:
Madhusudhan Chikkature <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
-
Christian Dietrich authored
CONFIG_MMC_MSM7X00A_RESUME_IN_WQ and CONFIG_MMC_EMBEDDED_SDIO don't exist in Kconfig and is never defined anywhere else, therefore removing all references for it from the source code. Signed-off-by:
Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Acked-by:
David Brown <davidb@codeaurora.org> Cc: Daniel Walker <dwalker@codeaurora.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
-
Grazvydas Ignotas authored
Pandora has TI WL1251 attached on MMC3, which is non-standard SDIO chip. Make use MMC_QUIRK_NONSTD_SDIO to tell SDIO core about it. Signed-off-by:
Grazvydas Ignotas <notasas@gmail.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Bob Copeland <me@bobcopeland.com> Cc: Kalle Valo <kvalo@adurom.com> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Kishore Kadiyala <kishore.kadiyala@ti.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
-
Grazvydas Ignotas authored
This will allow us to set up special cards in machine drivers just after they are detected by MMC core. Signed-off-by:
-
Grazvydas Ignotas authored
There are some chips (like TI WL12xx series) that can be interfaced over SDIO but don't support the SDIO specification, meaning that they are missing CIA (Common I/O Area) with all it's registers. Current Linux SDIO implementation relies on those registers to identify and configure the card, so non-standard cards can not function and cause lots of warnings from the core when it reads invalid data from non-existent registers. After this patch, init_card() host callback can now set new quirk MMC_QUIRK_NONSTD_SDIO, which means that SDIO core should not try to access any standard SDIO registers and rely on init_card() to fill all SDIO structures instead. As those cards are usually embedded chips, all the required information can be obtained from machine board files by the host driver when it's called through init_card() callback. Signed-off-by:
-
Anton Vorontsov authored
There's nothing special, just SoC-specific ops and quirks. Signed-off-by:
Anton Vorontsov <avorontsov@mvista.com> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Richard R?jfors <richard.rojfors@pelagicore.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
-
Anton Vorontsov authored
Due to build system limitations, intermediate and final objects can't have the same names. And as we're going to start building SoC-specific objects, let's rename the module to sdhci-platform, into which we'll link sdhci-pltfm and SoC-specifc objects. There should be no issue in renaming as the driver uses modalias mechanism. This is exactly the same approach as in sdhci-of driver. Signed-off-by:
-
Anton Vorontsov authored
Sometimes want to place SoC-specific parts alongside with the generic driver, and to do so, we have to switch the driver over to the module device table matching. Note that drivers/mmc/host/sdhci-pltfm.h is so far empty, but it'll hold SoC-specific driver data handlers soon. Signed-off-by:
-
Kishore Kadiyala authored
This patch improves low speeds for SD cards. OMAP-MMC controller's can support maximum bus width of '8'. when bus width is mentioned as "8" in controller data,the SD stack will check whether bus width is "4" and if not it will set bus width to "1" and there by degrading performance. This patch fixes the issue and improves the performance of SD cards. Signed-off-by:
Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by:
Nishanth Menon <nm@ti.com> Acked-by:
Jarkko Nikula <jhnikula@gmail.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Matt Fleming <matt@console-pimps.org> Cc: Tony Lindgren <tony@atomide.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
-
Hanumath Prasad authored
A non-zero value of SEC_COUNT does not indicate that the card is sector addressed. According to the MMC specification, cards with a density greater than 2GiB are sector addressed. Acked-by:
Linus Walleij <linus.walleij@stericsson.com> Signed-off-by:
Hanumath Prasad <hanumath.prasad@stericsson.com> Signed-off-by:
Rabin Vincent <rabin.vincent@stericsson.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
-
Kyungmin Park authored
Some host controllers can set mmc->caps before sdhci_add_host(). Signed-off-by:
-
Kyungmin Park authored
Some host controllers such as s5pc110 support the WIDE8 feature. Signed-off-by:
-
Kyungmin Park authored
When using QUIRK_NONSTANDARD_CLOCK, it checks the set_clock() function which is not used actually. So delete it. Signed-off-by:
