- 25 May, 2017 40 commits
-
-
Ari Kauppi authored
commit b550a32e upstream. UBSAN: Undefined behaviour in fs/nfsd/nfs4proc.c:1262:34 shift exponent 128 is too large for 32-bit type 'int' Depending on compiler+architecture, this may cause the check for layout_type to succeed for overly large values (which seems to be the case with amd64). The large value will be later used in de-referencing nfsd4_layout_ops for function pointers. Reported-by:
Jani Tuovila <tuovila@synopsys.com> Signed-off-by:
Ari Kauppi <ari@synopsys.com> [colin.king@canonical.com: use LAYOUT_TYPE_MAX instead of 32] Reviewed-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Trond Myklebust authored
commit 2e84611b upstream. The intention in the original patch was to release the lock when we put the inode, however something got screwed up. Reported-by:
Jason Yan <yanaijie@huawei.com> Fixes: 7b410d9c ("pNFS: Delay getting the layout header in..") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit 260f32ad upstream. The check in nfs4_ff_layout_prepare_ds() seems to be missing. Signed-off-by:
-
Benjamin Coddington authored
commit ae97aa52 upstream. Prevent a deadlock that can occur if we wait on allocations that try to write back our pages. Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Fixes: 00bfa30a ("NFS: Create a common pgio_alloc and pgio_release...") Signed-off-by:
-
Fred Isaman authored
commit 1f84ccdf upstream. Signed-off-by:
Fred Isaman <fred.isaman@gmail.com> Fixes: 0bcbf039 ("nfs: handle request add failure properly") Signed-off-by:
-
Trond Myklebust authored
commit 56e0d71e upstream. If the server fails to return the attributes as part of an OPEN reply, and then reboots, we can end up hanging. The reason is that the client attempts to send a GETATTR in order to pick up the missing OPEN call, but fails to release the slot first, causing reboot recovery to deadlock. Signed-off-by:
-
Mario Kleiner authored
commit e345da82 upstream. The builtin eDP panel in the HP zBook 17 G2 supports 10 bpc, as advertised by the Laptops product specs and verified via injecting a fixed edid + photometer measurements, but edid reports unknown depth, so drivers fall back to 6 bpc. Add a quirk to get the full 10 bpc. Signed-off-by:
Mario Kleiner <mario.kleiner.de@gmail.com> Acked-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1492787108-23959-1-git-send-email-mario.kleiner.de@gmail.comSigned-off-by:
-
Alexander Couzens authored
commit 6a623e07 upstream. The old 1-bit hamming layout requires ECC data to be placed at a fixed offset, and not necessarily at the end of the OOB area. Add this old layout back in order to fix legacy setups. Fixes: 41b207a7 ("mtd: nand: implement the default mtd_ooblayout_ops") Signed-off-by:
Alexander Couzens <lynxis@fe80.eu> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Roger Quadros authored
commit 2d283ede upstream. commit c9711ec5 ("mtd: nand: omap: Clean up device tree support") caused the parent device name to be changed from "omap2-nand.0" to "<base address>.nand" (e.g. 30000000.nand on omap3 platforms). This caused mtd->name to be changed as well. This breaks partition creation via mtdparts passed by u-boot as it uses "omap2-nand.0" for the mtd-id. Fix this by explicitly setting the mtd->name to "omap2-nand.<CS number>" if it isn't already set by nand_set_flash_node(). CS number is the NAND controller instance ID. Fixes: c9711ec5 ("mtd: nand: omap: Clean up device tree support") Reported-by:
Leto Enrico <enrico.leto@siemens.com> Reported-by:
Adam Ford <aford173@gmail.com> Suggested-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
-
Simon Baatz authored
