- 01 Oct, 2019 37 commits
-
-
Ezequiel Garcia authored
It seems all codecs are using a 16x16 size macroblock, and so it's possible to have just one set of macroblock macros. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Hans Verkuil authored
"struct struct" -> "struct" Signed-off-by:
-
Jernej Skrabec authored
Currently, if start streaming -> stop streaming -> start streaming sequence is executed, driver will end job prematurely, if ctx->translen is higher than 1, because "aborting" flag is still set from previous stop streaming command. Fix that by clearing "aborting" flag in start streaming handler. Fixes: 96d8eab5 ("V4L/DVB: [v5,2/2] v4l: Add a mem-to-mem videobuf framework test device") Signed-off-by:
Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by:
-
Vandana BN authored
When vbi stream is started, followed by video streaming, the vid_cap_streaming and vid_out_streaming were not being set to true, which would cause the video stream to stop when vbi stream is stopped. This patch allows to set vid_cap_streaming and vid_out_streaming to true. According to Hans Verkuil it appears that these 'if (dev->kthread_vid_cap)' checks are a left-over from the original vivid development and should never have been there. Signed-off-by:
Vandana BN <bnvandana@gmail.com> Cc: <stable@vger.kernel.org> # for v3.18 and up Signed-off-by:
-
Hans Verkuil authored
It should be "%u.%02u" instead of "%u.%u". Signed-off-by:
Bard Winther <bwinther@cisco.com> Signed-off-by:
-
Kefeng Wang authored
If v4l2_m2m_init() fails, m2m_dev pointer will be set ERR_PTR(-ENOMEM), then kfree m2m_dev will trigger BUG_ON, see below, fix it by setting m2m_dev to NULL. vim2m vim2m.0: Failed to init mem2mem device ------------[ cut here ]------------ kernel BUG at mm/slub.c:3944! invalid opcode: 0000 [#1] SMP PTI CPU: 11 PID: 9061 Comm: insmod Tainted: G E 5.2.0-rc2 #81 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:kfree+0x11a/0x160 Call Trace: vim2m_device_release+0x3f/0x50 [vim2m] device_release+0x27/0x80 kobject_release+0x68/0x190 vim2m_probe+0x20f/0x280 [vim2m] platform_drv_probe+0x37/0x90 really_probe+0xef/0x3d0 driver_probe_device+0x110/0x120 device_driver_attach+0x4f/0x60 __driver_attach+0x9a/0x140 ? device_driver_attach+0x60/0x60 bus_for_each_dev+0x76/0xc0 ? klist_add_tail+0x57/0x70 bus_add_driver+0x141/0x210 driver_register+0x5b/0xe0 vim2m_init+0x29/0x1000 [vim2m] do_one_initcall+0x46/0x1f4 ? __slab_alloc+0x1c/0x30 ? kmem_cache_alloc_trace+0x167/0x1b0 do_init_module+0x5b/0x21f load_module+0x1add/0x1fb0 ? __do_sys_finit_module+0xe9/0x110 __do_sys_finit_module+0xe9/0x110 do_syscall_64+0x5b/0x1c0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: ea6c7e34 ("media: vim2m: replace devm_kzalloc by kzalloc") Reported-by:
Hulk Robot <hulkci@huawei.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by:
-
Alexandre Courbot authored
Check for a potentially NULL pointer that was overlooked and use shorter accessors to the same data. While we are at it, sprinkle a few comments. Signed-off-by:
Alexandre Courbot <acourbot@chromium.org> Signed-off-by:
-
Alexandre Courbot authored
Each of the supported decoder formats used to set the same RPC interrupt handler by themselves, even though this could be done by the IF init function itself. Move it to the right place and stop making its symbol public. Signed-off-by:
-
Yunfei Dong authored
mtk_q_data::fmt is actually a pointer and must be dereferenced as such. This went under the radar because mtk_v4l2_debug() evaluates to nothing unless DEBUG is defined. [acourbot: split into its own commit] Signed-off-by:
Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the arrays on the stack but instead make them static const. Makes the object code smaller by 767 bytes. Before: text data bss dec hex filename 41567 15088 192 56847 de0f em28xx/em28xx-dvb.o After: text data bss dec hex filename 39872 16016 192 56080 db10 em28xx/em28xx-dvb.o (gcc version 9.2.1, amd64) Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the array 'registers' on the stack but instead make it static const. Makes the object code smaller by 45 bytes. Before: text data bss dec hex filename 17364 5000 0 22364 575c platform/s3c-camif/camif-regs.o After: text data bss dec hex filename 17255 5064 0 22319 572f platform/s3c-camif/camif-regs.o (gcc version 9.2.1, amd64) Signed-off-by:
