- 05 Oct, 2018 4 commits
-
-
Roy Pledge authored
The QBMan block is memory mapped on SoCs above a 32 bit (4 Gigabyte) boundary so enabling 64 bit DMA addressing is needed for QBMan to be usuable. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
-
Madalin Bucur authored
The existing code sets portal IRQ affinity to CPU 0 in the offline hotplug handler. If CPU 0 is offline this is invalid. Use a different online CPU instead. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
-
Roy Pledge authored
If the CPU to affine the portal interrupt is offline at boot time affine the portal interrupt to another online CPU. If the CPU is later brought online the hotplug handler will correctly adjust the affinity. Moved common code in a function. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
-
Li Yang authored
NXP/FSL SoC driver fixes for v4.19 round 2 - Fix crash of qman_portal by deferring its probe if qman is not probed
-
- 01 Oct, 2018 1 commit
-
-
Laurentiu Tudor authored
Defer probe of qman portals after qman probing. This fixes the crash below, seen on NXP LS1043A SoCs: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000000004] user address but active_mm is swapper Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc1-next-20180622-00200-g986f5c179185 #9 Hardware name: LS1043A RDB Board (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : qman_set_sdest+0x74/0xa0 lr : qman_portal_probe+0x22c/0x470 sp : ffff00000803bbc0 x29: ffff00000803bbc0 x28: 0000000000000000 x27: ffff0000090c1b88 x26: ffff00000927cb68 x25: ffff00000927c000 x24: ffff00000927cb60 x23: 0000000000000000 x22: 0000000000000000 x21: ffff0000090e9000 x20: ffff800073b5c810 x19: ffff800027401298 x18: ffffffffffffffff x17: 0000000000000001 x16: 0000000000000000 x15: ffff0000090e96c8 x14: ffff80002740138a x13: ffff0000090f2000 x12: 0000000000000030 x11: ffff000008f25000 x10: 0000000000000000 x9 : ffff80007bdfd2c0 x8 : 0000000000004000 x7 : ffff80007393cc18 x6 : 0040000000000001 x5 : 0000000000000000 x4 : ffffffffffffffff x3 : 0000000000000004 x2 : ffff00000927c900 x1 : 0000000000000000 x0 : 0000000000000004 Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____)) Call trace: qman_set_sdest+0x74/0xa0 platform_drv_probe+0x50/0xa8 driver_probe_device+0x214/0x2f8 __driver_attach+0xd8/0xe0 bus_for_each_dev+0x68/0xc8 driver_attach+0x20/0x28 bus_add_driver+0x108/0x228 driver_register+0x60/0x110 __platform_driver_register+0x40/0x48 qman_portal_driver_init+0x20/0x84 do_one_initcall+0x58/0x168 kernel_init_freeable+0x184/0x22c kernel_init+0x10/0x108 ret_from_fork+0x10/0x18 Code: f9400443 11001000 927e4800 8b000063 (b9400063) ---[ end trace 4f6d50489ecfb930 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
-
- 27 Sep, 2018 1 commit
-
-
Laurentiu Tudor authored
Add a couple of new APIs to check the probing status of qman and bman: 'int bman_is_probed()' and 'int qman_is_probed()'. They return the following values. * 1 if qman/bman were probed correctly * 0 if qman/bman were not yet probed * -1 if probing of qman/bman failed Drivers that use qman/bman driver services are required to use these APIs before calling any functions exported by qman or bman drivers or otherwise they will crash the kernel. The APIs will be used in the following couple of qbman portal patches and later in the series in the dpaa1 ethernet driver. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
-
- 25 Sep, 2018 4 commits
-
-
Zhao Qiang authored
There is a copy and paste bug so we accidentally use the RX_ shift when we're in TX_ mode. Fixes: bb8b2062 ("fsl/qe: setup clock source for TDM mode") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> (cherry picked from commit 3cb31b634052ed458922e0c8e2b4b093d7fb60b9) Signed-off-by: Olof Johansson <olof@lixom.net>
-
Alexandre Belloni authored
If the qman driver didn't probe, calling qman_alloc_fqid_range, qman_alloc_pool_range or qman_alloc_cgrid_range (as done in dpaa_eth) will pass a NULL pointer to gen_pool_alloc, leading to a NULL pointer dereference. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Reviewed-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com> (cherry picked from commit f72487a2788aa70c3aee1d0ebd5470de9bac953a) Signed-off-by: Olof Johansson <olof@lixom.net>
-
https://github.com/Broadcom/stblinuxOlof Johansson authored
This pull request contains Broadcom ARM-based SoCs Device Tree changes intended for 4.19, please pull the following: - Florian fixes the PPI and SPI interrupts in the BCM63138 (DSL) SoC DTS * tag 'arm-soc/for-4.19/devicetree-fixes' of https://github.com/Broadcom/stblinux: ARM: dts: BCM63xx: Fix incorrect interrupt specifiers Signed-off-by: Olof Johansson <olof@lixom.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linuxOlof Johansson authored
