- 15 Apr, 2013 7 commits
-
-
Seung-Woo Kim authored
The length of mmap() can be bigger than length of vb2 buffer, so it should be checked. Signed-off-by:
Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Antti Palosaari authored
Driver author has disappeared, even mails are bouncing back. I will keep care with that as I have done for a while. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
I have the hardware and I have already made almost all changes what are needed during the recent few years, so lets mark it as maintained. Signed-off-by:
-
Wei Yongjun authored
Since rc_unregister_device() frees its argument, the subsequently call to rc_free_device() on the same variable will cause a double free bug. Fix by set argument to NULL, thus when fall through to rc_free_device(), nothing will be done there. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Wei Yongjun authored
Since rc_unregister_device() frees its argument, the subsequently call to rc_free_device() on the same variable will cause a double free bug. Fix by set argument to NULL, thus when fall through to rc_free_device(), nothing will be done there. Signed-off-by:
-
Wei Yongjun authored
Since rc_unregister_device() frees its argument, the subsequently call to rc_free_device() on the same variable will cause a double free bug. Fix by set argument to NULL, thus when fall through to rc_free_device(), nothing will be done there. Signed-off-by:
-
Wei Yongjun authored
Since rc_unregister_device() frees its argument, the subsequently call to rc_free_device() on the same variable will cause a double free bug. Fix by set argument to NULL, thus when fall through to rc_free_device(), nothing will be done there. Signed-off-by:
-
- 14 Apr, 2013 33 commits
-
-
Laurent Pinchart authored
The driver isn't actively maintained anymore, update its status. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Guennadi Liakhovetski authored
The default format conversion table mbus_fmt[] in soc_mediabus.c lists "natural" conversions between media-bus and fourcc pixel formats, that are achieved by storing data from the bus in RAM exactly as it arrives, only possibly padding missing high or low bits. Such data acquisition mode cannot change data endianness, therefore two locations with opposite endianness are erroneous. This change might affest the omap1-camera driver, existing configurations should be verified. Signed-off-by:
-
Lad, Prabhakar authored
This patch replaces V4L2_STD_525_60/625_50 with V4L2_STD_NTSC/PAL respectively as this are the proper video standards. Signed-off-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Reported-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Lad, Prabhakar authored
add support for V4L2 video display to DM355 EVM. Support for SD modes is provided, along with Composite output Signed-off-by:
-
Lad, Prabhakar authored
Create platform devices for various video modules like venc,osd, vpbe and v4l2 driver for dm355. Signed-off-by:
-
Lad, Prabhakar authored
add support for V4L2 video display to DM365 EVM. Support for SD and ED modes is provided, along with Composite and Component outputs. Signed-off-by:
-
Lad, Prabhakar authored
Create platform devices for various video modules like venc,osd, vpbe and v4l2 driver for dm365. Signed-off-by:
-
Lad, Prabhakar authored
this patch removes unnecessary header file inclusions and fixes the typo's. Signed-off-by:
-
Lad, Prabhakar authored
The vpss clocks were enabled by calling a exported function from a driver in a machine code. calling driver code from platform code is incorrect way. This patch fixes this issue and calls the function from driver code itself. Signed-off-by:
-
Lad, Prabhakar authored
By default the VPSS clocks were enabled in capture driver for davinci family which creates duplicates for dm355/dm365/dm644x. This patch adds support to enable the VPSS clocks in VPSS driver, which avoids duplication of code and also adding clock aliases. This patch uses PM runtime API to enable/disable clock, instead of DaVinci clock framework. con_ids for master and slave clocks of vpss is added in pm_domain. This patch cleanups the VPSS clock enabling in the capture driver, and also removes the clock alias in machine file. Along side adds a vpss slave clock for DM365 as mentioned by Sekhar (https://patchwork.kernel.org/patch/1221261/). The Suspend/Resume in dm644x_ccdc.c which enabled/disabled the VPSS clock is now implemented as part of the VPSS driver. Signed-off-by:
-
Lad, Prabhakar authored
