- 27 Oct, 2023 24 commits
-
-
Dmitry Safonov authored
Now when the new request socket is created from the listening socket, it's recorded what MKT was used by the peer. tcp_rsk_used_ao() is a new helper for checking if TCP-AO option was used to create the request socket. tcp_ao_copy_all_matching() will copy all keys that match the peer on the request socket, as well as preparing them for the usage (creating traffic keys). Co-developed-by:
Francesco Ruggeri <fruggeri@arista.com> Signed-off-by:
Salam Noureddine <noureddine@arista.com> Signed-off-by:
Dmitry Safonov <dima@arista.com> Acked-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dmitry Safonov authored
Add support for sockets in time-wait state. ao_info as well as all keys are inherited on transition to time-wait socket. The lifetime of ao_info is now protected by ref counter, so that tcp_ao_destroy_sock() will destruct it only when the last user is gone. Co-developed-by:
-
Dmitry Safonov authored
Wire up sending resets to TCP-AO hashing. Co-developed-by:
-
Dmitry Safonov authored
Introduce a helper that: (1) shares the common code with TCP-MD5 header options parsing (2) looks for hash signature only once for both TCP-MD5 and TCP-AO (3) fails with -EEXIST if any TCP sign option is present twice, see RFC5925 (2.2): ">> A single TCP segment MUST NOT have more than one TCP-AO in its options sequence. When multiple TCP-AOs appear, TCP MUST discard the segment." Co-developed-by: -
Dmitry Safonov authored
Using precalculated traffic keys, sign TCP segments as prescribed by RFC5925. Per RFC, TCP header options are included in sign calculation: "The TCP header, by default including options, and where the TCP checksum and TCP-AO MAC fields are set to zero, all in network- byte order." (5.1.3) tcp_ao_hash_header() has exclude_options parameter to optionally exclude TCP header from hash calculation, as described in RFC5925 (9.1), this is needed for interaction with middleboxes that may change "some TCP options". This is wired up to AO key flags and setsockopt() later. Similarly to TCP-MD5 hash TCP segment fragments. From this moment a user can start sending TCP-AO signed segments with one of crypto ahash algorithms from supported by Linux kernel. It can have a user-specified MAC length, to either save TCP option header space or provide higher protection using a longer signature. The inbound segments are not yet verified, TCP-AO option is ignored and they are accepted. Co-developed-by:
-
Dmitry Safonov authored
Add traffic key calculation the way it's described in RFC5926. Wire it up to tcp_finish_connect() and cache the new keys straight away on already established TCP connections. Co-developed-by:
-
Dmitry Safonov authored
Be as conservative as possible: if there is TCP-MD5 key for a given peer regardless of L3 interface - don't allow setting TCP-AO key for the same peer. According to RFC5925, TCP-AO is supposed to replace TCP-MD5 and there can't be any switch between both on any connected tuple. Later it can be relaxed, if there's a use, but in the beginning restrict any intersection. Note: it's still should be possible to set both TCP-MD5 and TCP-AO keys on a listening socket for *different* peers. Co-developed-by:
-
Dmitry Safonov authored
Add 3 setsockopt()s: 1. TCP_AO_ADD_KEY to add a new Master Key Tuple (MKT) on a socket 2. TCP_AO_DEL_KEY to delete present MKT from a socket 3. TCP_AO_INFO to change flags, Current_key/RNext_key on a TCP-AO sk Userspace has to introduce keys on every socket it wants to use TCP-AO option on, similarly to TCP_MD5SIG/TCP_MD5SIG_EXT. RFC5925 prohibits definition of MKTs that would match the same peer, so do sanity checks on the data provided by userspace. Be as conservative as possible, including refusal of defining MKT on an established connection with no AO, removing the key in-use and etc. (1) and (2) are to be used by userspace key manager to add/remove keys. (3) main purpose is to set RNext_key, which (as prescribed by RFC5925) is the KeyID that will be requested in TCP-AO header from the peer to sign their segments with. At this moment the life of ao_info ends in tcp_v4_destroy_sock(). Co-developed-by:
-
Dmitry Safonov authored
Introduce new kernel config option and common structures as well as helpers to be used by TCP-AO code. Co-developed-by:
-
Dmitry Safonov authored
TCP-AO, similarly to TCP-MD5, needs to allocate tfms on a slow-path, which is setsockopt() and use crypto ahash requests on fast paths, which are RX/TX softirqs. Also, it needs a temporary/scratch buffer for preparing the hash. Rework tcp_md5sig_pool in order to support other hashing algorithms than MD5. It will make it possible to share pre-allocated crypto_ahash descriptors and scratch area between all TCP hash users. Internally tcp_sigpool calls crypto_clone_ahash() API over pre-allocated crypto ahash tfm. Kudos to Herbert, who provided this new crypto API. I was a little concerned over GFP_ATOMIC allocations of ahash and crypto_request in RX/TX (see tcp_sigpool_start()), so I benchmarked both "backends" with different algorithms, using patched version of iperf3[2]. On my laptop with i7-7600U @ 2.80GHz: clone-tfm per-CPU-requests TCP-MD5 2.25 Gbits/sec 2.30 Gbits/sec TCP-AO(hmac(sha1)) 2.53 Gbits/sec 2.54 Gbits/sec TCP-AO(hmac(sha512)) 1.67 Gbits/sec 1.64 Gbits/sec TCP-AO(hmac(sha384)) 1.77 Gbits/sec 1.80 Gbits/sec TCP-AO(hmac(sha224)) 1.29 Gbits/sec 1.30 Gbits/sec TCP-AO(hmac(sha3-512)) 481 Mbits/sec 480 Mbits/sec TCP-AO(hmac(md5)) 2.07 Gbits/sec 2.12 Gbits/sec TCP-AO(hmac(rmd160)) 1.01 Gbits/sec 995 Mbits/sec TCP-AO(cmac(aes128)) [not supporetd yet] 2.11 Gbits/sec So, it seems that my concerns don't have strong grounds and per-CPU crypto_request allocation can be dropped/removed from tcp_sigpool once ciphers get crypto_clone_ahash() support. [1]: https://lore.kernel.org/all/ZDefxOq6Ax0JeTRH@gondor.apana.org.au/T/#u [2]: https://github.com/0x7f454c46/iperf/tree/tcp-md5-aoSigned-off-by:Steen Hegelund <Steen.Hegelund@microchip.com> Acked-by:
-
Bagas Sanjaya authored
Messages submitted to the ML bounce (address not found error). In fact, the ML was mistagged as person maintainer instead of mailing list. Remove the ML to keep Cc: lists a bit shorter and not to spam everyone's inbox with postmaster notifications. Signed-off-by:
Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20231025130332.67995-2-bagasdotme@gmail.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Jacob Keller says: ==================== Intel Wired LAN Driver Updates for 2023-10-25 (ice) This series extends the ice driver with basic support for the E830 device line. It does not include support for all device features, but enables basic functionality to load and pass traffic. Alice adds the 200G speed and PHY types supported by E830 hardware. Dan extends the DDP package logic to support the E830 package segment. Paul adds the basic registers and macros used by E830 hardware, and adds support for handling variable length link status information from firmware. Pawel removes some redundant zeroing of the PCI IDs list, and extends the list to include the E830 device IDs. ==================== Link: https://lore.kernel.org/r/20231025214157.1222758-1-jacob.e.keller@intel.comSigned-off-by:
-
Pawel Chmielewski authored
As the previous patches provide support for E830 hardware, add E830 specific IDs to the PCI device ID table, so these devices can now be probed by the kernel. Reviewed-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
Pawel Chmielewski <pawel.chmielewski@intel.com> Reviewed-by:
Paul Greenwalt <paul.greenwalt@intel.com> Tested-by:
Tony Brelinski <tony.brelinski@intel.com> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20231025214157.1222758-7-jacob.e.keller@intel.comSigned-off-by:
-
Pawel Chmielewski authored
Remove zeroing of the fields, as all the fields are in fact initialized with zeros automatically Reviewed-by:
-
Dan Nowlin authored