commit 675b11d9 upstream. The clk handling in orion_nand.c had two problems: - In the probe function, clk_put() was called for an enabled clock, which violates the API (see documentation for clk_put() in include/linux/clk.h) - In the error path of the probe function, clk_put() could be called twice for the same clock. In order to clean this up, use the managed function devm_clk_get() and store the pointer to the clk in the driver data. Fixes: baffab28 ('ARM: Orion: fix driver probe error handling with respect to clk') Signed-off-by:
Simon Baatz <gmbnomis@gmail.com> Signed-off-by:
-
Lukas Wunner authored
commit ea00353f upstream. Laurent Pinchart reported that the Renesas R-Car H2 Lager board (r8a7790) crashes during suspend tests. Geert Uytterhoeven managed to reproduce the issue on an M2-W Koelsch board (r8a7791): It occurs when the PME scan runs, once per second. During PME scan, the PCI host bridge (rcar-pci) registers are accessed while its module clock has already been disabled, leading to the crash. One reproducer is to configure s2ram to use "s2idle" instead of "deep" suspend: # echo 0 > /sys/module/printk/parameters/console_suspend # echo s2idle > /sys/power/mem_sleep # echo mem > /sys/power/state Another reproducer is to write either "platform" or "processors" to /sys/power/pm_test. It does not (or is less likely) to happen during full system suspend ("core" or "none") because system suspend also disables timers, and thus the workqueue handling PME scans no longer runs. Geert believes the issue may still happen in the small window between disabling module clocks and disabling timers: # echo 0 > /sys/module/printk/parameters/console_suspend # echo platform > /sys/power/pm_test # Or "processors" # echo mem > /sys/power/state (Make sure CONFIG_PCI_RCAR_GEN2 and CONFIG_USB_OHCI_HCD_PCI are enabled.) Rafael Wysocki agrees that PME scans should be suspended before the host bridge registers become inaccessible. To that end, queue the task on a workqueue that gets frozen before devices suspend. Rafael notes however that as a result, some wakeup events may be missed if they are delivered via PME from a device without working IRQ (which hence must be polled) and occur after the workqueue has been frozen. If that turns out to be an issue in practice, it may be possible to solve it by calling pci_pme_list_scan() once directly from one of the host bridge's pm_ops callbacks. Stacktrace for posterity: PM: Syncing filesystems ... [ 38.566237] done. PM: Preparing system for sleep (mem) Freezing user space processes ... [ 38.579813] (elapsed 0.001 seconds) done. Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. PM: Suspending system (mem) PM: suspend of devices complete after 152.456 msecs PM: late suspend of devices complete after 2.809 msecs PM: noirq suspend of devices complete after 29.863 msecs suspend debug: Waiting for 5 second(s). Unhandled fault: asynchronous external abort (0x1211) at 0x00000000 pgd = c0003000 [00000000] *pgd=80000040004003, *pmd=00000000 Internal error: : 1211 [#1] SMP ARM Modules linked in: CPU: 1 PID: 20 Comm: kworker/1:1 Not tainted 4.9.0-rc1-koelsch-00011-g68db9bc8 #3383 Hardware name: Generic R8A7791 (Flattened Device Tree) Workqueue: events pci_pme_list_scan task: eb56e140 task.stack: eb58e000 PC is at pci_generic_config_read+0x64/0x6c LR is at rcar_pci_cfg_base+0x64/0x84 pc : [<c041d7b4>] lr : [<c04309a0>] psr: 600d0093 sp : eb58fe98 ip : c041d750 fp : 00000008 r10: c0e2283c r9 : 00000000 r8 : 600d0013 r7 : 00000008 r6 : eb58fed6 r5 : 00000002 r4 : eb58feb4 r3 : 00000000 r2 : 00000044 r1 : 00000008 r0 : 00000000 Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 30c5387d Table: 6a9f6c80 DAC: 55555555 Process kworker/1:1 (pid: 20, stack limit = 0xeb58e210) Stack: (0xeb58fe98 to 0xeb590000) fe80: 00000002 00000044 fea0: eb6f5800 c041d9b0 eb58feb4 00000008 00000044 00000000 