-
Philipp Zabel authored
Since dec_ref_pic_marking_bit_size is not a syntax element itself, explicitly state that this is the size in bits of the dec_ref_pic_marking() syntax element contained in the slice. Signed-off-by:
-
Philipp Zabel authored
This adds a label to the error path to avoid calling v4l2_m2m_ctx_init() and kfree(ctx) in two places each. Signed-off-by:
-
Hans Verkuil authored
to synchronises -> to synchronise Signed-off-by:
-
Christophe JAILLET authored
At the beginning of the probe function, we have a call to 'request_muxed_region(BRA_SMB_BASE_ADDR, 7, "CEC00001")()' A corresponding 'release_region()' is performed in the remove function but is lacking in the error handling path. Add it. Fixes: b03c2fb9 ("media: add SECO cec driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Hans Verkuil authored
Initialize the context on open() with valid capture and output formats. It is good practice to always have valid formats internally. This solves one vb2 warning in the kernel log where the sizeimage value of the output format was 0 when requesting buffers, which is not allowed. It also simplifies the g_fmt ioctl implementations since they no longer have to check if a valid format was ever set. cedrus_prepare_format() now also validates sizeimage for the output formats, ensuring userspace can't set it to 0 since that would cause the same vb2 warning. Finally remove the sizeimage == 0 check in cedrus_try_fmt_vid_out() since cedrus_prepare_format() will now adjust this value. Signed-off-by:
-
Hans Verkuil authored
If an unsupported pixelformat is passed to try_fmt, then pick the first valid pixelformat instead. This is more standard V4L2 behavior. Signed-off-by:
-
Hans Verkuil authored
Fixes this compliance warning: $ v4l2-compliance -m0 v4l2-compliance SHA: b514d615166bdc0901a4c71261b87db31e89f464, 32 bits Compliance test for cedrus device /dev/media0: Media Driver Info: Driver name : cedrus Model : cedrus Serial : Bus info : Media version : 5.3.0 Hardware revision: 0x00000000 (0) Driver version : 5.3.0 Required ioctls: warn: v4l2-test-media.cpp(51): empty bus_info test MEDIA_IOC_DEVICE_INFO: OK Signed-off-by: -
Benoit Parrot authored
Switch to SPDX licensing and drop the redundant GPL text. Signed-off-by:
Benoit Parrot <bparrot@ti.com> Acked-by:
Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
-
Benoit Parrot authored
The bus related static data included in the vpfe_fmt static table can be derived dynamically instead. This simplify the table and it's use. We instead replace the per bus data info with just the usual bit per pixel value for each supported pixel format. Signed-off-by:
-
Benoit Parrot authored
The try_fmt was not actually trying out the provided format but merely returning the current format basically like get_fmt. In addition set_fmt should first invoked try_fmt to validate the given format before applying it to the hardware. To fix all of these the whole get/try/set ioctl functions had to be reworked. When calculating the bytesperline/stride and sizeimage format member we don't need to locally store the current value of bytesperpixel as it can easily get derived dynamically. Signed-off-by:
-
Benoit Parrot authored
checkpatch.pl nows reports several: WARNING: Prefer using '"%s...", __func__' to using '<function name>', this function's name, in a string. So fix these for the whole driver. At the same time remove the function entry trace log as those can be enabled using ftrace instead. Signed-off-by:
-
Benoit Parrot authored