Add support for E830 DDP package segment. For the E830 package, signature buffers will not be included inline in the configuration buffers. Instead, the signature buffers will be located in a signature segment. Reviewed-by:
Dan Nowlin <dan.nowlin@intel.com> Co-developed-by:
-
Paul Greenwalt authored
The Get Link Status data length can vary with different versions of ice_aqc_get_link_status_data. Add ice_get_link_status_datalen() to return datalen for the specific ice_aqc_get_link_status_data version. Add new link partner fields to ice_aqc_get_link_status_data; PHY type, FEC, and flow control. Reviewed-by:
-
Alice Michael authored
Add the support for 200G phy speeds and the mapping for their advertisement in link. Add the new PHY type bits for AQ command, as needed for 200G E830 controllers. Signed-off-by:
Alice Michael <alice.michael@intel.com> Co-developed-by:
-
Paul Greenwalt authored
E830 is the 200G NIC family which uses the ice driver. Add specific E830 registers. Embed macros to use proper register based on (hw)->mac_type & name those macros to [ORIGINAL]_BY_MAC(hw). Registers only available on one of the macs will need to be explicitly referred to as E800_NAME instead of just NAME. PTP is not yet supported. Co-developed-by:
Milena Olech <milena.olech@intel.com> Signed-off-by:
Scott Taylor <scott.w.taylor@intel.com> Signed-off-by:
-
Jakub Kicinski authored
Merge tag 'wireless-next-2023-10-26' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.7 The third, and most likely the last, features pull request for v6.7. Fixes all over and only few small new features. Major changes: iwlwifi - more Multi-Link Operation (MLO) work ath12k - QCN9274: mesh support ath11k - firmware-2.bin container file format support * tag 'wireless-next-2023-10-26' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (155 commits) wifi: ray_cs: Remove unnecessary (void*) conversions Revert "wifi: ath11k: call ath11k_mac_fils_discovery() without condition" wifi: ath12k: Introduce and use ath12k_sta_to_arsta() wifi: ath12k: fix htt mlo-offset event locking wifi: ath12k: fix dfs-radar and temperature event locking wifi: ath11k: fix gtk offload status event locking wifi: ath11k: fix htt pktlog locking wifi: ath11k: fix dfs radar event locking wifi: ath11k: fix temperature event locking wifi: ath12k: rename the sc naming convention to ab wifi: ath12k: rename the wmi_sc naming convention to wmi_ab wifi: ath11k: add firmware-2.bin support wifi: ath11k: qmi: refactor ath11k_qmi_m3_load() wifi: rtw89: cleanup firmware elements parsing wifi: rt2x00: rework MT7620 PA/LNA RF calibration wifi: rt2x00: rework MT7620 channel config function wifi: rt2x00: improve MT7620 register initialization MAINTAINERS: wifi: rt2x00: drop Helmut Schaa wifi: wlcore: main: replace deprecated strncpy with strscpy wifi: wlcore: boot: replace deprecated strncpy with strscpy ... ==================== Link: https://lore.kernel.org/r/20231026090411.B2426C433CB@smtp.kernel.orgSigned-off-by:
-
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2023-10-26 We've added 51 non-merge commits during the last 10 day(s) which contain a total of 75 files changed, 5037 insertions(+), 200 deletions(-). The main changes are: 1) Add open-coded task, css_task and css iterator support. One of the use cases is customizable OOM victim selection via BPF, from Chuyi Zhou. 2) Fix BPF verifier's iterator convergence logic to use exact states comparison for convergence checks, from Eduard Zingerman, Andrii Nakryiko and Alexei Starovoitov. 3) Add BPF programmable net device where bpf_mprog defines the logic of its xmit routine. It can operate in L3 and L2 mode, from Daniel Borkmann and Nikolay Aleksandrov. 4) Batch of fixes for BPF per-CPU kptr and re-enable unit_size checking for global per-CPU allocator, from Hou Tao. 5) Fix libbpf which eagerly assumed that SHT_GNU_verdef ELF section was going to be present whenever a binary has SHT_GNU_versym section, from Andrii Nakryiko. 