AT91 fixes for 4.19: - fix a NAND issue on sama5d2_ptc_ek (drive strength setting to fix corruption) * tag 'at91-4.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama5d2_ptc_ek: fix nand pinctrl Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 24 Sep, 2018 1 commit
-
-
Florian Fainelli authored
A number of our interrupts were incorrectly specified, fix both the PPI and SPI interrupts to be correct. Fixes: b5762cac ("ARM: bcm63138: add NAND DT support") Fixes: 46d4bca0 ("ARM: BCM63XX: add BCM63138 minimal Device Tree") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-
- 23 Sep, 2018 2 commits
-
-
Olof Johansson authored
Merge tag 'sunxi-fixes-for-4.19-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes Allwinner fixes - round 2 One additional fix regarding HDMI on the R40 SoC. Based on preliminary tests and code dumps for the R40, it was thought that the whole HDMI block was the same on the R40 and A64. Recent tests regarding the A64 showed that this was not the case. The HDMI PHY on the A64 only has one clock parent. How this occurs at the hardware level is unclear, as Allwinner has not given any feedback on this matter. Nevertheless it is clear that the hardware acts differently between the A64 and R40 in such a way that the R40's HDMI PHY is not backward compatible with the A64's. As such we need to drop the fallback compatible string in the R40's device tree. This was added in v4.19-rc1. * tag 'sunxi-fixes-for-4.19-2' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: drop A64 HDMI PHY fallback compatible from R40 DT Signed-off-by: Olof Johansson <olof@lixom.net>
-
Antoine Tenart authored
Free Electrons became Bootlin. Update my email accordingly. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 20 Sep, 2018 1 commit
-
-
Icenowy Zheng authored
The R40 HDMI PHY seems to be different to the A64 one, the A64 one has no input mux, but the R40 one has. Drop the A64 fallback compatible from the HDMI PHY node in R40 DT. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> [wens@csie.org: Fix subject prefix order] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
-
- 12 Sep, 2018 1 commit
-
-
Ludovic Desroches authored
The drive strength has to be set to medium otherwise some data corruption may happen. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
-
- 08 Sep, 2018 1 commit
-
-
Olof Johansson authored
Merge tag 'sunxi-fixes-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes Allwinner fixes for 4.19 Just one fix for H6 mmc on the Pine H64: the mmc bus width was missing from the device tree. This was added in 4.19-rc1. * tag 'sunxi-fixes-for-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: allwinner: dts: h6: fix Pine H64 MMC bus width Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 06 Sep, 2018 3 commits
-
-
Bartosz Golaszewski authored
Platform data pointer may be NULL. We check it everywhere but in one place. Fix it. Fixes: 8af70cd2 ("memory: aemif: add support for board files") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: stable@vger.kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
-
https://github.com/Broadcom/stblinuxOlof Johansson authored
This pull request contains Broadcom ARM/ARM64 SoCs drivers fixes for 4.19, please pull the following: - Peter adds an alias to the Raspberry Pi HWMON driver that was just merged as part of the 4.19 merge window * tag 'arm-soc/for-4.19/drivers-fixes' of https://github.com/Broadcom/stblinux: hwmon: rpi: add module alias to raspberrypi-hwmon Signed-off-by: Olof Johansson <olof@lixom.net>
-
Sudeep Holla authored
Firmware can provide zero as values for sustained performance level and corresponding sustained frequency in kHz in order to hide the actual frequencies and provide only abstract values. It may endup with divide by zero scenario resulting in kernel panic. Let's set the multiplication factor to one if either one or both of them (sustained_perf_level and sustained_freq) are set to zero. Fixes: a9e3fbfa ("firmware: arm_scmi: add initial support for performance protocol") Reported-by: Ionela Voinescu <ionela.voinescu@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 05 Sep, 2018 1 commit
-
-
Peter Robinson authored
The raspberrypi-hwmon driver doesn't automatically load, although it does work when loaded, by adding the alias it auto loads as expected when built as a module. Tested on RPi2/RPi3 on 32 bit kernel and RPi3B+ on aarch64 with Fedora 28 and a patched 4.18 RC kernel. Fixes: 3c493c885cf ("hwmon: Add support for RPi voltage sensor") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> CC: Stefan Wahren <stefan.wahren@i2se.com> CC: Eric Anholt <eric@anholt.net> Acked-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
-
- 02 Sep, 2018 1 commit