eb78a000 eb78a000 fec0: 00000044 00000000 eb9aff00 c0424bf0 eb78a000 00000000 eb78a000 c0e22830 fee0: ea8a6fc0 c0424c5c eaae79c0 c0424ce0 eb55f380 c0e22838 eb9a9800 c0235fbc ff00: eb55f380 c0e22838 eb55f380 eb9a9800 eb9a9800 eb58e000 eb9a9824 c0e02100 ff20: eb55f398 c02366c4 eb56e140 eb5631c0 00000000 eb55f380 c023641c 00000000 ff40: 00000000 00000000 00000000 c023a928 cd105598 00000000 40506a34 eb55f380 ff60: 00000000 00000000 dead4ead ffffffff ffffffff eb58ff74 eb58ff74 00000000 ff80: 00000000 dead4ead ffffffff ffffffff eb58ff90 eb58ff90 eb58ffac eb5631c0 ffa0: c023a844 00000000 00000000 c0206d68 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffe0: 00000000 00000000 00000000 00000000 00000013 00000000 3a81336c 10ccd1dd [<c041d7b4>] (pci_generic_config_read) from [<c041d9b0>] (pci_bus_read_config_word+0x58/0x80) [<c041d9b0>] (pci_bus_read_config_word) from [<c0424bf0>] (pci_check_pme_status+0x34/0x78) [<c0424bf0>] (pci_check_pme_status) from [<c0424c5c>] (pci_pme_wakeup+0x28/0x54) [<c0424c5c>] (pci_pme_wakeup) from [<c0424ce0>] (pci_pme_list_scan+0x58/0xb4) [<c0424ce0>] (pci_pme_list_scan) from [<c0235fbc>] (process_one_work+0x1bc/0x308) [<c0235fbc>] (process_one_work) from [<c02366c4>] (worker_thread+0x2a8/0x3e0) [<c02366c4>] (worker_thread) from [<c023a928>] (kthread+0xe4/0xfc) [<c023a928>] (kthread) from [<c0206d68>] (ret_from_fork+0x14/0x2c) Code: ea000000 e5903000 f57ff04f e3a00000 (e5843000) ---[ end trace 667d43ba3aa9e589 ]--- Fixes: df17e62e ("PCI: Add support for polling PME state on suspended legacy PCI devices") Reported-and-tested-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reported-and-tested-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Cc: Simon Horman <horms+renesas@verge.net.au> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by:
-
David Woodhouse authored
commit cef4d023 upstream. The /proc/bus/pci mmap interface allows the user to specify whether they want WC or not. Don't let them do so on non-prefetchable BARs. Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
-
David Woodhouse authored
commit 17caf567 upstream. Don't match MMIO maps with I/O BARs and vice versa. Signed-off-by:
-
David Woodhouse authored
commit 6bccc7f4 upstream. In the PCI_MMAP_PROCFS case when the address being passed by the user is a 'user visible' resource address based on the bus window, and not the actual contents of the resource, that's what we need to be checking it against. Signed-off-by:
-
K. Y. Srinivasan authored
commit 433fcf6b upstream. When we have 32 or more CPUs in the affinity mask, we should use a special constant to specify that to the host. Fix this issue. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Long Li <longli@microsoft.com> Signed-off-by:
-
K. Y. Srinivasan authored
commit 59c58cee upstream. The memory allocation here needs to be non-blocking. Fix the issue. Signed-off-by:
-
Tomasz Nowicki authored
commit cd183740 upstream. Currently SoCs pass2.x do not emulate EA headers for ACPI boot method at all. However, for pass2.x some devices (like EDAC) advertise incorrect base addresses in their BARs which results in driver probe failure during resource request. Since all problematic blocks are on 2nd NUMA node under domain 10 add necessary quirk entry to obtain BAR addresses correction using EA header emulation. Fixes: 44f22bd9 ("PCI: Add MCFG quirks for Cavium ThunderX pass2.x host controller") Signed-off-by:
Tomasz Nowicki <tn@semihalf.com> Signed-off-by:
Robert Richter <rrichter@cavium.com> Signed-off-by:
-
Bjorn Helgaas authored
commit ced414a1 upstream. With no blank lines, it's not obvious where the macro definitions end and the uses begin. Add some blank lines and reorder the ThunderX definitions. No functional change intended. Signed-off-by:
-
Dawei Chien authored
commit 05d7839a upstream. If thermal bank with 4 sensors, thermal driver should read TEMP_MSR3. However, currently thermal driver would not read TEMP_MSR3 since mt8173 thermal driver only use 3 sensors on each thermal bank at the same time, so this patch would not effect temperature. Only if mt mt8173 thermal driver use 4 sensors on any thermal bank, would read third sensor two times, and lose fourth sensor of vale. Fixes: b7cf0053 ("thermal: Add Mediatek thermal driver for mt2701.") Reviewed-by:
Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
Dawei Chien <dawei.chien@mediatek.com> Signed-off-by:
Eduardo Valentin <edubezval@gmail.com> Signed-off-by:
-
Thomas Gleixner authored
commit 30e7d894 upstream. Enabling the tracer selftest triggers occasionally the warning in text_poke(), which warns when the to be modified page is not marked reserved. The reason is that the tracer selftest installs kprobes on functions marked __init for testing. These probes are removed after the tests, but that removal schedules the delayed kprobes_optimizer work, which will do the actual text poke. If the work is executed after the init text is freed, then the warning triggers. The bug can be reproduced reliably when the work delay is increased. Flush the optimizer work and wait for the optimizing/unoptimizing lists to become empty before returning from the kprobes tracer selftest. That ensures that all operations which were queued due to the probes removal have completed. Link: http://lkml.kernel.org/r/20170516094802.76a468bb@gandalf.local.homeSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Fixes: 6274de49 ("kprobes: Support delayed unoptimizing") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Arnd Bergmann authored
commit 76cefef8 upstream. gcc-7 notices that the length we pass to strncat is wrong: drivers/firmware/ti_sci.c: In function 'ti_sci_probe': drivers/firmware/ti_sci.c:204:32: error: specified bound 50 equals the size of the destination [-Werror=stringop-overflow=] Instead of the total length, we must pass the length of the remaining space here. Fixes: aa276781 ("firmware: Add basic support for TI System Control Interface (TI-SCI) protocol") Acked-by:
Nishanth Menon <nm@ti.com> Acked-by:
Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Masami Hiramatsu authored
commit 5b4236e1 upstream. Since read_initrd() invokes alloc_bootmem() for allocating memory to load initrd image, it must be called after init_bootmem. This makes read_initrd() called directly from setup_arch() after init_bootmem() and mem_total_pages(). Fixes: b6323697 ("um: Setup physical memory in setup_arch()") Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Lars Ellenberg authored
commit a00ebd1c upstream. When killing kref_sub(), the unconditional additional kref_get() was not properly paired with the necessary kref_put(), causing a leak of struct drbd_requests (~ 224 Bytes) per submitted bio, and breaking DRBD in general, as the destructor of those "drbd_requests" does more than just the mempoll_free(). Fixes: bdfafc4f ("locking/atomic, kref: Kill kref_sub()") Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Al Viro authored
commit a8c39544 upstream. failing sys_wait4() won't fill struct rusage... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Suzuki K Poulose authored
commit 2952a607 upstream. Make sure we don't use a cached value of the KVM stage2 PGD while resetting the PGD. Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Reviewed-by:
Christoffer Dall <cdall@linaro.org> Signed-off-by:
-
Suzuki K Poulose authored