6) Fix BPF ringbuf correctness to fold smp_mb__before_atomic() into atomic_set_release(), from Paul E. McKenney. 7) Add a warning if NAPI callback missed xdp_do_flush() under CONFIG_DEBUG_NET which helps checking if drivers were missing the former, from Sebastian Andrzej Siewior. 8) Fix missed RCU read-lock in bpf_task_under_cgroup() which was throwing a warning under sleepable programs, from Yafang Shao. 9) Avoid unnecessary -EBUSY from htab_lock_bucket by disabling IRQ before checking map_locked, from Song Liu. 10) Make BPF CI linked_list failure test more robust, from Kumar Kartikeya Dwivedi. 11) Enable samples/bpf to be built as PIE in Fedora, from Viktor Malik. 12) Fix xsk starving when multiple xsk sockets were associated with a single xsk_buff_pool, from Albert Huang. 13) Clarify the signed modulo implementation for the BPF ISA standardization document that it uses truncated division, from Dave Thaler. 14) Improve BPF verifier's JEQ/JNE branch taken logic to also consider signed bounds knowledge, from Andrii Nakryiko. 15) Add an option to XDP selftests to use multi-buffer AF_XDP xdp_hw_metadata and mark used XDP programs as capable to use frags, from Larysa Zaremba. 16) Fix bpftool's BTF dumper wrt printing a pointer value and another one to fix struct_ops dump in an array, from Manu Bretelle. * tag 'for-netdev' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (51 commits) netkit: Remove explicit active/peer ptr initialization selftests/bpf: Fix selftests broken by mitigations=off samples/bpf: Allow building with custom bpftool samples/bpf: Fix passing LDFLAGS to libbpf samples/bpf: Allow building with custom CFLAGS/LDFLAGS bpf: Add more WARN_ON_ONCE checks for mismatched alloc and free selftests/bpf: Add selftests for netkit selftests/bpf: Add netlink helper library bpftool: Extend net dump with netkit progs bpftool: Implement link show support for netkit libbpf: Add link-based API for netkit tools: Sync if_link uapi header netkit, bpf: Add bpf programmable net device bpf: Improve JEQ/JNE branch taken logic bpf: Fold smp_mb__before_atomic() into atomic_set_release() bpf: Fix unnecessary -EBUSY from htab_lock_bucket xsk: Avoid starving the xsk further down the list bpf: print full verifier states on infinite loop detection selftests/bpf: test if state loops are detected in a tricky case bpf: correct loop detection for iterators convergence ... ==================== Link: https://lore.kernel.org/r/20231026150509.2824-1-daniel@iogearbox.netSigned-off-by: -
Alexey Makhalov authored
Deep has decided to transfer the maintainership of the VMware virtual PTP clock driver (ptp_vmw) to Jeff. Update the MAINTAINERS file to reflect this change. Signed-off-by:
Alexey Makhalov <amakhalov@vmware.com> Acked-by:
Deep Shah <sdeep@vmware.com> Acked-by:
Jeff Sipek <jsipek@vmware.com> Link: https://lore.kernel.org/r/20231025231931.76842-1-amakhalov@vmware.comSigned-off-by:
-
Michael Chan authored
The recent firmware interface change has added 2 counters in struct rx_port_stats_ext. This caused 2 stray ethtool counters to be displayed. Since new counters are added from time to time, fix it so that the ethtool logic will only display up to the maximum known counters. These 2 counters are not used by production firmware yet. Fixes: 754fbf60 ("bnxt_en: Update firmware interface to 1.10.2.171") Reviewed-by:
Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/20231026013231.53271-1-michael.chan@broadcom.comSigned-off-by:
-
Jakub Kicinski authored
Davide reports that we look for the attr-cnt-name in the wrong object. We try to read it from the family, but the schema only allows for it to exist at attr-set level. Reported-by:
Davide Caratti <dcaratti@redhat.com> Link: https://lore.kernel.org/all/CAKa-r6vCj+gPEUKpv7AsXqM77N6pB0evuh7myHq=585RA3oD5g@mail.gmail.com/Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20231025182739.184706-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Page pool code is compiled conditionally, but the operations are part of the shared netlink family. We can handle this by reporting empty list of pools or -EOPNOTSUPP / -ENOSYS but the cleanest way seems to be removing the ops completely at compilation time. That way user can see that the page pool ops are not present using genetlink introspection. Same way they'd check if the kernel is "new enough" to support the ops. Extend the specs with the ability to specify the config condition under which op (and its policies, etc.) should be hidden. Reviewed-by:
-
- 26 Oct, 2023 16 commits
-
-
Jakub Kicinski authored
struct nla_policy is usually constant itself, but unless we make the ranges inside constant we won't be able to make range structs const. The ranges are not modified by the core. Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Reviewed-by:
Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by:
-
Przemek Kitszel authored
Avoid use of uninitialized state variable. In case of mlx5e_tx_reporter_build_diagnose_output_sq_common() it's better to still collect other data than bail out entirely. Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/netdev/8bd30131-c9f2-4075-a575-7fa2793a1760@moroto.mountain Fixes: d17f98bf ("net/mlx5: devlink health: use retained error fmsg API") Signed-off-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by:
Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://lore.kernel.org/r/20231025145050.36114-1-przemyslaw.kitszel@intel.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Cross-merge networking fixes after downstream PR. Conflicts: net/mac80211/rx.c 91535613 ("wifi: mac80211: don't drop all unprotected public action frames") 6c02fab7 ("wifi: mac80211: split ieee80211_drop_unencrypted_mgmt() return value") Adjacent changes: drivers/net/ethernet/apm/xgene/xgene_enet_main.c 61471264 ("net: ethernet: apm: Convert to platform remove callback returning void") d2ca43f3 ("net: xgene: Fix unused xgene_enet_of_match warning for !CONFIG_OF") net/vmw_vsock/virtio_transport.c 64c99d2d ("vsock/virtio: support to send non-linear skb") 53b08c49 ("vsock/virtio: initialize the_virtio_vsock before using VQs") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from WiFi and netfilter. Most regressions addressed here come from quite old versions, with the exceptions of the iavf one and the WiFi fixes. No known outstanding reports or investigation. Fixes to fixes: - eth: iavf: in iavf_down, disable queues when removing the driver Previous releases - regressions: - sched: act_ct: additional checks for outdated flows - tcp: do not leave an empty skb in write queue - tcp: fix wrong RTO timeout when received SACK reneging - wifi: cfg80211: pass correct pointer to rdev_inform_bss() - eth: i40e: sync next_to_clean and next_to_process for programming status desc - eth: iavf: initialize waitqueues before starting watchdog_task Previous releases - always broken: - eth: r8169: fix data-races - eth: igb: fix potential memory leak in igb_add_ethtool_nfc_entry - eth: r8152: avoid writing garbage to the adapter's registers - eth: gtp: fix fragmentation needed check with gso" * tag 'net-6.6-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (43 commits) iavf: in iavf_down, disable queues when removing the driver vsock/virtio: initialize the_virtio_vsock before using VQs net: ipv6: fix typo in comments net: ipv4: fix typo in comments net/sched: act_ct: additional checks for outdated flows netfilter: flowtable: GC pushes back packets to classic path i40e: Fix wrong check for I40E_TXR_FLAGS_WB_ON_ITR gtp: fix fragmentation needed check with gso gtp: uapi: fix GTPA_MAX Fix NULL pointer dereference in cn_filter() sfc: cleanup and reduce netlink error messages net/handshake: fix file ref count in handshake_nl_accept_doit() wifi: mac80211: don't drop all unprotected public action frames wifi: cfg80211: fix assoc response warning on failed links wifi: cfg80211: pass correct pointer to rdev_inform_bss() isdn: mISDN: hfcsusb: Spelling fix in comment tcp: fix wrong RTO timeout when received SACK reneging r8152: Block future register access if register access fails r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE r8152: Check for unplug in r8153b_ups_en() / r8153c_ups_en() ... -
