- 26 Aug, 2015 5 commits
-
-
Takashi Iwai authored
In theory, the device may get suspended even at runtime PM suspend. Currently we don't save the mixer state for autopm, and it may bring inconsistency. This patch removes the special handling for autosuspend. Signed-off-by:Takashi Iwai <tiwai@suse.de>
-
Takashi Iwai authored
We can use active refcount for preventing autopm during probe. Signed-off-by: -
Takashi Iwai authored
After the recent fix of runtime PM for USB-audio driver, we got a lockdep warning like: ============================================= [ INFO: possible recursive locking detected ] 4.2.0-rc8+ #61 Not tainted --------------------------------------------- pulseaudio/980 is trying to acquire lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] but task is already holding lock: (&chip->shutdown_rwsem){.+.+.+}, at: [<ffffffffa0355dac>] snd_usb_autoresume+0x1d/0x52 [snd_usb_audio] This comes from snd_usb_autoresume() invoking down_read() and it's used in a nested way. Although it's basically safe, per se (as these are read locks), it's better to reduce such spurious warnings. The read lock is needed to guarantee the execution of "shutdown" (cleanup at disconnection) task after all concurrent tasks are finished. This can be implemented in another better way. Also, the current check of chip->in_pm isn't good enough for protecting the racy execution of multiple auto-resumes. This patch rewrites the logic of snd_usb_autoresume() & co; namely, - The recursive call of autopm is avoided by the new refcount, chip->active. The chip->in_pm flag is removed accordingly. - Instead of rwsem, another refcount, chip->usage_count, is introduced for tracking the period to delay the shutdown procedure. At the last clear of this refcount, wake_up() to the shutdown waiter is called. - The shutdown flag is replaced with shutdown atomic count; this is for reducing the lock. - Two new helpers are introduced to simplify the management of these refcounts; snd_usb_lock_shutdown() increases the usage_count, checks the shutdown state, and does autoresume. snd_usb_unlock_shutdown() does the opposite. Most of mixer and other codes just need this, and simply returns an error if it receives an error from lock. Fixes: 9003ebb1 ('ALSA: usb-audio: Fix runtime PM unbalance') Reported-and-tested-by:Alexnader Kuleshov <kuleshovmail@gmail.com> Signed-off-by:
-
Takashi Iwai authored
The variable pcm can be never NULL since it was rewritten with list_for_each_entry(). Suggested-by:
Markus Osterhoff <linux-kernel@k-raum.org> Signed-off-by:
-
Takashi Iwai authored
When snd_hdac_refresh_widget_sysfs() is called before the first hda_widget_sysfs_init(), the next call overrides and eventually fails. This results in unexpected Oops, something like: BUG: unable to handle kernel NULL pointer dereference at 00000000000000c8 IP: [<ffffffff8180e2a3>] hdmi_chmap_ctl_info+0x23/0x40 The fix is to add a check of the existing sysfs tree. Also, for more safety, this patch adds the checks of device_is_registered() in snd-hdac_refresh_wdiget_sysfs(), too. Fixes: fa4f18b4 ('ALSA: hda - Refresh widgets sysfs at probing Haswell+ HDMI codecs') Bugizlla: https://bugzilla.kernel.org/show_bug.cgi?id=103431Reported-by:
Andreas Reis <andreas.reis@gmail.com> Signed-off-by:
-
- 25 Aug, 2015 6 commits
-
-
Takashi Iwai authored
Otherwise it triggers a compile warning like: sound/ppc/keywest.c:104:1: warning: data definition has no type or storage class sound/ppc/keywest.c:104:1: error: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE' [-Werror=implicit-int] Fixes: a2bc2af6 ('ALSA: ppc: keywest: Export I2C module alias information') Reported-by:
kbuild test robot <fengguang.wu@intel.com> Reviewed-by:
Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by:
-
Javier Martinez Canillas authored
The I2C core always reports the MODALIAS uevent as "i2c:<client name" regardless if the driver was matched using the I2C id_table or the of_match_table. So the driver needs to export the I2C table and this be built into the module or udev won't have the necessary information to auto load the correct module when the device is added. Signed-off-by:
-
Takashi Iwai authored
In the commit [fa4f18b4: ALSA: hda - Refresh widgets sysfs at probing Haswell+ HDMI codecs], snd_hdac_refresh_widget_sysfs() is explicitly called in the codec driver. But this results in refreshing twice, as snd_hdac_refresh_widget_sysfs() itself calls snd_hdac_refresh_widgets() function. Instead, we can replace the call in snd_hda_codec_update_widgets() with snd_hdac_refresh_widget_sysfs(). This also fixes the missing sysfs update for ca0132, too. Signed-off-by:
-
Takashi Iwai authored
-
Takashi Iwai authored