commit 0c428a6a upstream. We yield the kvm->mmu_lock occassionaly while performing an operation (e.g, unmap or permission changes) on a large area of stage2 mappings. However this could possibly cause another thread to clear and free up the stage2 page tables while we were waiting for regaining the lock and thus the original thread could end up in accessing memory that was freed. This patch fixes the problem by making sure that the stage2 pagetable is still valid after we regain the lock. The fact that mmu_notifer->release() could be called twice (via __mmu_notifier_release and mmu_notifier_unregsister) enhances the possibility of hitting this race where there are two threads trying to unmap the entire guest shadow pages. While at it, cleanup the redudant checks around cond_resched_lock in stage2_wp_range(), as cond_resched_lock already does the same checks. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: andreyknvl@google.com Cc: Paolo Bonzini <pbonzini@redhat.com> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Suzuki K Poulose authored
commit 6c0d706b upstream. In kvm_free_stage2_pgd() we check the stage2 PGD before holding the lock and proceed to take the lock if it is valid. And we unmap the page tables, followed by releasing the lock. We reset the PGD only after dropping this lock, which could cause a race condition where another thread waiting on or even holding the lock, could potentially see that the PGD is still valid and proceed to perform a stage2 operation and later encounter a NULL PGD. [223090.242280] Unable to handle kernel NULL pointer dereference at virtual address 00000040 [223090.262330] PC is at unmap_stage2_range+0x8c/0x428 [223090.262332] LR is at kvm_unmap_hva_handler+0x2c/0x3c [223090.262531] Call trace: [223090.262533] [<ffff0000080adb78>] unmap_stage2_range+0x8c/0x428 [223090.262535] [<ffff0000080adf40>] kvm_unmap_hva_handler+0x2c/0x3c [223090.262537] [<ffff0000080ace2c>] handle_hva_to_gpa+0xb0/0x104 [223090.262539] [<ffff0000080af988>] kvm_unmap_hva+0x5c/0xbc [223090.262543] [<ffff0000080a2478>] kvm_mmu_notifier_invalidate_page+0x50/0x8c [223090.262547] [<ffff0000082274f8>] __mmu_notifier_invalidate_page+0x5c/0x84 [223090.262551] [<ffff00000820b700>] try_to_unmap_one+0x1d0/0x4a0 [223090.262553] [<ffff00000820c5c8>] rmap_walk+0x1cc/0x2e0 [223090.262555] [<ffff00000820c90c>] try_to_unmap+0x74/0xa4 [223090.262557] [<ffff000008230ce4>] migrate_pages+0x31c/0x5ac [223090.262561] [<ffff0000081f869c>] compact_zone+0x3fc/0x7ac [223090.262563] [<ffff0000081f8ae0>] compact_zone_order+0x94/0xb0 [223090.262564] [<ffff0000081f91c0>] try_to_compact_pages+0x108/0x290 [223090.262569] [<ffff0000081d5108>] __alloc_pages_direct_compact+0x70/0x1ac [223090.262571] [<ffff0000081d64a0>] __alloc_pages_nodemask+0x434/0x9f4 [223090.262572] [<ffff0000082256f0>] alloc_pages_vma+0x230/0x254 [223090.262574] [<ffff000008235e5c>] do_huge_pmd_anonymous_page+0x114/0x538 [223090.262576] [<ffff000008201bec>] handle_mm_fault+0xd40/0x17a4 [223090.262577] [<ffff0000081fb324>] __get_user_pages+0x12c/0x36c [223090.262578] [<ffff0000081fb804>] get_user_pages_unlocked+0xa4/0x1b8 [223090.262579] [<ffff0000080a3ce8>] __gfn_to_pfn_memslot+0x280/0x31c [223090.262580] [<ffff0000080a3dd0>] gfn_to_pfn_prot+0x4c/0x5c [223090.262582] [<ffff0000080af3f8>] kvm_handle_guest_abort+0x240/0x774 [223090.262584] [<ffff0000080b2bac>] handle_exit+0x11c/0x1ac [223090.262586] [<ffff0000080ab99c>] kvm_arch_vcpu_ioctl_run+0x31c/0x648 [223090.262587] [<ffff0000080a1d78>] kvm_vcpu_ioctl+0x378/0x768 [223090.262590] [<ffff00000825df5c>] do_vfs_ioctl+0x324/0x5a4 [223090.262591] [<ffff00000825e26c>] SyS_ioctl+0x90/0xa4 [223090.262595] [<ffff000008085d84>] el0_svc_naked+0x38/0x3c This patch moves the stage2 PGD manipulation under the lock. Reported-by:
Alexander Graf <agraf@suse.de> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by:
-
Huacai Chen authored
