- 19 Nov, 2020 6 commits
-
-
Pierre-Louis Bossart authored
The Atom/SST driver does not rely on ASoC power management, but the SOF driver does. Rather than using a hard-coded build-time assignment, we can set this pm_ops dynamically depending on what the parent is. That will remove the last build-time dependency and allow for coexistence of both SST and SOF drivers for Baytrail/Cherrytrail. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Rander Wang <rander.wang@linux.intel.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20201112223825.39765-7-pierre-louis.bossart@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
To avoid hard-coded variations between SOF and SST drivers, set the card name and driver dynamically depending on the parent type. This is the first pass required to let distributions select which drivers to use with kernel parameters instead of build-time selection. Signed-off-by:
-
Pierre-Louis Bossart authored
Intel machine drivers are used by parent platform drivers based on closed-source firmware (Atom/SST and catpt) and SOF-based ones. In some cases for ACPI-based platforms, the behavior of machine drivers needs to be modified depending on the parent type, typically for card names and power management. An initial solution based on passing a boolean flag as a platform device parameter was tested earlier. Since it looked overkill, this patch suggests instead a simple string comparison to identify an SOF parent device/driver. Suggested-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
Mirror capabilities provided for PCI devices, so that distributions can select which ACPI driver is loaded at run-time with kernel parameters and DMI tables instead of forcing a build-time selection. The "legacy" option supported for HDaudio has no meaning here and will be ignored. The 'SST' driver based on closed-source firmware has the priority to avoid any impact on users, and the choice to use SOF is strictly opt-in. This may change at some point when the 'SST' driver is deprecated on Baytrail/Cherrytrail. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Reviewed-by:
-
Pierre-Louis Bossart authored
For some reason this ops is missing in 2 out of the 3 broadwell drivers. Add to make sure ASoC takes care of power management. Tested-by:
Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
For some reason this ops is missing in 2 out of the 3 broadwell drivers. Add to make sure ASoC takes care of power management. Tested-by:
-
- 18 Nov, 2020 21 commits
-
-
Mark Brown authored
Merge series "ASoC: soc-component: add snd_soc_component_xxx()" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark These are v2 of snd_soc_component_compr_xxx() function patches. I think component related function should be implemented at soc-component.c, otherwise it is confusable to read. These are for it. v1 -> v2 - fixup function return timing on snd_soc_component_compr_get_params() snd_soc_component_compr_get_metadata() - use mutex at compr side on snd_soc_component_compr_get_caps() snd_soc_component_compr_get_codec_caps() snd_soc_component_compr_copy() Link: https://lore.kernel.org/r/878sb78ac4.wl-kuninori.morimoto.gx@renesas.com Kuninori Morimoto (12): ASoC: soc-component: add snd_soc_component_compr_open() ASoC: soc-component: add snd_soc_component_compr_free() ASoC: soc-component: add snd_soc_component_compr_trigger() ASoC: soc-component: add snd_soc_component_compr_set_params() ASoC: soc-component: add snd_soc_component_compr_get_params() ASoC: soc-component: add snd_soc_component_compr_get_caps() ASoC: soc-component: add snd_soc_component_compr_get_codec_caps() ASoC: soc-component: add snd_soc_component_compr_ack() ASoC: soc-component: add snd_soc_component_compr_pointer() ASoC: soc-component: add snd_soc_component_compr_copy() ASoC: soc-component: add snd_soc_component_compr_set_metadata() ASoC: soc-component: add snd_soc_component_compr_get_metadata() include/sound/soc-component.h | 22 +++ sound/soc/soc-component.c | 255 ++++++++++++++++++++++++++++++++ sound/soc/soc-compress.c | 263 ++++------------------------------ 3 files changed, 303 insertions(+), 237 deletions(-) -- 2.25.1
