When running test_kmod.sh the following shows up

 # sysctl cannot stat /proc/sys/net/core/bpf_jit_enable No such file or directory
 cannot: stat_/proc/sys/net/core/bpf_jit_enable #
 # sysctl cannot stat /proc/sys/net/core/bpf_jit_harden No such file or directory
 cannot: stat_/proc/sys/net/core/bpf_jit_harden #

Rework to enable CONFIG_BPF_JIT to solve "No such file or directory"
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

test_btf_dump fails when run with O=, because it needs to access source
files and assumes they live in ./progs/, which is not the case in this
scenario.

Fix by instructing kselftest to copy btf_dump_test_case_*.c files to the
test directory. Since kselftest does not preserve directory structure,
adjust the test to look in ./progs/ and then in ./.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

test_cgroup_storage fails on s390 with an assertion failure: packets are
dropped when they shouldn't. The problem is that BPF_DW packet count is
accessed as BPF_W with an offset of 0, which is not correct on
big-endian machines.

Since the point of this test is not to verify narrow loads/stores,
simply use BPF_DW when working with packet counts.

Fixes: 68cfa3ac ("selftests/bpf: add a cgroup storage test")
Fixes: 919646d2 ("selftests/bpf: extend the storage test to test per-cpu cgroup storage")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Fix mem leak caused by missed unpin routine for umem pages.

Fixes: 8aef7340 ("xsk: introduce xdp_umem_page")
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

When showing metadata about a single program by invoking
"bpftool prog show PROG", the file descriptor referring to the program
is not closed before returning from the function. Let's close it.

Fixes: 71bb428f ("tools: bpf: add bpftool")
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

"bind4 allow specific IP & port" and "bind6 deny specific IP & port"
fail on s390 because of endianness issue: the 4 IP address bytes are
loaded as a word and compared with a constant, but the value of this
constant should be different on big- and little- endian machines, which
is not the case right now.

Use __bpf_constant_ntohl to generate proper value based on machine
endianness.

Fixes: 1d436885 ("selftests/bpf: Selftest for sys_bind post-hooks.")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

"p runtime/jit: pass > 32bit index to tail_call" fails when
bpf_jit_enable=1, because the tail call is not executed.

This in turn is because the generated code assumes index is 64-bit,
while it must be 32-bit, and as a result prog array bounds check fails,
while it should pass. Even if bounds check would have passed, the code
that follows uses 64-bit index to compute prog array offset.

Fix by using clrj instead of clgrj for comparing index with array size,
and also by using llgfr for truncating index to 32 bits before using it
to compute prog array offset.

Fixes: 6651ee07 ("s390/bpf: implement bpf_tail_call() helper")
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

"masking, test in bounds 3" fails on s390, because
BPF_ALU64_IMM(BPF_NEG, BPF_REG_2, 0) ignores the top 32 bits of
BPF_REG_2. The reason is that JIT emits lcgfr instead of lcgr.
The associated comment indicates that the code was intended to
emit lcgr in the first place, it's just that the wrong opcode
was used.

Fix by using the correct opcode.

Fixes: 05462310 ("s390/bpf: Add s390x eBPF JIT compiler backend")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

clang warns:

drivers/net/ethernet/toshiba/tc35815.c:1507:30: warning: use of logical
'&&' with constant operand [-Wconstant-logical-operand]
                        if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN)
                                                  ^  ~~~~~~~~~~~~
drivers/net/ethernet/toshiba/tc35815.c:1507:30: note: use '&' for a
bitwise operation
                        if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN)
                                                  ^~
                                                  &
drivers/net/ethernet/toshiba/tc35815.c:1507:30: note: remove constant to
silence this warning
                        if (!HAVE_DMA_RXALIGN(lp) && NET_IP_ALIGN)
                                                 ~^~~~~~~~~~~~~~~
1 warning generated.

Explicitly check that NET_IP_ALIGN is not zero, which matches how this
is checked in other parts of the tree. Because NET_IP_ALIGN is a build
time constant, this check will be constant folded away during
optimization.

Fixes: 82a9928d ("tc35815: Enable StripCRC feature")
Link: https://github.com/ClangBuiltLinux/linux/issues/608Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We set the field 'addr_trial_end' to 'jiffies', instead of the current
value 0, at the moment the node address is initialized. This guarantees
we don't inadvertently enter an address trial period when the node
address is explicitly set by the user.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The dsa framework has optional .port_mdb_{prepare,add,del} callback fields
for drivers to handle multicast database entries. When adding an entry, the
framework goes through a prepare phase, then a commit phase. Drivers not
providing these callbacks should be detected in the prepare phase.