commit 17c99d94 upstream. Some newer Loongson-3 have 64 bytes cache lines, so select MIPS_L1_CACHE_SHIFT_6. Signed-off-by:
Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J . Hill <Steven.Hill@caviumnetworks.com> Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15755/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Jon Derrick authored
commit f63572df upstream. CMB doesn't get unmapped until removal while getting remapped on every reset. Add the unmapping and sysfs file removal to the reset path in nvme_pci_disable to match the mapping path in nvme_pci_enable. Fixes: 202021c1 ("nvme : Add sysfs entry for NVMe CMBs when appropriate") Signed-off-by:
Jon Derrick <jonathan.derrick@intel.com> Acked-by:
Keith Busch <keith.busch@intel.com> Reviewed-By:
Stephen Bates <sbates@raithlin.com> Signed-off-by:
-
Thomas Gleixner authored
commit 2c4569ca upstream. irq_set_chained_handler_and_data() sets up the chained interrupt and then stores the handler data. That's racy against an immediate interrupt which gets handled before the store of the handler data happened. The handler will dereference a NULL pointer and crash. Cure it by storing handler data before installing the chained handler. Reported-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
-
Johan Hovold authored
commit 41318a2b upstream. Add missing endianness conversion when using the USB device-descriptor idProduct field to apply a hardware quirk. Fixes: 1ba47da5 ("uwb: add the i1480 DFU driver") Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Daniel Micay authored
stackprotector: Increase the per-task stack canary's random range from 32 bits to 64 bits on 64-bit platforms commit 5ea30e4e upstream. The stack canary is an 'unsigned long' and should be fully initialized to random data rather than only 32 bits of random data. Signed-off-by:
Daniel Micay <danielmicay@gmail.com> Acked-by:
Arjan van de Ven <arjan@linux.intel.com> Acked-by:
Rik van Riel <riel@redhat.com> Acked-by:
Kees Cook <keescook@chromium.org> Cc: Arjan van Ven <arjan@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-hardening@lists.openwall.com Link: http://lkml.kernel.org/r/20170504133209.3053-1-danielmicay@gmail.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
James Hogan authored
commit 3a158a62 upstream. The metag implementation of strncpy_from_user() doesn't validate the src pointer, which could allow reading of arbitrary kernel memory. Add a short access_ok() check to prevent that. Its still possible for it to read across the user/kernel boundary, but it will invariably reach a NUL character after only 9 bytes, leaking only a static kernel address being loaded into D0Re0 at the beginning of __start, which is acceptable for the immediate fix. Reported-by:
James Hogan <james.hogan@imgtec.com> Cc: linux-metag@vger.kernel.org Signed-off-by:
-
James Hogan authored
commit 8a8b5663 upstream. The __user_bad() macro used by access_ok() has a few corner cases noticed by Al Viro where it doesn't behave correctly: - The kernel range check has off by 1 errors which permit access to the first and last byte of the kernel mapped range. - The kernel range check ends at LINCORE_BASE rather than META_MEMORY_LIMIT, which is ineffective when the kernel is in global space (an extremely uncommon configuration). There are a couple of other shortcomings here too: - Access to the whole of the other address space is permitted (i.e. the global half of the address space when the kernel is in local space). This isn't ideal as it could theoretically still contain privileged mappings set up by the bootloader. - The size argument is unused, permitting user copies which start on valid pages at the end of the user address range and cross the boundary into the kernel address