-
-
Olof Johansson authored
Merge tag 'omap-for-v4.19/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Fixes for omap variants against v4.19-rc1 These are mostly fixes related to using ti-sysc interconnect target module driver for accessing right register offsets for sgx and cpsw and for no_console_suspend regression. There is also a droid4 emmc fix where emmc may not get detected for some models, and vibrator dts mismerge fix. And we have a file permission fix for am335x-osd3358-sm-red.dts that just got added. And we must tag RTC as system-power-controller for am437x for PMIC to shut down during poweroff. * tag 'omap-for-v4.19/fixes-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap4-droid4: Fix emmc errors seen on some devices ARM: dts: Fix file permission for am335x-osd3358-sm-red.dts arm: dts: am4372: setup rtc as system-power-controller ARM: dts: omap4-droid4: fix vibrations on Droid 4 bus: ti-sysc: Fix no_console_suspend handling bus: ti-sysc: Fix module register ioremap for larger offsets ARM: OMAP2+: Fix module address for modules using mpu_rt_idx ARM: OMAP2+: Fix null hwmod for ti-sysc debug Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 30 Aug, 2018 2 commits
-
-
Colin Ian King authored
Pointer 'priv' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: variable 'priv' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
-
Rob Herring authored
Use the of_get_child_by_name() helper instead of open coding searching for the 'firmware' child node. This removes directly accessing the name pointer as well. Cc: Qiang Zhao <qiang.zhao@nxp.com> Cc: Li Yang <leoyang.li@nxp.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Qiang Zhao <qiang.zhao@nxp.com> Signed-off-by: Li Yang <leoyang.li@nxp.com>
-
- 29 Aug, 2018 3 commits
-
-
Nishanth Menon authored
Enable K3 SoC platform for TI's AM6 SoC. Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Linus Walleij authored
This updates the ARM Versatile defconfig to the latest Kconfig structural changes and adds the DUMB VGA bridge driver so that VGA works out of the box, e.g. with QEMU. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'imx-fixes-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 4.19: - i.MX display folks decided to switch MXS display driver from legacy FB to DRM during 4.19 merge window. It leads to a fallout on some Freescale/NXP development boards with Seiko 43WVF1G panel, because this DRM panel driver is not enabled in i.MX defconfig. Here is a series from Fabio to convert i.MX23/28 EVK DT to Seiko 43WVF1G panel bindings and enable the panel driver in i.MX defconfig, so that users can still get functional LCD on these boards by default. - A fix from Leonard to revert incorrect legacy PCI irq mapping in i.MX7 device tree, that was caused by document errors. * tag 'imx-fixes-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: imx_v6_v7_defconfig: Select CONFIG_DRM_PANEL_SEIKO_43WVF1G ARM: mxs_defconfig: Select CONFIG_DRM_PANEL_SEIKO_43WVF1G ARM: dts: imx23-evk: Convert to the new display bindings ARM: dts: imx23-evk: Move regulators outside simple-bus ARM: dts: imx28-evk: Convert to the new display bindings ARM: dts: imx28-evk: Move regulators outside simple-bus Revert "ARM: dts: imx7d: Invert legacy PCI irq mapping" Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 28 Aug, 2018 3 commits
-
-
Tony Lindgren authored
Otherwise we can get the following errors occasionally on some devices: mmc1: tried to HW reset card, got error -110 mmcblk1: error -110 requesting status mmcblk1: recovery failed! print_req_error: I/O error, dev mmcblk1, sector 14329 ... I have one device that hits this error almost on every boot, and another one that hits it only rarely with the other ones I've used behave without problems. I'm not sure if the issue is related to a particular eMMC card model, but in case it is, both of the machines with issues have: # cat /sys/class/mmc_host/mmc1/mmc1:0001/manfid \ /sys/class/mmc_host/mmc1/mmc1:0001/oemid \ /sys/class/mmc_host/mmc1/mmc1:0001/name 0x000045 0x0100 SEM16G and the working ones have: 0x000011 0x0100 016G92 Note that "ti,non-removable" is different as omap_hsmmc_reg_get() does not call omap_hsmmc_disable_boot_regulators() if no_regulator_off_init is set. And currently we set no_regulator_off_init only for "ti,non-removable" and not for "non-removable". It seems that we should have "non-removable" with some other mmc generic property behave in the same way instead of having to use a non-generic property. But let's fix the issue first. Fixes: 7e2f8c0a ("ARM: dts: Add minimal support for motorola droid 4 xt894") Cc: Marcel Partap <mpartap@gmx.net> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Michael Scott <hashcode0f@gmail.com> Cc: NeKit <nekit1000@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Tony Lindgren authored