DSA core may still bypass the bridge layer and call the dsa_port_mdb_add
function directly with no prepare phase or no switchdev trans object,
and the framework ends up calling an undefined .port_mdb_add callback.
This results in a NULL pointer dereference, as shown in the log below.

The other functions seem to be properly guarded. Do the same for
.port_mdb_add in dsa_switch_mdb_add_bitmap() as well.

    8<--- cut here ---
    Unable to handle kernel NULL pointer dereference at virtual address 00000000
    pgd = (ptrval)
    [00000000] *pgd=00000000
    Internal error: Oops: 80000005 [#1] SMP ARM
    Modules linked in: rtl8xxxu rtl8192cu rtl_usb rtl8192c_common rtlwifi mac80211 cfg80211
    CPU: 1 PID: 134 Comm: kworker/1:2 Not tainted 5.3.0-rc1-00247-gd3519030752a #1
    Hardware name: Allwinner sun7i (A20) Family
    Workqueue: events switchdev_deferred_process_work
    PC is at 0x0
    LR is at dsa_switch_event+0x570/0x620
    pc : [<00000000>]    lr : [<c08533ec>]    psr: 80070013
    sp : ee871db8  ip : 00000000  fp : ee98d0a4
    r10: 0000000c  r9 : 00000008  r8 : ee89f710
    r7 : ee98d040  r6 : ee98d088  r5 : c0f04c48  r4 : ee98d04c
    r3 : 00000000  r2 : ee89f710  r1 : 00000008  r0 : ee98d040
    Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
    Control: 10c5387d  Table: 6deb406a  DAC: 00000051
    Process kworker/1:2 (pid: 134, stack limit = 0x(ptrval))
    Stack: (0xee871db8 to 0xee872000)
    1da0:                                                       ee871e14 103ace2d
    1dc0: 00000000 ffffffff 00000000 ee871e14 00000005 00000000 c08524a0 00000000
    1de0: ffffe000 c014bdfc c0f04c48 ee871e98 c0f04c48 ee9e5000 c0851120 c014bef0
    1e00: 00000000 b643aea2 ee9b4068 c08509a8 ee2bf940 ee89f710 ee871ecb 00000000
    1e20: 00000008 103ace2d 00000000 c087e248 ee29c868 103ace2d 00000001 ffffffff
    1e40: 00000000 ee871e98 00000006 00000000 c0fb2a50 c087e2d0 ffffffff c08523c4
    1e60: ffffffff c014bdfc 00000006 c0fad2d0 ee871e98 ee89f710 00000000 c014c500
    1e80: 00000000 ee89f3c0 c0f04c48 00000000 ee9e5000 c087dfb4 ee9e5000 00000000
    1ea0: ee89f710 ee871ecb 00000001 103ace2d 00000000 c0f04c48 00000000 c087e0a8
    1ec0: 00000000 efd9a3e0 0089f3c0 103ace2d ee89f700 ee89f710 ee9e5000 00000122
    1ee0: 00000100 c087e130 ee89f700 c0fad2c8 c1003ef0 c087de4c 2e928000 c0fad2ec
    1f00: c0fad2ec ee839580 ef7a62c0 ef7a9400 00000000 c087def8 c0fad2ec c01447dc
    1f20: ef315640 ef7a62c0 00000008 ee839580 ee839594 ef7a62c0 00000008 c0f03d00
    1f40: ef7a62d8 ef7a62c0 ffffe000 c0145b84 ffffe000 c0fb2420 c0bfaa8c 00000000
    1f60: ffffe000 ee84b600 ee84b5c0 00000000 ee870000 ee839580 c0145b40 ef0e5ea4
    1f80: ee84b61c c014a6f8 00000001 ee84b5c0 c014a5b0 00000000 00000000 00000000
    1fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000
    1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
    1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
    [<c08533ec>] (dsa_switch_event) from [<c014bdfc>] (notifier_call_chain+0x48/0x84)
    [<c014bdfc>] (notifier_call_chain) from [<c014bef0>] (raw_notifier_call_chain+0x18/0x20)
    [<c014bef0>] (raw_notifier_call_chain) from [<c08509a8>] (dsa_port_mdb_add+0x48/0x74)
    [<c08509a8>] (dsa_port_mdb_add) from [<c087e248>] (__switchdev_handle_port_obj_add+0x54/0xd4)
    [<c087e248>] (__switchdev_handle_port_obj_add) from [<c087e2d0>] (switchdev_handle_port_obj_add+0x8/0x14)
    [<c087e2d0>] (switchdev_handle_port_obj_add) from [<c08523c4>] (dsa_slave_switchdev_blocking_event+0x94/0xa4)
    [<c08523c4>] (dsa_slave_switchdev_blocking_event) from [<c014bdfc>] (notifier_call_chain+0x48/0x84)
    [<c014bdfc>] (notifier_call_chain) from [<c014c500>] (blocking_notifier_call_chain+0x50/0x68)
    [<c014c500>] (blocking_notifier_call_chain) from [<c087dfb4>] (switchdev_port_obj_notify+0x44/0xa8)
    [<c087dfb4>] (switchdev_port_obj_notify) from [<c087e0a8>] (switchdev_port_obj_add_now+0x90/0x104)
    [<c087e0a8>] (switchdev_port_obj_add_now) from [<c087e130>] (switchdev_port_obj_add_deferred+0x14/0x5c)
    [<c087e130>] (switchdev_port_obj_add_deferred) from [<c087de4c>] (switchdev_deferred_process+0x64/0x104)
    [<c087de4c>] (switchdev_deferred_process) from [<c087def8>] (switchdev_deferred_process_work+0xc/0x14)
    [<c087def8>] (switchdev_deferred_process_work) from [<c01447dc>] (process_one_work+0x218/0x50c)
    [<c01447dc>] (process_one_work) from [<c0145b84>] (worker_thread+0x44/0x5bc)
    [<c0145b84>] (worker_thread) from [<c014a6f8>] (kthread+0x148/0x150)
    [<c014a6f8>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
    Exception stack(0xee871fb0 to 0xee871ff8)
    1fa0:                                     00000000 00000000 00000000 00000000
    1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
    1fe0: 00000000 00000000 00000000 00000000 00000013 00000000
    Code: bad PC value
    ---[ end trace 1292c61abd17b130 ]---

