After a struct sbitmap_queue is resized smaller, the allocation hints
may still be set to bits beyond the new depth of the bitmap. This means
that, for example, if the number of blk-mq tags is reduced through
sysfs, more requests than the nominal queue depth may be in flight.

It's tempting to fix this at resize time by doing a one-time
reinitialization of the hints, but this can race with
__sbitmap_queue_get() updating the hint. Instead, check the hint before
we use it. This caused no measurable performance difference in my
synthetic benchmarks.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

In order to get good cache behavior from a sbitmap, we want each CPU to
stick to its own cacheline(s) as much as possible. This might happen
naturally as the bitmap gets filled up and the alloc_hint values spread
out, but we really want this behavior from the start. blk-mq apparently
intended to do this, but the code to do this was never wired up. Get rid
of the dead code and make it part of the sbitmap library.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Again, there's no point in passing this in every time. Make it part of
struct sbitmap_queue and clean up the API.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Allocating your own per-cpu allocation hint separately makes for an
awkward API. Instead, allocate the per-cpu hint as part of the struct
sbitmap_queue. There's no point for a struct sbitmap_queue without the
cache, but you can still use a bare struct sbitmap.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

The original bt_alloc() we converted from was using kzalloc(), not
kzalloc_node(), to allocate the wait queues. This was probably an
oversight, so fix it for sbitmap_queue_init_node().
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

This is a generally useful data structure, so make it available to
anyone else who might want to use it. It's also a nice cleanup
separating the allocation logic from the rest of the tag handling logic.

The code is behind a new Kconfig option, CONFIG_SBITMAP, which is only
selected by CONFIG_BLOCK for now.

This should be a complete noop functionality-wise.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

We currently account a '0' dispatch, and anything above that still falls
below the range set by BLK_MQ_MAX_DISPATCH_ORDER. If we dispatch more,
we don't account it.

Change the last bucket to be inclusive of anything above the range we
track, and have the sysfs file reflect that by including a '+' in the
output:

$ cat /sys/block/nvme0n1/mq/0/dispatched
        0	1006
        1	20229
        2	1
        4	0
        8	0
       16	0
       32+	0
Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>

blk_mq_delay_kick_requeue_list() provides the ability to kick the
q->requeue_list after a specified time.  To do this the request_queue's
'requeue_work' member was changed to a delayed_work.

blk_mq_delay_kick_requeue_list() allows DM to defer processing requeued
requests while it doesn't make sense to immediately requeue them
(e.g. when all paths in a DM multipath have failed).
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Since REQ_OP_BITS == 3 and __REQ_NR_BITS == 30 it is not that hard
to pass an op_flags argument to bio_set_op_attrs() that is larger
than the number of bits reserved for the op_flags argument. Complain
if this happens. Additionally, ensure that negative arguments trigger
a complaint (1 << ... is signed while 1U << ... is unsigned; adding
0U to an integer expression causes it to be promoted to an unsigned
type).
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@hgst.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

Introduce the bio_flags() macro. Ensure that the second argument of
bio_set_op_attrs() only contains flags and no operation. This patch
does not change any functionality.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Chris Mason <clm@fb.com> (maintainer:BTRFS FILE SYSTEM)
Cc: Josef Bacik <jbacik@fb.com> (maintainer:BTRFS FILE SYSTEM)
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@hgst.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

Make it clear that the sizeof(unsigned int) expression in BIO_OP_SHIFT
refers to the bi_opf member of struct bio.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Damien Le Moal <damien.lemoal@hgst.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

commit e1defc4f
"block: Do away with the notion of hardsect_size"
removed the notion of "hardware sector size" from
the kernel in favor of logical block size, but
references remain in comments and documentation.

Update the remaining sites mentioning hardsect.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

The blk_mq_alloc_single_hw_queue() is a prototype artifact that
should have been removed with
commit cdef54dd
"blk-mq: remove alloc_hctx and free_hctx methods" where the last
users of it were deleted.