space (e.g. addr = 0x3ffffff0, size > 0x10). It isn't very convenient to add size checks when disallowing certain regions, and it seems far safer to be sure and explicit about what userland is able to access, so invert the logic to allow certain regions instead, and fix the off by 1 errors and missing size checks. This also allows the get_fs() == KERNEL_DS check to be more easily optimised into the user address range case. We now have 3 such allowed regions: - The user address range (incorporating the get_fs() == KERNEL_DS check). - NULL (some kernel code expects this to work, and we'll always catch the fault anyway). - The core code memory region. Fixes: 373cd784 ("metag: Memory handling") Reported-by:
-
Li, Fei authored
commit 41dc750e upstream. In case of there is no cpuidle devices registered, dev will be null, and panic will be triggered like below; In this patch, add checking of dev before usage, like that done in cpuidle_idle_call. Panic without fix: [ 184.961328] BUG: unable to handle kernel NULL pointer dereference at (null) [ 184.961328] IP: cpuidle_use_deepest_state+0x30/0x60 ... [ 184.961328] play_idle+0x8d/0x210 [ 184.961328] ? __schedule+0x359/0x8e0 [ 184.961328] ? _raw_spin_unlock_irqrestore+0x28/0x50 [ 184.961328] ? kthread_queue_delayed_work+0x41/0x80 [ 184.961328] clamp_idle_injection_func+0x64/0x1e0 Fixes: bb8313b6 (cpuidle: Allow enforcing deepest idle state selection) Signed-off-by:
Li, Fei <fei.li@intel.com> Tested-by:
Shi, Feng <fengx.shi@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
KarimAllah Ahmed authored
commit f73a7eee upstream. Ever since commit 091d42e4 ("iommu/vt-d: Copy translation tables from old kernel") the kdump kernel copies the IOMMU context tables from the previous kernel. Each device mappings will be destroyed once the driver for the respective device takes over. This unfortunately breaks the workflow of mapping and unmapping a new context to the IOMMU. The mapping function assumes that either: 1) Unmapping did the proper IOMMU flushing and it only ever flush if the IOMMU unit supports caching invalid entries. 2) The system just booted and the initialization code took care of flushing all IOMMU caches. This assumption is not true for the kdump kernel since the context tables have been copied from the previous kernel and translations could have been cached ever since. So make sure to flush the IOTLB as well when we destroy these old copied mappings. Cc: Joerg Roedel <joro@8bytes.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Anthony Liguori <aliguori@amazon.com> Signed-off-by:
KarimAllah Ahmed <karahmed@amazon.de> Acked-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Malcolm Priestley authored
commit 95d93e27 upstream. TID 7 is a valid value for QoS IEEE 802.11e. The switch statement that follows states 7 is valid. Remove function IsACValid and use the default case to filter invalid TIDs. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Malcolm Priestley authored
commit 90be652c upstream. EPROM_CMD is 2 byte aligned on PCI map so calling with rtl92e_readl will return invalid data so use rtl92e_readw. The device is unable to select the right eeprom type. Signed-off-by:
-
Malcolm Priestley authored
commit 867510bd upstream. BSSIDR has two byte alignment on PCI ioremap correct the write by swapping to 16 bits first. This fixes a problem that the device associates fail because the filter is not set correctly. Signed-off-by:
-
Malcolm Priestley authored
commit baabd567 upstream. The driver attempts to alter memory that is mapped to PCI device. This is because tx_fwinfo_8190pci points to skb->data Move the pci_map_single to when completed buffer is ready to be mapped with psdec is empty to drop on mapping error. Signed-off-by:
-
