- 17 Mar, 2023 3 commits
-
-
Yang Li authored
According to commit 7945f929 ("drivers: provide devm_platform_ioremap_resource()"), convert platform_get_resource(), devm_ioremap_resource() to a single call to Use devm_platform_ioremap_resource(), as this is exactly what this function does. Since 'struct platform_device *pdev = to_platform_device(drm->dev)', 'drm->dev' is equivalent to 'pdev->deva'. Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Acked-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
Yang Li authored
According to commit 890cc39a ("drivers: provide devm_platform_get_and_ioremap_resource()"), convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Since 'struct platform_device *pdev = to_platform_device(dev)', 'pdev->dev' is equivalent to 'dev'. Signed-off-by:
-
Lee Jones authored
'bulk' description taken from another in the same file. Fixes the following W=1 kernel build warning(s): drivers/gpu/drm/ttm/ttm_bo.c:98: warning: Function parameter or member 'bulk' not described in 'ttm_bo_set_bulk_move' drivers/gpu/drm/ttm/ttm_bo.c:768: warning: Function parameter or member 'placement' not described in 'ttm_bo_mem_space' drivers/gpu/drm/ttm/ttm_bo.c:768: warning: Excess function parameter 'proposed_placement' description in 'ttm_bo_mem_space' Signed-off-by:
Lee Jones <lee@kernel.org> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
- 16 Mar, 2023 5 commits
-
-
Arthur Grillo authored
This test case uses an arbitrary pitch size, different of the default one, to test if the conversions methods obey. Change the "destination_pitch" colors to change the monochrome expected result from being just zeros, as this makes the arbitrary pitch use unusable. Signed-off-by:
Arthur Grillo <arthurgrillo@riseup.net> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Signed-off-by:
-
Arthur Grillo authored
Extend the existing test cases to test the conversion from XRGB8888 to monochromatic. Signed-off-by:
-
Tom Rix authored
gcc with W=1 reports drivers/gpu/drm/nouveau/nvkm/nvfw/acr.c:49:1: error: no previous prototype for ‘wpr_generic_header_dump’ [-Werror=missing-prototypes] 49 | wpr_generic_header_dump(struct nvkm_subdev *subdev, | ^~~~~~~~~~~~~~~~~~~~~~~ wpr_generic_header_dump is only used in acr.c, so it should be static Signed-off-by:Tom Rix <trix@redhat.com> Reviewed-by:
Karol Herbst <kherbst@redhat.com> Signed-off-by:
-
Tom Rix authored
smatch reports drivers/gpu/drm/nouveau/nvkm/engine/fifo/runl.c:33:18: warning: symbol 'nvkm_engn_cgrp_get' was not declared. Should it be static? nvkm_engn_cgrp_get is only used in runl.c, so it should be static Signed-off-by:
-
Tom Rix authored
gcc with W=1 reports drivers/gpu/drm/nouveau/nvkm/engine/fifo/gf100.c:451:1: error: no previous prototype for ‘gf100_fifo_nonstall_block’ [-Werror=missing-prototypes] 451 | gf100_fifo_nonstall_block(struct nvkm_event *event, int type, int index) | ^~~~~~~~~~~~~~~~~~~~~~~~~ gf100_fifo_nonstall_block is only used in gf100.c, so it should be static Signed-off-by:
-
- 15 Mar, 2023 7 commits
-
-
Zack Rusin authored
The src/dst_pitch got mixed up during the rework of the function, make sure the offset's refer to the correct one. Spotted by clang: Clang warns (or errors with CONFIG_WERROR): drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c:509:29: error: variable 'dst_pitch' is uninitialized when used here [-Werror,-Wuninitialized] src_offset = ddirty->top * dst_pitch + ddirty->left * stdu->cpp; ^~~~~~~~~ drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c:492:26: note: initialize the variable 'dst_pitch' to silence this warning s32 src_pitch, dst_pitch; ^ = 0 1 error generated. Signed-off-by:Zack Rusin <zackr@vmware.com> Reported-by:
Nathan Chancellor <nathan@kernel.org> Reported-by:
Dave Airlie <airlied@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1811 Fixes: 39985eea ("drm/vmwgfx: Abstract placement selection") Reviewed-by:
Martin Krastev <krastevm@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230314211445.1363828-1-zack@kde.org
-
Tvrtko Ursulin authored
Thread group id (aka pid from userspace point of view) is a more interesting thing to show as an owner of a DRM fd, so track and show that instead of the thread id. In the next patch we will make the owner updated post file descriptor handover, which will also be tgid based to avoid ping-pong when multiple threads access the fd. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by:
-
Fabio Estevam authored
Sometimes a GPIO is needed to turn on/off the display. Add support for this usecase by introducing the optional 'enable-gpios' property. Tested on a imx53qsb board. Signed-off-by:
Fabio Estevam <festevam@denx.de> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
-
Fabio Estevam authored
Add an optional 'enable-gpios' property that can be used to turn on/off the display. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
-
Ruihai Zhou authored
The STARRY 2081101QFH032011-53G is a 10.1" WUXGA TFT LCD panel, which fits in nicely with the existing panel-boe-tv101wum-nl6 driver. Hence, we add a new compatible with panel specific config. Signed-off-by:
Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com> Reviewed-by:
-
Ruihai Zhou authored
The STARRY 2081101QFH032011-53G is a 10.1" WUXGA TFT LCD panel, which fits in nicely with the existing panel-boe-tv101wum-nl6 driver. Hence, we add a new compatible with panel specific config. Signed-off-by:
-
Liu Ying authored
Appropriate maintainers should be suggested for changes to the include/drm/drm_bridge.h header file, so add the header file to the 'DRM DRIVERS FOR BRIDGE CHIPS' section. Signed-off-by:
Liu Ying <victor.liu@nxp.com> Acked-by:
Robert Foss <robert.foss@linaro.org> Acked-by:
-
- 14 Mar, 2023 25 commits
-
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Reported-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/dri-devel/CACRpkdawSQsNqKJkSSoSw3HmMHyNXFUywxkdszpTC-a_uZA+tQ@mail.gmail.com/Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Reported-by:
-
Linus Walleij authored
This driver has no way to handle damage, the reason the drm_gem_fb_create_with_dirty() was used was because I had the ambition that the driver would only send out updates to DSI command displays whenever something changed, so as to minimize traffic. It turns out this ambition with command mode isn't working in practice because all the MCDE does is to create a continuous stream of DSI commands and while it is possible to send single frame updates with it, it's not been worthwhile. So we are just setting up continuous updates. Reported-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230313155138.20584-12-tzimmermann@suse.de
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
Anitha Chrisanthus <anitha.chrisanthus@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230313155138.20584-10-tzimmermann@suse.de
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230313155138.20584-6-tzimmermann@suse.de
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Use the fbdev emulation that is optimized for DMA helpers. Avoids possible shadow buffering and makes the code simpler. Signed-off-by:
-
Thomas Zimmermann authored
Implement fbdev emulation that is optimized for drivers that use DMA helpers. The buffers may no tbe moveable, may not require damage handling and have to be located in system memory. This allows fbdev emulation to operate directly on the buffer and mmap it to userspace. Besides those constraints, the emulation works like in the generic code. As an internal DRM client provides, it receives hotplug, restore and unregister events. The DRM client is independent from the fbdev probing, which runs on the first successful hotplug event. The emulation is part of the DMA helper module and not build unless DMA helpers and fbdev emulation has been configured. Tested with vc4. Signed-off-by:
-