Using a statically defined format array would cause issue when multiple vpfe instance would be connected to sub-device of different capabilities. We need to use an instance based array instead to properly maintain a per port/instance format list. Signed-off-by:
-
Benoit Parrot authored
VIDIOC_S_STD should not return an error if the value is identical to the current one. This error was highlighted by the v4l2-compliance test. Signed-off-by:
-
Benoit Parrot authored
Returning queued vb2 buffers back to user space is a common task best handled by a helper function. Signed-off-by:
-
Benoit Parrot authored
When start_streaming fails the h/w module might be left enabled inadvertently. Make sure it is disabled in the error path. Signed-off-by:
-
Benoit Parrot authored
We were originally attempting to stop all processing as soon as possible, but the in-progress DMA operation cannot be canceled. This led to the module being in a busy state and prevented proper power management functionality. The existing implementation would attempt to clean things up by waiting up to 50ms. However when receiving video frame at 15fps or lower, it meant an inter frame arrival rate of 66.6 ms or higher. In such cases upon tear down the following message could be seen: omap_hwmod: vpfe0: _wait_target_disable failed This patch fixes this issue by adding a stopping state where we would wait for the next Vsync before disabling the hardware. Signed-off-by:
-
Benoit Parrot authored
Make the ISR code simpler to follow by removing goto and relocating/eliminating duplicate spinlock accesses. Signed-off-by:
-
Benoit Parrot authored
Previous generation of this driver were hard coded to handle encoder/decoder where the first line never contains any data and was therefore always skipped, however when dealing with actual camera sensors the first line is always present. Signed-off-by:
Jyri Sarha <jsarha@ti.com> Acked-by:
-
Dave Gerlach authored
Currently if vpfe is not active then it returns immediately in the suspend and resume handlers. Change this so that it always performs the pinctrl config so that we can still get proper sleep state configuration on the pins even if we do not need to worry about fully saving and restoring context. Signed-off-by:
Dave Gerlach <d-gerlach@ti.com> Signed-off-by:
-
Shuah Khan authored
After practically re-writing the driver to collpase it into a monolith, I am adding myself as a reviewer for vimc driver. Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org> Acked-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
-
Shuah Khan authored
vimc driver is now a monolithic driver. Update the module parameter usage information to reflect that. [m.chehab+samsung@kernel.org: fix two warnings due to wrontly added spaces] Signed-off-by:
-
Shuah Khan authored
Move duplicated IS_SRC and IS_SINK dfines to common header. Rename them to VIMC_IS_SRC and VIM_IS_SINK. Signed-off-by:
-
Shuah Khan authored
If vimc module is removed while streaming is in progress, sensor subdev unregister runs into general protection fault when it tries to unregister media entities. This is a common subdev problem related to releasing pads from v4l2_device_unregister_subdev() before calling unregister. Unregister references pads during unregistering subdev. The sd release handler is the right place for releasing all sd resources including pads. The release handlers currently release all resources except the pads. Fix v4l2_device_unregister_subdev() not release pads and release pads from the sd_int_op release handlers. kernel: [ 4136.715839] general protection fault: 0000 [#1] SMP PTI kernel: [ 4136.715847] CPU: 2 PID: 1972 Comm: bash Not tainted 5.3.0-rc2+ #4 kernel: [ 4136.715850] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013 kernel: [ 4136.715858] RIP: 0010:media_gobj_destroy.part.16+0x1f/0x60 kernel: [ 4136.715863] Code: ff 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 fe 48 89 e5 53 48 89 fb 48 c7 c7 00 7f cf b0 e8 24 fa ff ff 48 8b 03 <48> 83 80 a0 00 00 00 01 48 8b 43 18 48 8b 53 10 48 89 42 08 