Nikolay Aleksandrov authored
Remove the explicit NULLing of active/peer pointers and rely on the implicit one done at net device allocation. Suggested-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
-
Yafang Shao authored
When we configure the kernel command line with 'mitigations=off' and set the sysctl knob 'kernel.unprivileged_bpf_disabled' to 0, the commit bc5bc309 ("bpf: Inherit system settings for CPU security mitigations") causes issues in the execution of `test_progs -t verifier`. This is because 'mitigations=off' bypasses Spectre v1 and Spectre v4 protections. Currently, when a program requests to run in unprivileged mode (kernel.unprivileged_bpf_disabled = 0), the BPF verifier may prevent it from running due to the following conditions not being enabled: - bypass_spec_v1 - bypass_spec_v4 - allow_ptr_leaks - allow_uninit_stack While 'mitigations=off' enables the first two conditions, it does not enable the latter two. As a result, some test cases in 'test_progs -t verifier' that were expected to fail to run may run successfully, while others still fail but with different error messages. This makes it challenging to address them comprehensively. Moreover, in the future, we may introduce more fine-grained control over CPU mitigations, such as enabling only bypass_spec_v1 or bypass_spec_v4. Given the complexity of the situation, rather than fixing each broken test case individually, it's preferable to skip them when 'mitigations=off' is in effect and introduce specific test cases for the new 'mitigations=off' scenario. For instance, we can introduce new BTF declaration tags like '__failure__nospec', '__failure_nospecv1' and '__failure_nospecv4'. In this patch, the approach is to simply skip the broken test cases when 'mitigations=off' is enabled. The result of `test_progs -t verifier` as follows after this commit, Before this commit ================== - without 'mitigations=off' - kernel.unprivileged_bpf_disabled = 2 Summary: 74/948 PASSED, 388 SKIPPED, 0 FAILED - kernel.unprivileged_bpf_disabled = 0 Summary: 74/1336 PASSED, 0 SKIPPED, 0 FAILED <<<< - with 'mitigations=off' - kernel.unprivileged_bpf_disabled = 2 Summary: 74/948 PASSED, 388 SKIPPED, 0 FAILED - kernel.unprivileged_bpf_disabled = 0 Summary: 63/1276 PASSED, 0 SKIPPED, 11 FAILED <<<< 11 FAILED After this commit ================= - without 'mitigations=off' - kernel.unprivileged_bpf_disabled = 2 Summary: 74/948 PASSED, 388 SKIPPED, 0 FAILED - kernel.unprivileged_bpf_disabled = 0 Summary: 74/1336 PASSED, 0 SKIPPED, 0 FAILED <<<< - with this patch, with 'mitigations=off' - kernel.unprivileged_bpf_disabled = 2 Summary: 74/948 PASSED, 388 SKIPPED, 0 FAILED - kernel.unprivileged_bpf_disabled = 0 Summary: 74/948 PASSED, 388 SKIPPED, 0 FAILED <<<< SKIPPED Fixes: bc5bc309 ("bpf: Inherit system settings for CPU security mitigations") Reported-by:
Alexei Starovoitov <alexei.starovoitov@gmail.com> Signed-off-by:
Yafang Shao <laoar.shao@gmail.com> Signed-off-by:
Yonghong Song <yonghong.song@linux.dev> Closes: https://lore.kernel.org/bpf/CAADnVQKUBJqg+hHtbLeeC2jhoJAWqnmRAzXW3hmUCNSV9kx4sQ@mail.gmail.com Link: https://lore.kernel.org/bpf/20231025031144.5508-1-laoar.shao@gmail.com
-
Viktor Malik authored
samples/bpf build its own bpftool boostrap to generate vmlinux.h as well as some BPF objects. This is a redundant step if bpftool has been already built, so update samples/bpf/Makefile such that it accepts a path to bpftool passed via the BPFTOOL variable. The approach is practically the same as tools/testing/selftests/bpf/Makefile uses. Signed-off-by:
Viktor Malik <vmalik@redhat.com> Signed-off-by:
-
Viktor Malik authored