-
Maxim Levitsky authored
The current way of disabling it is not well tested by vendor and has all kinds of bugs that show up on resume from ram/disk. A very good example is a dead SDHCI controller. Old way of disabling is still supported by continuing to use CONFIG_MMC_RICOH_MMC. Based on 'http://list.drzeus.cx/pipermail/sdhci-devel/2007-December/002085.html' Therefore most of the credit for this goes to Andrew de Quincey Signed-off-by:
Maxim Levitsky <maximlevitsky@gmail.com> Cc: Andrew de Quincey <adq_dvb@lidskialf.net> Acked-by:
Philip Langdale <philipl@overt.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
-
Maxim Levitsky authored
If you don't use CONFIG_MMC_UNSAFE_RESUME, as soon as you attempt to suspend, the card will be removed, therefore this patch doesn't change the behavior of this option. However the removal will be done by pm notifier, which runs while userspace is still not frozen and thus can freely use del_gendisk, without the risk of deadlock which would happen otherwise. Card detect workqueue is now disabled while userspace is frozen, Therefore if you do use CONFIG_MMC_UNSAFE_RESUME, and remove the card during suspend, the removal will be detected as soon as userspace is unfrozen, again at the moment it is safe to call del_gendisk. Tested with and without CONFIG_MMC_UNSAFE_RESUME with suspend and hibernate. [akpm@linux-foundation.org: clean up function prototype] [akpm@linux-foundation.org: fix CONFIG_PM-n linkage, small cleanups] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Michal Miroslaw authored
Signed-off-by:
Michal Miroslaw <mirq-linux@rere.qmqm.pl> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Chris Ball <cjb@laptop.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by:
-
Michal Miroslaw authored
This series adds support for SD combo cards to MMC/SD driver stack. SD combo consists of SD memory and SDIO parts in one package. Since the parts have a separate SD command sets, after initialization, they can be treated as independent cards on one bus. Changes are divided into two patches. First is just moving initialization code around so that SD memory part init can be called from SDIO init. Second patch is a proper change enabling SD memory along SDIO. I tried to move as much no-op changes to the first patch so that it's easier to follow the required changes to initialization flow for SDIO cards. This is based on Simplified SDIO spec v.2.00. The init sequence is slightly modified to follow current SD memory init implementation. Command sequences, assuming SD memory and SDIO indeed ignore unknown commands, are the same as before for both parts. This patch: Prepare for SD-combo (IO+mem) support by splitting SD memory card init and related functions. Signed-off-by:
-
Kyungmin Park authored
The eMMC spec 4.4 and 4.3 + additional feature chips has CSD structure version 3 and version 3 have to check the CSD_STRUCTURE byte in the EXT_CSD register. Also fix EXT_CSD revision message. [akpm@linux-foundation.org: fix comment, per Chris Ball] Signed-off-by:
-
Changli Gao authored
Use kmalloc() to allocate fdmem if possible. vmalloc() is used as a fallback solution for fdmem allocation. A new helper function __free_fdtable() is introduced to reduce the lines of code. A potential bug, vfree() a memory allocated by kmalloc(), is fixed. [akpm@linux-foundation.org: use __GFP_NOWARN, uninline alloc_fdmem() and free_fdmem()] Signed-off-by:
Changli Gao <xiaosuo@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jiri Slaby <jslaby@suse.cz> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Avi Kivity <avi@redhat.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
-
Dmitry Torokhov authored
Signed-off-by:
Dmitry Torokhov <dtor@mail.ru> Acked-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
John Kacur <jkacur@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Wu Fengguang authored
The O_* bit numbers are defined in 20+ arch/*, and can silently overlap. Add a compile time check to ensure the uniqueness as suggested by David Miller. Signed-off-by:
Wu Fengguang <fengguang.wu@intel.com> Cc: David Miller <davem@davemloft.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Eric Paris <eparis@redhat.com> Cc: Roland Dreier <rdreier@cisco.com> Cc: Jamie Lokier <jamie@shareable.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by:
-
Tony Battersby authored
Improve the description of fget_light(), which is currently incorrect about needing a prior refcnt (judging by the way it is actually used). Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Randy Dunlap authored