Fixes: cdef54dd ("blk-mq: remove alloc_hctx and free_hctx methods")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

DAX support for block devices was removed in commits 03cdad
("block: disable block device DAX by default") and 99a01cdf
("block: remove BLK_DEV_DAX config option"), but we still kept a call to
dax_do_io and some uneeded i_flags manipulations introduced in commit
bbab37 ("block: Add support for DAX reads/writes to block devices").

Remove those leftovers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

Allow the io_poll statistics to be zeroed to make for easier logging
of polling event.
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

In order to help determine the effectiveness of polling in a running
system it is usful to determine the ratio of how often the poll
function is called vs how often the completion is checked. For this
reason we add a poll_considered variable and add it to the sysfs entry
for io_poll.
Signed-off-by: Stephen Bates <sbates@raithlin.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>

Instead of rolling our own timer, just utilize the blk mq req timeout and do the
disconnect if any of our commands timeout.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

In preparation for some future changes, change a few of the state bools over to
normal bits to set/clear properly.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

We hit a warning when shutting down the nbd connection because we have irq's
disabled.  We don't really need to do the shutdown under the lock, just clear
the nbd->sock.  So do the shutdown outside of the irq.  This gets rid of the
warning.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

This moves NBD over to using blkmq, which allows us to get rid of the NBD
wide queue lock and the async submit kthread.  We will start with 1 hw
queue for now, but I plan to add multiple tcp connection support in the
future and we'll fix how we set the hwqueue's.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>

We get 1 warning when biuld kernel with W=1:
drivers/block/mtip32xx/mtip32xx.c:3689:6: warning: no previous prototype for
 'mtip_block_release' [-Wmissing-prototypes]

In fact, this function is only used in the file in which it is declared
and don't need a declaration, but can be made static.
so this patch marks it 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Jens Axboe <axboe@fb.com>

When drivers or the core calls this function, they usually
dereference the request shortly there after. Prefetch the first
cache line.

Profiling IO workloads shows that this is the most common cache
miss on the block side of things.
Signed-off-by: Jens Axboe <axboe@fb.com>

Various cache line optimizations:

- Move delay_work towards the end. It's huge, and we don't use it
  a lot (only SCSI).

- Move the atomic state into the same cacheline as the the dispatch
  list and lock.

- Rearrange a few members to pack it better.

- Shrink the max-order for dispatch accounting from 10 to 7. This
  means that ->dispatched[] and ->run now take up their own
  cacheline.

This shrinks struct blk_mq_hw_ctx down to 8 cachelines.
Signed-off-by: Jens Axboe <axboe@fb.com>

We don't need the larger delayed work struct, since we always run it
immediately.
Signed-off-by: Jens Axboe <axboe@fb.com>

Add a helper to schedule a regular struct work on a particular CPU.
Signed-off-by: Jens Axboe <axboe@fb.com>

Like cancel_delayed_work(), but for regular work.
Signed-off-by: Jens Axboe <axboe@fb.com>
Mehed-by: Tejun Heo <tj@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>

Pull drm fixes from Dave Airlie:
 "A bunch of fixes covering i915, amdgpu, one tegra and some core DRM
  ones.  Nothing too strange at this point"