    [<c08533ec>] (dsa_switch_event) from [<c014bdfc>] (notifier_call_chain+0x48/0x84)
    corresponds to

	$ arm-linux-gnueabihf-addr2line -C -i -e vmlinux c08533ec

	linux/net/dsa/switch.c:156
	linux/net/dsa/switch.c:178
	linux/net/dsa/switch.c:328

Fixes: e6db98db ("net: dsa: add switch mdb bitmap functions")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To identify timestamps for matching with their packets, Spectrum-1 uses a
five-tuple of (port, direction, domain number, message type, sequence ID).
If there are several clients from the same domain behind a single port
sending Delay_Req's, the only thing differentiating these packets, as far
as Spectrum-1 is concerned, is the sequence ID. Should sequence IDs between
individual clients be similar, conflicts may arise. That is not a problem
to hardware, which will simply deliver timestamps on a first comes, first
served basis.

However the driver uses a simple hash table to store the unmatched pieces.
When a new conflicting piece arrives, it pushes out the previously stored
one, which if it is a packet, is delivered without timestamp. Later on as
the corresponding timestamps arrive, the first one is mismatched to the
second packet, and the second one is never matched and eventually is GCd.

To correct this issue, instead of using a simple rhashtable, use rhltable
to keep the unmatched entries.

Previously, a found unmatched entry would always be removed from the hash
table. That is not the case anymore--an incompatible entry is left in the
hash table. Therefore removal from the hash table cannot be used to confirm
the validity of the looked-up pointer, instead the lookup would simply need
to be redone. Therefore move it inside the critical section. This
simplifies a lot of the code.

Fixes: 87486427 ("mlxsw: spectrum: PTP: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls")
Reported-by: Alex Veber <alexve@mellanox.com>
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adjust the function names in two doc comments to match the corresponding
functions.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix rxrpc_unuse_local() to handle a NULL local pointer as it can be called
on an unbound socket on which rx->local is not yet set.