Add <linux/types.h> to <linux/virtio_9p.h> so that types are explicitly defined: linux/virtio_9p.h:15: found __[us]{8,16,32,64} type without #include <linux/types.h> Signed-off-by:Randy Dunlap <randy.dunlap@oracle.com> Cc: Eric Van Hensbergen <ericvh@gmail.com> Signed-off-by:
-
Andy Shevchenko authored
Signed-off-by:
Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Cc: Adaptec OEM Raid Solutions <aacraid@adaptec.com> Cc: "James E.J. Bottomley" <James.Bottomley@suse.de> Cc: James Smart <james.smart@emulex.com> Signed-off-by:
-
Julia Lawall authored
Use memdup_user when user data is immediately copied into the allocated region. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; position p; identifier l1,l2; @@ - to = \(kmalloc@p\|kzalloc@p\)(size,flag); + to = memdup_user(from,size); if ( - to==NULL + IS_ERR(to) || ...) { <+... when != goto l1; - -ENOMEM + PTR_ERR(to) ...+> } - if (copy_from_user(to, from, size) != 0) { - <+... when != goto l2; - -EFAULT - ...+> - } // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Cc: Doug Gilbert <dgilbert@interlog.com> Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Andrew Morton authored
A couple of scsi drivers define a BIT() macro, duplicating the one in bitops.h. Cc: Jing Huang <huangj@brocade.com> Cc: Robert Love <robert.w.love@intel.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Randy Dunlap authored
bnx2i should depend on NET since it selects SCSI_ISCSI_ATTRS, which depends on NET. Also move the dependencies together. The "depends" change fixes multiple build errors when CONFIG_NET is not enabled: ERROR: "skb_trim" [drivers/scsi/scsi_transport_iscsi.ko] undefined! ERROR: "netlink_kernel_create" [drivers/scsi/scsi_transport_iscsi.ko] undefined! ERROR: "netlink_kernel_release" [drivers/scsi/scsi_transport_iscsi.ko] undefined! ERROR: "skb_pull" [drivers/scsi/scsi_transport_iscsi.ko] undefined! ERROR: "init_net" [drivers/scsi/scsi_transport_iscsi.ko] undefined! ERROR: "__alloc_skb" [drivers/scsi/scsi_transport_iscsi.ko] undefined! ERROR: "netlink_broadcast" [drivers/scsi/scsi_transport_iscsi.ko] undefined! ERROR: "kfree_skb" [drivers/scsi/scsi_transport_iscsi.ko] undefined! ERROR: "skb_put" [drivers/scsi/scsi_transport_iscsi.ko] undefined! Signed-off-by:
-
Randy Dunlap authored
pmcraid should depend on NET since it uses netlink interfaces. This fixes multiple build errors when CONFIG_NET is not enabled: ERROR: "genl_register_family" [drivers/scsi/pmcraid.ko] undefined! ERROR: "genl_unregister_family" [drivers/scsi/pmcraid.ko] undefined! ERROR: "nla_put" [drivers/scsi/pmcraid.ko] undefined! ERROR: "init_net" [drivers/scsi/pmcraid.ko] undefined! ERROR: "__alloc_skb" [drivers/scsi/pmcraid.ko] undefined! ERROR: "netlink_broadcast" [drivers/scsi/pmcraid.ko] undefined! ERROR: "kfree_skb" [drivers/scsi/pmcraid.ko] undefined! ERROR: "skb_put" [drivers/scsi/pmcraid.ko] undefined! Signed-off-by:
-
Peter Korsgaard authored
Commit 9e4f5e29 ("FC Pass Thru support") exported a number of header files in include/scsi to user space, but didn't change the uX types to the userspace-compatible __uX types. Without that you'll get compile errors when including them - E.G.: include/scsi/scsi.h:145: error: expected specifier-qualifier-list before `u8' Signed-off-by:
Peter Korsgaard <jacmet@sunsite.dk> Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: James Smart <james.smart@emulex.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Roel Kluin authored
It appears that the wrong fcport H2I message was tested Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Acked-by:
Jing Huang <huangj@Brocade.COM> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Joe Perches authored
It's an exported symbol of kernel/printk.c Rename vprintk and dprintk macros to more common VPRINTK and DPRINTK Add do { } while(0) around macros Add level to VPRINTK so KERN_CONT can be used a couple of times. Signed-off-by:Joe Perches <joe@perches.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by:
-
Yong Zhang authored
Use DECLARE_WAIT_QUEUE_HEAD_ONSTACK to make lockdep happy Signed-off-by:
Yong Zhang <yong.zhang0@gmail.com> Cc: Jing Huang <huangj@brocade.com> Cc: James E.J. Bottomley <James.Bottomley@suse.de> Cc: Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Joe Perches authored
String constants that are continued on subsequent lines with \ will cause spurious whitespace in the resulting output. Signed-off-by:
-