* tag 'drm-fixes-for-4.8-rc4' of git://people.freedesktop.org/~airlied/linux: (21 commits)
  drm/atomic: Don't potentially reset color_mgmt_changed on successive property updates.
  drm: Protect fb_defio in drivers with CONFIG_KMS_FBDEV_EMULATION
  drm/amdgpu: skip TV/CV in display parsing
  drm/amdgpu: avoid a possible array overflow
  drm/amdgpu: fix lru size grouping v2
  drm/tegra: dsi: Enhance runtime power management
  drm/i915: Fix botched merge that downgrades CSR versions.
  drm/i915/skl: Ensure pipes with changed wms get added to the state
  drm/i915/gen9: Only copy WM results for changed pipes to skl_hw
  drm/i915/skl: Add support for the SAGV, fix underrun hangs
  drm/i915/gen6+: Interpret mailbox error flags
  drm/i915: Reattach comment, complete type specification
  drm/i915: Unconditionally flush any chipset buffers before execbuf
  drm/i915/gen9: Drop invalid WARN() during data rate calculation
  drm/i915/gen9: Initialize intel_state->active_crtcs during WM sanitization (v2)
  drm: Reject page_flip for !DRIVER_MODESET
  drm/amdgpu: fix timeout value check in amd_sched_job_recovery
  drm/amdgpu: fix sdma_v2_4_ring_test_ib
  drm/amdgpu: fix amdgpu_move_blit on 32bit systems
  drm/radeon: fix radeon_move_blit on 32bit systems
  ...

Due to assigning the 'replaced' value instead of or'ing it,
if drm_atomic_crtc_set_property() gets called multiple times,
the last call will define the color_mgmt_changed flag, so
a non-updating call to a property can reset the flag and
prevent actual hw state updates required by preceding
property updates.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: <stable@vger.kernel.org> # v4.6+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull perf fixes from Thomas Gleixner:
 "A few fixes from the perf departement

   - prevent a imbalanced preemption disable in the events teardown code
   - prevent out of bound acces in perf userspace
   - make perf tools compile with UCLIBC again
   - a fix for the userspace unwinder utility"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Use this_cpu_ptr() when stopping AUX events
  perf evsel: Do not access outside hw cache name arrays
  tools lib: Reinstate strlcpy() header guard with __UCLIBC__
  perf unwind: Use addr_location::addr instead of ip for entries

Pull x86 fix from Thomas Gleixner:
 "A single bugfix to prevent irq remapping when the ioapic is disabled"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic: Do not init irq remapping if ioapic is disabled

Pull irq fixes from Thomas Gleixner:
 "This lot provides:

   - plug a hotplug race in the new affinity infrastructure
   - a fix for the trigger type of chained interrupts
   - plug a potential memory leak in the core code
   - a few fixes for ARM and MIPS GICs"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/mips-gic: Implement activate op for device domain
  irqchip/mips-gic: Cleanup chip and handler setup
  genirq/affinity: Use get/put_online_cpus around cpumask operations
  genirq: Fix potential memleak when failing to get irq pm
  irqchip/gicv3-its: Disable the ITS before initializing it
  irqchip/gicv3: Remove disabling redistributor and group1 non-secure interrupts
  irqchip/gic: Allow self-SGIs for SMP on UP configurations
  genirq: Correctly configure the trigger on chained interrupts

Pull timer fixes from Thomas Gleixner:
 "A few updates for timers & co:

   - prevent a livelock in the timekeeping code when debugging is
     enabled

   - prevent out of bounds access in the timekeeping debug code

   - various fixes in clocksource drivers

   - a new maintainers entry"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/sun4i: Clear interrupts after stopping timer in probe function
  drivers/clocksource/pistachio: Fix memory corruption in init
  clocksource/drivers/timer-atmel-pit: Enable mck clock
  clocksource/drivers/pxa: Fix include files for compilation
  MAINTAINERS: Add ARM ARCHITECTED TIMER entry
  timekeeping: Cap array access in timekeeping_debug
  timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING

Pull KVM fixes from Paolo Bonzini:
 "ARM:
   - fixes for ITS init issues, error handling, IRQ leakage, race
     conditions
   - an erratum workaround for timers
   - some removal of misleading use of errors and comments
   - a fix for GICv3 on 32-bit guests