The following reproduced (includes omitted):

	int main(void)
	{
		socket(AF_RXRPC, SOCK_DGRAM, AF_INET);
		return 0;
	}

causes the following oops to occur:

	BUG: kernel NULL pointer dereference, address: 0000000000000010
	...
	RIP: 0010:rxrpc_unuse_local+0x8/0x1b
	...
	Call Trace:
	 rxrpc_release+0x2b5/0x338
	 __sock_release+0x37/0xa1
	 sock_close+0x14/0x17
	 __fput+0x115/0x1e9
	 task_work_run+0x72/0x98
	 do_exit+0x51b/0xa7a
	 ? __context_tracking_exit+0x4e/0x10e
	 do_group_exit+0xab/0xab
	 __x64_sys_exit_group+0x14/0x17
	 do_syscall_64+0x89/0x1d4
	 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Reported-by: syzbot+20dee719a2e090427b5f@syzkaller.appspotmail.com
Fixes: 730c5fd4 ("rxrpc: Fix local endpoint refcounting")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prior to the commit in the fixes tag, the resource controller in netdevsim
tracked fib entries and rules per network namespace. Restore that behavior.

Fixes: 5fc49422 ("netdevsim: create devlink instance per netdevsim instance")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf 2019-08-11

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) x64 JIT code generation fix for backward-jumps to 1st insn, from Alexei.

2) Fix buggy multi-closing of BTF file descriptor in libbpf, from Andrii.

3) Fix libbpf_num_possible_cpus() to make it thread safe, from Takshak.

4) Fix bpftool to dump an error if pinning fails, from Jakub.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that we swap the original proto and clear the ULP pointer
on close we have to make sure no callback will try to access
the freed state. sk_write_space is not part of sk_prot, remember
to swap it.

Reported-by: syzbot+dcdc9deefaec44785f32@syzkaller.appspotmail.com
Fixes: 95fa1454 ("bpf: sockmap/tls, close can race with map free")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes a warning of "suspicious rcu_dereference_check() usage"
when nload runs.

Fixes: 776e726b ("netvsc: fix RCU warning in get_stats")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2019-08-08

This series introduces some fixes to mlx5 driver.

Highlights:
1) From Tariq, Critical mlx5 kTLS fixes to better align with hw specs.
2) From Aya, Fixes to mlx5 tx devlink health reporter.
3) From Maxim, aRFs parsing to use flow dissector to avoid relying on
invalid skb fields.

Please pull and let me know if there is any problem.

For -stable v4.3
 ('net/mlx5e: Only support tx/rx pause setting for port owner')
For -stable v4.9
 ('net/mlx5e: Use flow keys dissector to parse packets for ARFS')
For -stable v5.1
 ('net/mlx5e: Fix false negative indication on tx reporter CQE recovery')
 ('net/mlx5e: Remove redundant check in CQE recovery flow of tx reporter')
 ('net/mlx5e: ethtool, Avoid setting speed to 56GBASE when autoneg off')

Note: when merged with net-next this minor conflict will pop up:
++<<<<<<< (net-next)
 +      if (is_eswitch_flow) {
 +              flow->esw_attr->match_level = match_level;
 +              flow->esw_attr->tunnel_match_level = tunnel_match_level;
++=======
+       if (flow->flags & MLX5E_TC_FLOW_ESWITCH) {
+               flow->esw_attr->inner_match_level = inner_match_level;
+               flow->esw_attr->outer_match_level = outer_match_level;
++>>>>>>> (net)

To resolve, use hunks from net (2nd) and replace:
if (flow->flags & MLX5E_TC_FLOW_ESWITCH)
with
if (is_eswitch_flow)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

ixgbe_service_task() calls unregister_netdev() under rtnl_lock().
But unregister_netdev() internally calls rtnl_lock().
So deadlock would occur.

Fixes: 59dd45d5 ("ixgbe: firmware recovery mode")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
Fix collisions in socket cookie generation

This change makes the socket cookie generator as a global counter
instead of per netns in order to fix cookie collisions for BPF use
cases we ran into. See main patch #1 for more details.

Given the change is small/trivial and fixes an issue we're seeing
my preference would be net tree (though it cleanly applies to
net-next as well). Went for net tree instead of bpf tree here given
the main change is in net/core/sock_diag.c, but either way would be
fine with me.

v1 -> v2:
  - Fix up commit description in patch #1, thanks Eric!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull in updates in BPF helper function description.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Generating and retrieving socket cookies are a useful feature that is
exposed to BPF for various program types through bpf_get_socket_cookie()
helper.