-
Mark Brown authored
This series updates Sameer's patch to repartition the graph card binding schema and incorporate the OF graph schema. The schema was also mixing card node and DAI node properties, so I've split the DAI part (the 'port' node) into a separate schema. There's another problem that 'frame-master' and 'bitclock-master' have inconsistent types of boolean and phandle. Having the properties just point to the local or remote endpoint within an endpoint node is kind of pointless. We should have gone with just boolean, but looks like we already have several users. MMP OLPC is the one platform using boolean, but it happens to work because the properties are effectively ignored and CPU DAI as the master is the default. Rob Rob Herring (3): ASoC: dt-bindings: Use OF graph schema ASoC: dt-bindings: marvell,mmp-sspa: Use audio-graph-port schema ASoC: dt-bindings: Refine 'frame-master' and 'bitclock-master' type Sameer Pujar (1): ASoC: audio-graph-card: Refactor schema .../bindings/sound/audio-graph-card.yaml | 106 +----------------- .../bindings/sound/audio-graph-port.yaml | 72 ++++++++++++ .../bindings/sound/audio-graph.yaml | 45 ++++++++ .../bindings/sound/marvell,mmp-sspa.yaml | 25 +---- .../bindings/sound/renesas,rsnd.yaml | 12 +- .../bindings/sound/simple-card.yaml | 6 +- 6 files changed, 132 insertions(+), 134 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/audio-graph-port.yaml create mode 100644 Documentation/devicetree/bindings/sound/audio-graph.yaml base-commit: e2e99930ec006c6fe1d62af339a765ade71a0d9a -- 2.25.1
-
Jiaxin Yu authored
This reverts commit 1afc60e0 (dt-bindings: mediatek: mt8192: add audio afe document). https://mailman.alsa-project.org/pipermail/alsa-devel/2020-November/176873.html These dependency are continuing to upstream, I will revert this patch first. After the dependencies are merged, I will send 'mt8192-afe-pcm.yaml' again. [Massaged commit message to put hint about issue being fixed into there rather than the trailer -- broonie] Signed-off-by:
Jiaxin Yu <jiaxin.yu@mediatek.com> Acked-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1605081920-11848-1-git-send-email-jiaxin.yu@mediatek.comSigned-off-by:
-
Zou Wei authored
./sound/soc/samsung/midas_wm1811.c:534:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by:
Zou Wei <zou_wei@huawei.com> Reviewed-by:
Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/1605529740-68757-1-git-send-email-zou_wei@huawei.comSigned-off-by:
-
Kyle Russell authored
The transmit phase register value is never cleared during hw params. So once hw params sets this bit to handle a two channel format, it remains configured for dual-phase, which is not desirable for mono playback. Signed-off-by:
Kyle Russell <bkylerussell@gmail.com> Link: https://lore.kernel.org/r/20201106145905.365903-1-bkylerussell@gmail.comSigned-off-by:
-
Kaixu Xia authored
The '>=' expression itself is bool, no need to convert it to bool. Fix the following coccicheck warning: ./sound/soc/codecs/wcd9335.c:3982:25-30: WARNING: conversion to bool not needed here Reported-by:
Tosk Robot <tencent_os_robot@tencent.com> Signed-off-by:
Kaixu Xia <kaixuxia@tencent.com> Link: https://lore.kernel.org/r/1604652816-1330-1-git-send-email-kaixuxia@tencent.comSigned-off-by:
-
Rob Herring authored
'frame-master' and 'bitclock-master' are only a single phandle, so use the more specific 'phandle' type definition instead. Signed-off-by:
Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/20201117013349.2458416-5-robh@kernel.orgSigned-off-by:
-
Rob Herring authored
Now that we have a graph schema, reference it from the marvell,mmp-sspa schema. Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/20201117013349.2458416-4-robh@kernel.orgSigned-off-by:
-
Sameer Pujar authored
There can be customized sound cards which are based on generic audio graph. In such cases most of the stuff is reused from generic audio graph. To facilitate this, refactor audio graph schema into multiple files and the base schema can be reused for specific sound cards. The graph card nodes and port nodes are separate entities, so they should be separate schemas. Signed-off-by:
-
Kuninori Morimoto authored
component related function should be implemented at soc-component.c. This patch adds snd_soc_component_compr_get_metadata(). Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
-
Kuninori Morimoto authored
component related function should be implemented at soc-component.c. This patch adds snd_soc_component_compr_set_metadata(). Signed-off-by:
-
Kuninori Morimoto authored
component related function should be implemented at soc-component.c. This patch adds snd_soc_component_compr_copy(). Signed-off-by:
-
Kuninori Morimoto authored
component related function should be implemented at soc-component.c. This patch adds snd_soc_component_compr_pointer(). Signed-off-by:
-
Kuninori Morimoto authored
component related function should be implemented at soc-component.c. This patch adds snd_soc_component_compr_ack(). Signed-off-by:
-
Kuninori Morimoto authored
component related function should be implemented at soc-component.c. This patch adds snd_soc_component_compr_get_codec_caps(). Signed-off-by:
-
Kuninori Morimoto authored
component related function should be implemented at soc-component.c. This patch adds snd_soc_component_compr_get_caps(). Signed-off-by:
-
Kuninori Morimoto authored
component related function should be implemented at soc-component.c. This patch adds snd_soc_component_compr_get_params(). Signed-off-by:
-
Kuninori Morimoto authored
component related function should be implemented at soc-component.c. This patch moves soc-compress soc_compr_components_set_params() to soc-component as snd_soc_component_compr_set_params(). Signed-off-by:
-
Kuninori Morimoto authored
component related function should be implemented at soc-component.c. This patch moves soc-compress soc_compr_components_trigger() to soc-component as snd_soc_component_compr_trigger(). Signed-off-by:
-
Kuninori Morimoto authored
component related function should be implemented at soc-component.c. This patch moves soc-compress soc_compr_components_free() to soc-component as snd_soc_component_compr_free(). Signed-off-by:
-
Kuninori Morimoto authored
component related function should be implemented at soc-component.c. This patch moves soc-compress soc_compr_components_open() to soc-component as snd_soc_component_compr_open(). Signed-off-by:
-
- 17 Nov, 2020 5 commits
-
-
Geert Uytterhoeven authored
Some entries used 7 or 8 spaces instead if a single TAB. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20201110174904.3413846-1-geert@linux-m68k.orgSigned-off-by:
-
Geert Uytterhoeven authored
The Intel Keem Bay audio module is only present on Intel Keem Bay SoCs. Hence add a dependency on ARCH_KEEMBAY, to prevent asking the user about this driver when configuring a kernel without Intel Keem Bay platform support. Fixes: c544912b ("ASoC: Intel: Add makefiles and kconfig changes for KeemBay") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201110145001.3280479-1-geert+renesas@glider.beSigned-off-by:
-
Geert Uytterhoeven authored
The Freescale/NXP AUDIO TO HDMI TX module is only present on NXP i.MX 8 Series SoCs. Hence add a dependency on ARCH_MXC, to prevent asking the user about this driver when configuring a kernel without i.MX 8 platform support. Fixes: 8a24c834 ("ASoC: fsl_aud2htx: Add aud2htx module driver") Signed-off-by:
-
Bogdan Togorean authored
Audio ADI reference designs are also used on some ZynqMP boards, and can also be used on Intel FPGA boards and also on some more complex FPGA combinations (FPGA cards connected through PCIe). This change removes the dependency on Microblaze and Zynq architectures to allow the usage of this driver for the systems described above. Signed-off-by:
Bogdan Togorean <bogdan.togorean@analog.com> Signed-off-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201110152213.37811-1-alexandru.ardelean@analog.comSigned-off-by:
-
Alexandru Ardelean authored