-
Neeraj Dantu authored
Fix wrong mode for dts file added by commit bb3e3fbb ("ARM: dts: Add DT support for Octavo Systems OSD3358-SM-RED based on TI AM335x"). Signed-off-by: Neeraj Dantu <neeraj.dantu@octavosystems.com> CC: Robert Nelson <robertcnelson@gmail.com> CC: Jason Kridner <jkridner@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
- 27 Aug, 2018 8 commits
-
-
Icenowy Zheng authored
Currently the enabled MMC controllers on Pine H64 do not have bus-width set, which make them fall back to 1-bit mode and become quite slow. Fix this by add the corresponding bus-width properties. Fixes: ecbd6118 ("arm64: allwinner: h6: enable MMC0/2 on Pine H64") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
-
Fabio Estevam authored
imx6sl-evk, imx6sll-evk and imx6sx-sdb boards use a Seiko 43WVF1G panel. Now that the DRM mxsfb driver is the one selected by default, let's also select CONFIG_DRM_PANEL_SEIKO_43WVF1G so that these boards continue to have a working display by default. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
imx23-evk and imx28-evk boards use a Seiko 43WVF1G panel. Now that the DRM mxsfb driver is the one selected by default, let's also select CONFIG_DRM_PANEL_SEIKO_43WVF1G so that these boards continue to have a working display by default. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
imx23-evk board has a Seiko 43WVF1G parallel display. Instead of hardcoding the display timings in the device tree, use the "sii,43wvf1g" compatible instead. This aligns with the new mxsfb bindings scheme documented at: Documentation/devicetree/bindings/display/mxsfb.txt Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
It is recommended to place regulators outside simple-bus, so move them accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
imx28-evk board has a Seiko 43WVF1G parallel display. Instead of hardcoding the display timings in the device tree, use the "sii,43wvf1g" compatible instead. This aligns with the new mxsfb bindings scheme documented at: Documentation/devicetree/bindings/display/mxsfb.txt Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Fabio Estevam authored
It is recommended to place regulators outside simple-bus, so move them accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
Leonard Crestez authored
This reverts commit 1c86c9dd. That commit followed the reference manual but unfortunately the imx7d manual is incorrect. Tested with ath9k pcie card and confirmed internally. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Acked-by: Lucas Stach <l.stach@pengutronix.de> Fixes: 1c86c9dd ("ARM: dts: imx7d: Invert legacy PCI irq mapping") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
-
- 26 Aug, 2018 3 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer update from Thomas Gleixner: "New defines for the compat time* types so they can be shared between 32bit and 64bit builds. Not used yet, but merging them now allows the actual conversions to be merged through different maintainer trees without dependencies We still have compat interfaces for 32bit on 64bit even with the new 2038 safe timespec/val variants because pointer size is different. And for the old style timespec/val interfaces we need yet another 'compat' interface for both 32bit native and 32bit on 64bit" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: y2038: Provide aliases for compat helpers
-
git://git.infradead.org/users/willy/linux-daxLinus Torvalds authored
Pull IDA updates from Matthew Wilcox: "A better IDA API: id = ida_alloc(ida, GFP_xxx); ida_free(ida, id); rather than the cumbersome ida_simple_get(), ida_simple_remove(). The new IDA API is similar to ida_simple_get() but better named. The internal restructuring of the IDA code removes the bitmap preallocation nonsense. I hope the net -200 lines of code is convincing" * 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax: (29 commits) ida: Change ida_get_new_above to return the id ida: Remove old API test_ida: check_ida_destroy and check_ida_alloc test_ida: Convert check_ida_conv to new API test_ida: Move ida_check_max test_ida: Move ida_check_leaf idr-test: Convert ida_check_nomem to new API ida: Start new test_ida module target/iscsi: Allocate session IDs from an IDA iscsi target: fix session creation failure handling drm/vmwgfx: Convert to new IDA API dmaengine: Convert to new IDA API ppc: Convert vas ID allocation to new IDA API media: Convert entity ID allocation to new IDA API ppc: Convert mmu context allocation to new IDA API Convert net_namespace to new IDA API cb710: Convert to new IDA API rsxx: Convert to new IDA API osd: Convert to new IDA API sd: Convert to new IDA API ...
-