Add pm_runtime support to the TI Davinci VPIF driver. Signed-off-by:
-
Sekhar Nori authored
drivers/media/platform/davinci/Kconfig uses selects where it should be using 'depends on'. This results in warnings of the following sort when doing randconfig builds. warning: (VIDEO_DM6446_CCDC && VIDEO_DM355_CCDC && VIDEO_ISIF && VIDEO_DAVINCI_VPBE_DISPLAY) selects VIDEO_VPSS_SYSTEM which has unmet direct dependencies (MEDIA_SUPPORT && V4L_PLATFORM_DRIVERS && ARCH_DAVINCI) The VPIF kconfigs had a strange 'select' and 'depends on' cross linkage which have been fixed as well by removing unneeded VIDEO_DAVINCI_VPIF config symbol. Similarly, remove the unnecessary VIDEO_VPSS_SYSTEM and VIDEO_VPFE_CAPTURE. They don't select any independent functionality and were being used to manage code dependencies which can be handled using makefile. Selecting video modules is now dependent on all ARCH_DAVINCI instead of specific EVMs and SoCs earlier. This should help build coverage. Remove unnecessary 'default y' for some config symbols. While at it, fix the Kconfig help text to make it more readable and fix names of modules created during module build. Rename VIDEO_ISIF to VIDEO_DM365_ISIF as per suggestion from Prabhakar. This patch has only been build tested; I have tried to not break any existing assumptions. I do not have the setup to test video, so any test reports welcome. Reported-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Vladimir Barinov authored
When the input signal is not detected querystd() method should return V4L2_STD_UNKNOWN instead of previously latched analog video standard. Signed-off-by:
Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Frank Schaefer authored
Chip id 18 is used by the em2710 and em2820. The current code assumes that if the device is a camera, the chip is an em2710 and an em2820 otherwise. But it turned out that the em2820 is also used in camera devices. "Silvercrest 1.3 MPix" webcams for example are available with both chips. Fortunately both variants are using different generic USD IDs which give us a hint about the used chip. Signed-off-by:
Frank Schäfer <fschaefer.oss@googlemail.com> Signed-off-by:
-
Frank Schaefer authored
The snapshot button support is currently broken, because module em28xx-rc is loaded only if the device has remote control support. Fix it by also loading this module if the device has a snapshot button. Signed-off-by:
-
Randy Dunlap authored
Fix randconfig error when USB is not enabled: ERROR: "usb_control_msg" [drivers/media/common/cypress_firmware.ko] undefined! Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
-
Antti Palosaari authored
It is moved to the different location and renamed. Signed-off-by:
-
Hans Verkuil authored
Use the monotonic clock and set the timestamp_type that vb2 expects. Signed-off-by:
-
Hans Verkuil authored
A mutex_unlock was missing in the 'success' path of the open() call, and also at one error path in the same function. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Both MythTV and gstreamer expect that they can set/get/query/enumerate the standards, even if the input is the component input for which standards really do not apply. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
This is the latest firmware version and - it seems - the most reliable. Signed-off-by:
-
Hans Verkuil authored
Video nodes can be used at once after registration, so make sure the full initialization is done before registering them. Signed-off-by:
-
Hans Verkuil authored
- return EBUSY instead of EAGAIN. - add missing break. - remove unnecessary buf type check (done by the core). Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
This prepares the driver for priority and control event handling. This patch also checks for correct streaming ownership and it makes a small improvement to the encoder_cmd ioctls: always zero 'flags' and drop the memset of 'raw' as that is already done by the v4l2 core. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
These formats are supported by the HDPVR, but they were missing in the list. Note that these formats are different from the common PAL/NTSC/SECAM formats since all color channels are transmitted separately and so there is no PAL or NTSC or SECAM color encoding involved. Signed-off-by:
-
Hans Verkuil authored
This was set to 1 << 0 which is the same as V4L2_DV_FL_REDUCED_BLANKING. It should be 1 << 3 instead. Luckily interlaced formats are rarely used, which is why this bug wasn't seen until now. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Tested-by:
-