samples/bpf/Makefile passes LDFLAGS=$(TPROGS_LDFLAGS) to libbpf build without surrounding quotes, which may cause compilation errors when passing custom TPROGS_USER_LDFLAGS. For example: $ make -C samples/bpf/ TPROGS_USER_LDFLAGS="-Wl,--as-needed -specs=/usr/lib/gcc/x86_64-redhat-linux/13/libsanitizer.spec" make: Entering directory './samples/bpf' make -C ../../ M=./samples/bpf BPF_SAMPLES_PATH=./samples/bpf make[1]: Entering directory '.' make -C ./samples/bpf/../../tools/lib/bpf RM='rm -rf' EXTRA_CFLAGS="-Wall -O2 -Wmissing-prototypes -Wstrict-prototypes -I./usr/include -I./tools/testing/selftests/bpf/ -I./samples/bpf/libbpf/include -I./tools/include -I./tools/perf -I./tools/lib -DHAVE_ATTR_TEST=0" \ LDFLAGS=-Wl,--as-needed -specs=/usr/lib/gcc/x86_64-redhat-linux/13/libsanitizer.spec srctree=./samples/bpf/../../ \ O= OUTPUT=./samples/bpf/libbpf/ DESTDIR=./samples/bpf/libbpf prefix= \ ./samples/bpf/libbpf/libbpf.a install_headers make: invalid option -- 'c' make: invalid option -- '=' make: invalid option -- '/' make: invalid option -- 'u' make: invalid option -- '/' [...] Fix the error by properly quoting $(TPROGS_LDFLAGS). Suggested-by:Donald Zickus <dzickus@redhat.com> Signed-off-by:
-
Viktor Malik authored
Currently, it is not possible to specify custom flags when building samples/bpf. The flags are defined in TPROGS_CFLAGS/TPROGS_LDFLAGS variables, however, when trying to override those from the make command, compilation fails. For example, when trying to build with PIE: $ make -C samples/bpf TPROGS_CFLAGS="-fpie" TPROGS_LDFLAGS="-pie" This is because samples/bpf/Makefile updates these variables, especially appends include paths to TPROGS_CFLAGS and these updates are overridden by setting the variables from the make command. This patch introduces variables TPROGS_USER_CFLAGS/TPROGS_USER_LDFLAGS for this purpose, which can be set from the make command and their values are propagated to TPROGS_CFLAGS/TPROGS_LDFLAGS. Signed-off-by: -
Beniamino Galvani authored
The source and destination ports should be taken into account when determining the route destination; they can affect the result, for example in case there are routing rules defined. Signed-off-by:
Beniamino Galvani <b.galvani@gmail.com> Reviewed-by:
Paolo Abeni <pabeni@redhat.com>
-
Hou Tao authored
There are two possible mismatched alloc and free cases in BPF memory allocator: 1) allocate from cache X but free by cache Y with a different unit_size 2) allocate from per-cpu cache but free by kmalloc cache or vice versa So add more WARN_ON_ONCE checks in free_bulk() and __free_by_rcu() to spot these mismatched alloc and free early. Signed-off-by:
Hou Tao <houtao1@huawei.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-nextPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next. Mostly nf_tables updates with two patches for connlabel and br_netfilter. 1) Rename function name to perform on-demand GC for rbtree elements, and replace async GC in rbtree by sync GC. Patches from Florian Westphal. 2) Use commit_mutex for NFT_MSG_GETRULE_RESET to ensure that two concurrent threads invoking this command do not underrun stateful objects. Patches from Phil Sutter. 3) Use single hook to deal with IP and ARP packets in br_netfilter. Patch from Florian Westphal. 4) Use atomic_t in netns->connlabel use counter instead of using a spinlock, also patch from Florian. 5) Cleanups for stateful objects infrastructure in nf_tables. Patches from Phil Sutter. 6) Flush path uses opaque set element offered by the iterator, instead of calling pipapo_deactivate() which looks up for it again. 7) Set backend .flush interface always succeeds, make it return void instead. 8) Add struct nft_elem_priv placeholder structure and use it by replacing void * to pass opaque set element representation from backend to frontend which defeats compiler type checks. 9) Shrink memory consumption of set element transactions, by reducing struct nft_trans_elem object size and reducing stack memory usage. 