The fact that the cookie counter is per netns is quite a limitation
for BPF in practice in particular for programs in host namespace that
use socket cookies as part of a map lookup key since they will be
causing socket cookie collisions e.g. when attached to BPF cgroup hooks
or cls_bpf on tc egress in host namespace handling container traffic
from veth or ipvlan devices with peer in different netns. Change the
counter to be global instead.

Socket cookie consumers must assume the value as opqaue in any case.
Not every socket must have a cookie generated and knowledge of the
counter value itself does not provide much value either way hence
conversion to global is fine.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Martynas Pumputis <m@lambda.lt>
Signed-off-by: David S. Miller <davem@davemloft.net>

David Howells says:

====================
Here's a couple of fixes for rxrpc:

 (1) Fix refcounting of the local endpoint.

 (2) Don't calculate or report packet skew information.  This has been
     obsolete since AFS 3.1 and so is a waste of resources.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
First make sure we don't use "prog" in error messages because
the pinning operation could be performed on a map. Second add
back missing error message if pin syscall failed.
====================
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

No error message is currently printed if the pin syscall
itself fails. It got lost in the loadall refactoring.

Fixes: 77380998 ("bpftool: add loadall command")
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Change an error message to work for any object being
pinned not just programs.

Fixes: 71bb428f ("tools: bpf: add bpftool")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Don't bother generating maxSkew in the ACK packet as it has been obsolete
since AFS 3.1.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>

The object lifetime management on the rxrpc_local struct is broken in that
the rxrpc_local_processor() function is expected to clean up and remove an
object - but it may get requeued by packets coming in on the backing UDP
socket once it starts running.

This may result in the assertion in rxrpc_local_rcu() firing because the
memory has been scheduled for RCU destruction whilst still queued:

	rxrpc: Assertion failed
	------------[ cut here ]------------
	kernel BUG at net/rxrpc/local_object.c:468!

Note that if the processor comes around before the RCU free function, it
will just do nothing because ->dead is true.

Fix this by adding a separate refcount to count active users of the
endpoint that causes the endpoint to be destroyed when it reaches 0.

The original refcount can then be used to refcount objects through the work
processor and cause the memory to be rcu freed when that reaches 0.

Fixes: 4f95dd78 ("rxrpc: Rework local endpoint management")
Reported-by: syzbot+1e0edc4b8b7494c28450@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>

As spin_unlock_irq will enable interrupts.
Function tsi108_stat_carry is called from interrupt handler tsi108_irq.
Interrupts are enabled in interrupt handler.
Use spin_lock_irqsave/spin_unlock_irqrestore instead of spin_(un)lock_irq
in IRQ context to avoid this.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should also enable team's vlan tx offload in hw_enc_features,
pass the vlan packets to the slave devices with vlan tci, let the
slave handle vlan tunneling offload implementation.

Fixes: 3268e5cb ("team: Advertise tunneling offload features")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sk_validate_xmit_skb() and drivers depend on the sk member of
struct sk_buff to identify segments requiring encryption.
Any operation which removes or does not preserve the original TLS
socket such as skb_orphan() or skb_clone() will cause clear text
leaks.

Make the TCP socket underlying an offloaded TLS connection
mark all skbs as decrypted, if TLS TX is in offload mode.
Then in sk_validate_xmit_skb() catch skbs which have no socket
(or a socket with no validation) and decrypted flag set.

Note that CONFIG_SOCK_VALIDATE_XMIT, CONFIG_TLS_DEVICE and
sk->sk_validate_xmit_skb are slightly interchangeable right now,
they all imply TLS offload. The new checks are guarded by
CONFIG_TLS_DEVICE because that's the option guarding the
sk_buff->decrypted member.

Second, smaller issue with orphaning is that it breaks
the guarantee that packets will be delivered to device
queues in-order. All TLS offload drivers depend on that
scheduling property. This means skb_orphan_partial()'s
trick of preserving partial socket references will cause
issues in the drivers. We need a full orphan, and as a
result netem delay/throttling will cause all TLS offload
skbs to be dropped.

Reusing the sk_buff->decrypted flag also protects from
leaking clear text when incoming, decrypted skb is redirected
(e.g. by TC).