48 89 kernel: [ 4136.715866] RSP: 0018:ffff9b2248fe3cb0 EFLAGS: 00010246 kernel: [ 4136.715870] RAX: bcf2bfbfa0d63c2f RBX: ffff88c3eb37e9c0 RCX: 00000000802a0018 kernel: [ 4136.715873] RDX: ffff88c3e4f6a078 RSI: ffff88c3eb37e9c0 RDI: ffffffffb0cf7f00 kernel: [ 4136.715876] RBP: ffff9b2248fe3cb8 R08: 0000000001000002 R09: ffffffffb0492b00 kernel: [ 4136.715879] R10: ffff9b2248fe3c28 R11: 0000000000000001 R12: 0000000000000038 kernel: [ 4136.715881] R13: ffffffffc09a1628 R14: ffff88c3e4f6a028 R15: fffffffffffffff2 kernel: [ 4136.715885] FS: 00007f8389647740(0000) GS:ffff88c465500000(0000) knlGS:0000000000000000 kernel: [ 4136.715888] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: [ 4136.715891] CR2: 000055d008f80fd8 CR3: 00000001996ec005 CR4: 00000000000606e0 kernel: [ 4136.715894] Call Trace: kernel: [ 4136.715903] media_gobj_destroy+0x14/0x20 kernel: [ 4136.715908] __media_device_unregister_entity+0xb3/0xe0 kernel: [ 4136.715915] media_device_unregister_entity+0x30/0x40 kernel: [ 4136.715920] v4l2_device_unregister_subdev+0xa8/0xe0 kernel: [ 4136.715928] vimc_ent_sd_unregister+0x1e/0x30 [vimc] kernel: [ 4136.715933] vimc_sen_rm+0x16/0x20 [vimc] kernel: [ 4136.715938] vimc_remove+0x3e/0xa0 [vimc] kernel: [ 4136.715945] platform_drv_remove+0x25/0x50 kernel: [ 4136.715951] device_release_driver_internal+0xe0/0x1b0 kernel: [ 4136.715956] device_driver_detach+0x14/0x20 kernel: [ 4136.715960] unbind_store+0xd1/0x130 kernel: [ 4136.715965] drv_attr_store+0x27/0x40 kernel: [ 4136.715971] sysfs_kf_write+0x48/0x60 kernel: [ 4136.715976] kernfs_fop_write+0x128/0x1b0 kernel: [ 4136.715982] __vfs_write+0x1b/0x40 kernel: [ 4136.715987] vfs_write+0xc3/0x1d0 kernel: [ 4136.715993] ksys_write+0xaa/0xe0 kernel: [ 4136.715999] __x64_sys_write+0x1a/0x20 kernel: [ 4136.716005] do_syscall_64+0x5a/0x130 kernel: [ 4136.716010] entry_SYSCALL_64_after_hwframe+0x4 Signed-off-by:
-
Shuah Khan authored
vimc uses Component API to split the driver into functional components. The real hardware resembles a monolith structure than component and component structure added a level of complexity making it hard to maintain without adding any real benefit. The sensor is one vimc component that would makes sense to be a separate module to closely align with the real hardware. It would be easier to collapse vimc into single monolithic driver first and then split the sensor off as a separate module. Collapse it into a single monolithic driver removing the Component API. This patch removes the component API and makes minimal changes to the code base preserving the functional division of the code structure. Preserving the functional structure allows us to split the sensor off as a separate module in the future. Major design elements in this change are: - Use existing struct vimc_ent_config and struct vimc_pipeline_config to drive the initialization of the functional components. - Make vimc_device and vimc_ent_config global by moving them to vimc-common.h - Add two new hooks add and rm to initialize and register, unregister and free subdevs. - All component API is now gone and bind and unbind hooks are modified to do "add" and "rm" with minimal changes to just add and rm subdevs. - vimc-core's bind and unbind are now register and unregister. - Add a new field to vimc_device structure for saving the pointers to struct vimc_ent_device(s) subdevs create in their "add" hooks. These get used to create links and removing the subdevs. vimc-core allocates this array which sized to number of entries in the topology defined in the vimc_pipeline_config structure. - vimc-core invokes "add" hooks from its vimc_register_devices(). The "add" hooks remain the same and register subdevs. They don't create platform devices of their own and use vimc's pdev.dev as their reference device. Each "add" hook returns pointer to its struct vimc_ent_device. This is saved in the vimc_device ent_devs array. - vimc-core invokes "rm" hooks from its unregister to unregister