The widget power-saving code tries to turn up/down the power of each widget in the I/O paths that are modified at each jack plug/unplug. The recent report revealed that the power activation leaves some widgets unpowered after plugging. This is because snd_hda_activate_path() turns on path->active flag at the end of the function while the path power management is done before that. Then it's regarded as if nothing is active, and the driver turns off the power. The fix is simply to set the flag at the beginning of the function, before trying to power up. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102521 Cc: <stable@vger.kernel.org> [v4.1+] Signed-off-by:
-
Takashi Iwai authored
The is_active_nid_for_any() function in the generic parser is supposed to check all connections from/to the given widget, but the current code checks only the first input connection (index = 0). This patch corrects the code to check all inputs by passing -1 to index argument. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102521 Cc: <stable@vger.kernel.org> [v4.1+] Signed-off-by:
-
- 24 Aug, 2015 1 commit
-
-
Markus Osterhoff authored
After a for-loop was replaced by list_for_each_entry, see Commit bbbc7e85 ("ALSA: hda - Allocate hda_pcm objects dynamically"), Commit 751e2216 ("ALSA: hda: fix possible null dereference"), a possible NULL pointer dereference has been introduced; this patch adds the NULL check on pcm->pcm, while leaving a potentially superfluous check on pcm itself untouched. Signed-off-by:
-
- 23 Aug, 2015 3 commits
-
-
Jeeja KP authored
Add a helper to find the stream using stream tag and direction. This is useful for drivers to query stream based on stream tag and direction, fox example while downloading FW thru DSP loader code Signed-off-by:
Jeeja KP <jeeja.kp@intel.com> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Vinod Koul authored
spbmaxfifo API is actually a query function not a set function so name it snd_hdac_ext_stream_get_spbmaxfifo() Reported-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Vinod Koul authored
While creating hdac_ext_device, we used hdev for sizeof insteadof edev, which resulted in eventual crash of the system Fix the size here Fixes: a512f561 ('ALSA: hdac: add hdac extended device') Reported-by:
Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by:
-
- 22 Aug, 2015 1 commit
-
-
Dan Carpenter authored
card->shortname is a 32 char string so the sprintf() can theoretically overflow. snd_rawmidi_new() can accept strings up to 64 bytes long. I have made the temporay buf[] array 40 bytes long and changed the sprintf() to snprintf(). Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
- 21 Aug, 2015 14 commits
-
-
Jeeja KP authored
hdac_ext_stream assign doesn't require key mapping as in case of hdac_stream. So for host stream, the key to device mapping needs to be removed. Signed-off-by:
-
Jeeja KP authored
The drivers need to set the spib and maxfifios values, so add these new APIs snd_hdac_ext_stream_set_spib() and snd_hdac_ext_stream_set_spbmaxfifo() APIs For these APIs we also need to have spib and fifos pointer, so add these to hdac_ext_stream and initialize them at stream init Signed-off-by:
-
Jeeja KP authored
New HDA controllers like Skylake sport multiple HDA links, so we need a helper to turn off all the links in one go while suspending the device so add snd_hdac_ext_bus_link_power_down_all() API Signed-off-by:
-
Jeeja KP authored
SPCAP and Mutilink register offset were incorrect as offset needs to be based on capability offset. So correct the offset for read/write of spcap/link register. Signed-off-by:
-
Lars-Peter Clausen authored
Convert the ac97_bus from legacy suspend/resume callbacks to dev_pm_ops. Since there isn't anything special to do at the bus level the bus driver does not have to implement any callbacks. The device driver core will automatically pick up and execute the device's PM ops. As there is only a single AC'97 driver implementing suspend and resume, update both the core and driver at the same time to avoid unnecessary code churn. While we are at it also drop the ifdefs around the suspend/resume functions to increase compile test coverage. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Acked-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Takashi Iwai authored
-
Takashi Iwai authored
Intel Haswell (and later) codec refreshes the widgets tree to expose the whole widget nodes at probing. However, this refresh was missing for sysfs tree. This patch adds the missing piece, as we have now a proper API. Reported-by:
-
Dan Carpenter authored
I believe this probably cannot happen, as the code suggests. There would have to be an kcontrol->index.id which was zero, otherwise this would be prevented in snd_ctl_find_id(). But snd_BUG_ON() is just a WARN() or a no-op so static checkers complain that we keep on going with a negative offset. Let's just handle the error as well as printing a warning. Signed-off-by:
-
Vinod Koul authored