See commit 0608c69c ("bpf: sk_msg, sock{map|hash} redirect
through ULP") for justification why the internal flag is safe.
The only location which could leak the flag in is tcp_bpf_sendmsg(),
which is taken care of by clearing the previously unused bit.

v2:
 - remove superfluous decrypted mark copy (Willem);
 - remove the stale doc entry (Boris);
 - rely entirely on EOR marking to prevent coalescing (Boris);
 - use an internal sendpages flag instead of marking the socket
   (Boris).
v3 (Willem):
 - reorganize the can_skb_orphan_partial() condition;
 - fix the flag leak-in through tcp_bpf_sendmsg.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Boris Pismenny <borisp@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Roman Mashak says:

====================
Fix batched event generation for skbedit action

When adding or deleting a batch of entries, the kernel sends up to
TCA_ACT_MAX_PRIO (defined to 32 in kernel) entries in an event to user
space. However it does not consider that the action sizes may vary and
require different skb sizes.

For example, consider the following script adding 32 entries with all
supported skbedit parameters and cookie (in order to maximize netlink
messages size):

% cat tc-batch.sh
TC="sudo /mnt/iproute2.git/tc/tc"

$TC actions flush action skbedit
for i in `seq 1 $1`;
do
   cmd="action skbedit queue_mapping 2 priority 10 mark 7/0xaabbccdd \
               ptype host inheritdsfield \
               index $i cookie aabbccddeeff112233445566778800a1 "
   args=$args$cmd
done
$TC actions add $args
%
% ./tc-batch.sh 32
Error: Failed to fill netlink attributes while adding TC action.
We have an error talking to the kernel
%

patch 1 adds callback in tc_action_ops of skbedit action, which calculates
the action size, and passes size to tcf_add_notify()/tcf_del_notify().

patch 2 updates the TDC test suite with relevant skbedit test cases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Update TDC tests with cases varifying ability of TC to install or delete
batches of skbedit actions.
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add get_fill_size() routine used to calculate the action size
when building a batch of events.

Fixes: ca9b0e27 ("pkt_action: add new action skbedit")
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/net/dsa/sja1105/sja1105_main.c: In function sja1105_fdb_dump:
drivers/net/dsa/sja1105/sja1105_main.c:1226:14: warning:
 variable tx_vid set but not used [-Wunused-but-set-variable]
drivers/net/dsa/sja1105/sja1105_main.c:1226:6: warning:
 variable rx_vid set but not used [-Wunused-but-set-variable]

They are not used since commit 6d7c7d94 ("net: dsa:
sja1105: Fix broken learning with vlan_filtering disabled")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As commit 30d8177e ("bonding: Always enable vlan tx offload")
said, we should always enable bonding's vlan tx offload, pass the
vlan packets to the slave devices with vlan tci, let them to handle
vlan implementation.

Now if encapsulation protocols like VXLAN is used, skb->encapsulation
may be set, then the packet is passed to vlan device which based on
bonding device. However in netif_skb_features(), the check of
hw_enc_features:

	 if (skb->encapsulation)
                 features &= dev->hw_enc_features;

clears NETIF_F_HW_VLAN_CTAG_TX/NETIF_F_HW_VLAN_STAG_TX. This results
in same issue in commit 30d8177e like this:

vlan_dev_hard_start_xmit
  -->dev_queue_xmit
    -->validate_xmit_skb
      -->netif_skb_features //NETIF_F_HW_VLAN_CTAG_TX is cleared
      -->validate_xmit_vlan
        -->__vlan_hwaccel_push_inside //skb->tci is cleared
...
 --> bond_start_xmit
   --> bond_xmit_hash //BOND_XMIT_POLICY_ENCAP34
     --> __skb_flow_dissect // nhoff point to IP header
        -->  case htons(ETH_P_8021Q)
             // skb_vlan_tag_present is false, so
             vlan = __skb_header_pointer(skb, nhoff, sizeof(_vlan),
             //vlan point to ip header wrongly

Fixes: b2a103e6 ("bonding: convert to ndo_fix_features")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In error case, all entries should be freed from the sched list
before deleting it. For simplicity use rcu way.

Fixes: 5a781ccb ("tc: Add support for configuring the taprio scheduler")
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPX is no longer supported, but the example in the documentation
might useful. Replace it with IPv6.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Both IPX and TR have not been supported for a while now.
Remove them from the /proc/sys/net documentation.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>