This change converts the old device-tree binding for ADAU1977 from text format to the new yaml format. Signed-off-by:
-
- 16 Nov, 2020 8 commits
-
-
Mark Brown authored
Merge series "ASoC: Intel: catpt: Offload fixes and code optimization" from Cezary Rojewski <cezary.rojewski@intel.com>: First two of the series address bugs connected mainly to offload streams: - scenarios with very low buffer sizes: RESET_STREAM IPC timeouts - fix lp clock selection when switching between PAUSE <-> RESUME states: glitches on first offload when no additional stream is opened simultaneously Follow ups are: code reduction and optimization oriented patches. This has been foretold in: [PATCH v10 00/14] ASoC: Intel: Catpt - Lynx and Wildcat point https://www.spinics.net/lists/alsa-devel/msg116440.html Note: LPT power up/down sequences might get aligned with WPT once enough testing is done as capabilities are shared for both DSPs. First, optimize applying of user settings - prevent redundand calls from happening - and then as mentioned above, streamline power on/off sequence for LPT and WPT. Cezary Rojewski (5): ASoC: Intel: catpt: Skip position update for unprepared streams ASoC: Intel: catpt: Correct clock selection for dai trigger ASoC: Intel: catpt: Optimize applying user settings ASoC: Intel: catpt: Streamline power routines across LPT and WPT ASoC: Intel: catpt: Cleanup after power routines streamlining sound/soc/intel/catpt/core.h | 10 ++- sound/soc/intel/catpt/device.c | 18 +++--- sound/soc/intel/catpt/dsp.c | 56 ++-------------- sound/soc/intel/catpt/pcm.c | 113 ++++++++++++++++----------------- 4 files changed, 74 insertions(+), 123 deletions(-) -- 2.17.1 base-commit: 3650b228
-
Mark Brown authored
Merge series "ASoC: pcm512x: Patch series to set fmt from `set_fmt()`" from Kirill Marinushkin <kmarinushkin@birdec.com>: Set format from `set_fmt()` func instead of `hw_params()`, plus supportive commits Kirill Marinushkin (4): ASoC: pcm512x: Fix not setting word length if DAIFMT_CBS_CFS ASoC: pcm512x: Rearrange operations in `hw_params()` ASoC: pcm512x: Move format check into `set_fmt()` ASoC: pcm512x: Add support for more data formats sound/soc/codecs/pcm512x.c | 134 ++++++++++++++++++++++++++++----------------- 1 file changed, 84 insertions(+), 50 deletions(-) -- 2.13.6
-
V Sujith Kumar Reddy authored
Register shutdown handler to stop sc7180 lpass platform driver and to disable audio clocks. Signed-off-by:
V Sujith Kumar Reddy <vsujithk@codeaurora.org> Signed-off-by:
Srinivasa Rao Mandadapu <srivasam@codeaurora.org> Link: https://lore.kernel.org/r/1605292702-25046-1-git-send-email-srivasam@codeaurora.orgSigned-off-by:
-
V Sujith Kumar Reddy authored
Add 32 bit format support for capture in lpass-sc7180 snd_soc_dai_driver capabilities. Need to add contstraints in machine driver so that only specific format allowed. Signed-off-by:
-
Kai Vehmanen authored
Add Kconfig entries, PCI ID and chip info for Alderlake-S product. Signed-off-by:
-
Jerome Brunet authored
When compiled with CONFIG_HAVE_CLK, the kernel need to get provider for the clock API. This is usually selected by the platform and the sound drivers should not really care about this. However COMPILE_TEST is special and the platform required may not have been selected, leading to this type of error: > aiu-encoder-spdif.c:(.text+0x3a0): undefined reference to `clk_set_parent' Since we need a sane provider of the API with COMPILE_TEST, depends on COMMON_CLK. Fixes: 6dc4fa17 ("ASoC: meson: add axg fifo base driver") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20201116172423.546855-1-jbrunet@baylibre.comSigned-off-by:
-
Dan Carpenter authored
The "no_headphone" variable is never set to "false" so it could be uninitialized. Fixes: e936619b ("ASoC: qcom: sc7180: Modify machine driver for sound card") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201116125950.GA44063@mwandaSigned-off-by:
-
Cezary Rojewski authored
With LPT switching to WPT-based power on/off routines, functions that have been previously used by it are rendered redundant so remove them. Signed-off-by:
-