subdevs and cleanup. - vimc-core invokes "add" and "rm" hooks with pointer to struct vimc_device and the corresponding vimc_ent_device saved in the ent_devs. The following configure and stream test works on all devices. media-ctl -d platform:vimc -V '"Sensor A":0[fmt:SBGGR8_1X8/640x480]' media-ctl -d platform:vimc -V '"Debayer A":0[fmt:SBGGR8_1X8/640x480]' media-ctl -d platform:vimc -V '"Sensor B":0[fmt:SBGGR8_1X8/640x480]' media-ctl -d platform:vimc -V '"Debayer B":0[fmt:SBGGR8_1X8/640x480]' v4l2-ctl -z platform:vimc -d "RGB/YUV Capture" -v width=1920,height=1440 v4l2-ctl -z platform:vimc -d "Raw Capture 0" -v pixelformat=BA81 v4l2-ctl -z platform:vimc -d "Raw Capture 1" -v pixelformat=BA81 v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video1 v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video2 v4l2-ctl --stream-mmap --stream-count=100 -d /dev/video3 Signed-off-by:
-
zhengbin authored
In media_device_register_entity, if media_graph_walk_init fails, need to free the previously memory. Reported-by:
zhengbin <zhengbin13@huawei.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the array init_regs on the stack but instead make it static. Makes the object code smaller by 57 bytes. Before: text data bss dec hex filename 15935 3600 128 19663 4ccf drivers/media/i2c/mt9m001.o After: text data bss dec hex filename 15782 3696 128 19606 4c96 drivers/media/i2c/mt9m001.o (gcc version 9.2.1, amd64) Signed-off-by:
-
- 30 Sep, 2019 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: "A bunch of fixes that accumulated in recent weeks, mostly material for stable. Summary: - fix for regression from 5.3 that prevents to use balance convert with single profile - qgroup fixes: rescan race, accounting leak with multiple writers, potential leak after io failure recovery - fix for use after free in relocation (reported by KASAN) - other error handling fixups" * tag 'for-5.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: qgroup: Fix reserved data space leak if we have multiple reserve calls btrfs: qgroup: Fix the wrong target io_tree when freeing reserved data space btrfs: Fix a regression which we can't convert to SINGLE profile btrfs: relocation: fix use-after-free on dead relocation roots Btrfs: fix race setting up and completing qgroup rescan workers Btrfs: fix missing error return if writeback for extent buffer never started btrfs: adjust dirty_metadata_bytes after writeback failure of extent buffer Btrfs: fix selftests failure due to uninitialized i_mode in test inodes -
git://github.com/c-sky/csky-linuxLinus Torvalds authored
Pull csky updates from Guo Ren: "This round of csky subsystem just some fixups: - Fix mb() synchronization problem - Fix dma_alloc_coherent with PAGE_SO attribute - Fix cache_op failed when cross memory ZONEs - Optimize arch_sync_dma_for_cpu/device with dma_inv_range - Fix ioremap function losing - Fix arch_get_unmapped_area() implementation - Fix defer cache flush for 610 - Support kernel non-aligned access - Fix 610 vipt cache flush mechanism - Fix add zero_fp fixup perf backtrace panic - Move static keyword to the front of declaration - Fix csky_pmu.max_period assignment - Use generic free_initrd_mem() - entry: Remove unneeded need_resched() loop" * tag 'csky-for-linus-5.4-rc1' of git://github.com/c-sky/csky-linux: csky: Move static keyword to the front of declaration csky: entry: Remove unneeded need_resched() loop csky: Fixup csky_pmu.max_period assignment csky: Fixup add zero_fp fixup perf backtrace panic csky: Use generic free_initrd_mem() csky: Fixup 610 vipt cache flush mechanism csky: Support kernel non-aligned access csky: Fixup defer cache flush for 610 csky: Fixup arch_get_unmapped_area() implementation csky: Fixup ioremap function losing csky: Optimize arch_sync_dma_for_cpu/device with dma_inv_range csky/dma: Fixup cache_op failed when cross memory ZONEs csky: Fixup dma_alloc_coherent with PAGE_SO attribute csky: Fixup mb() synchronization problem
-