10) Use struct nft_elem_priv also for set backend .insert operation too. 11) Carry reset flag in nft_set_dump_ctx structure, instead of passing it as a function argument, from Phil Sutter. netfilter pull request 23-10-25 * tag 'nf-next-23-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: Carry reset boolean in nft_set_dump_ctx netfilter: nf_tables: set->ops->insert returns opaque set element in case of EEXIST netfilter: nf_tables: shrink memory consumption of set elements netfilter: nf_tables: expose opaque set element as struct nft_elem_priv netfilter: nf_tables: set backend .flush always succeeds netfilter: nft_set_pipapo: no need to call pipapo_deactivate() from flush netfilter: nf_tables: Carry reset boolean in nft_obj_dump_ctx netfilter: nf_tables: nft_obj_filter fits into cb->ctx netfilter: nf_tables: Carry s_idx in nft_obj_dump_ctx netfilter: nf_tables: A better name for nft_obj_filter netfilter: nf_tables: Unconditionally allocate nft_obj_filter netfilter: nf_tables: Drop pointless memset in nf_tables_dump_obj netfilter: conntrack: switch connlabels to atomic_t br_netfilter: use single forward hook for ip and arp netfilter: nf_tables: Add locking for NFT_MSG_GETRULE_RESET requests netfilter: nf_tables: Introduce nf_tables_getrule_single() netfilter: nf_tables: Open-code audit log call in nf_tables_getrule() netfilter: nft_set_rbtree: prefer sync gc to async worker netfilter: nft_set_rbtree: rename gc deactivate+erase function ==================== Link: https://lore.kernel.org/r/20231025212555.132775-1-pablo@netfilter.orgSigned-off-by: -
Jakub Kicinski authored
Merge branch 'net-ipv6-addrconf-ensure-that-temporary-addresses-preferred-lifetimes-are-in-the-valid-range' Alex Henrie says: ==================== net: ipv6/addrconf: ensure that temporary addresses' preferred lifetimes are in the valid range No changes from v2, but there are only four patches now because the first patch has already been applied. https://lore.kernel.org/all/20230829054623.104293-1-alexhenrie24@gmail.com/ ==================== Link: https://lore.kernel.org/r/20231024212312.299370-1-alexhenrie24@gmail.comSigned-off-by:
-
Alex Henrie authored
Signed-off-by:
Alex Henrie <alexhenrie24@gmail.com> Reviewed-by:
-
Alex Henrie authored
Signed-off-by:
-
Alex Henrie authored
If the preferred lifetime was less than the minimum required lifetime, ipv6_create_tempaddr would error out without creating any new address. On my machine and network, this error happened immediately with the preferred lifetime set to 1 second, after a few minutes with the preferred lifetime set to 4 seconds, and not at all with the preferred lifetime set to 5 seconds. During my investigation, I found a Stack Exchange post from another person who seems to have had the same problem: They stopped getting new addresses if they lowered the preferred lifetime below 3 seconds, and they didn't really know why. The preferred lifetime is a preference, not a hard requirement. The kernel does not strictly forbid new connections on a deprecated address, nor does it guarantee that the address will be disposed of the instant its total valid lifetime expires. So rather than disable IPv6 privacy extensions altogether if the minimum required lifetime swells above the preferred lifetime, it is more in keeping with the user's intent to increase the temporary address's lifetime to the minimum necessary for the current network conditions. With these fixes, setting the preferred lifetime to 3 or 4 seconds "just works" because the extra fraction of a second is practically unnoticeable. It's even possible to reduce the time before deprecation to 1 or 2 seconds by also disabling duplicate address detection (setting /proc/sys/net/ipv6/conf/*/dad_transmits to 0). I realize that that is a pretty niche use case, but I know at least one person who would gladly sacrifice performance and convenience to be sure that they are getting the maximum possible level of privacy. Link: https://serverfault.com/a/1031168/310447Signed-off-by:
-