Some codecs like Intel HDMI by default do not show up all the pins, they have to be manually enabled, so we need to refresh the codec widgets and then recreate the sysfs tree. So add new API snd_hdac_refresh_widget_sysfs() to do this. It should be be used by codec driver after sending magic verbs to codec Signed-off-by:
-
Vinod Koul authored
This adds new extended driver objects and API for registering the extended devices. Signed-off-by:
-
Vinod Koul authored
This adds based hdac extended device object which will be used by ASoC HDAC codecs Signed-off-by:
-
Vinod Koul authored
The HDAC extended device objects are created by HDAC extended bus on probe. When controller is removed they should be removed as well, so add API snd_hdac_ext_bus_device_remove for this Signed-off-by:
-
David Henningsson authored
On shutdown/reboot of CX20722, first shut down all EAPDs, then shut down the afg node to D3. Failure to do so can lead to spurious noises from the internal speaker directly after reboot (and before the codec is reinitialized again, i e in BIOS setup or GRUB menus). BugLink: https://bugs.launchpad.net/bugs/1487345Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Jurgen Kramer authored
This patch adds native DSD support for the Gustard DAC-X20U. Signed-off-by:
Jurgen Kramer <gtmkramer@xs4all.nl> Cc: <stable@vger.kernel.org> Signed-off-by:
-
- 19 Aug, 2015 4 commits
-
-
Takashi Iwai authored
Merge tag 'asoc-v4.2-disable-topology' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Disable topology support for v4.2 The topology code merged in the v4.2 merge window introduced a new ABI which was believed to be suitable for use but subsequently additional work by the developers of this feature have revealed some problems that need to be addressed. In order to allow this to be done without having to support the initial ABI add Kconfig to disable the build and also add some #error statements to the UAPI header so users can't use them.
-
Julian Scheel authored
The input terminal parser recurses into the referenced clock entity to verify it is existant and thus the terminal descriptor is valid. The actual property values of the term instance which is initially parsed must not be overriden by the recursion. For this to work the term properties have to be assigned after recursing into the referenced clock entity descriptors. Signed-off-by:
Julian Scheel <julian@jusst.de> Acked-by:
Daniel Mack <daniel@zonque.org> Signed-off-by:
-
Rick Sherman authored
Tested with W541 and Ultra Dock 170w Signed-off-by:
Rick Sherman <rick@shermdog.com> Signed-off-by:
-
Takashi Iwai authored
The fix for deadlock in PM in commit [1ee23fe0: ALSA: usb-audio: Fix deadlocks at resuming] introduced a new check of in_pm flag. However, the brainless patch author evaluated it in a wrong way (logical AND instead of logical OR), thus usb_autopm_get_interface() is wrongly called at probing, leading to unbalance of runtime PM refcount. This patch fixes it by correcting the logic. Reported-by:
Hans Yang <hansy@nvidia.com> Fixes: 1ee23fe0 ('ALSA: usb-audio: Fix deadlocks at resuming') Cc: <stable@vger.kernel.org> [v3.15+] Signed-off-by:
-
- 18 Aug, 2015 2 commits
-
-
Mark Brown authored
Since the topology API is still in sufficient flux for changes to be identified disable the use of the userspace ABI by adding #error statements to the code, ensuring that nobody relies on the headers as currently defined. It is expected that this change will be reverted for v4.3. Signed-off-by:Mark Brown <broonie@kernel.org>
-
Mark Brown authored
Allow the topology code to be compiled out so that users who don't need topology don't need to havve the code compiled in, saving them some memory. Some more configuration could be added to remove some of the hooks into the core data structures but that is probably best done with some refactoring to use functions to do the updates of the data structures rather than ifdefing in the code as we'd need to do at the minute. Suggested-by:
-
- 17 Aug, 2015 4 commits
-
-
Takashi Iwai authored
Similar like the previous fix to hda_proc.c, adding const prefix will save our world (a little bit). Signed-off-by: -
Takashi Iwai authored
The power states in a proc file are printed in a racy manner on a single static string buffer. Fix it by calling snd_iprintf() directly for each state instead of processing on a temporary buffer. Signed-off-by: -
Takashi Iwai authored
Many arrays in hda_proc.c are string arrays that should be covered by const prefix for increasing the safety and reducing the size. Signed-off-by: -
Takashi Iwai authored
A few helper functions to convert the pin information to strings have been exported with assumption that they were used by other drivers. But they are referred only in the proc interface in the end. Let's make them local so that we can get rid of a few exports. Signed-off-by:
-