  MIPS:
   - fix for where the guest could wrongly map the first page of
     physical memory

  x86:
   - nested virtualization fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  MIPS: KVM: Check for pfn noslot case
  kvm: nVMX: fix nested tsc scaling
  KVM: nVMX: postpone VMCS changes on MSR_IA32_APICBASE write
  KVM: nVMX: fix msr bitmaps to prevent L2 from accessing L0 x2APIC
  arm64: KVM: report configured SRE value to 32-bit world
  arm64: KVM: remove misleading comment on pmu status
  KVM: arm/arm64: timer: Workaround misconfigured timer interrupt
  arm64: Document workaround for Cortex-A72 erratum #853709
  KVM: arm/arm64: Change misleading use of is_error_pfn
  KVM: arm64: ITS: avoid re-mapping LPIs
  KVM: arm64: check for ITS device on MSI injection
  KVM: arm64: ITS: move ITS registration into first VCPU run
  KVM: arm64: vgic-its: Make updates to propbaser/pendbaser atomic
  KVM: arm64: vgic-its: Plug race in vgic_put_irq
  KVM: arm64: vgic-its: Handle errors from vgic_add_lpi
  KVM: arm64: ITS: return 1 on successful MSI injection

Merge fixes from Andrew Morton:
 "11 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: silently skip readahead for DAX inodes
  dax: fix device-dax region base
  fs/seq_file: fix out-of-bounds read
  mm: memcontrol: avoid unused function warning
  mm: clarify COMPACTION Kconfig text
  treewide: replace config_enabled() with IS_ENABLED() (2nd round)
  printk: fix parsing of "brl=" option
  soft_dirty: fix soft_dirty during THP split
  sysctl: handle error writing UINT_MAX to u32 fields
  get_maintainer: quiet noisy implicit -f vcs_file_exists checking
  byteswap: don't use __builtin_bswap*() with sparse

Pull ARM64 fix from Catalin Marinas:
 "ARM64 fix to avoid potential TLB conflict when CONFIG_RANDOMIZE_BASE
  is enabled"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: avoid TLB conflict with CONFIG_RANDOMIZE_BASE

Pull rdma fixes from Doug Ledford:
 "Round one of 4.8 rc fixes.

  This should be the bulk of the -rc fixes for 4.8.  I only have a few
  things that are still outstanding (two ipoib bugs for which the
  solution is not yet fully known, and a few queued items that came in
  after my last push and I didn't want to delay this pull request for
  late comers again).

  Even though the patch count is kind of high, everything is minor fixes
  so the overall churn is pretty low.

  Summary:

   - minor fixes to cxgb4
   - minor fixes to mlx4
   - one minor fix each to core, rxe, isert, srpt, mlx5, ocrdma, and usnic
   - six or so fixes to i40iw fixes
   - the rest are hfi1 fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (34 commits)
  i40iw: Send last streaming mode message for loopback connections
  IB/srpt: Update sport->port_guid with each port refresh
  RDMA/ocrdma: Fix the max_sge reported from FW
  i40iw: Avoid writing to freed memory
  i40iw: Fix double free of allocated_buffer
  IB/mlx5: Remove superfluous include of io-mapping.h
  i40iw: Do not set self-referencing pointer to NULL after kfree
  i40iw: Add missing NULL check for MPA private data
  iw_cxgb4: Fix cxgb4 arm CQ logic w/IB_CQ_REPORT_MISSED_EVENTS
  i40iw: Add missing check for interface already open
  i40iw: Protect req_resource_num update
  i40iw: Change mem_resources pointer to a u8
  IB/core: Use memdup_user() rather than duplicating its implementation
  IB/qib: Use memdup_user() rather than duplicating its implementation
  iw_cxgb4: use the MPA initiator's IRD if < our ORD
  iw_cxgb4: limit IRD/ORD advertised to ULP by device max.
  IB/hfi1: Fix mm_struct use after free
  IB/rdmvat: Fix double vfree() in rvt_create_qp() error path
  IB/hfi1: Improve J_KEY generation
  IB/hfi1: Return invalid field for non-QSFP CableInfo queries
  ...